Should I use Camera Raw 5.0 for JPEG photo editing?

Hello,
I have Camera Raw 5.0 through Bridge CS4 and I shoot photos on my Nikon D40X in JPEG. Should I NOT be using Camera Raw to edit my non-RAW photos? Is it degrading my images? I noticed when I did some editing and saved the photo, the new photo size was about 25% of the original JPEG size.
Thanks in advance!!

To tell you the truth, you might be better off just shooting RAW in the first place... but I'm surprised by your decrease in size... I can only echo the suggestion to check the JPEG quality box and the file format used. You didn't crop it to some different resolution, did you?
PS: I'm getting into photo editing pen tablets. You might try one some time for editing.

Similar Messages

Why should I use camera raw in bridge

I have CS4 and would like to know do I need a special camera to get raw in to bridge and when there what is different in bridge to using Photoshop?

You will need a camera that can produce Raw files (see the manual from your camera for that) and you will also have the proper Camera Raw plugin for the type of camera you are using. In short, when having updated CS4 and not owning a brand new type of Camera that is just released you should be able to use those Raw files in CS4.
ACR can be used in both Bridge and PS, they are the same but have a small difference in active save options (Bridge by default 'Done' and PS by default 'Open Images'). Best part if this that you can use both processors simultaneously. so when having multiple files processing in one you can start with settings on the other :-)
There is a whole lot more to learn about Raw, there are some good white papers, video tutorials and a very good and easy to read book (Real World Camera Raw CS4, Bruce Fraser and Jeff Schewe).

How do you use Camera Raw Editor to open jpeg files by default, not using "Open As"?

I've searched for the Camera Raw setting that is available from the Photoshop (not PSE8) menu but it is not even available in Photoshop Elements 8 that I've been able to see. Does anyone know where this setting is?

I had PSE8 set to open any file (tiff, jpeg and cr2) with the camera raw editor. I can not figure out how it got changed or remember where to make this a default option in PSE8. I found a video showing it available in Photoshop, main menu, camera raw and then you just check the boxes. I've been looking for the similar setting in PSE8 again because I'm working through some exercises in a book and it is a nuisance to navigate to the image using the "open as" command every time. I figured it would be just as easy to set the option by default, then, if I didn't want to use the raw editor, I could just click open from there. Help? Thanks so much!

I have cs5 for windows and can´t use camera raw (6.5) with nikon d800e

I have photoshop cs5 and can´t use camera raw (6.5) for nikon d800e.

You will need to update to the latest ACR ver 6.7.1 for Photoshop cs5.
If you go to Photoshop's Help menu > Updates..., it should be available for download.
Gene

Problems using Camera Raw function in Bridge CS5.1

Hey so I don't know what the heck is going on, but Camera Raw was working perfectly for me when I got this computer. It's a work computer, and all the programs were recently installed. I like using Camera Raw because of the easy basic editing and mass rendering (from .nef to .jpg) because I do a lot of shooting as a journalist.
Like I said, it was working fine for me the past three weeks. Now I get this error message:
Camera Raw editing is not enabled
Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature.
I just installed the program, alongside PSE 12 Editor, and I have no idea how to fix this. Obviously, I've opened both Bridge and PSE, so I have no idea what I'm supposed to do now.
Please please help. It's a MAJOR pain in the arse to have to edit every photo manually in PSE.

You can use PSE with multiple Raw files also but Camera Raw in PSE has very limited options compared to the full ACR and also you can't save as jpeg via PSE.
But do you have Photoshop CS5 installed because I can't find any info on that in your posts??
Bridge CS4 was the only version that worked with PS elements (PSE 8??) but after that they discontinued the connection and since then PSE again uses its own organizer. So it is either using PSE for your work or you have to use Photoshop and Bridge.
Adobe Camera Raw (ACR) is a plugin that comes with Photoshop. But Bridge has the option to also use this same plug in but it uses the PS version itself. If you open a Raw file in Bridge the normal way it opens in ACR via PS.
If you choose right mouse click menu 'Open in Camera Raw' it uses ACR via Bridge. You can use both ACR at the same time. e.g. open multiple files in Bridge to load them as 'filmstrip mode' in the ACR window. Make your changes and choose 'save image'. While this jobs is running you can't use PS until the saving has finished.
however if you return to Bridge and select another bunch and open this via 'Open in Camera Raw' the ACR window opens via Bridge. So while the first job is running in the background via PS you can start the second job via Bridge.
Be sure to have the latest updates and the latest ACR version for Camera Raw (in your case it should be both PS and Bridge CS5.1 and ACR 6.7)
In PS go to menu Photoshop / About Plug In / Camera Raw and this provides a window with the version of Camera Raw you are using.

Help for using camera raw in PSE 8/Bridge for Mac for the Canon 7D

Recently purchasing the Canon 7D, taking a few test photos in Raw, then trying to use Camera Raw in PSE8/Bridge for Mac is a problem. I cannot figure it out. Can anyone help this frustrated, novice computer user?

You need to update the camera raw plug-in for bridge and PSE 8 separately (they use two different copies). In Bridge, just go to Help>Updates which will install, I think, ACR 5.7, which works with your camera. (You can't update bridge beyond that version).
For PSE 8, go here, download the latest version and follow the instructions in the readme file.
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
Note that the directions may tell you that you can overwrite the old plug-in. That isn't true--you must remove it before putting the new one in there.

CS4 / camera raw 5.0.0.178 / 5dmiii - is it possible to update camera raw on cs4 for use w 5dmiii?

Hello,
I have CS4 (I know, I know behind the times) and use Camera Raw 5.0. I've just gotten the 5dmiii and Camera Raw won't read the files.
I tried to download the raw update as per this page:
http://blogs.adobe.com/lightroomjournal/2012/03/raw-support-in-lightroom-and-camera-raw.ht ml
But I realize this is only for CS5 and it is of course not working for me.
Is there a way to update CS4 to make it work with the 5dmiii? I would like to avoid purchasing cs5 or cs6 right now and stick with cs4.
Thanks!

Thanks for the recommendation on the PS forum - I've posted there.
I still believe that your tone and judgment, noting that my question is "utterly ridiculous," is unnecessary and regrettable on a public forum where I'm asking a technical question.
Nonetheless, still hope that your not-bad-day continues to be not-so-bad, or perhaps even gets a bit better.

Is there a download for lightroom2.7 that will allow it to use camera raw for a Canon T3i raw files?

Is there a download for lightroom2.7 that will allow it to use camera raw for a Canon T3i raw files?

Greylensmanta wrote:
Thank you for the imput. I don't know what you mean when you say LR doesn't use Adoble Camera Raw. My LR2.7 is able to process raw files from my 20D. I don't care if it does it with ACR or some other processing software. The issue is whether whatever software is used by LR can be updated to deal with new camera raw files. It is pretty annoying if it cannot be. I would even pay a reasonable amount if that were necessary.
ACR is a plug-in for Photoshop and Photoshop Elements which enables users to work on raw images from supported cameras. All of that technology that is in that plug-in is part of the Lightroom program, the plug-in is not used by Lightroom. ACR must be updated approximately 4 times each year in order to add support for new cameras and to make other changes in the plug-in. In order to get those changes in Lightroom, it is necessary to upgrade the entire Lightroom program. Interim releases are made available to Lightroom users who have purchased the program. For instance, if you purchased Lightroom 2, then versions 2.1, 2.2, 2.3, etc. are all available to you at no cost. But when Lightroom 3.0 is released or 4.0 is released, then it is necessary for you to purchase an upgrade in order to continue to get the updates.

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

Updating Camera Raw plug-in for CS5.1

I have recently updated to Lightroom 5.7 on my PC and also use Phototshop CS5.1. When I use LR and then try to use the Edit in CS5.1 option I get the error message saying I should upgrade to Camera Raw plug-in version 8.7. I cannot find any way of doing this as Photoshop says the plug-in is already up to date. Help!

PS CS5 can only use up to ACR 6.x, its just not possible to upgrade to ACR 8.7.
If you are sending raw files from Lightroom 5 to PS CS5 for further editing when you see the mismatch warning choose "render using Lightroom" if you use the option "open anyway" the ACR version may not be able to process all your Lightroom edits.
The latest version of LR 5.7.1 is the equivalent of ACR 8.7.1

Cannot Use Camera Raw out of LightRoom 4

Below is a lengthy dialogue that I just had with Tech Support via Chat regarding accessing Camera Raw directly out of LightRoom 4. The end result is that it can't be done. LightRoom 4 has it's own "Develop" section and if you try to "Edit in: PhotoShop 6" the RAW image will bypass Camera Raw and open directly into PhotoShop. Something that I was surprised at and frustrated by. I thought for sure I was missing somehting.
I do not recommend buying LightRoom other than a means of "organizing" our images. I simply use Bridgne and am able to open a Canon "CR2" Raw file directly into Camera Raw and then after making my adjustments directly into PhotoShop. LightRoom lacks Layers, Paths and Channels and a host of other wonderful adjustment / manipulation capabilites not found in LightRoom.
So, if you are like me and want to use Camera Raw prior to going to PhotoShop then LightRoom will not get you there. I spent a tremendous amount of time researching it thinking I must be missing something and then I contacted Support via Chat and we went through changing %AppData%, which only resulted in me losing all my PhotoShop Preferences! A total waste of the Technician's time and mine.
I share the below chat with you only to show you the ludicrous amount of time wasted when the answer remains the same: YOU CANNOT ACCESS CAMERA RAW DIRECTLY OUT OF LIGHTROOM 4
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 3 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with 'Soumyadeep'
Soumyadeep: Hello. Welcome to Adobe Technical Support.
Soumyadeep: Hi Fred!
Fred: Hi there my friend. I am trying to use Lightroom 4, but frankly am not happy with the way it handles RAW files.
Fred: I cannot open a Canon ".cr2" RAW file directly into Camera Raw from LightRoom.
Soumyadeep: I have received your query. Please allow me a moment to verify your account and to review the details of your request.
Fred: Thanks. I have also gone through all of the information I can find in the "Help Menu" looking up everything. Can't find a thing on LightRoom 4. I did not have this problem with Lightroom 3.
Fred: The RAW file that it references is "DNG".
Soumyadeep: I understand that you are unable to preview cr2 raw images in Lightroom 4, am I correct?
Fred: No, I can preview it, but when i want to open it the only choice I am given is CS6. I cannot open it into Camera Raw and it actually choses a completely different and inappropriate plug in from NIK Software.
Soumyadeep: Thank you for confirming.
Fred: I know I can change that in the "Prefernces" in Lightroom 4 but I can't find Camera Raw to select as the choice.
Soumyadeep: I will be glad to assist you with this.
Soumyadeep: May I have the serial number of the product please?
Fred: I just checked again and it is set to a NIK Software plugin as an external software to open the file.
Fred: Yes, let me get it for you.
Fred: Lightroom version: 4.1 [829322] Operating system: Windows 7 Business Edition Version: 6.1 [7601] Application architecture: x64 System architecture: x64 Physical processor count: 2 Processor speed: 2.1 GHz Built-in memory: 8123.8 MB Real memory available to Lightroom: 8123.8 MB Real memory used by Lightroom: 1687.3 MB (20.7%) Virtual memory used by Lightroom: 1657.0 MB Memory cache size: 1194.5 MB System DPI setting: 96 DPI Desktop composition enabled: Yes Displays: 1) 1360x768 Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.1 Library Path: C:\Users\FT\Pictures\Lightroom\Lightroom 4 Catalog.lrcat Settings Folder: C:\Users\FT\AppData\Roaming\Adobe\Lightroom Adapter #1: Vendor : 8086 Device : 2a42 Subsystem : 145110cf Revision : 7 Video Memory : 32 AudioDeviceIOBlockSize: 1024 AudioDeviceName: Speakers (2- USB Audio) AudioDeviceNumberOfChannels: 2 AudioDeviceSampleRate: 44100 Build: 6.0x552 Direct2DEnabled: false GL_ALPHA_BITS: 8 GL_BLUE_BITS: 8 GL_GREEN_BITS: 8 GL_MAX_3D_TEXTURE_SIZE: 128 GL_MAX_TEXTURE_SIZE: 4096 GL_MAX_TEXTURE_UNITS: 8 GL_MAX_VIEWPORT_DIMS: 4096,4096 GL_RED_BITS: 8 GL_RENDERER: Mobile Intel(R) 4 Series Express Chipset Family GL_SHADING_LANGUAGE_VERSION: 1.20 - Intel Build 8.15.10.1883 GL_VENDOR: Intel GL_VERSION: 2.1.0 - Build 8.15.10.1883 OGLEnabled: true OGLPresent: true GL_EXTENSIONS: GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_blend_color GL_EXT_abgr GL_EXT_texture3D GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_SGIS_texture_edge_clamp GL_SGIS_generate_mipmap GL_EXT_draw_range_elements GL_SGIS_texture_lod GL_EXT_rescale_normal GL_EXT_packed_pixels GL_EXT_separate_specular_color GL_ARB_multitexture GL_EXT_texture_env_combine GL_EXT_bgra GL_EXT_blend_func_separate GL_EXT_secondary_color GL_EXT_fog_coord GL_EXT_texture_env_add GL_ARB_texture_cube_map GL_ARB_transpose_matrix GL_ARB_texture_env_add GL_IBM_texture_mirrored_repeat GL_EXT_multi_draw_arrays GL_NV_blend_square GL_ARB_texture_compression GL_3DFX_texture_compression_FXT1 GL_EXT_texture_filter_anisotropic GL_ARB_texture_border_clamp GL_ARB_point_parameters GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_env_crossbar GL_EXT_texture_compression_s3tc GL_ARB_shadow GL_ARB_window_pos GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_ARB_vertex_program GL_EXT_texture_rectangle GL_ARB_fragment_program GL_EXT_stencil_two_side GL_ATI_separate_stencil GL_ARB_vertex_buffer_object GL_EXT_texture_lod_bias GL_ARB_occlusion_query GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_non_power_of_two GL_ARB_vertex_shader GL_NV_texgen_reflection GL_ARB_point_sprite GL_EXT_blend_equation_separate GL_ARB_depth_texture GL_ARB_texture_rectangle GL_ARB_draw_buffers GL_ARB_pixel_buffer_object GL_WIN_swap_hint GL_EXT_framebuffer_object GL_EXT_texture_sRGB GL_ARB_color_buffer_float GL_ARB_half_float_pixel GL_ARB_texture_float GL_NV_conditional_render GL_EXT_texture_swizzle
Fred: Just a second. No serial number is given in System Information.
Soumyadeep: I am sorry to inform you that the serial number will not be available in your system.
Soumyadeep: Fred, I have locate the serial number in your Adobe account.
Fred: Lightroom version: 4.1 [829322] Operating system: Windows 7 Business Edition Version: 6.1 [7601] Application architecture: x64 System architecture: x64 Physical processor count: 2 Processor speed: 2.1 GHz Built-in memory: 8123.8 MB Real memory available to Lightroom: 8123.8 MB Real memory used by Lightroom: 1687.3 MB (20.7%) Virtual memory used by Lightroom: 1657.0 MB Memory cache size: 1194.5 MB System DPI setting: 96 DPI Desktop composition enabled: Yes Displays: 1) 1360x768 Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.1 Library Path: C:\Users\FT\Pictures\Lightroom\Lightroom 4 Catalog.lrcat Settings Folder: C:\Users\FT\AppData\Roaming\Adobe\Lightroom Adapter #1: Vendor : 8086 Device : 2a42 Subsystem : 145110cf Revision : 7 Video Memory : 32 AudioDeviceIOBlockSize: 1024 AudioDeviceName: Speakers (2- USB Audio) AudioDeviceNumberOfChannels: 2 AudioDeviceSampleRate: 44100 Build: 6.0x552 Direct2DEnabled: false GL_ALPHA_BITS: 8 GL_BLUE_BITS: 8 GL_GREEN_BITS: 8 GL_MAX_3D_TEXTURE_SIZE: 128 GL_MAX_TEXTURE_SIZE: 4096 GL_MAX_TEXTURE_UNITS: 8 GL_MAX_VIEWPORT_DIMS: 4096,4096 GL_RED_BITS: 8 GL_RENDERER: Mobile Intel(R) 4 Series Express Chipset Family GL_SHADING_LANGUAGE_VERSION: 1.20 - Intel Build 8.15.10.1883 GL_VENDOR: Intel GL_VERSION: 2.1.0 - Build 8.15.10.1883 OGLEnabled: true OGLPresent: true GL_EXTENSIONS: GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_blend_color GL_EXT_abgr GL_EXT_texture3D GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array GL_SGIS_texture_edge_clamp GL_SGIS_generate_mipmap GL_EXT_draw_range_elements GL_SGIS_texture_lod GL_EXT_rescale_normal GL_EXT_packed_pixels GL_EXT_separate_specular_color GL_ARB_multitexture GL_EXT_texture_env_combine GL_EXT_bgra GL_EXT_blend_func_separate GL_EXT_secondary_color GL_EXT_fog_coord GL_EXT_texture_env_add GL_ARB_texture_cube_map GL_ARB_transpose_matrix GL_ARB_texture_env_add GL_IBM_texture_mirrored_repeat GL_EXT_multi_draw_arrays GL_NV_blend_square GL_ARB_texture_compression GL_3DFX_texture_compression_FXT1 GL_EXT_texture_filter_anisotropic GL_ARB_texture_border_clamp GL_ARB_point_parameters GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_env_crossbar GL_EXT_texture_compression_s3tc GL_ARB_shadow GL_ARB_window_pos GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_ARB_vertex_program GL_EXT_texture_rectangle GL_ARB_fragment_program GL_EXT_stencil_two_side GL_ATI_separate_stencil GL_ARB_vertex_buffer_object GL_EXT_texture_lod_bias GL_ARB_occlusion_query GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_non_power_of_two GL_ARB_vertex_shader GL_NV_texgen_reflection GL_ARB_point_sprite GL_EXT_blend_equation_separate GL_ARB_depth_texture GL_ARB_texture_rectangle GL_ARB_draw_buffers GL_ARB_pixel_buffer_object GL_WIN_swap_hint GL_EXT_framebuffer_object GL_EXT_texture_sRGB GL_ARB_color_buffer_float GL_ARB_half_float_pixel GL_ARB_texture_float GL_NV_conditional_render GL_EXT_texture_swizzle
Fred: OK, how can I easily get the bloody serial number for you?
Soumyadeep: Fred, I have locate the serial number in your Adobe account.
Soumyadeep: Once you login to the Adobe account, click on "My products" under the "My products and services".
Soumyadeep: There you can locate the serial number which you have registered.
Fred: OK, so you don't need it now. It isn't in a format that I can copy and paste.
Fred: 116040070815784336099081
Soumyadeep: Since it was registered in your Adobe account we can get the information from there.
Soumyadeep: Thank you for the serial number.
Soumyadeep: Fred, I would like to inform you that all the raw edit options you will get in Lightroom develop module.
Fred: I hope I copied it correctly it is presented so small.
Fred: OK, just a second.
Fred: So, I go to "Develop" it will open in Camera Raw 7.01?
Fred: Frankly, this is the reason that I have just been using Bridge is because of the seemingly lack of coherent connection between LightRoom 4 and PhotoShop CS6.
Soumyadeep: I would like to inform you that you will not have any separate camera raw plugins for Lightroom. Since Lightroom will not require a camera raw converter.
Fred: At least I can open into Camera Raw and make the necessary adjustments and it will load in to PhotoShop.
Fred: OK, then why when opening a "RAW" image out of LightRoom does it go directly to CS6 bypassing Camera Raw?
Fred: Not allowing all of the wonderful adjustment toos, particularly the new ones in Camera Raw. I just don't understand the disconnect.
Soumyadeep: Fred, may I know which product you are referring as "CS6"?
Fred: If I had wanted to process all my images in LightRoom I would not have wasted my money on CS6. Does that make sense?
Fred: PhotoShop CS6
Fred: Or PhotoShop 6 Extended
Soumyadeep: Thank you for the information.
Fred: The question still remains "Why does LightRoom 4 only recongize DNG files and not other RAW file formats and not allow them to be opened into Camera Raw?"
Fred: I don't want to process my images in LightRoom 4. I want to catalog and sort them. I want to process the RAW files from Canon in Camera Raw and then move on to PhotoShop 6 Extended.
Fred: So, what you are telling me is that I can't open a RAW file in LightRoom into Camera Raw. Simply stated.
Soumyadeep: Fred, I can understand your concern. Lightroom will not require a camera raw converter.
Soumyadeep: May I have the name of the camera model you are referring?
Fred: Two camera models: EOS 5D Mark II and EOS 60D
Soumyadeep: Please so that I can check further and try to troubleshoot your issue.
Soumyadeep: .Thank you for the information.
Fred: Both are listed as supported by Adobe PhotoShop and Camera Raw. I found that in my research.
Soumyadeep: Okay.
Soumyadeep: Please close all the Adobe applications.
Fred: I simply want to go from LightRoom 4 directly to Camera Raw 7.01 and then onto PhotoShop 6 Extended. Seems pretty straight forward and logical to me. Then again I'm not Adobe.
Fred: OK, just a moment and I'll do that.
Soumyadeep: Click on Start.
Soumyadeep: Fred, may I know what operating system you are using?
Fred: I am working on Windows 7 64 bit operating system.
Fred: I have closed all applications from Adobe.
Soumyadeep: Thank you for the information.
Soumyadeep: Click on Start.
Soumyadeep: Just type %Appdata% in the search box and hit the enter key.
Fred: Ok, Im pretty computer savy so just tell me where you want to go.
Soumyadeep: Double click on Adobe folder.
Fred: Done
Soumyadeep: In that folder you will have a folder CameraRaw. Please rename the folder as CameraRawold.
Fred: Done
Soumyadeep: In that folder you will have a folder Adobe Photoshop CS6. Please rename the folder as Adobe Photoshop CS6old
Soumyadeep: After renaming the images please close the page and try to open a raw file and let me know the exact result.
Fred: Done
Fred: Just a moment. I have renamed CameraRawold and Adobe6Old. i am going to navigate to my external drive and click on a RAW File
Soumyadeep: Okay.
Soumyadeep: Let me know the status.
Fred: It is opening PhotoShop 6 Extended.
Fred: I can change the properties of the file to open in another program if that is where we are going.
Fred: It also created an error that stated that it recognized graphic software that is not completely supported and PhotoShop is not opening normally.
Fred: Given a little more time it opened in Camera Raw.
Soumyadeep: Fred, once more step you need to perform as you got an error regarding graphic software.
Soumyadeep: Please try to work on the Camera Raw and let me know it is working fine or not.
Fred: And I lost my presets.
Fred: OK, where does this leave us?
Fred: With regards to LightRoom 4?
Soumyadeep: Fred, you wanted to open the raw images in Camera raw option instead of Photoshop CS6, right?
Fred: Camera Raw appears to be functiong fine.
Soumyadeep: Great!
Soumyadeep: Please close all the Adobe application.
Soumyadeep: Re launch Photoshop and type CNTRL+ K.
Soumyadeep: Let me know once you are done.
Fred: Checking the "CR2" files out of Canon the dafault to open is with PhotoShop 6
Fred: Ok, let me close all of them.
Fred: OK, closed sir.
Soumyadeep: Please navigate to Performance tab.
Fred: "Performance Tab" in what program?
Soumyadeep: Re launch Photoshop and type CNTRL+ K
Soumyadeep: A new window will pop up "Preference"
Fred: Just a second it is opening. Thanks for help.
Fred: I am now at the Prefernces box. Performance Tab
Soumyadeep: You are welcome.
Soumyadeep: Correct.
Fred: OK, I'm in Preferences
Soumyadeep: Please let me know Use Graphics Processor is checked or unchecked.
Fred: It is checked. I do know that on this machine that the graphics processor is not fully supported due to a lack of a separte video card.
Soumyadeep: Okay. Please do check once that the graphic drives are updated or not.
Soumyadeep: Fred, I hope now your are able to open the raw images in camera raw as you were referring?
Fred: Just a second. Driver software is up to date.
Fred: Let me open LightRoom 4 and see where it goes. Just a second.
Soumyadeep: Sure.
Fred: Lightroom is taking a long time to open now.
Fred: Now I'm getting the message that it is not responding.
Fred: OK, it finally opened. Just a second.
Soumyadeep: Okay.
Soumyadeep: Please let me know the result.
Fred: In light room when I select "Edit In PhotoShop 6" it is going directly to Photoshop 6 and not opening Camera Raw. Still.
Fred: So, my friend. We are still back to the original question and now I have to reload all of my preferences lost due to the change in AppData. LOL!
Fred: I guess I can organize all I ant in LightRoom and still use Bridge to edit and work on my images.
Fred: Sorry! Organize all I want and still edit out of Bridge.
Soumyadeep: Fred, I am sorry to inform you that when you will open the images from Lightroom it will not require the camera raw and also when you will try to open the images in other software from Lightroom it will directly open in that software. Since Lightroom itself works as a Came

Jim, thank you for an excellent responce. I truthfully had researched the "Help" section on LightRoom and PhotoShop and found nothing that even remotely resembled your straight forward and easy to follow directions. After upgrading to CS6 and LightRoom 4 I am delighted with all of the new features that Adobe created in PhotoShop. I'm not sure that LightRoom 4 was as great an advancement as PhotoShop itself.
I am certainly going to give your solution a try and see how it works out for me. I concur that I probably do not fully understand and appreciate the relationship between the two programs. Today was my attempt of gaining a better insight to that relationship. Thank you for your response!

Problem with Photoshop CS6. If I open a file using Camera RAW

I have a new problem with Photoshop CS6. If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to. I don't know if I changed something by accident or not.
Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..." The save as window opens showing the file name and format. The default format seems to be .PSD. I use the drop down to select .jpg. The file saves normally as a .jpg. When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite but it always used to do that. This adds a few extra steps when closing a document and it really slows me down.
In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
Any ideas?
Thanks in advance

You are in the wrong forum; You actually need Photoshop forum at this link:
<http://forums.adobe.com/community/photoshop?view=discussions>
Hope you can repost your question at the correct link.

How do I install camera raw 4.6 (for Nikon D90) in Elements 6 for a Mac?

I need to install camera raw 4.6 (for Nikon D90) plug-in on Elements 6 for at Mac? I'ved downloaded the plug-in but it does not seem to work. I've got Elements 10 on my desktop Mac but I am using Elements 6 on an older iBook G4. Any help will be appreciated. thanks.

For PSE 6, get the .plugin out of the download, then go to your hard drive>library>Application Support>Adobe>plug-ins>file formats and remove the old plug-in, then put just the new .plugin file in there instead. Older versions of PSE can't update ACR from the help menu the way PSE 10 can.

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

Bridge will not now let me use camera raw, though I had been using it every day. It says that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Bridge will not now let me use camera raw, though I have been using it every day. It ways that "the parent application is not active. Bridge requires that a qualifiying product has been launched at least once to enable this feature." What am I to do?

Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
How To Get Help Quickly

Should I use Camera Raw 5.0 for JPEG photo editing?

Similar Messages

Maybe you are looking for