Should I use HPSA application to install recommended HP updates, windows updates and tune-ups?

Should I use HPSA application to install recommended HP updates, windows updates and tune-ups? I understand you can select the updates that you want to install but I always select and install the recommended updates through HPSA.
Thanks.
This question was solved.
View Solution.

Yes you can except for BIOS update. Rest if you like, you could confirm if the version and date of the driver notified is that which is given in your HP support page.
You can follow the suggestions given in your other thread: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-Support-Assistant-gt-HP-Upda...
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

Should I use Adobe Application Manager or the CC updater?

Should I use Adobe Application Manager or the CC updater. I have both and sometimes one does the update and another time the other. I would prefer to have one that organises and takes care of the updates.

Hi Daniel,
Please refer the article: http://helpx.adobe.com/creative-cloud/help/install-cc-desktop-app.html.
Regards,
Romit Sinha

How long does it take to delete an account from a macbook? I used secure delete (at the recommendation of the apple genius) and it has already taken 2 weeks... and still not deleted! Granted there was over 200GB of data... any ideas on this? thanks

how long does it take to delete an account from a macbook (OSX 10.9.4)? I used secure delete (at the recommendation of the apple genius) and it has already taken 2 weeks... and still not deleted! Granted there was over 200GB of data... any ideas on this? thanks

how long does it take to delete an account from a macbook (OSX 10.9.4)? I used secure delete (at the recommendation of the apple genius) and it has already taken 2 weeks... and still not deleted! Granted there was over 200GB of data... any ideas on this? thanks

I have installed LR 6 for windows (win7) and LR will not start but hangs up

I have installed LR 6 for windows (win7) and LR will not start but hangs up. I have uninstalled the software and re-installed it, Tried to open it as Administrator and it still hangs up with the Adobe banner (the picture) being displayed. Nothing happens. When I click on anything I get the message that Lightroom is not responding. I have asked to have a new catalog created for Lightroom 6............Please help.
Thank you. Leo

hbereth,,
It is Ideal to install Creative Cloud app , if you are using Adobe apps.
Creative Cloud is nothing but an updated version of Adobe Application manager. Adobe Application Manager is required for different purposes like Activation, Update.process and installation processes.etc
Adobe application manager must be up to date , that brings to Creative Cloud application which is the updated version .
No need to Sign in and all , just keep it install, if you are not okay with installing Creative Cloud app. it's okay , you can still have Adobe Application Manager only.

HT1926 iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Whenever I launch the Mail application on my iPod Touch, the window opens and closes immediately. What can I do?

Whenever I try to launch the Mail application on my iPod touch, the window opens and closes immediately. I just restarted the device, but there's an icon on the screen of a circle.

Try a hard reset and go from there.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

Archive and install: Should I use original or recently installed Leopard?

My daughter is in China and her MacBook Pro powered off during a restart after installing program updates. She needs to archive and install and I need to ship her the correct disk for it. Genius Bar said to use original disk that came with her computer, but she recently upgraded to Leopard (which I didn't think to mention to them). Which should she use for doing the archive and install? Should I send her both, just in case?
Thanks for any advice.

srobs:
Welcome to Apple Discussions.
If she is running currently running Leopard she should use the Leopard install disk else she would be back to Tiger and would have to Archive and Install again to get to Leopard. Because things can go wrong during this or any major procedure she should backup/clone prior to the Archive and Install.
cornelius
Message was edited by: cornelius

Which C# Adobe library should I use to open a PDF in Acrobat Reader 9, 10, and 11?

Hi, all.
I have a Visual Studio C# application that writes an Adobe PDF using iText. Does anyone know how to programmatically open the PDF on client's computer and ensure it works for Adobe Reader 9, 10, and 11?
-I have Adobe Reader XI on my machine and "Adobe Pdf Reader" is NOT showing up in my COM references. This is the library that I've heard people use for this.
-The "Adobe Reader File Preview Type Library" is showing up there, but does not add to my project because of the following error message: "A reference to 'Adobe Reader File Preview Type Library' could not be added. Could not register the ActiveX type library....adoberfp.dll'." But I haven't persued this further becuase I'm not even convinced I should be using this library, which brings me to my next point:
-Please don't tell me to go read the Adobe SDK spec. In searching for this answer, I found posts on here with people asking this question and getting not great answers, or half-*** answers to go read the Adobe SDK spec. I have the Adobe SDK spec, it's terrible. The example source code is laughably poor and reads like it was written by someone with bad english, with poor naming, commenting, and documentation, and there is no separate document that explains what the source code does. I think the reason people say this is because they haven't read it themselves and they don't know the answer and hope to deal with the question by handwaving. Sorry for the rant if you weren't going to do that!
Thanks in advance, if anyone knows.
-Brandon

It will be from a client-side application, and I will be reviewing this further and get back on it. At this time my assembly isn't the correct type of 32-bit, which may be a deal-breaker. But downgrading it to 32-bit, I wasn't able to find or include the appropriate library for AXAcroPDF.
Just a word about my trying to read the SDK documentation. The documentation folder has 5 items, a folder called "Javascript", an html file caled "Acrobat_11_SDK_Help_Shortcut.html", a zip file called "...HTMLHelp.zip," pdf_reference.pdf, and U3DElements.pdf. I've never heard of U3DElements, so surely that isn't meant for me. The pdf_reference.pdf, when opened, has three PDF links to two supplements to ISO 32000-1 and a document titled Document management. These describe the PDF spec, so that's not for me. So I must have to use the HTML documentation shortcut. I open it, and my browser says the redirect URL can't be found. Ah, may be that stuff in the ZIP file it's referencing. After unzipping it, you have to move the file around so that it actually references the right index.html inside the unzipped folders, and then even after this it loads up as two blank frames in my browser. I will look into why the links are all dead, but holy lord, this is just not very helpful at all.
Thanks for your help, Test Screen Name.

Can you use an application in hyper-v environment in Windows server from each client computer or that is not possible?

hi,
I like to know besides running 2 or more operating systems,like exchange or SQL ect .
what other benefits it has for example when you install 2-3 applications in t hyper_v environment can you use those applications from each client computer or that is not possible at all. ( I don't mean cloud )
thanks
johan
h.david

thanks,
so , now what is the benefit of hyper-v role on essential 2012r2 . it that means that I can install only one operating system on it only one instance and no more. also I can run some applications on this server just like you say with RDP licence
for each user to acces this virtual server!
and if I want more instances then I have to get datacenter.
johan
h.david

Installing XE Client en Windows 7 and using OLEDB

Hello,
I'm trying to use XECLient with OLEDB on Win 7 but when installing XE client on Windows 7, the "Oracle Provider for OLE DB" doesn't appear in the Providers List (ex : in a udl file).
I've tried to do this "regsvr32 OraOLEDB10.dll" and this is ok (dll registered successfully). But still no Oracle Provider !
I need help please !
Thanks.

Hi there !
I have the same problem On Windows 7 Professional 32bits (on several PC).
After installing XEClient as an Administrator.
I can't connect to my server with OLEDB (MS Access 2010).
I have error message "provider not found" or sometimes it will just crash without going to VBA error handler !
If I "regsvr32 OraOLEDB10.dll" sometimes it works an sometimes it does not.
But anyway it won't help for the connexion.
Sometimes launching sqlplus will crashes also ! But will work if I launch it as a Administrator.
There is a workaround : installing OracleXE (the database) on the same machine will resolve the problem..
Then we can just stop the unused Oracle services with MSConfig.
When I install OracleXE.exe I see that my user get the ORA_DBA groupe...
If someone can help finding a better solution...
Thx all !

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

Install fms 4 in Windows 7 and access from a webserver in different domain

Hi,
I have installed fms 4 in windows 7 in my computer, but i cant get it work with a flex application that i have in a server.
I added the port in my router's settings
2
fms
all(udp/tcp)
19350
65535
xxx.xxx.xxx.xxx
19350
65535
3
fms
all(udp/tcp)
1935
1935
xxx.xxx.xxx.xxx
1935
1935
hope someone can help me.
thanks,
Javier

thanks for the response Jay,
i havent done that, what settings is needed to change?
this is my fms.ini
# fms.ini contains substitution variables for Flash Media Server          #
# configuration files. Lines beginning with '#' are considered comments. #
# A substitution variable is in the form <name>=<value>. Everything up to #
# the first '=' is considered the name of the substitution variable, and #
# everything after the first '=' is considered the substitution value. If #
# you want a substitution variable to have leading or trailing spaces,    #
# enclose the value around double quotes. For example, foo=" bar "        #
# This section contains configurable parameters in Server.xml #
# Username for server admin
# For example:
#    SERVER.ADMIN_USERNAME = foo
SERVER.ADMIN_USERNAME = foo
# Password for server admin
# For example:
#    SERVER.ADMIN_PASSWORD = bar
SERVER.ADMIN_PASSWORD = bar
# IP address and port Flash Media Admin Server should listen on
# For example:
#    SERVER.ADMINSERVER_HOSTPORT = :1111
SERVER.ADMINSERVER_HOSTPORT = :1111
# User id in which to run the process (Linux Only)
# For example:
#    SERVER.PROCESS_UID = 500
SERVER.PROCESS_UID =
# Group id in which to run the process (Linux Only)
# For example:
#    SERVER.PROCESS_GID = 500
SERVER.PROCESS_GID =
# License key for Flash Media Server
# For example:
#    SERVER.LICENSEINFO = FMD200-XXXXX-XXXXX-XXXXX
SERVER.LICENSEINFO =
# LIVE_DIR denotes the full path of sample "Live" application's
# folder for storing any live stream recorded by server.
# For example:
#    LIVE_DIR = <FMS_Installation_Dir>\applications\live
LIVE_DIR = C:\Program Files\Adobe\Flash Media Server 4\applications\live
# VOD_COMMON_DIR denotes the full path of sample "VOD" application's
# folder for storing onDemand and Progressive Download .flv/.mp3 files.
# File stored in this folder can be streamed and are also PD-able.
# Note : If you are using the default installation of Apache as a webserver,
# and if you modify VOD_COMMON_DIR, please change the document root
# accordingly in httpd.conf.
# For example:
#    VOD_COMMON_DIR = <FMS_Installation_Dir>\webroot\vod
VOD_COMMON_DIR = C:\Program Files\Adobe\Flash Media Server 4\webroot\vod
# VOD_DIR denotes the full path of sample "VOD" application's
# folder for storing onDemand only .flv/.mp3 files. Files stored in
# this folder are not PD-able
# For example:
#    VOD_DIR = <FMS_Installation_Dir>\applications\vod\media
VOD_DIR = C:\Program Files\Adobe\Flash Media Server 4\applications\vod\media
# The maximum size of the FLV cache, in megabytes.
# The default is 500MB.
SERVER.FLVCACHE_MAXSIZE=500
# Whether to start and stop the included HTTP server along
# with FMS.
SERVER.HTTPD_ENABLED = false
# This section contains configurable parameters in Adaptor.xml #
# IP address and port(s) Flash Media Server should listen on
# For example:
#    ADAPTOR.HOSTPORT = :1935,80
ADAPTOR.HOSTPORT = :1935,8000
# IP (address and) port that Flash Media Server should proxy
# unknown HTTP requests to. Leave empty to disable proxying.
# With no address, specifies a localhost port.
# For example:
#    HTTPPROXY.HOST = webfarm.example.com:80
HTTPPROXY.HOST = :8134
# This section contains configurable parameters in Vhost.xml #
# Application directory for the virtual host
# For example:
#    VHOST.APPSDIR = C:\myapps
VHOST.APPSDIR = C:\Program Files\Adobe\Flash Media Server 4\applications
# This section contains configurable parameters in Application.xml #
# List of semi-colon delimited paths in which to search for script to load
# For example:
#    APP.JS_SCRIPTLIBPATH = C:\scripts;C:\Program Files\Foo\scripts
APP.JS_SCRIPTLIBPATH = C:\Program Files\Adobe\Flash Media Server 4\scriptlib
# This section contains configurable parameters in Logger.xml #
LOGGER.LOGDIR =
# This section contains configurable parameters in Users.xml #
# Enable or disable using HTTP requests to execute admin commands.
# Set to "true" to enable, otherwise it will be disabled. The
# actual commands permitted for server admin and virtual host admin
# users can be set in Users.xml.
USERS.HTTPCOMMAND_ALLOW = true
thanks,
Javier

I have 2 airport express base stations that I am trying to use to extend my wifi. I have windows 7 and downloaded the airport utility but it wont pick up my airport express. Does anyone know what im doing wrong and how to get them to work?

I have 2 Airport Base stations that I am trying to use to extend my WiFi but I cant get them to work. I downloade Airport Utility to windows 7 and it doesnt recognize any devices. I have them plugged in and they have a solid yellow light. Does anyone know what I need to do to get them to work. Your help would be appreciated.

Thanks for providing the model information.
I would recommend that you start by performing a "factory default" reset on all of your AirPort base stations. Once completed power them all down. While powered-down, temporarily connect both Express base stations to an open LAN port on the Extreme using separate Ethernet cables.
Once connected, power up the Extreme; wait five minutes, and then, power up each of the Express base stations. Which you power-up first doesn't matter.
Now start up the AirPort Utility on the PC. It should now "see" all three base stations. If so, go ahead and configure your extended network.
Please post back your results.

Have firefox 5 install on both my Windows PC and Android(beta5). But I can't find on either device where to enter the three sets of number to sync them. All I can do is get a set of number.

Installed Firefox 5 on Windows PC. Installed beta5 of Android device. I am trying to sync the two, but all I can do on either device and get the three sets of character to enter on the other device. I can't seem to find the option in either one the enter the number.

The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
Now- "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
Message was edited by: Apple I0S Help Team

Best practice - which server OS should I use for Exchange 2010 install

We currently have 2 exchange 2007 boxes running Server 2003. the plan is to upgrade to exchange 2010 (I'd prefer 2013 but the powers that be want 2010), and I have been asked to follow Microsoft best practice. The problem is I can't find anything to point
me in the direction of the recommended server OS, I can find ones it will work on but nothing to say Microsoft recommend this...
We have licenses for Server 2008, 2008 R2 and 2012 available, which one should I advise is the Microsoft recommendation?

Thanks Andy,
So is there no actual best practice recommendation for a server OS to run Exchange 2010 on? I agree that 2012 would be the one to go for, but the people making the decision on how we do this want reasons, and as they don't really have a lot of technical
understanding I need to be able to go to them with "Use Server 20xx because it's Microsoft best practice".
If there isn't a best practice recommendation I will try the longer support life and more options for high availability with 2012.
Well, you probably wont find a "best practice" as much as a "its supported" stance from Micorosoft.
As in all these things, there may be other reasons a business chooses to use 2008 over 2012 etc...
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Should I use HPSA application to install recommended HP updates, windows updates and tune-ups?

Similar Messages

Maybe you are looking for