Should I use nVidia or MSI Drivers for my new MSI VGA card?
Hi,
Im just about to replace my old (non-MSI) Geforce 4600 TI, with a MSI FX 5700, and i'd like to know, should I use the MSI drivers on the MSI CD, or should I just use the latest nVidia driver from the nVidia web site?
thanks for any help
Yes,but the drivers 6X.XX are optimized to the Geforce 6 series.I don´t think I will gain any increase in perfomance if I use the 61.77 driver,for example,instead of the 56.63.And MSI drivers allow DOT,which is safer way of overclocking
Similar Messages
-
The Registry Settings Used by the itunes drivers for importing and Burning CD's are missing
I get the following error message in the latest version of iTunes on start-up
The Registry Settings used by the iTunes drivers for importing and Burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I tried troubleshooting from a guide on another apple support page and it worked but stopped the DVD Drive working and I have tried reinstalling iTunes but that failed and I don't know what to do and how to get rid of this error on start-up of iTunesFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.
Boot Camp support:
http://www.apple.com/support/bootcamp/
Boot Camp FAQ:
http://support.apple.com/kb/HT5639?viewlocale=en_US -
When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes twice and still get the message.
Any clues??
Thank you.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Should I Use Boot Camp or Parallels for use of a Windows Desktop?
I am migrating from a PC to a Mac; I want to take advantage of having a Windows desktop to run some apps until i buy Mac equivalent software;
I have Tiger, but am installing Leopard this weekend;
Should I Use Boot Camp or Parallels for use of a Windows Desktop?
I am tempted by not having to reboot, but i don't want my mac to slow down?
I am a photographer and use Photoshop and other graphics intensive programs.Hi,
to achieve full computing power while in Windows you have to use BootCamp and for Photoshop and other apps of that caliber in Windows its the best.
For apps less demanding using Parallels (VMWare Fusion) is sufficient enough and the slight downgrade in speed is negligible.
You should however (if not already done) max out the RAM of your Mac.
Regards
Stefan -
When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie
Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems? -
I can't open the iTunes store and keep getting this error message. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing. Reinstall iTunes." I've reinstalled iT a half dozen times with no results.
You might have two different things going on at once here.
Starting with the registry settings message.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Error message ...Register setting used by I Tunes drivers for importing & burning CD or DVD are missing. Please re install I Tunes.
I re installed twice and error message is still there. Try to burn CD and message says: Disc recording not found.
WIN 7 I Tunes 11.0.1.2
Spoke to Dell support for 2 hours. Reinstalled updated drivers for CD DVD drive but same results.
Thanks
HWI'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Why should I use BO BI 4.0 for my existing SAP NetWeaver ?
Dear Sirs,
Question about BusinessObjects BI 4.0 & SAP Netweaver 7.0.
In my company we use NetWeaver for a year. We have some reports on portal, so we have some analysis via www. It seemed to me that this is enough for us.
Now on the market is available new version of BusinessObjects - version 4.0.
My question is :
Why should I use BO BI 4.0 for my SAP BW?
What will I gain by implementing BO BI 4.0 in conjunction with SAP BW?
Can I use existing reports on the new platform?
Can you give some links to documents, presentations and notes to answer these questions?
Best regards,
EmmoHi Emmo2000,
Please see my answers below:
Why should I use BO BI 4.0 for my SAP BW?
What will I gain by implementing BO BI 4.0 in conjunction with SAP BW?
Please see this SDN article which covers a lot of the new features of BI4.0 :
/people/ingo.hilgefort/blog/2011/03/24/sap-integration-update-9--should-you-start-with-sap-businessobjects-40-or-wait-for-41
Can I use existing reports on the new platform?
There is the ability to integrate BexWeb applications via our BI Launchpad. I'm not sure if this is what you are referring to but the following should clarify:
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtointegrateBExWebApplicationsintoBI4.x
Can you give some links to documents, presentations and notes to answer these questions?
For detailed information on the BI4.0 suite, I would direct you towards our product documentation:
http://help.sap.com/businessobject/product_guides/
I hope this is helpful and fully answers your question.
Kind regards,
John -
Each time I launch iTunes (latest version) on Windows 7 (w/ latest system updates) I receive the following error msg:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
When I click on "OK" iTunes completes the launch process and the application functions properly. This error msg appears without fail every time I launch the app.
I have reinstalled iTunes four times and continue to receive this message. iTunes is set in the system Control Panel as the default program for all functions that iTunes uses. I never burn CDs or DVDs and have never attempted to do so on this machine. I have had iTunes on this computer since I bought it last November and never had a problem with it until 2 months ago when this message began popping up. I did not notice any action I took that caused this, in terms of creating conflicts.
I hope someone can assist me in finding a way to stop this annoying error! Thanks!
DavidI'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for a maintenance reinstall. I presume I'd have to download Yosemite again, though I'd be happy just using Snow Leopard again too.
Thanks for the help.When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
The registry settings used by the iTunes drivers for importing and burning.
Please Help! Problem Burning CD's with iTunes 8!?
I downloaded iTunes 8 a few days ago. I think something went wrong, and it was taking a long time, so I canceled it, but it was nearly finished. When I opened iTunes, everything was fine, and all the new stuff (Genius and whatever else) was there, but this message came up:
Warning! The registry settings used by the iTunes drivers for importing and burning CD's and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
So, I went to the Apple website and clicked "download iTunes 8", and a box came up that asked me if I wanted to repair iTunes, or do something else. Obviously it knew I had already downloaded it, so I clicked "Repair". It ran, and it said everything worked. Then I clicked on iTunes, hoping the burning would work. The same message came up as before. When I tried to burn a CD, a similar message came up. WHAT DO I DO? Thank you.Here is the solution!
Go to this website: http://www.gearsoftware.com/support/drivers.php
Download the proper driver and install.
I am running Vista. I had two, actually three problems. First was that for some reason, my CD/DVD drive disappeared. I found that the solution to this was to delete the LowerFilters and UpperFilters strings in the registry. That worked and I got my CD drive back. However, I then got that pesky error message from iTunes. That was the second problem. The third problem was that I could no longer burn CD's of my playlists from iTunes and it said that the "disc burner or software was missing." Going online, I discovered that I was not the only one experiencing these three problems.
I happened to find the solution about the Gear drivers at http://www.pcdoctor-guide.com/wordpress/?p=2726. Installing the x32_x64 driver, of course, worked for me since I'm running a PC laptop. This took care of all three problems for me.
If you notice, the other post about editing the registry makes reference to the Gear ASPI driver. Gear is the one (as you would read on the first link) that provides the drivers for software to burn CD's. -
The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing
Error on Itunes start-up. Must click OK before Itunes will start.
The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I have reinstalled iTunes using their complete uninstall instructions.
iTunes does seem to work after OK is clicked, I'm just tired of having to hit OK.
Other thoughts... This started after the iTunes update required to go to IOS 6 for my devices. I'm able to sync my devices. It is possible that ZoneAlarm (my Antivirus and Firewall) got in the way at install. It flagged something and I denied it. I was doing multiple things at the time and the flag did not have any indication about iTunes. I have tried shutting down ZoneAlarm for the install and that has not helped either.
Will try another full uninstall that includes uninstalling ZoneAlarm...I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
Maybe you are looking for
-
I am trying to download the update IOS 5 version for mi ipad 2 and at the end when it finishes downloading it shows an error "connection has been interrupted and that the task could not be completed", my internet service is fine, what can it be?
-
View Mapping Result between two Interface Mappings in ccBPM
Hello, I've got a ccBPM which does two interface mappings. The second one fails. When I redo the steps manually in the Interface Mapping test mode everything works fine. Anyway, I want to get the message from the failed BPM that got out of the first
-
I am getting the following error when I compile my project. The project has both an http session listener and a taglib. This error comes when I have a <%@ taglib....%> directive in a JSP page. Any suggestions? Error(29,12): Invalid element 'listener'
-
DataSource 3.x Created and Generated in BW but cannot be found
Good morning Please assist? We use BI 7.0, but at this moment using 3.x functionality for modelling. I have created a DataSource in SAP and replicated in BW. In RSA1, on the Infosource for 3.x that I have already created, I use the menu option "Addit
-
Illustrator CS6 Mac trial download
Installs and begins to run, then freezes after I've selected "continue with trial". The pallets open along the sides of the display but after that it hangs with the rainbow wheel spinning. I'm running a Macbook with OSX 10.6.8. Thanks. PS I have al