Should Solaris release 2 be used? (6isolaris2.tar)

Solaris forms/reports release 2 contains forms 6.0.8.11.3 and reports 6.0.8.11.2. It is NOT a patch and contains later releases than 6i patch set one. Release 2 is also missing webDB. It also appears that the documentation has not been updated from the first release.
Note: For solaris 7 the documented required patches are definately not up to date.
Should I install release 2 at all? Would it be better to use the first release + patch set one?

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by William Faulk ([email protected]):
Solaris forms/reports release 2 contains forms 6.0.8.11.3 and reports 6.0.8.11.2. It is NOT a patch and contains later releases than 6i patch set one. Release 2 is also missing webDB. It also appears that the documentation has not been updated from the first release.
Note: For solaris 7 the documented required patches are definately not up to date.
Should I install release 2 at all? Would it be better to use the first release + patch set one?<HR></BLOCKQUOTE>
Any ideas on this one? We are also thinking of using this. But not very sure whether it is stable enough to put it on production machine.
null

Similar Messages

Poll: Should NI release a full 8.0.1 installer?

I have created a poll on the LAVA forums, here:
Should NI release a full 8.0.1 installer?
http://forums.lavausergroup.org/index.php?showtopic=2807
Cast your vote, so that your voice will be heard.
Regards,
-Jim
Message Edited by Jim Kring on 03-08-2006 08:35 AM

Chris,
I just checked my LabVIEW 8.2.1 installation, and the version of the NVIORef.dll in the Runtime directory is still 8.2.0.131.
BUT: this is not the only content of the Runtime directory, as you can see in the screenshot attached to this post.
What OS are you using? If it is Microsoft Windows 2000, be sure to have at least SP3 installed before running the LabVIEW-RTE Setup.
Regarding the broken Test Panels in MAX - do you have any drivers installed (VISA, DAQmx, ...)? If so, did you reinstall them after running the LabVIEW 8.5 setup?
From my personal experience, I dare recommend you a clean new installation of both LabVIEW versions and the 8.2.1 runtime engine, best performed in the version order (7.1, then the 8.2.1 RTE, than 8.5.
There is a forum entry with a download link to MSI blast and a very good PDF which points you to the Windows Registry keys that you need to delete after deinstallation, which you can find here:
http://forums.ni.com/ni/board/message?board.id=250&message.id=34373&requireLogin=False
I think it's worth giving a try.
Attachments:
version check1.gif ‏59 KB

Solaris Release Upgrade Path u3 to u8

Hi,
I would like to upgrade Solaris Release from u3 to u8. In the same ref. I have below queries.
Can I directly upgrade from u3 to u8 ?
Whether I need to upgrade first u3 to u6 and then u6 to u8.
Please suggest.
Thanks
Rajan

Hi, Boot from U8 CD and try to follow the steps mentioned in Oracle Doc # How to verify a system can be upgraded to Solaris 10 using pfinstall (Doc ID 1004440.1)

User should not release the PR which is created by him

Hi
We didnu2019t use work flow functionality for PR Release. So same user can create PR and release the same PR in our system. Our requirement is user should not release the PR which is created by him. I would like to put this control in system.
How can I achieve this requirement?
Thanks
Jeny

Hi Ravi
Thanks for your reply. but they need to have authroization for PR release . bec they are eligble to release PR as per delegation of authroity. but they should not release their own PR . they can relase other's PR within their level.
Jeny.

Locking in EntityFramework - calling empty stored procedure releases lock acquired using sp_getapplock

I have a patient table in the SQL Server database. Clients connect to the database and checkout one of the patients and do some operations on it and save it afterwards.
Since multiple clients might access the patient at the same time. I wanted to implement pessimistic locking mechanism, So that if one client can acquire a lock to a particular patient at a time.
Also if one of the clients locks a particular patient and either crashes or closes the client application the lock should be released. In case of crash the lock should be released when we detect that the connection of client with the database is closed.
I found out that I could use sp_getapplock and sp_releaseapplock to
do achieve this and specify @LockOwner
= 'Session' when calling sp_getapplock,
this ensures that the lock is released once the database session with the client closes.
From the code, I call a stored procedure in database to acquire the lock. This acquires the lock correctly and if i close off the client app or the client app crashes the lock is released. This is behaving as I wanted it to.
The problem happens when I call another stored procedure which is supposed to release the lock. As soon as the stored procedure is entered the lock is released, before we even execute sp_releaseapplock
@patientId, @LockOwner = 'Session' the line which is actually supposed to release the lock.
I tried creating an empty stored procedure (just commented out
DECLARE @result int
EXEC @result = sp_releaseapplock @patientId, @LockOwner = 'Session'
This stored procedure still releases the lock I acquired using sp_getapplock.
I can't seem to understand why this is happening. It should only release when I explicitly call `sp_releaseapplock @patientId, @LockOwner = 'Session'``
CREATE PROCEDURE [dbo].[uspReleaseAppLock]
@patientId nvarchar(max), -- Patient ID
@ReturnValue int Output
AS
BEGIN
DECLARE @result int
EXEC @result = sp_releaseapplock @patientId, @LockOwner = 'Session'
SET @ReturnValue = @@SPID
END
Could someone tell me why this is happening. What am I missing here ? I checked that the session ids of both the stored procedures (for acquiring and releasing the lock) are same, so it dose not seem that a new session is being created by entity frame work
for each call to the stored procedure. Something else is going on which I am not able to comprehend. Any ideas ?

Hi oalvi,
The Stored Procedure(SP) sp_getApplock initialed with "@LockOwner='Session'" is
session scoped. Your procedure
[dbo].[uspReleaseAppLock]
did the same work as you explicitly call "sp_releaseapplock @Resource = @patientId, @LockOwner='Session'", after the SP
uspReleaseAppLock
called or the current session ends, the lock released.
It doesn't make sense to call the uspReleaseAppLock to release the lock initialized in another session. If you try, you get the error like below, as I mentioned, the lock is session scoped.
"Cannot release the application lock (Database Principal: 'public', Resource: 'patient1') because it is not currently
held"
Regarding the same session ID you get from calling 2 SPs separately in Entity Framework(EF). As per my limitation knowledge on EF, If the maxsize of the project connection
pool equals 1, you may get the same session always.
Some cautions for sp_getApplock
Locks can be explicitly released with sp_releaseapplock. When an application calls sp_getapplock multiple times for the same lock resource, sp_releaseapplock must be called the same number of times to release the lock.
Due to the connection pool, the sessions may last long, that's what you need to take into account.
By the way, is there any reason that you have to use the sp_getApplock? What is the procedure doing that you cannot rely on SQL Servers build-in concurrency control mechanisms?
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Prerequisites : 2-node Solaris Cluster 4.1 using VirtualBox.

Hi,
I am going to try building a 2-node Solaris Cluster 4.1 using VirtualBox. I have downloaded Solaris 11.1 ISO. Can someone please help me with the right configuration for the 2 nodes/guests, particularly the NICs and shared storage?
Thanks,
Shankar

https://blogs.oracle.com/TF/entry/new_white_paper_practicing_solaris
it's a bit dated but should still get you there.

Should I be able to use a Lexmark Pro 205 wireless printer from my iPad 1? My iPad can't find the printer. Iveinstalled the Lexprint app on iPad and downloaded the Lexmark Listener on desktop computer. Still can't print from iPad.

Should I be able to use a Lexmark Pro 205 wireless 3 in 1 printer with iPad 1? I have installed the LexPrint app on iPad, downloaded the Lexmark Listener on desktop computer but still can't print from iPad. My iPad cannot find the printer. But I can print from desktop without USB cable. I upgraded the system on my iPad sometime ago. Suggestions??

Here is the list of AirPrint printers, and you particular printer is not on it. So that means you will need to use the Lexmark app, and print through your computer.
There is a Lexmark guy that hangs around these forums who may chime in with a response as well.
http://support.apple.com/kb/ht4356

Should my wife and I use the same Apple account or separate accounts?

Should my wife and I use the same account or our own accounts?
We each have our own iPhones and we share one iPad.
We have one computer where we use iTunes (our main desktop at home).
On iTunes on our computer, sometimes we are logged into my wife's iTunes account and sometimes we are logged into mine.
My iPhone was set up with my account and my wife’s was set up with her account.
My wife's iPad is set up with her account (but it seems like it is pretty easy to log out and then log in with my account if I want, I think).
Since we log into our respective accounts on iTunes and have our own accounts for our iOS devices, we purchase music, games, etc. on both accounts.
If we continue with our current method of different accounts, I am worried that our music, games etc. will be separated so that we won't be able to access them all from each of our devices. For example, I'm thinking of setting up that Home Sharing thing where you can use your iOS device to stream off your computer's iTunes but I think it only streams off the iTunes account you are currently signed into.
Is this a good idea or should we just pick one of our accounts and use it exclusively?
If we just use one account, should our phones both be signed in / started up with that one account?
Thanks for any info.

2 iphones, 1 ipad, 1 PC with 1 apple account

HT4436 Should my wife and I use the same apple id and icloud account? We have seperate iphones and share an ipad and our itunes are on 1 pc desktop??

Should my wife and I use the same apple id and icloud account? We have seperate iphones and share an ipad and our itunes are on 1 pc desktop??

2 iphones, 1 ipad, 1 PC with 1 apple account

Should I be able to use my Vision:M when it's docked/connected via U

I recently got a Vision:M, and when I was initially charging it using the included USB cable, it worked fine. Once I installed the software and transferred files,it stopped reacting to any key presses while connected to USB. It will receive files, but that's it (obviously, that's the main point of the USB connection - no complaints there).
My biggest concern is that while it is in this state, the image of the arrows around the USB icon in the middle of the screen stays on the whole time, but the arrows aren't moving as when a transfer is happening. The screen does dim, but I'm worried that over time, even if I only connect the device just long enough to charge it, that the image will become burned into the screen and ruin it. And I know there will be times I'll connect it to charge and forget about it for much longer, thus raising the risk of burn-in...or is burn-in not an issue with LCD?
At any rate, is this the expected behavior, or should I be able to use the VisionM when it's connected and/or should that image be visible when charging?
Thanks!

buring only happens with plasma not lcd. also thats weird.

Error release purchase order using transaction code me29n

i have warning error this purchasing document number cannot be released.
while i enter me29n t code.why?
then how to release purchase order using me29n t code?
can anyone answer this two questions.

hi
i have warning error this purchasing document number cannot be released. while i enter me29n t code.why?
is the release strategy is triggred for the po ?? check thisin P order in me23n ,in header level check release strategy tab ,
then how to release purchase order using me29n t code? can anyone answer this two questions.
just go to me29n >release strategy tab here just click on the release button in front of the release code

XML Schema Collection (SQL Server 2012): Complex Schema Collection with Attribute - Should xs or xsd be used in the coding?

Hi all,
I just got a copy of the book "Pro SQL Server 2008 XML" written by Michael Coles (published by Apress) and try to learn the XML Schema Collection in my SQL Server 2012 Management Studio (SSMS2012). I studied Chapter 4 XML Collection of the book
and executed the following code of Listing 4-8 Complex Schema with Attribute:
-- Pro SQL Server 2008 XML by Michael Coles (Apress)
-- Listing04-08.sql Complex XML Schema with Attribute
-- shcColes04-08.sql saved in C:\\Documents\XML_SQL_Server2008_code_Coles_Apress
-- 6 April 2015 8:00 PM
CREATE XML SCHEMA COLLECTION dbo.ComplexTestSchemaCollection_attribute
AS
N'<?xml version="1.0"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="item">
<xs:complexType>
<xs:sequence>
<xs:element name="name" />
<xs:element name="color" />
<xs:group ref="id-price" />
<xs:group ref="size-group" />
</xs:sequence>
<xs:attribute name="id" />
<xs:attribute name="number" />
</xs:complexType>
</xs:element>
<xs:group name="id-price">
<xs:choice>
<xs:element name="list-price" />
<xs:element name="standard-cost" />
</xs:choice>
</xs:group>
<xs:group name="size-group">
<xs:sequence>
<xs:element name="size" />
<xs:element name="unit-of-measure" />
</xs:sequence>
</xs:group>
</xs:schema>';
GO
DECLARE @x XML (dbo.ComplexTestSchemaCollection_attribute);
SET @x = N'<?xml version="1.0"?>
<item id="749" number="BK-R93R-62">
<name>Road-150 Red, 62</name>
<color>Red</color>
<list-price>3578.27</list-price>
<size>62</size>
<unit-of-measure>CM</unit-of-measure>
</item>';
SELECT @x;
GO
DROP XML SCHEMA COLLECTION dbo.ComplexTestSchemaCollection_attribute;
It worked nicely. But, I just found out the coding that was downloaded from the website of Apress and I just executed was different from the coding of Listing 4-8 listed in the book: all the <xs: ....> and </xs: ..> in my SSMS2012 are
listed as <xsd:...> and </xsd:...> respectively in the book!!?? The same thing happens in the Listing 4-3 Simple XML Schema, Listing 4-5 XML Schema and Valid XML Document with Comple Type Definition, Listion 4-6 XML Schema and XML
Document Document with Complex Type Using <sequence> and <choice>, and Listing 4-7 Complex XML Schema and XML Document with Model Group Definition (I executed last week) too. I wonder: should xs or xsd be used in the XML
Schema Collection of SSMS2012? Please kindly help, clarify this matter and explain the diffirence of using xs and xsd for me.
Thanks in advance,
Scott Chang

Hi Scott,
Using xs or xsd depends on how you declare the namespace prefix.
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="item">
I've posted a very good link in your last question, just in case you might have missed it, please see the below link.
Understanding XML Namespaces
In an XML document we use a namespace prefix to qualify the local names of both elements and attributes . A prefix is really just an abbreviation for the namespace identifier (URI), which is typically quite long. The prefix is first mapped to a namespace
identifier through a namespace declaration. The syntax for a namespace declaration is:
xmlns:<prefix>='<namespace identifier>'
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

How to Install oracle 11G Solaris 10 NO GUI using command line

Hello
I need to install oracle 11G R2 on Solaris 10 but cant use interactive mode i tried the following
/runInstaller -silent -force -debug FROM_LOCATION="/var/tmp/oracle/database/stageproducts.xml" ORACLE_HOME="/oracle/product"
As per oracle metalink documentation - however i get the following messages
[SEVERE] - My Oracle Support Username/Email Address Not Specified
has anyone installed oracle with no interactive mode how can i do so ?
thank you

Have you followed the needed steps in the Install Guide ? http://download.oracle.com/docs/cd/E11882_01/install.112/e17163/app_nonint.htm#BABFEECI
HTH
Srini

HT201365 My iPad is locked and has this message "this iPad hasn't been backed up. Backups happen when this iPad is plugged in, locked, and connected to wi fi". What should I do to continue using it please?

My iPad is locked and has this message "this iPad hasn't been backed up. Backups happen when this iPad is plugged in, locked, and connected to wi fi". What should I do to continue using it please?

Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

Error when releasing the WS using the transaction WSCONFIG

Hello Colleagues,
Following error message is recieved when i try to release the webservice using the transaction WSCONFIG.
Error when creating Web service (Method call of IF_SRT_REGISTRY_ENTRY~CREATE_NEW failed; the class does not exist)
Can you please let me know if anyone of you have faced the similar error and have been successful in solving.
Thanks & Best regards,
Ajay

Hi Ajay,
Check if the thread below resolves your issue:
[Re: web service - How activate host ?;
Regards, Trevor

Should Solaris release 2 be used? (6isolaris2.tar)

Similar Messages

Maybe you are looking for