Should i use display port or dvi?

I've just purchased a NEC 232WMI display.  This is a 23" display with 1980 by 1020 resolutions, and has displayport, DVI and VGA inputs, as well as USB and audio.  It supports Displayport v1.1a.
I've got a 2006 MacBook with mini-DVI output, and a mid 2009 MacBook pro with mini-displayport out.
The display came with a DVI cable.  I've ordered a mini-DVI to DVI adapter for my macbook - the question is do I order a mini-Displayport to Displayport cable (or do I need an adapter and cable), or do I order a mini-displayport to DVI adapter to connect the MacBook Pro?
Will there be any difference in image quality / use of other cables etc?
Any suggestions as to what to do and why would be appreciated!

Diffferences are not remarkable but DVI is indeed better. I wuold then choose DVI.

Similar Messages

  • Mini display port to dvi or vga adaptor?

    I currently use a MacBook Pro and want to use the mini display port to my 24 inch Samsung LCD screen. My question is should I use the mini display port to DVI or VGA? My Monitor has both ports on back. I know that DVI is Digital and suppose to be the superior source compared to VGA analog, but I have only used VGA when using my Monitor with my old PC and it seemed fine enough for me.
    If, I do go the DVI digital route will it be that much better graphics compared to just using VGA?
    Finally, has anyone hooked up a mini display port to either DVI or VGA adaptor into an LCD monitor? What are your thoughts, concerns, advice etc. I realize its a very easy thing to do, but seem tied up between using DVI or VGA port.
    Thanks,
    DH

    Diffferences are not remarkable but DVI is indeed better. I wuold then choose DVI.

  • Display Port to DVI, 22inch Neovo, no signal

    So I bought a new Alu Macbook last week including the according Display Port to DVI adaptor, arrive home, plug in the adaptor, connect the screen (Neovo E-W22) > NO SIGNAL.
    I see my laptop screen "flash" for a sec like it always does when it detects a secondary display but nothing is being transmitted to my external display (which is perfectly working with my previous macbook and DVI adaptor). Today I went back to my mac retailer, use my macbook and the adaptor to connect it to an apple display, and ..MAGIC.. it works perfectly.
    I'm guessing there's something wrong with the new DVI drivers and we need a new firmware update but atm I'm just basically "screwed", there's no way for me to use my external monitor with my new system as I'm not planning on buying a second Display Port adaptor (to VGA) as it should just work.
    This isn't really a question, just a remark for other people who might have the exact same problem.
    Kevin

    I had similar problem when connecting my extrernal display. For me, it's was as simple as changing the channel option of the airport express from automatic to a manual selection...in my case "6." I've seen a couple posts on this now and some switch from 11 to 6, or vice versa. Mine was set up for automatic selection, so I first manually selected 11. That didn't help, but selecting 6 fixed things immediately. Here's the thread that helped me: http://discussions.apple.com/message.jspa?messageID=11051427
    and since I found it's not that easy if you don't know how, here are directions for changing the channel on your airport express:
    http://forums.macrumors.com/showthread.php?t=379142

  • I have a MacBook 5.1 and want to play movies from my computer onto my TV. I have a mini display port to DVI adapter but when I connect it to my TV nothing happens. What do I need to do?

    Hi,
    I have just connected my MacBook to my TV with a mini Display port to DVI Adapter which was connected ta HDMI to DVI Video Cable which I connected to my TV. I turned my TV on and my TV could not find any signal. I used the TV menu to connect to HDMI , but it said there was no signal. What do I do now?

    try turning on the mirroring option and see if anything changes the following link will show you how to enable mirroring display setting
    http://www.ehow.com/how_5661153_set-display-macbook-mirror.html

  • Would like to use both ports adc dvi for hdmi for maca1047

    I have a Mac A1047 dual 2.0 and would like to use both ports, adc/dvi to hdmi is the an adapter for both? I am in Michigan is there a store here does apple store carry anything like this and do I have to go online?

    Hello, it may be tough finding an ADC->DVI adapter, & not certain ADC->DVI->HDMI 2 adapters will work.
    I'm reasonably certain Apple no longer carries anything for ADC.
    http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=27382 87&SRCCODE=WEBGOOPA&cm_mmc_o=mH4CjC7BBTkwCjCV1-CjCE&gclid=CK_q5ZuChbkCFSU6QgodOk cAIQ
    http://www.bestbuy.com/site/Rocketfish%26%23153%3B---DVI-to-HDMI-Adapter/9205745 .p?id=1218058779564&skuId=9205745
    Or a DVI->HDMI cable, besides the ADC->DVI adapter...
    http://dvi-to-hdmi-review.toptenreviews.com/index.html

  • Mini display port to DVI not working

    The mini display port of my late 2009 27" iMac is not working with DVI.  Using the same monitor, DVI cable, and mini display to DVI adapter, I can connect my Air with no problems.  So the monitor, adapter, and cable are fine.  I can also connect my iMac to the same monitor using a VGA cable and a mini display to VGA adapter.  So the problem clearly seems to be with my iMac.  Has anyone had similar problems?  Any advice?  I think the image quality of DVI is substantially better than VGA so I really would like to get this working.  But I don't think the difference is worth carrying my 27" monster into the Apple Store. I could buy a mini display to HDMI adapter, but I would rather not buy yet another adapter (I think I have about 15 already with my various idevices) - and it might not work either. The DVI setup is simple and really should be working.  I bought a monitor and also a HD TV with DVI ports specifically for this.  Thanks.

    Hello,
    Using the VGA connector, what resolution is set on the Monitor?
    Is there any input choices on the Monitor for port or source?

  • Should I use a VGA or DVI connector?

    I have recently bought a Samsung 22" LCD SyncMaster 2232BW to add as a second display to my macbook.
    I have the choice to hook it up through the VGA or DVI connector. At present im using the apple mini DVI to VGA connector and the quality looks good. I was wondering if I were to swap it over to DVI whether or not I would see an marked improvement.
    I would like to know the pro's and cons of both VGA and DVI and whether it's worth swapping my apple VGA connector for the apple mini DVI to DVI and using the DVI cables also supplied with the monitor.
    Thanks for any advice you might be able to offer.
    Message was edited by: Monkeypuzzle

    That's why I love this Discussion Forum: most of the time this first time and somewhat always slightly intimidated Mac owner can get any question I have about my Mac answered.
    I just replaced my 19 inch dead lcd with a 22-inch Westinghouse L2210NW. ok, not the most recognizable name in the industry, but specs are good, and price at Best Buy ($229.), I couldn't resist. Bought an additional 3 yr service policy(29.99) figure I'm covered for 4 years-much better than the 14 month old 1 year warranty monitor I just replaced.
    wow. Out the box, couldn't be more wow'd. Colors are brilliant, size is huge! This monitor does have DVI>VGA and
    I am using the Mac DVI ->VGA adapter/connector. A few reviews I have read about this monitor stated changing to DVI even more impressionable-I can't hardly imagine. SO: Please advise or confirm: I need only replace the cable/vga came with the monitor: out the box it readily plugs into the white adapter at the back of my Mac Mini. So my new DVI cable should plug directly into my Mac, not needing the converter? Can you give me a ball-park figure on what this new cable should cost. And finally, it is worth it?
    thanks for any input, and as always, your time!
    Sandy

  • Mini display port to DVI problems

    Hello community,
    I have a question regarding the connection from an iMac via the mini display port to a DVI input at a TFT monitor. I have an older TFT monitor and now I connected the iMac with this monitor via mini display port -> DVI adapter -> DVI cable -> monitor.
    It is quite a simple connection, but actually when I force Mac OSX to detect external monitors it does not react at all. Mac OSX behaves as if there is no connection to an external monitor.
    I already told this to my reseller and they told me that the adapter is not working correctly and they gave me another one. With that one I have exactly the same problem and now I'm quite sure, that it is not a problem of the adapter, but somehow my iMac does not find the external monitor.
    Is there probably an underlying problem I do not understand yet?
    By the way, my very old Macbook White has no problems detecting the monitor. If I use the older video output it works fine, but the new output at my iMac 21,5 inch does not work with my monitor.
    My question is, why does it not work and what kind of monitor do I need, that it can be connected with my iMac (via DVI)?

    Is the adapter plugged in all the way in the Mini DisplayPort?  It takes more force than you might expect.

  • Mini Display Port to DVI Adapter

    Hi guys,
    I bought a MiniDisplayPort to DVI adapter @ Amazon to connect my Macbook (bought in 2009) with my Samsung 27" display. here's the link for the adapter:
    http://www.amazon.de/HDGear-DisplayPort-Adapter-Stecker-Buchse/dp/B002CBMZSA/ref =sr_1_3?ie=UTF8&qid=1320868644&sr=8-3
    and the link to the display: http://www.amazon.de/Samsung-SyncMaster-P2770HD-Reaktionszeit-TV-Tuner/dp/B002PW DEX6/ref=sr_1_1?ie=UTF8&qid=1320869130&sr=8-1
    (The display works on my windows computer without any problems with FULL HD. So that means with 1920 x 1080. I've connected the pc with the display via a DVI cable too.)
    But actually the problem is that when I connect my macbook with the dispay I can't choose full HD. I can only choose a lower rate. So my display has on the left and on the right side always a black bar! The screen is than more or less pixelated!
    Do you think i would have the same problem with a original Apple adapter?
    And no, I can't use a HDMI adapter
    Guys please help me

    Welcome to the Discussions!
    Apparently, you bought the mini-DVI to DVI adapter, which was for the previous generation of MacBook and MacBook Pro computers. Return it and get the correct one.
    bd

  • Tecra R850-117: Need info about Display Port to DVI adapter

    I want to connect my laptop to a DVI screen and it only has a DisplayPort (and VGA but I do want to get the full resolution) port.
    So I need an adapter.
    Can I use a passive adapter or do I need to buy an active?

    Hi
    As far as I know the DisplayPort on the left side complies to the V1.1a standard.
    This means that the DispplayPort is compatible with DVI and HDMI standards so you can use an DisplayPort to DVI or HDMI adapter.
    So you could use something like that:
    <img src='http://img6.imageshack.us/img6/3189/captureuqp.jpg' border='0' width='300' height='200px'/>
    Greetings

  • Is anyone else experiencing problems with the thunderbolt port on their Mac Mini's regarding using it to connect a second monitor? I've got the Mini Display Port to DVI-D adapter along with a DVI-D cable and I can't get an image on the second monitor.

    I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.

    As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
    You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong.

  • Mini Display Port to DVI Resolution Not Working Properly Again

    hink another EFI Update is in Order, Just used the Mini DisplayPort to DVI Adaptor to a NEC 3090WQxi Monitor and the Max Resolution is only 1600X1200, while my older (Late 2007) Macbook Pro needed an EFI/SMC update for Graphics before it detected the available resoltions for the same Monitor. Apple Support please fix this issue, or direct me in solving a very frustrating Problem
    For anyone at Apple to Fix this annoying problem here are the Details.
    Model Name: MacBook Pro
    Model Identifier: MacBookPro5,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.8 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 6 MB
    Memory: 4 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: MBP51.0073.B02
    SMC Version: 1.33f6
    Cheers,
    Message was edited by: winxp
    Message was edited by: winxp
    Message was edited by: winxp
    Message was edited by: winxp
    Message was edited by: winxp

    Hi DjTimmyM,
    Thanks for visiting Apple Support Communities.
    Start with the steps below to troubleshoot issues with video out from your MacBook Pro:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Best Regards,
    Jeremy

  • I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

    I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all?  I read where on a PC they would work together, but on a MAC they do not.
    I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
    When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one.  I did not think there could be a difference.
    Mainly want to use it for CS6 and LR4.
    How to proceed??? 
    I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI.  Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
    Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
    As a last resort I could sell both and get a 5870.  That would work, I'm sure of that, it's just that I wanted the better graphics card.
    Thanks,
    Bill

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • Mini Display port DVI adapter not working on Thunderbolt Port

    For some time I've been using a mini display port to DVI adapter on an slightly older MBP to connect to my HD TV.  I recently purchased a MBP with a Thunderbolt port and when I try to connect it to my TV via my mini-display-port-DVI adapter things are not working properly.  The MBP is seeing the Philips TV but it isn't listing all the display modes and I'm not able to send any video to it.  Does the Thunderbolt port require a new display port to DVI adapter?

    Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other.  I've got both laptops so I can compare side by side.  I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop.  This is very disappointing as I expect things to just work with Apple products.

  • Can a mini DVI Display port work with a DVI to HDMI Cable?

    I just  bought  a Mini Display Port to DVI Adapter Along with DVI to HDMI Cable for my Mac. I plugged the adapter Into my Imac then I plugged DVI end of the other cable into the adapter when Plugged HDMI connection into my HD TV nothing happened.

    I'll second that, you need the > Mini DP to HDMI Adapter - Apple Store (U.S.) and a good HDMI cable.

Maybe you are looking for