Should payer affect the ability to combine orders to single delivery?

My customer wishes to combine sales orders that go to the same ship to party but have a different payer. I've been trying to get this to work and have created two orders (identical) that will create a single delivery when the payer is the same but if I change the payer I end up with two deliveries.
I've checked:
Shipping point
Date that delivery is due
Ship-to party
Route (same method of transport and route)
Incoterms
Partners in delivery header - just sold to and ship to listed.
All the same.
Can anyone let me know if this is correct or not.
We do have credit management - could this affect it?

In normal circumstances, Payer will not be considered in delivery split.  You may check what payment terms is maintained in that payer master.  May be once the delivery split happens, you can compare before saving the delivery.  Also you can check for the following parameters due to which delivery split will happen.
a)  if the material is different, you can check the material master for transportation group, business area, profit center etc.,
b)  Shipping Condition of Payer / Ship To Party
thanks
G. Lakshmipathi

Similar Messages

  • HT201301 where should i save the files to, in order to acces them

    where should i save the files to, in order to acces them

    What files?
    To access from where?
    Please explain

  • Combining several orders in single delivery

    Hi,
    I want to combine sales orders which have different requested delviery dates. There will not be availability check in the order creation phase. The planning results will not be updated in item schedule lines. Rescheduling will not be run. So is that possible to combine multiple sales orders with different requested delivery dates in one single delivery without taking into account the item schedule lines?
    So the delivery date should be the date of delivery creation date. It shouldn't take into account the requested delivery dates even if they are different.
    For example
    order1 requested del. date 08.06.2009
    order2 requested del. date 10.06.2009(future)
    In case of that the materials are already produced for the second order too. We should be able to combine order2 and order1  in one delivery document on 09.06.2009 and ship them.
    Keep in mind that requested delivery date is entered as the goods issue date in the order creation. Because transportation lead time is 0
    Thank you

    Hi Friend,
    Single delivery for multiple deliveries can be possible with some configuration settings.
    1. In the copy controls from the sales order to delivery VTLA  the combination requirement should be 051
    2. The order combination field in the customer master should be activated .
    3. In the VTLA the copy item number should be deactivated
    regards,
    santosh

  • Combined order based and delivery based billing

    Hey Gurus,
    We are using ZTAN items and ZTAD items on the sales orders.  We are trying to figure out how to combine these two together to create one invoice.  Can you guys help us with what the configuration should be in order do this?  I woudl like to knwo what settings I need to make in item category and also what settings need to be changed in the copy controls?  Do I need to change them for F2 and other settings in VTFA?
    Please let us know.
    Sincerely,
    Nina

    Hi,
    Delete the Assignment number and Reference number in the copy control at the header level details in VTFA.
    For this message and try it .
    We are using order based billing for the ZTAD items right now and using delivery based billing for the ZTAN items. So, to answer your question, we do want to combine these two together.
    I have tried setting the VTFA copy control settings to 001, and I still can't seem to get the two line items to combine.
    Note, I only created a new copy control for the ZTAD items.
    I looked to see if the header data was different and this was the log that was outputted but I can't seem to figure out what this means:
    Fld Name $000000001 $000000002
    Combination criteria in the bi 0013030 00330308000000064
    Assignment number $
    I am not sure how to analyze this. If you have any suggestions, I would be really appreciative. Thanks for all of your help Shivaji.
    Sincerely,
    Nina

  • How should i use the two results sets in one single report data region?

    Hi frnz,
     I have to create a report using the below condition...
    Here my given data  set query gives you the two result sets ,so how should i use that two result sets information in single report....when i accessing that data set query it will take the values off the first result set not for the second result set.
    without using sub report and look up functionality..... if possible
    is there any way to achieve this.....Please let me know..
    Thanks!

    You cant get both resultsets in SSRS. SSRS dataset will only take the first resultset
    you need to either create them as separate queries or merge them into a single resultset and return with ad additional hardcoded field which indicates resultset (ie resultset1,resultset2 etc)
    Then inside SSRS report you can filter on the field to fetch individual resultsets at required places. While merging you need to make sure metadata of two resultsets are made consistent ie number of columns and correcponding column data types should be same.
    In absence of required number of columns just put some placeholders using NULL
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Two sales order and single delivery

    hi friends,
    can we do delivery  for two sales orders in a single step????
    (SP , SH BP, PYare same and delivery date also)
    thanks
    manu

    Hi manu
    to combine multiple orders into single delivey check wheather the follwoing are met or not
    Shipping Point
    Ship to party
    Inco Terms
    Transportation Group
    Exchange rate
    Delviery date
    Unloading point
    Route
    To combine multiple deliveries into a single billing document check wheather the following are met or not
    Payer
    Billing date
    PO number
    Regards
    Srinath

  • Multiple Sales Order to Single Delivery

    Dear All,
    Can anybody tell me how to create a single sales order to multiple delivery ?
    It would be convenient if anybody can explain me the process and the t-code to do the same.
    Rgds,
    Indrajit

    Hi Indrajit
    If you want to create a single sales order into Multiple delivery then make sure that the delivery split should take place
    The following are the parameters for the delivery split
    Ship to party ,  route , delivery date, Shipping point ,Confirmed quantity date  , Delivery priority
    Example :
    Say you have line item 1 & line item 2 , for line item 1 you have different ship to party and for line item 2 you have different ship to party then delivery split will take place for this two line items
    Regards
    Srinath

  • Where should I copy the "libflashplayer.so" in order to make the plugin work?

    Hello, I run on unbuntu 10.10. I've recently downloaded firefox 4 and it works fine, except the fact that it can't find the flashplayer plugin already installed. How can I make it work, by copying the libflashplayer.so in the proper directory for instance?

    A possibility is to create a plugins folder in the Firefox installation folder and place a symlink to the Flash plugin file libflashplayer.so in that folder.
    See also:
    *http://kb.mozillazine.org/Determining_plugin_directory_on_Linux

  • Billing experts: Combining order related and deliv. related

    Hello Billing experts,
    I am just wondering if it is possible at all to combine order related and delivery related to ONE billing document (one DMR and one delivery note with the same payer).
    Or do we have to use Invoice List? I can't make it work.
    Same payer, same Payment Terms and different pricing procedures(with RL00). What other fields that must have identical values, so the billing documents will be grouped in the invoice list?
    Thanks alot in advance!
    Best Regards,
    Tuan Vo

    Hi Tuan Vo
    Since there are many other criteria, its not a viable Solution to combine, order related and delivery related to one billing document even though its possible in SAP.
    The following prerequisites must be met for a Single Invoice from Delivers and/or orders:
    1) the header data appearing in the billing document must agree
    2) the split conditions specified do not apply
    As you see, the Delivery related Invoice has always a pre-checking with the Goods Issue status where as Order related doesn't have to.
    Hence Invoice lists is the option given by SAP.
    However, with an intelligent Copy Control routines between the documents should do the trick.
    The system combines documents with the same customer number, proposal billing type and sales organization, and attempts to include them all in the same billing document. If the preconditions are met, then a single invoice is created for the deliveries and/or orders.
    Note that When creating several billing documents, user exits can be used to reset the header data, so that more can be combined than in the billing due list and later combine to single document.
    There are other fields like Material Group, Billing Dates, Billing Document Type, Item categories which can force for an Invoice split.
    Please let me know if it helps.
    Best Regards
    Ajay Kumar Veeranki

  • Auto Confirmation for combined order with quantity distribution

    Dear All,
    we need your help that we have using the auto-confirmation for normal production order , but got the problem in combined order confirmation for final operation , in final operation we are not getting quantity distribution with respect to child order.
    please suggest any BAPI is there?

    Not possible in standard system.

  • Query Drill Down without affecting the structure layout

    Hi All,
    We have a query which has structure both in Rows & Columns . When we drilldown ( WAD )  the drilldown characteristics goes within the structure . What i want is even we drilldown  the sturcture layout shoud not chnage .
    For example the structure is as below
                    2007   2008
    Revenue    100     200
    Cost          50       100
    Margin       50        100
    say we drill down by material , then i want the layout to be like this
    Material    0001                       2007   2008
                                 Revenue    50       100
                                 Cost          25       50
                                 Margin       25       50
    Material    0002                     
                                 Revenue    50     100
                                 Cost          25     50
                                 Margin       25     50
    currently we are getting
                           2007   2008
    Revenue
    Material 001     50       100
    Material 002     50        100
    Cost   
    Material 001      25      50
    Material 002      25      50
    Margin
    Material 001      25     50
    Material 002      25     50
    We are currently in BW 3.5 version . Is there any settings in WAD or anywhere , by which the drilldown should not affect the structure layout. ( Please note i dont want to fix the drilldown in query  or swap axis during navigation to get the desired result ).
    Kind Regards
    Sudip

    Hi,
    For the example shown by you, does not require 2 structure, You can doing it using One structure.
    Consider the following in Rows and Columns:
    Rows:
    1. Material or other cahar and material in Free char.
    Columns:
    1. Fiscal Year
    2. Structure comprising the KFs Revenue, cost and Margin.
    Try this it should solve.
    Regards,
    Vishwa.

  • User exit for the release of Purchase Order

    Hi Friends,
    I am searching for a user exit which should trigger at the time of Purchase Order release in ME29n transaction.
    If anyone can help me for the same....!!!
    I need the exact exit which triggers at the release of PO....
    Points will be rewarded for the needful replies.
    Regards,
    Mandeep.

    HI,
    Finding the user-exits of a SAP transaction code
    Enter the transaction code in which you are looking for the user-exit
    and it will list you the list of user-exits in the transaction code.
    Also a drill down is possible which will help you to branch to SMOD.
    report zuserexit no standard page heading.
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
             tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
       select single * from tadir where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
       move : tadir-devclass to v_devclass.
          if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
                move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
            select single * from tstct where sprsl eq sy-langu and
                                             tcode eq p_tcode.
            format color col_positive intensified off.
            write:/(19) 'Transaction Code - ',
                 20(20) p_tcode,
                 45(50) tstct-ttext.
                        skip.
            if not jtab[] is initial.
               write:/(95) sy-uline.
               format color col_heading intensified on.
               write:/1 sy-vline,
                      2 'Exit Name',
                     21 sy-vline ,
                     22 'Description',
                     95 sy-vline.
               write:/(95) sy-uline.
               loop at jtab.
                  select single * from modsapt
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                       format color col_normal intensified off.
                       write:/1 sy-vline,
                              2 jtab-obj_name hotspot on,
                             21 sy-vline ,
                             22 modsapt-modtext,
                             95 sy-vline.
               endloop.
               write:/(95) sy-uline.
               describe table jtab.
               skip.
               format color col_total intensified on.
               write:/ 'No of Exits:' , sy-tfill.
            else.
               format color col_negative intensified on.
               write:/(95) 'No User Exit exists'.
            endif.
          else.
              format color col_negative intensified on.
              write:/(95) 'Transaction Code Does Not Exist'.
          endif.
    at line-selection.
       get cursor field field1.
       check field1(4) eq 'JTAB'.
       set parameter id 'MON' field sy-lisel+1(10).
       call transaction 'SMOD' and skip first   screen.
    *---End of Program
    USE THIS PROGRAM TO GET ANY USER EXIT BY GIVING THE TCODE.
    MMFAB001            User exit for generation of release order
    MRFLB001            Control Items for Contract Release Order
    REGARDS,
    PRIYA.
    Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:21 AM
    Edited by: Priyadharshini Veluswamy on Mar 13, 2008 9:40 AM

  • My i-photo app gone, how do I get my photos?  I know they should be on the i-cloud?

    Where can I get the Apple i-photo app?  When I go to the Apple store I don't find the original app that I got with my Mac. I have over 4000 photos that I can find. Help,  I did a lot of updates today, updated to OS X Yosemite 10.10.3 then found my app not working.

    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Sun light affects the camera sensor?

    Hi
    I have a lumia 1520 and once driving, my phone's camera was exposed to sun light for about 5 hrs as i put it on my car's dashboard.
    after then when i take a photo i feel my images got worse in quality and color.
    Am i suspicious or sun light really affects the camera sensor?

    Hi, AmirTofighi. Any chance you can attach sample photos? The sunlight should not affect the camera sensor AFAIK. However, we like to further check on this since you have laid the scenario.
    BTW, if this is using the built-in camera app, try using lens app and compare. Also, if you have a friend who is using the same model of the device, it would not hurt to check and compare the images taken on both devices.
    Hope to hear from you soon. :-)

  • List of sales order line items delivery

    Hi All,
    I want to know from one single table, the list of sales order line items delivery completed and still having stock.
    Ratna

    Hi
    Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
    Regards
    Brahmaji

Maybe you are looking for