Should my UL behave like this?

Ok this is not really a "problem question" but more of a
general "is this element behaving correctly?" question..
I have created a new masthead section for my site, and have
used a right-floated UL called "rightlist" with a background image.
The UL uses padding-bottom of 46px to make the image appear fully.
Using the padding-bottom causes the UL to "overlap" the DIV's
positioned directly below and allows for a nice fluid layout.
My question is - Should the UL with the padding-bottom of
46px be overlapping the DIV below? I always thought it should
"push" the div lower down and not overlap. But I am happy with it
doing the overlapping becuase it is giving me the effect I want to
acheive!
I have highlighted the top right-floated UL with the image in
GREEN border, and the DIV in BLUE border so you can see what I mean
UL example

~Billy~ wrote:
> Ok this is not really a "problem question" but more of a
general "is this
> element behaving correctly?" question..
>
> I have created a new masthead section for my site, and
have used a
> right-floated UL called "rightlist" with a background
image. The UL uses
> padding-bottom of 46px to make the image appear fully.
Using the padding-bottom
> causes the UL to "overlap" the DIV's positioned directly
below and allows for a
> nice fluid layout.
>
> My question is - Should the UL with the padding-bottom
of 46px be overlapping
> the DIV below? I always thought it should "push" the div
lower down and not
> overlap. But I am happy with it doing the overlapping
becuase it is giving me
> the effect I want to acheive!
>
> I have highlighted the top right-floated UL with the
image in GREEN border,
> and the DIV in BLUE border so you can see what I mean -
>
>
http://www.siteoftom.com/example.html
>
To see what you expect to see, try adding height: 46px; to
that rule -
now you see what is happening?
Now make the padding for this rule - padding: 0; :-)
HTH
chin chin
Sinclair

Similar Messages

Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?

Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?
I already provided my 3 digit CVV number but Itunes again need to confirm the code whereas on my Office Computer I am purchasing Apps on Itunes without verifying my billing information again and again except once at the time of creation of account.
Please help me as I am charging by my Credit Card bank by US$ 1 each time when I give verification code.
Thanks
Talat Khatri

Try the following steps,
Sign into your computer and removal of credit card information. Here are the steps:
1) Open iTunes and sign in to the iTunes Store.
2) Select "View My Account" from the Store menu.
3) Enter your password and click the View Account button.
4) Click the Edit Payment Information button.
5) Select "None" as the payment type.
6) Click the Done button at the bottom of the page.
Reset your account password from the following link:
http://iforgot.apple.com
Phase 3:
Download a free content on to get recognized in iTunes.
To ensure your account is functioning, try downloading a free item from the iTunes Store. To do this, navigate to the iTunes Store main page by clicking the Home icon near the upper-left corner of the window. Scroll down and click the "FREE ON iTunes" link near the bottom of the main page, then select an item to download.
After you are able to download the free App try updating the billing information as usual.

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

MS Word for Mac has never supported Arabic. You have to use other apps. Mellel is best, but Pages 5, TextEdit, Nisus Writer, or Open/LibreOffice should work OK.
Sometimes you can make Word for Mac do connected Arabic if you are editing a document created with Windows Word.

Why does Mail behave like this?

More often than not, when I try to either respond to an email, or generate a new one, Mail just hangs. It will continue to do this until either 1) it finally gives up and says to select another server, or 2) I quit Mail, then open it again, at which point the outgoing mail swooshes away like it should have the first time. I would say this happens 8 out of 10 times.
The other thing that's driving me nuts is servers I have deleted from the server list keep coming back. I've tried repairing permissions right after deletion, but that doesn't help.
These two issues come together when I let Mail continue to try to send while it hangs, then it pops up and tells me it can't do it with that server, try another... and the servers I've deleted are back on the list again; sometimes, Mail has tried to use one of the re-appearing servers, or it'll offer one of them as an option.
THis is maddening. Anyone have an idea how I can get these things to stop?

Hi Dave, missed this apparently, thanks for bumping it up again.
On the Mail problem, Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
On the Server issue, are they listed in Accounts>Login Items, or set to Automount?

Just bought iBook, should the screen be like this?

I just bought a brand new 12" iBook and the screen appears to be slightly 'graduated'. That is that it is slightly darker at the top then the screen gets to a slightly lighter shade at the bottom making the dock look slightly pale and soft and lighter, compaired to the top part of the screen, which is a tad darker and more contrasty with better colour punch.
Slightly anoying. I also noticed that the actual screen appears to be slightly 'warped'. Looking at it from the side, the back part of the lid is touching the base of the computer, but the front part is a few mm higher with a slight bow in the middle, the other side has this too, but not as bad?
Are these two characteristics normal or is mine a bit faulty?

Hi! I've seen some commentary about different user's iBookG4 12.1"
displays; some about color and gradient irregularities, and a few about
having a marked varigated brightness/dullness across their screens
even though the desktop background was supposedly all one shade.
Yours is new; if this issue is an immediately known one, see about
taking it back to the seller; or call AppleCare or Sales Support if you
are unable to take it into where you bought it right away. Apple may
be able to get something done for you some resellers may not.
The iBookG4 Displays Discussion may be a place to read of some
other observations and perhaps a few thoughts in settings and maybe
(as needed?) having a certified technician inspect the machine to see
if this issue warrants some component testing and/or AppleCare repair.
See iBook Displays:
http://discussions.apple.com/forum.jspa?forumID=919
[My iBookG4 12" appears to be fine, but then I don't use it all the time.
The first optional accessory purchased for mine was AppleCare; the
second was a 1024MB Samsung/Apple RAM upgrade chip. It does OK.]
For your own peace of mind and to be sure a timely repair or replacement
of the part or the machine can be done, you should contact AppleCare
directly; perhaps even Sales Support on this "first quality" or "initial
quality" issue. If you have just bought it, and less than 10 days have
gone by, they should be able to offer you some satisfactory outcome.
I'd see about getting either another iBookG4 or a fast repair.
Good luck in this; keep a cool head and be patient with those people!

Oracle's SQL select should have a syntax like this

Oracles SQL is very powerful but lacks a basic thing the LIMIT and OFFSET syntax which
is present in postgres sql, I recommend oracle to support this syntax in future release.
more details of this syntax can be found at :
http://www.postgresql.org/idocs/index.php?sql-select.html
SELECT [ ALL | DISTINCT [ ON ( expression [, ...] ) ] ]
* | expression [ AS output_name ] [, ...]
[ FROM from_item [, ...] ]
[ WHERE condition ]
[ GROUP BY expression [, ...] ]
[ HAVING condition [, ...] ]
[ { UNION | INTERSECT | EXCEPT } [ ALL ] select ]
[ ORDER BY expression [ ASC | DESC | USING operator ] [, ...] ]
[ FOR UPDATE [ OF tablename [, ...] ] ]
[ LIMIT { count | ALL } ]
[ OFFSET start ]

I've executed the above queries against my table and the results follows :
The structure of the table
Name Null? Type
FATWAID NOT NULL NUMBER(11)
FATWASTATUS NUMBER(1)
SUBJ_NO NUMBER(4)
LANG CHAR(1)
SCHOLAR NUMBER(2)
REVIEWER NUMBER(2)
AUDITOR NUMBER(2)
PUBLISHER NUMBER(2)
SUBSCRIBER NUMBER(2)
ENTRY NUMBER(2)
FATWATITLE VARCHAR2(100)
FATWATEXT CLOB
FATWADATE DATE
TRANSLATE CHAR(1)
SELECTED NUMBER(1)
SUBJ_MAIN NUMBER(4)
I have set timing on and executed each query above, following are the statistics.
First the number of rows in the table.
SQL>set timing on
SQL>select count (*) from fatwa;
COUNT(*)
1179651
Elapsed: 00:00:13.05
The query of Andrew Clarke
SQL>SELECT fatwaid FROM (SELECT fatwaid, rownum as ranking FROM fatwa) r
WHERE r.ranking BETWEEN &OFFSET AND &LIMIT
SQL>/
Enter value for offset: 100000
Enter value for limit: 100009
old 2: WHERE r.ranking BETWEEN &OFFSET AND &LIMIT
new 2: WHERE r.ranking BETWEEN 100000 AND 100009
FATWAID
96592
96593
96594
96595
96596
96597
96598
96599
96600
96601
10 rows selected.
Elapsed: 00:00:12.02
SQL> /
Enter value for offset: 1000000
Enter value for limit: 1000009
old 2: WHERE r.ranking BETWEEN &OFFSET AND &LIMIT
new 2: WHERE r.ranking BETWEEN 1000000 AND 1000009
FATWAID
994621
994622
994623
994624
994625
994626
995769
995770
995771
995772
10 rows selected.
Elapsed: 00:00:12.00
The response time is decreasing because of use of bind variables,
but 12 seconds is a sign of poor performance.
Now a slight modification to Clarke's query
I will add order by clause
SQL> ed
Wrote file afiedt.buf
1 SELECT fatwaid FROM (SELECT fatwaid, rownum as ranking FROM fatwa ORDER BY fatwaid) r
2* WHERE r.ranking BETWEEN &OFFSET AND &LIMIT
SQL> /
Enter value for offset: 100001
Enter value for limit: 100010
old 2: WHERE r.ranking BETWEEN &OFFSET AND &LIMIT
new 2: WHERE r.ranking BETWEEN 100001 AND 100010
FATWAID
100032
100033
100034
100035
100036
100037
100038
100039
100040
100041
10 rows selected.
Elapsed: 00:00:04.00 -- time reduced from 12 to 4 seconds
A time of 4 seconds is acceptable but not good,
response time should be in milli seconds.
SQL> /
Enter value for offset: 1000001
Enter value for limit: 1000010
old 2: WHERE r.ranking BETWEEN &OFFSET AND &LIMIT
new 2: WHERE r.ranking BETWEEN 1000001 AND 1000010
FATWAID
1000032
1000033
1000034
1000035
1000036
1000037
1000038
1000039
1000040
1000041
10 rows selected.
Elapsed: 00:00:03.09 -- this reduction is because of bind variables
The query of Chris Gates
SQL>select fatwaid
2 from ( select a.*, rownum r
3 from ( select *
4 from fatwa
5 --where x = :host_variable
6 order by fatwaid ) a
7 where rownum < &HigerBound )
8 where r > &LowerBound
SQL> /
Enter value for higerbound: 100011
old 7: where rownum < &HigerBound )
new 7: where rownum < 100011 )
Enter value for lowerbound: 100000
old 8: where r > &LowerBound
new 8: where r > 100000
FATWAID
100032
100033
100034
100035
100036
100037
100038
100039
100040
100041
10 rows selected.
Elapsed: 00:00:02.04
This seems to be fast
SQL> /
Enter value for higerbound: 1000011
old 7: where rownum < &HigerBound )
new 7: where rownum < 1000011 )
Enter value for lowerbound: 1000000
old 8: where r > &LowerBound
new 8: where r > 1000000
FATWAID
1000032
1000033
1000034
1000035
1000036
1000037
1000038
1000039
1000040
1000041
10 rows selected.
Elapsed: 00:01:14.02
but this is worst when upper bound is 1 million.
Finally Myers query
SQL> select fatwaid from
2 (select /*+ INDEX(fawtaid pk_fatwa) */ fatwaid, rownum x from fatwa
3 where rownum < &UpperBound )
4 where x > &LowerBound;
Enter value for upperbound: 100011
old 3: where rownum < &UpperBound )
new 3: where rownum < 100011 )
Enter value for lowerbound: 100000
old 4: where x > &LowerBound
new 4: where x > 100000
FATWAID
122418
122419
122420
122421
122422
122423
122424
122425
122426
122427
10 rows selected.
Elapsed: 00:00:00.03 -- too fast
SQL> /
Enter value for upperbound: 1000011
old 3: where rownum < &UpperBound )
new 3: where rownum < 1000011 )
Enter value for lowerbound: 1000000
old 4: where x > &LowerBound
new 4: where x > 1000000
FATWAID
984211
984212
984213
984214
984215
984216
984217
984218
984219
984220
10 rows selected.
Elapsed: 00:00:02.02 -- with 1 million rows also satisfactory but it is not is milliseconds
The same query after using order by clause
SQL> select fatwaid from
2 (select /*+ INDEX(fawtaid pk_fatwa) */ fatwaid, rownum x from fatwa
3 where rownum < &UpperBound ORDER BY fatwaid)
4 where x > &LowerBound;
Enter value for upperbound: 100011
old 3: where rownum < &UpperBound ORDER BY fatwaid)
new 3: where rownum < 100011 ORDER BY fatwaid)
Enter value for lowerbound: 100000
old 4: where x > &LowerBound
new 4: where x > 100000
FATWAID
100032
100033
100034
100035
100036
100037
100038
100039
100040
100041
10 rows selected.
Elapsed: 00:00:00.06
SQL> /
Enter value for upperbound: 1000011
old 3: where rownum < &UpperBound ORDER BY fatwaid)
new 3: where rownum < 1000011 ORDER BY fatwaid)
Enter value for lowerbound: 1000000
old 4: where x > &LowerBound
new 4: where x > 1000000
FATWAID
1000032
1000033
1000034
1000035
1000036
1000037
1000038
1000039
1000040
1000041
10 rows selected.
Elapsed: 00:00:07.03 -- slow
SQL> /
Enter value for upperbound: 1000011
old 3: where rownum < &UpperBound ORDER BY fatwaid)
new 3: where rownum < 1000011 ORDER BY fatwaid)
Enter value for lowerbound: 1000000
old 4: where x > &LowerBound
new 4: where x > 1000000
FATWAID
1000032
1000033
1000034
1000035
1000036
1000037
1000038
1000039
1000040
1000041
10 rows selected.
Elapsed: 00:00:00.06
when I execute the same query again it is bringing records from
the SGA so it is very fast
Now which one to choose from ?
Andrew and Myers queries are good and currently I am using
Myers query.
There should be some technique to do this in the most efficient way.
any input is appreciated.

I didn't know Macs behaved like this...

Hey everyone,
I never thought I'd come to a day where a PC would be more reliable than a Mac but I guess this is the reality. I purchased my unibody Macbook approx. 2 years ago. It's had the odd crashes, applications crashing one after another etc but nothing like I've experienced a few days ago.
As I was working, all of a sudden my open applications started crashing one after the other (imaging editing software, Firefox, and then Finder). Everything started going crazy, kernel panics, would get stuck at grey startup screen indefinitely.
I decided to try and see what was wrong so tried verifying and repairing the HD, there were no problems reported. Verified and repaired permissions, some problems detected and fixed. This didn't help, it kept hanging at the startup screens, going in and out of states, like the screen would flash up like it was shutting down, then coming back to the desktop. It was going crazy.
I started it in Safe Mode a couple of times, was OK but then when you start normally, you'd get kernel panics, not leading to anything but frustration. I decided to get all my files off and reinstall OSX. I did this, and sometimes it would hang or I'd get kernel panics and it wouldn't install properly and have to be forced to shut down. I did manage to fully install it once but then again, a kernel panic happened. Basically, I tried to reinstall OSX a few times and try get it to work but there is this reccuring problem with kernel panics not allowing for progress. Some people suggest it's something wrong with the RAM. I've never forced something to shut down so many times because it just wouldn't go after 30 mins.
So what have I tried?
Hardware test at startup - no reported problems
Resetting the RAM at startup
Reinstalling OSX
Verified repaired permissions
Verified and repaired disk
I'm just so disappointed in Mac now. And frustrated. I never in a million years thought this day would come, when I expect reliabilty from a machine. Maybe this is why they only give 1 year warranty because after 2 years it could go kapot at any minute...Deeply disappointed.
Anyway, I hope someone can give me an insight at least. Thanks a lot.

If you can do so then I would try erasing the hard drive then installing Snow Leopard from scratch.
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If the drive is still working properly then the above will repair any soft defects on the drive. If all is OK then quit DU after formatting and return to the installer. Install OS X. If there are still panics then take it in for repair.

Why is my iPod behaving like this?

My iPod Touch 4th generation keeps popping up Voice Command by itself and keeps stopping and adjusting the volume by itself. Why is it doing this? There's absolutely no damage to it....I haven't dropped it and there's no water damage

Did you already try to reset it by holding the sleep and home button until the Apple logo comes up again? If this does not work, restore "as new ipod" without using the backup, in case it contains corrupt files.

Why XMLEncoder behave like this

following is my code, can someone check this and tell me whats wrong in this, because if use any inner class / outter class as a object for my JComboBox, this will not encode with giving panel.
//===================================================================
package com.ju.pdfpad;
import javax.swing.*;
import java.io.*;
import java.awt.event.*;
import java.beans.XMLEncoder;
import java.beans.XMLDecoder;
public class Test extends JFrame implements Serializable {
public JComboBox c;
public JPanel p;
//============================================================================
public Test() {
    setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
    p = getJPanel();
    if( p == null ){
      System.out.println( "null" );
      p = new JPanel();
      Object[] data = { new Integer(1), new Integer(2), new Integer(3) }; // if i use this, encoding fine
      //Item[] data = { new Item(1,"a"), new Item(2,"b"), new Item(3,"c") }; //but if i use this, then inner class will not encode
      c = new JComboBox( data );
      p.add( c );
    getContentPane().setLayout( new java.awt.FlowLayout() );
    getContentPane().add( p );
    addWindowListener( new WindowAdapter(){
      public void windowClosing( WindowEvent we ){
        encodePanel();
    pack();
//============================================================================
public class Item implements java.io.Serializable {
public int x;
public String str;
public Item(){}
public Item( int x, String str ){
    this.x = x;
    this.str = str;
public void setX( int x ){
    this.x = x;
public int getX(){
    return this.x;
public void setStr(){
    this.str = str;
public String getStr(){
    return this.str;
public String toString(){
    return this.str;
//============================================================================
private JPanel getJPanel(){
    try{
      XMLDecoder d = new XMLDecoder( new BufferedInputStream(new FileInputStream("panel.xml")) );
      Object pBox = d.readObject();
      if( pBox != null ){
        p = ( JPanel )pBox;
      d.close();
      return p;
    }catch( FileNotFoundException fnfe ){
      fnfe.printStackTrace();
    }catch( NullPointerException npe ){
      npe.printStackTrace();
    }catch( Exception e ){
      e.printStackTrace();
    return null;
//============================================================================
private void encodePanel(){
    try{
      XMLEncoder e = new XMLEncoder( new BufferedOutputStream(new FileOutputStream("panel.xml")) );
      e.writeObject( p );
      e.close();
    }catch( FileNotFoundException fnfe ){
      fnfe.printStackTrace();
    }catch( Exception e ){
      e.printStackTrace();
//============================================================================
public static void main(String[] args) {
    new Test().setVisible( true );
//============================================================================
}

Try the following steps,
Sign into your computer and removal of credit card information. Here are the steps:
1) Open iTunes and sign in to the iTunes Store.
2) Select "View My Account" from the Store menu.
3) Enter your password and click the View Account button.
4) Click the Edit Payment Information button.
5) Select "None" as the payment type.
6) Click the Done button at the bottom of the page.
Reset your account password from the following link:
http://iforgot.apple.com
Phase 3:
Download a free content on to get recognized in iTunes.
To ensure your account is functioning, try downloading a free item from the iTunes Store. To do this, navigate to the iTunes Store main page by clicking the Home icon near the upper-left corner of the window. Scroll down and click the "FREE ON iTunes" link near the bottom of the main page, then select an item to download.
After you are able to download the free App try updating the billing information as usual.

Text is so small and hard to read...should it really be like this?

I have the 27 in screen- and must be the only person alive who is hating it.
WHY is all the text so small now? One would think on a large screen it would be BIGGER not smaller?
I came from a 14 in Dell monitor and everything was SO MUCH easier to read on there compared to teh 27 in screen.
I realize I can zoom in on pages in safari, but I have to do that for each page. (pain in the butt).
The text/words/buttons in photoshop are small as well, as in all my software I'm using.
Please someone tell me there is a remedy to this so that I can operate my programs without having to use a binocular at the computer desk. I can't figure out why everything is so freaking small on a Ginormous screen.

I think the short answer as to "why?" would be the monitor has a higher pixel density. You're probably running the monitor at its maximum native resolution (2560 x 1440). You could try one of its other resolutions (1920 x 1080 or 1280 x 720) but I don't think you'll be any happier with those either.
Didn't you take a look at the monitor (or the 27" imac) in a local apple store before deciding to buy it?

My 13" Mac Pro behaves like everything is in slow motion. Takes forever to do anything, on or offline. Would this be a software conflict or a hardware problem?

My 13" Mac Pro behaves like everything is in slow motion. Takes forever to do anything. Wondering if this is a software issue or a hard drive problem?

Maybe some maintenance will help:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc. Other utilities are also available such as Onyx, Leopard Cache Cleaner, CockTail, and Xupport, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). The key behaves the same for the laptop keyboard and for an external Apple keyboard? This just started in last week after 6 months of use

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.

I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future.

When i pluged in my ipod,computer start scanning,it says"your computer is no more authorized for app that are installed in"yadav ipod",would you like to authorizes this computer for item purchased from itune" what should i do to fix this problem,,,

when i pluged in my ipod,computer start scanning,without finishing scan,it says"your computer is no more authorized for app that are installed in"yadav ipod",would you like to authorizes this computer for item purchased from itune" what should i do to fix this problem,,,

What the message says. In iTunes g the the Store tab in ther upper part of the screen and then clink on Authorize this computer.

Importation ;I just started with lightroom 5,6 (french)-I 'd like to import with creation of a second copy apart of the catalog but impossible to activate this option.How should I do to activate this option?

Importation ;I just started with lightroom 5,6 (french)-I 'd like to import with creation of a second copy apart of the catalog but impossible to activate this option.How should I do to activate this option?

Importation ;I just started with lightroom 5,6 (french)-I 'd like to import with creation of a second copy apart of the catalog but impossible to activate this option.How should I do to activate this option?

The Best Director is STILL 8.5, further version SUCKS! Director 12 should be like this:

Dear Adobe and All Director Users,
I'm David Setiabudi, lecturer from Indonesia, a Macromedia Director user,
a loyal one, has making 100 free games in www.divinekids.com
Sample : www.divinekids.com/messiah.zip    RTS Game Strategy about Jesus
and disciples.
Although I own Macromedia MX 2004 ORIGINAL, cost $1200, and tried
Adobe Director versions, for me (sorry) It's getting worse.
These two are the major problem :
1. First of all, the full screen system is getting worse, there always a line frame
    in Adobe Director full screen.
    In the 8.5 this simple script can help :
    (the stage).drawRect = the desktopRectList[1]
    (the stage).rect = the desktopRectList[1]
    or other Xtras as well.
2. The MUCH BIGGER SIZE of exe
3. Hard compatibility for html - dcr for distribution.
   Maybe : Distribute Flash Player and Shockwave Player in ONE
Me and many more Indonesians Director, still using 8.5. Coz further version is getting WORSE.
No wonder Flash is more popular ever, (maybe we can ) BLAME it on the Adobe Director developers.
If there's Director 12, I suggest it should be like this:
1. Fix thosse three problem above
2. Can be use on various platforms, such as Androids, mobiles, iPhone, etc
3. Attach samples of making multiuser online chats,
   how to make a game and publish the best score IN THE WEB
   (INCLUDE the php/ XML/ whatever that should be uploaded in the web)
I hope Director 12 is not a crap, another loser version, so I can proudly move to Director 12,
and upgrade my version. For now, I'd rather Downgrade. Don't publish Director 12 until
the Adobe "scientist" can make those progress. Sorry for being harsh, I just REALY CARE
about Director future.

Then it should be Director 13 then.
The Director 12 is still not satisfiying.
Among all the 'demands' there's only the Iphone one is done.

Should my UL behave like this?

Similar Messages

Maybe you are looking for