Should not create any output file when invalid input source schema

I have a xslt file, which I have make code to check the order status value.
If OrderStatus != 'Reject' --> create attribute, element for output file
Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
Requirement: if OrderStatus = 'Reject' --> do not create any output file.
how to do with this requirement?

I'd ask them over here.
http://forums.asp.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Should not create any output file when transform with xslt file

I have a xslt file, which I have make code to check the order status value.
If OrderStatus != 'Reject' --> create attribute, element for output file
Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
Requirement: if OrderStatus = 'Reject' --> do not create any output file.
how to do with this requirement?
any help will be appreciated!

Do you mean the xslt file always return the output file?
I have tested this xslt file following (only xslt file, not run in BizTalk project):
Create a blank console application using visual studio and add attached xslt file to newly created console app. Next open the XSLT file and select input file and output files and start xslt debugging to create output file.
I want to edit the xslt file how to cannot create output file in the case OrderStatus = Reject.
I don't say in particualr xslt file, its actually your map as a whole that returns a output message on successful execution.
since you are testing the xslt file as individual file, you are able to control it as per need. i mean you can write incomplete code or any kind of output elements that are not present even in schema. But when you set the map properties to use external
xslt , map completely relies on xslt and xslt has to produce output that matches the output schema structure.
So you better test your xslt by setting it to your map. Once you set map properties to use xslt, you can test your map by right clicking on map and choosing test map.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

I want XSLT do not create any output file

I have a xslt file.
<xsl:variable name="var:InValidReceiptCount">
.... In here. I want xslt do not create any output file, also an empty file
</xsl:variable>
Thanks for helping :)

If you can tell us your application scenario and why you are trying to control the output name only with xslt, then we can drive you towards correct direction. Remember you cannot control output path with xslt.
if you are using bizTalk, you have to use xslt with maps and set the output path at ports
if you are using .net, you have to control it from your dotnet code.
Xslt alone cannot control the output path.
Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Log4J not creating any output file

Hi,
I've just started looking at log4j and following a simple example online.
I have the folowing properties file
log4j.rootLogger=INFO, stdout, logfile
[color=#444444]
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
log4j.appender.stdout.layout.ConversionPattern=%d %p [%c] - <%m>%n
log4j.appender.logfile=org.apache.log4j.FileAppender
log4j.appender.logfile.File=c:/mylog.log
log4j.appender.logfile.MaxFileSize=512KB
# Keep three backup files.
log4j.appender.logfile.MaxBackupIndex=3
# Pattern to output: date priority [category] - message
log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
log4j.appender.logfile.layout.ConversionPattern=%d %p [%c] - %m%n
[color]
I have the properties file in my classpath.
Problem is the file never gets created. The output goes to the console alright. What step might I be missing? I just followed this tutorial.
http://vegdave.wordpress.com/2006/08/31/how-to-con...n-tomcat-for-one-of-your-apps/
looks very simple but can't get it to work, no errors being thrown in the console

user13477955 wrote:
I have the properties file in my classpath.Runtime classpath?

The system could not create any outputs for mv type 561

Hi,
I tried to print out a goods receipt others in MIGO and i received "The system could not create any outputs" when i tick on output control. I tried to follow the steps in How to print the material document in MB1C movement 561 I stuck at step 4 where i cannot find MvT 561. Please help
Chk your setting as below to get GR print out.
. Maintain the Printer Name in MM->Inv Mgmt and Phy Inv->Print Control-> Gen Settings-> Printer Setting Enter the local printer where you want to print your Goods posting document
2. Ensure that in MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In MM->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311,313,501,521,561 etcu2026 Maintain the Print item as 1--Material document printout
5. In MM->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In MM->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc , Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

issue is resolved

Report RCCLROUT does not create any output

Hi experts,
I hope someonw can help me on the following incident:
Running report RCCLROUT from se80, I do not get any output.
However, the report#s description says:
*& Creation of routing IDOCs to a given selection                      *
*& This program selects to an input given via the selection screen the *
*& corresponding routing data from the database. Then the function     *
*& module for creation of routing idocs is called.                     *
*& In general this report is called from the report RCCLMDAT, but it   *
*& can also be used for its own.                                       *
I read the source code an found out, that the selection is not used.
In my simple understanding, just the function call should be un-commended.
*&   Event START-OF-SELECTION
START-OF-SELECTION.
*CALL FUNCTION 'CLOI_ROUTING_READ'
*     EXPORTING
*          date_fr   = date_fr
*          date_to   = date_to
*          lot_fr    = lot_fr
*          lot_to    = lot_to
*          mestyp    = mestyp
*          logsys    = opt_sys
*     TABLES
*          matnr_ro = matnr_ro
*          werks_ro = werks_ro
*          rout_data = t_mapl
*     EXCEPTIONS
*          others    = 1.
*&   Event END-OF-SELECTION
end-of-selection.
As nobody changed the report and it is last used by SAP, I woder myself about how to get my LOIROUT02 EDI File....
BTW: all of the other reports in this development class are working fine.
I'd be thankefull for any response...
Data of SAP: 4.6C;
Data of Report:
Title       Generate Routing IDocs
Original language      DE   German
Created                29.01.1997       SAP
Last changed by        01.04.1998       SAP
Status                 Active
Type                  Executable program
Status
Application           PPC
Authorization groups
Development class     CLOI                  for logistics optimization
Logical database
Selection screen

Thank you very much for your quick response.
I have implemented Userexits for Planed Order, Production Order and Work Center to fill my extension segments.
The Settings are defined correct and the Data (Files) are created for the above and the BOM Files.
(BOM s are also used in standard)
Only the Routings (in Standard) are not working correct.
I have no RFC components and therefore nothing to configure. All of the other settings did work (at least) for
- LOPLO01
- LOPRO01
- LOIBOM01
- LOIWCS01
I will try to use FUB CLOI_ROUTING_SEND instead.
If this works, than it's a bug of the report as far as is see.
FUB CLOI_ROUTING_SEND works fine!!!
Any ideas?
kind regards
Christoph
Edited by: Christoph Huber on Dec 1, 2008 10:21 AM

Flash CS6 does not not create an .app file when I Output as application with runtime embedded

I am attempting to create an application with runtime embedded, but the process keeps failing without throwing an error. Specifically: in Air Settings, I select Output as: Application with runtime embedded. When I build it this way, Flash tells me that it's created Telepath Tactics - Steam.app...
...but no .app file ever actually appears in the folder:
This happens regardless of what I include in the Library Path, and regardless of the Default Linkage settings. (When I tell it to Output as: Windows installer, by contrast, the appropriate exe file appears without a problem.)
I'm using Flash Professional CS6 v. 12.0.0.481 on Windows 7, 64-bit.

I should note that this only occurs on certain windows machines. I am still waiting to hear which ones.
I personally do not experience this so I have to rely on Client feedback.
On my machine it works fine without Flash installed.

Can not create a temporary file when trying to open an attachment

Hi just got the new BB Z10. Just upgraded the software and now I can not open any attachement anymore. Error , cannor create a temporary file....,
Anybody experienced same problem?

Try to restart the phone by holding the top button for about 3 seconds, and then the restart at the bottom right of the screen
I f that fails, keep the phone on, then pull the battery out, wait for about a minute or two and then re-insert
Using the Playbook and the Z10 and the Z30 and loving them
Martin

Photoshop CC will not import any video files when I try Video Frame to Layers and New Video Layer from File

Specifically I'm trying to import a .MOV I made in Quicktime. The file opens up everywhere else so it's not an issue with the file being corrupted. The error message I get from CC is
"Could not complete command _____________ because the video file could not be opened."
As far as I know I didn't save the .MOV with any permissions, but then again I have very limitted understanding of Quicktime. Originally the file was a .GIF that I converted to an .MOV because I wanted to edit the GIF using the video timeline instead of the animation timeline.
Thanks for the help.
Also, as an aside since I know a lot of Adobe employees are on here, the animation timeline is pretty crummy, there should be a way that you can open a .GIF into the video timeline as a video layer.

Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

Why does text on certain portions of websites, usually when adjacent text contains special characters, become jumbled into seemingly random sets of characters that are not in any way jumbled when viewing the source of the webpage? How can I fix this?

When viewing most text on most websites, it displays properly. However, there are two instances where text will either tend to, or consistently, become jumbled into a mess of seemingly random characters. Oddly enough, these seemingly random characters are not, in fact, random. The same weird character will be used to replace the same regular English text character consistently across the entire area that has been jumbled.
The two instances where this tends to occur most often, or consistently in some cases, are, first, when a paragraph or particular section of formatted text contains special characters, such as Chinese or Japanese characters, or accented letters. When this happens, usually the paragraph that contains the special characters is completely jumbled, while the rest of the text on the page will have intermittent jumbling on a word or two. Most often, the word "the" is jumbled in this case.
The second instance where this happens is when a website uses specially formatted text in some form or another. I, not being an expert at web development, am not sure what kind of formatting causes it, but I can provide consistent examples in lieu of my experience:
- Example 1:
[http://img408.imageshack.us/img408/9564/firefoxcharencodingissu.jpg]
Example 1 shows a portion of a screen-shot of the website "Joystiq.com". Every single article title on the front page of this blog is consistently jumbled, while the text of the article itself remains untouched. Please note that when this jumbled text is highlighted, it is visible un-jumbled in the right-click menu as well as in the source code of the page. Other consistent instances can be found within many search fields on various websites. For instance, the search bar located at the top right of "Kotaku.com" consistently displays jumbled characters both on its default text of "Search" and on any text that is typed into the search box itself.
- Example 2:
[http://img822.imageshack.us/img822/9564/firefoxcharencodingissu.jpg]
Example 2 shows both the jumbling of the paragraph containing the character "☆" as well as the subsequent peppering of the rest of the article's text with small jumbled words. Below this is the DOM Source of the selected text which shows how the text itself is being rendered properly within the site's source. Additionally, for convenience, I have edited on to the bottom of the image a small snippet of what the search bar on the same page looks like. Notice how the grayed-out text that normally would read "Search" is instead jumbled.
This issue has been plaguing my browser for the past year or so, and I had hoped that it would go away with subsequent Firefox updates. It has not gone away.
Thank you for reading! Please help!

This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 
Helvetica Neue abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page. 
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps

How do I create a photo in jpg or other photo format from a frame within iMovie11. The suggestion I have found from earlier versions of iMovie does not create a jpg file that can be revealed in Finder. Help please.

How do I create a photo in jpg or other photo format from a frame in iMovie. The previous suggestions on here do not create a jpg file when you chose reveal in finder when using iMovie11 and OS X

First, get an app called MPEG Streamclip, which is free. (google MPEG Streamclip from Squared 5)
Open MPEG Streamclip.
In iMovie, select the clip you need. Then, right-click/Reveal in Finder.
Drag this clip into MPEG Streamclip
In MPEG Streamclip, move the playhead to the frame you want.
In MPEG Streamclip, click FILE/EXPORT FRAME.
Choose JPEG, TIFF, or PNG and give it a name.
You can then drag this photo into iPhoto.
Here is a video I made that steps through this...
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

save as does not Create PDF Compatible File even when the creare pdf compatible files is on, Illustrator CC 2014

When I open is adobe acrobat I get this message.
"This is an Adobe® Illustrator® File that was
saved without PDF Content.
To Place or open this le in other
applications, it should be re-saved from
Adobe Illustrator with the "Create PDF
Compatible File" option turned on. This
option is in the Illustrator Native Format
Options dialog box, which appears when
saving an Adobe Illustrator le using the
Save As command."

How do i Restore Preview as my default viewer when using Safari,seems adobe has hi jacked Safari,if i uninstall adobe safari will not open any pdf files.

How do i restore Preview as my default viewer.
Seems adobe has hi-jacked Safari and and opens using abobe not preview.
Have uninstalled adobe but safari then will not display any pdf files.
Preview still works fine to view existing downloaded files.

Niac --
What kind of files? PDFs? or Others as well?
If you want Preview to open all PDFs, then find a PDF on your HD.
Highlight it, and then press the Apple/Comand key along with th letter " i " key.
When the window comes up, look down to the "Open with" line, and change it from Adobe to Preview.
Then look slightly below, and select "Change All."
Now, all PDFs should open with Preview.

.jpg files created on iphone 4S are not recognized as .jpg files when uploading them to American Heart Assoc. website?

.jpg files created on Iphone 4S are not recognized as .jpg files when uplaoding to American Heart Association fund raising webpage? .jpg's from Canon camera uploaded without any problems? The website automatically reduces the file size to <100kb.

I haven't contacted AHA about this issue. The .jpg files created on Canon SLR uploaded correctly, but the photo from iPhone which was emailed to my PC using MS IE. The .jpg was browsed to from my desktop and is submitted. It shows up in draft form then when uploading it fails saying it is not a .jpg file or .png file? I have had other issues in the past emailing iPhone pictures. They were not editable after being sent to a PC. I guess we can retake photos with a non-Apple camera.

Not getting any output when running the Webservice through Xacute

hai all,
I am using a transaction as web service to be called in another transaction in the same server. I can see the output of the web service in the tracer, when I execute it in the BLS. But if I run the same transaction via xacute query I am not getting any output. I had read in one of the threads that reference document has to be assigned. I tried doing that also, but no luck. Can somebody pls. throw some light on how to use reference document & whether it is required in my case?
Thanks,
vidhya

Hai Rick,
thanks for the hint i have used document and row actions now iam gettting output through xacute...
thanks,
vidhya.

Should not create any output file when invalid input source schema

Similar Messages

Maybe you are looking for