Should iTunes version and iPod software version be the same?

My iTunes is version 7.6, but my iPod software is version 1.1
Should they be the same?

No, they are not the same. If you have a 1st Generation Shuffle you should have firmware 1.1.5. If you have a 2nd Generation Shuffle it would be 1.0.3.

Similar Messages

  • I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

    I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

    Adobe admits to a Flash problem here:
    http://forums.adobe.com/message/6285851#6285851
    YOu can apply the fix they show and tehn wait for them to fix the problem

  • Labview runs CANBus and DNP3 software model at the same time

    I have an ordinary computer which communicates with several DSPs (CANBus communiation) through Compact Rio. The physical connection is that the DSPs' CANBuses are connected together and connected into Compact Rio, then the Compact Rio is connected with a router through Ethernet, at the same time, the computer also connects with the Router through Ethernet. Based on this physical architecture, the computer can run CANBus software model on Labview to communiate with Compact Rio and DSPs.
    As I know, the communication between the computer and the Compact Rio is not real time, and the communication between Compact Rio and DSPs can be real time, can you tell me if I get the right point?
    Now we have another device named RTDS (communicate with outside through Enternet based on DNP3), and want to add RTDS into our system. I am not sure about the way to conduct the communiation. The main question is that we need to run Labview to communicate with DSPs through CANBus and RTDS through DNP3 at the same time, is that possible?
    I proposed two possible ways to conduct communication, bt not sure if it is possible.
    1. I proposed that I connect RTDS with the Router through Ethernet, and then the computer communicates with RTDS through the Router based on DNP3 and also keeps the communication with DSPs through Router, Compact Rio, CANBus and then DSPs. I am wondering if this kind of communication is available for Labview.
    2. The second possible way I proposed is that I connect the RTDS with Compat Rio (CRio keeps connecting with DSPs through CANBus) through Ethernet, and then the computer communicates with DSPs through Router, Compact Rio and CANBus, and the computer communicates with RTDS through Router, Compact Rio and Ethernet. Also, the computer needs to run Labview with CANBus sofeware model and DNP3 software model at the same time. I am also not sure if it is possible.
    The diagram of the communication system is shown in the attachments.
    Attachments:
    Commnucation system diagram.pdf ‏118 KB

    To use Mail from multiple devices, your Mail Server needs to be using IMAP protocol (iCloud Mail uses that).
    IMAP keeps the Master copies on the Server, not on the Mac the way most default POP Mail servers do.
    To keep one Master Calendar, accessible from all devices, you need a web-accessible place to keep the Master Calendar. iCloud can do that.
    ¿Do you see a trend developing here?

  • TS1424 I purchased an album from the itune store and was charged twice for the same album. How can I correct this?

    I purchased an album from the itune store and was charged twice for the same album. How can I correct this?

    You can contact iTunes support and ask them to refund or credit you for the second charge : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Do iPod touch two and iPod touch three use the same case?

    Do iPod touch three and iPod touch two use the same case?

    Yes they do. They are identical on the exterior.

  • I have an Ipod Classic, one day he appears without music, now that i want to sync with my itunes an error occur. I download all the new itunes version and ipod software but again error. How do I make it work?

    My ipod classic, have these problem:
    One day I find out that all the music was completely gone, I always charged the ipod on Ihome.
    So, I connect the ipod to my computer to sync the music, but mi computer recognize the ipod as a memory device. so delete itunes from my computer, following some support guides that i found in the mac support web. Again, it didnt work. The itunes doesnt detect it.
    then I try to sync on a macbook, then it told it was corrupted i should restore th ipod, i try it but this could not be done... cause an error occur.
    How I can restore my ipod...

    Does both your Windows and Macbook iTunes have the same library of songs?
    if it  does then, much easier to proceed, else try to load the Macbook with the same library as Windows.
    Note that only one of the Macbook USB port is good for iPod Classic, the other is too slow and may cause timeout, and I would suggest disconnect all other USB devices, while you Restore or Sync the iPod Classic.
    Connect the iPod to the Mac, (if iTunes launch, please close it back.)
    Use Disk Utility -> select the iPod Device->First Aid->Repair (use option FAT32)
    After the Repair complete, eject the iPod.
    Connect back to the Mac
    When iTunes launch, Restore the iPod when Prompted, (use FAT32)
    Sync your library.
    Good Luck!

  • IPod touch wheel and iPod software version 1.5

    Hi,
    I have a problem with my iPod touch wheel (20 GB).
    I have purchased some music on the iTMS this days, but i was unable to transfer it to my Ipod, which software version was 1.4.
    So, I decide to restore the iPod with the latest version for this model, i.e. 1.5, and to upload all the songs, using the automatically update option.
    I did it, but after uploading the music, all the playlists are empty (menu "playlists", "artists", etc...). I can't see any songs although the indication of size is correct.
    But, everything seems normal when I access the iPod by iTunes (version 5) : I can see and play all the playlists on the iPod, when I have deactivate the automatically update.
    So, I restore again the iPod, and transfer manually some playlists. I was able to browse them on the iPod, and listen to them.
    I'm using iTunes 5, on Mac OS X 10.4.2.
    Has anyone had the same problem ?

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • "requires a newer version of ipod software", i have the newest version!

    I bought the Spanish Touch Trainer and it won't sync to my 1st gen. iPod touch because of the above problem. I downloaded the newest version of iTunes as well, and it still says I have the latest iPod update. Help please.

    What version does it require?
    What version do you have?
    Original ipod touch can only go to 3.1.

  • I just bought a new computer and have tried syncing my iTunes library and iPod 160gb classic to the newly downloaded iTunes on my new computer. It is not working.

    Please can somebody help? I followed the instructions on the support page for transferring music from computer to another by downloading the music files then putting them into the iTunes music file on the new computer. Unfortunately, iTunes on the new computer is not recognising the files. I have turned on home sharing to see if I could transfer them that way. It seemed to work then disappeared entirely. I tried connecting my iPod to see if it would recognise it that way. It does recognise my iPod but not the music in it and will not sync with my new computer.
    Sorry if this is a boring subject that everyone has had a problem with but I am not able to get a proper answer on the internet. This should be easy not rocket science.
    Thanks for your help.
    LD

    Hi ldean1,
    Welcome to the Support Communities!
    The best way to get your music onto your new computer is to create a backup of your iTunes libray from your old computer to an external drive.  Follow the steps in this article:
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    You may also need to remove and reinstall iTunes and it's components.   These articles will provide installation troubleshooting steps:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923?viewlocale=en_US
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Cheers,
    - Judy

  • HT1925 My computer no longer recognises my iphone and can't be seen on itunes. My ipod works perfectly on the same computer. rebooting my iphone and PC does not fix the problem.

    When I connect my iPhone to my PC it is not recognised and iTunes does not open. When I connect my iPod to the same PC everything works perfectly. I conclude that the problem is not on the PC or with iTunes. Switching off and rebooting the iPhone and the PC does not fix the problem. Any suggestions??

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I cannot open Firefox as I get the message that Firefox failed to read configuration file. I uninstalled and reinstalled latest version and still cannot open with the same error.

    Last week when the automated upgrade came I said yes and then stopped it midway as it was not a good time to reboot my laptop. Since then, when I try to open it says cannot read configuration file - even when I uninstall and reinstall - still cannot open it with the same error.

    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • HT1349 Can i have two iTunes (mine and my husband's) on the same computer?

    My wife has an iTunes account for her iPod shuffle and I can't seem to set up my own for my iPod nano?
    When I try and sign in to my account, it freezes up?

    There is no device limit for the number of iDevices that can be synced with the same iTunes library on the same computer. Each device can have its own sync preferences with iTunes on the same computer along with iTunes creating and updating a separate backup for each device.
    Do you share the same iTunes library and iTunes account? If so, then there is no reason to have separate iTunes libraries. Each device can have its own sync preferences with iTunes. iTunes content can be added to an iTunes library from an iPhone, but iTunes content cannot be deleted from an iTunes library by syncing an iPhone with iTunes.

  • Why is it telling me that I do not have my itunes account and my apple tv on the same network and will not run my library?

    Why is my apple TV  telling me that my itunes and apple tv are not on the same account and will not load my computer library?

    From a Kappy  post
    The Best Alternatives for Security Questions and Rescue Mail
    1.  Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    2. Call Apple Support in your country: Customer Service: Contact Apple support.
    3.  Rescue email address and how to reset Apple ID security questions.
    An alternative to using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • Computer AND iPod both crashed at the same time, any hope getting my music?

    My computer and my iPod both stopped working at the same time! iPod is totally non-responsive and getting sent in for repairs, and computer is the same but they will wipe out my hard drive. Is there any hope at all getting my music back???

    If you didn't have your music backed up, the chances are small. Have you checked with your computer repair center as to whether or not they can recover anything off the drive before they have to wipe it?

  • Downloading OLDER version of ipod software

    Does anyone know how to safely change back to a previous version of IPOD software? I allowed my itunes version and ipod software to update a couple of weeks ago and have had trouble since. Someone told me to go back a version, but the problem is my ipod, not itunes. At least, I believe this b/c the files play fine in Itunes, but mess up on my Ipod. So, if anyone knows how to safely revert ipod software, please let me know. Thank you!
    PS -- my IPOD is the 80 gig video, if that helps. Thanks.

    The process for changing it back to an older version of software would be the Restore process. The only difference is that an older version of the iPod software would get installed after the iPod is erased. If you have not tried using Restore with the most current iTunes, you should definitely try that first.
    If you read about people having problems after a Restore, it is likely because they are having hardware problems with their iPod. In those cases (hardware issue), doing a Restore is not going to resolve the problem. However, in most cases, it is a software issue and doing a Restore will resolve the problem. When it works, almost no one bothers to post in the forum that +they did a Restore and it worked+, so you don't read about the times when it worked, only about the times when it did not work. And when it does not work, it's probably due to a hardware problem.
    The other problem reported often is with the 4th gen iPod (click wheel). That model needs to be plugged into the power adapter as the last step of the Restore process. Some second-hand owners don't have a power adapter (it comes with that iPod model), so the first time they need to do a Restore, they are stuck and their iPod is bricked.

Maybe you are looking for

  • Ipod classic 80gb/Windows 7?

    I ran my iPod on XP - fine - upgraded to windows 7 on new computer and now have problems.  Computer says I have to format ipod - resisted.  ITunes then says it has detected a corrupted iPod and recommends that it is restored.   Itunes restored the iP

  • Multiprovder objects missing in the Query Designer

    Hi, I have multiprovider based on 2 infosets ( as the reproting is based on master data) . Later on i have added couple of objects in master data and adjusted the infoset and activated it . The multiprovider also ajusted after adding the fields. I ha

  • Standard report in MM

    dear all,           please tell me what are the standard reports available in SAPMM for checking PO pending for release against a project,as well as against a particular vendor,as well as the total consumption of material in quantity and value for a

  • IPhoto with a lot of photos.

    Hello. My iPhoto library contains more than 20000 photos and the app works very slowly. Can I do something to speed it up? I don't want to erase any photo. Is there a theoretical or practical limit to the number of photos in one iPhoto library? My iM

  • Html page in lightbox.

    Sir, there is any way to display html page like display image in lightbox. Rajeev.