Should The Cluster server have a diff. listening port.

          Hello,
          I have 2 managed servers and the main admin server, which routes the requests
          to one of the 2 Managed Server instances on the round-robin algo... Should the
          Admin server's have a diff. listening port like(7001 as per default) to that of
          the 2 Managed servers which r listening on 7005, why is this needed, is there
          a major advantage on doing this... Plz clarify... and can we call the Managed
          servers as Cluster instances...
          Thanx in Advance
          

You can run admin & managed servers on the same port number.
          and yes you can call managed servers which are part of cluster called as
          clustered instances/nodes etc...
          Kumar
          VenkatRahul wrote:
          > Hello,
          >
          > I have 2 managed servers and the main admin server, which routes the requests
          > to one of the 2 Managed Server instances on the round-robin algo... Should the
          > Admin server's have a diff. listening port like(7001 as per default) to that of
          > the 2 Managed servers which r listening on 7005, why is this needed, is there
          > a major advantage on doing this... Plz clarify... and can we call the Managed
          > servers as Cluster instances...
          >
          > Thanx in Advance
          >
          

Similar Messages

  • The cluster server element 441305751 is not added in the EP cluster context

    Hello Experts,
    We are using load balancer to distribute the load across of our four portal servers nodes. Lately, two of our nodes are behavior very strangely; it continuously stopped working momentarily and it started back up again automatically by it self. And the users usually received a message u201C500 internal server erroru201D.
    #1.5 #001372559B8800280000000200002D940004692BC78C988A#1241536659228#com.sap.engine.services.prtbridge##com.sap.engine.services.prtbridge####n/a##defe75c0398711debfb1001372559b88#SAPEngine_System_Thread[impl:5]_55##0#0#Error#1#/System/Server#Plain###
    The cluster server element 441305751 is not added in the EP cluster context,
       because prtbridge on 441305751 is stopped  or not yet started (maybe the server is starting or shuting down).
    Any helps would be appreciated,
    davidn

    HI David,
    Did you figure out why it happened? we have same exact problem and same log was written, could you please share your solution.
    Thanks

  • Can test the cluster server without web server present?

              Dear all
              I've a two UNIX servers installing with weblogic server. Can I
              test the cluster server without other web servers (e.g. IIS or
              Apache) presents?
              Thanks,
              chris
              

    You can also test without a web server of any kind. Use the "combined tier"
              described in the WL clustering docs. To distribute your clients across the
              two servers, you probably will want to configure your DNS to hit both
              servers when an address that you assign to the cluster is used (it will
              round-robin).
              "Joe E. Schwarz" <[email protected]> wrote in message
              news:3aa6048f$[email protected]..
              Hi Chris,
              YES, WLS is itself a web server. For details:
              WLS510: http://www.weblogic.com/docs51/cluster/setup.html
              WLS600: http://e-docs.bea.com/wls/docs60/cluster/setup.html
              Joe
              "chris lee" <[email protected]> wrote:
              >
              >Dear all
              >I've a two UNIX servers installing with weblogic server.
              >Can I
              >test the cluster server without other web servers (e.g.
              >IIS or
              >
              >Apache) presents?
              >
              >Thanks,
              >chris
              >
              

  • What Should the template form have ?

    What Should the template form have ?
    Object Library ; which has the most common used inherited triggers ?
    and ???
    Regards,
    Abdetu...

    If you look at the form of the standard object library (OFGWEBOL.fmb) you will see that there is no code (except for a few program units). The OL is really meant for look and feel kind of stuff.
    Also, it is far easier to maintain code in a pll library.

  • Where should the print server be?

    Hello all!
    Right now we have a cluster with two nodes for SAP (Node1: SAP & SAP PRD / Node2: Database) and all printers are installed on a different standard file server. Last week we realized that the file server is not the right place for SAP printer. If someone restarts the file server he unwillingly stops all SAP printing jobs. So we have two options now:
    a) reconfigure the file server as a cluster with two nodes to get high-availability
    b) put the printers on one of the SAP cluster nodes
    Our system partner said we shouldn´t install the printers on the SAP system, it could slow it down too much. But I don´t think they thought about the two nodes. Would there be enough performance on one of the nodes. Maybe the printers could run on the database node or on the apllication node. How do you use printers and their queues? Or is
    c) a dedicated print-server (as a two-node cluster)
    a better idea? Thanks for any ideas

    Hi Peter,
    You have not given much info so I will have to make some assumptions
    For printing, SAP firsts stores the data in the database via the spool work process then sends it off depending on the configuration of the printer access method. For local printing the data is then passed on to the spooler of your operating system where it is queued on the file system.
    If you attach a printer directly to your database or dialog(application) instance(in SAP we call them instances not nodes then that means the management of your prints would also reside on the same system which is probably not a good idea especially if you start having problems with the printer. Also, you would be adding additional IO(through transferring data to file system spooler) and storage to the system which you probably could do without. Additional processing would also be required for managing the queued data. So yes, your supplier is correct in this case especially if your print jobs are large ones at times.
    Personally, I would go for your final option c) but a) should also do fine.
    Regards,
    Nelis

  • All web sessions (Java) getting started on the cluster server

    We have a clustered environment and are using Web Analyzer to access our BI system.  I just recently discovered, however, that all of the web sessions are running on the clustered server, which should not be happening.
    We use a virtual name when accessing the Web Analyzer URL (because of the clustered environment) but the same thing happens when I use the actual physical name of the primary server (taking out DNS as a possible cause of the problem).
    So, my question is, what dictates where the web session gets launched?  When looking in AL08 I see all of the web sessions running on our clustered server and their terminal name is the name of the primary server.  Conversely, all SAP GUI sessions are running on the primary server, so I know this is just an issue with web/http related sessions. 
    I thought there might be a java attribute that dictated which server where these sessions got started (such as in the dispatcher config) but I can't find anything, plus I know it's not a load-balancing issue because the web sessions never start on the primary server.
    Thanks for any insight
    Ross

    We have two separate instances each running on their own physical server.  Thus, it is possible to go to the java port of each individual server;  ie. http://server1:port or http://server2:port.  The cluster is setup such that either server could go down and the remaining server will keep working.
    When I use the virtual server name (which resolves to server1) in the URL, the http session actually always gets sent to server2 with server1 as the terminal name (when looking in sm04 or al08).
    1) Clients goes to http://<virtual server name>:port
    2) Virtual server name is resolved to server1
    3) Server1 receives http request and sends to server2
    4) Http session is started on server2 with terminal name of server1
    The same thing happens if I use server1 or server2 in the URL as well -- the session always gets sent to server2.  I know I do not have a good enough knowledge of how the j2ee dispatcher works - I'm assuming this is the problem.
    Thanks again

  • IPhone 4s upgraded to iOS7 and I´m able to enter a new caldav calendar but I can´t find the calendar anywhere and the schedules are not in the calendar. The caldav server have been working on the iOS 6.1.3 efore very well! Any suggestions?

    Hello,
    I tried to enter a caldav calendar to my iPhone 4s.
    The same server and the same calendar have been working well tihin iOS 6.1.7.
    But now on iOS 7 the caldav server and account is confirmed but don´t appear in the calendar so the schedules are also not shown in the calendar app.
    Can anyone confirm that or has some suggestions?
    Thanks!
    Chris

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • When you publish a webpart what should the debugging server be set to?

    Hi,
    I am trying to deploy a webpart in Visual Studio.
    First of all, it says which local site do you want to use for debugging? Should this be a SharePoint server on your local machine that you are using VS on which will be different from the remote server you deploy to? On my local pc there are 3 web sites
    - SharePoint - 80, SharePoint Central Administration v4 and SharePoint Web Services. Which one should it be?
    And if this is what you need to do then, when it comes to deploying the webpart, how does VS know where to deploy it to? Because the server will be elsewhere. Also should it be deployed to the app or web server?
    Thanks a lot.

    Hi,
    It is required to do the web part development in the machine with SharePoint Server installed cause we will need to use the SharePoint Object Model in our development,
    so please choose a site(you can use the “SharePoint - 80”) in the local server for “What local site do you want to use for debugging” option and the web part solution can be deployed to this site during our development.
    Here is a link about
    Create Visual Web Parts in SharePoint 2010:
    http://msdn.microsoft.com/en-us/library/ff597539(v=office.14).aspx
    If you want to publish it to other servers, there will be a solution package(.wsp) generated after we publish our solution, we can upload install this solution package
    to a specific server as you want.
    Deploy solution packages (SharePoint Server 2010)
    http://technet.microsoft.com/en-us/library/cc262995(v=office.14).aspx
    Best regards
    Patrick Liang
    TechNet Community Support

  • What Roles should the gwconnector user have in CRM

    Hi Guys,
    I have setup GWConnector etc and have assigned GWConnector user with full admin rights on the CRM system.
    I cannot find any document that tells me what roles this user must have etc?
    Could one of you guys either tell me what they should be - or point me to the right documentation as itu2019s not in the groupware setup guide only the AD stuff?
    Thanks

    Honeslty, that is up to you.  I have customers that start off WLC and AP all in the same subnet, but it is not necessary.  I also have customers that put the WLC mgmt in the 'server' VLAN, and the AP in their own.
    IMHO, I like the WLC to be in 'server' or 'secured' VLAN, then I put the AP in their own VLAN that is locked down to only getting DHCP and talking to the WLC.  that way if someone unplugs an AP and connects something they can't get anywhere.
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

  • How often should the SMP server get restarted? Cockpit message "Restart Required!"

    How often should I restart the SAP Mobile Platform server? I have received a message in the SMP Management Cockpit that states "Restart Required!".

    Hi Darrel,
    Batish is right there is no need to restart server unless you change specific settings that need a restart. Ex. cache settings. You can find an "i" symbol next to these fields which need a restart if you change these values.
    Also server restart is needed if you change any config files ex. admin-role-mapping.xml.
    Are you able to reproduce this issue. Could you give a screen shot of this issue. What is the version of server?
    Regards, Midhun
    SAP Technology RIG

  • Not able to get the error code when the client ,server running in Diff JVM

    Hi ,
    My server code is running on websphere App server . My client is running on different JVM on my machine .
    When I try to throw my own exception , I am not getting any data in the exception object.
    I am setting error code and msg in the exception object.
    But when i retrive from my client , it is returning the null.
    Can some one throw some info regrading this .

    Hi,
    Did this issue occur on all clients?
    Please run ipconfig /all command on this problematic computer, and then post the screenshot here.
    In addition, update your network adapter, disable the firewall and anti-virus temporarily and then run these commands:
    netsh winsock reset catalog
    netsh int ip reset
    Meanwhile, please refer to this article to troubleshoot:
    DHCP Clients Are Unable to Get IP Addresses from a DHCP Server
    http://support.microsoft.com/kb/197197/EN-US
    Karen Hu
    TechNet Community Support

  • I CAN NO LONGER SYNC ANY OF MY APPLE PRODUCTS, WHEN I ATTACH THE I-PAD TO THE COMPUTER VIA USB IT DOES NOT TRY TO CONNECT TO THE PRODUCT,  I HAVE CHANGED CORDS, USB PORTS LOCATIONS, RE-INSTALLED I-TUNES.  THIS STARTED AFTER MORE RAM WAS ADDED

    I CAN NO LONGER SYNC ANY OF MY APPLE PRODUCTS TO I=TUNES, I HAVE CHANGED CORDS, CHANGED USB LOCATIONS, TRIED DIFFERENT ((I-PAD, I-PHONE) AND NONE WILL TRY TO SYNC.  I HAVE RE-INSTALLED I-TUNES. NOTHING WORKS.  THIS STARTED WHEN RAM WAS ADDED TO COMPUTER.

    Hi, can you take the RAM out and try again?  Sounds strange that RAM would cause this.
    What computer type are you using and what OS?

  • Newbie cluster question: where does the admin server live?

    Hello, I'm looking at clustering for our application where I work, and so I'm reading through the cluster-related documentation for 11g. I have a sort of an architecture question: where should the admin server be started? Hypothetically speaking, if you have two nodes for your cluster, would the AdminServer run on a 3rd box which sort of stood in front of the two nodes?
    Thanks much -

    The ideal situation would be for your admin server to be separate from the machines hosting your managed server. This allows you to control access to the admin server, eliminate the performance impact if you have the admin + managed on the same host, and limits impact if youir #1 host fails, etc.
    But companies may be unwilling to invest in a distinct (3rd) host just for the admin server, especially if you have multiple environments ( prod, testing, dev, etc. ).
    So usually the admin winds up sharing the host with a managed server.

  • Does the cluster have a log file?

              I understand each server in a cluster has a log file, but does the cluster itself have a log file?
              

              I dont think there is one for cluster...
              "Jake Kroto" <[email protected]> wrote:
              >
              >I understand each server in a cluster has a log file, but does the cluster itself have a log file?
              

  • Probloms in starting the web server

    i am a peoplesoft dba. i am trying to install peoplesoft internet architecture.
    the O.S is windows 2000, database is oracle, application server is using Tuxedo
    6.5. the web server is weblogic 6.12. i have installed all the components and
    am able to log on to the peoplesoft application in 3-tier mode.
    now i am trying to set-up the 3-tier web connection. i have created a domain -
    VISTDEV. the JSL port is 9000, HTTP port is 80. when i am starting the PIA service
    through --- startPIA.cmd under my domain, i am getting the following error:
    <Dec 26, 2003 12:24:19 PM CET> <Notice> <Management> <Loading configuration file
    .\config\VISTDEV\config.xml ...>
    <Dec 26, 2003 12:24:25 PM CET> <Notice> <WebLogicServer> <Starting WebLogic Admin
    Server "PIA" for domain "VISTDEV">
    <Dec 26, 2003 12:24:44 PM CET> <Notice> <Management> <Application Poller not started
    for production server.>
    <Dec 26, 2003 12:24:44 PM CET> <Notice> <WebLogicServer> <ListenThread listening
    on port 8080>
    <Dec 26, 2003 12:24:44 PM CET> <Emergency> <WebLogicServer> <Unable to create
    a server socket for port: 443. java.net.BindException: Address in use: JVM_Bind
    Perhaps another process is using port 443.>
    <Dec 26, 2003 12:24:44 PM CET> <Emergency> <WebLogicServer> <The WebLogic Server
    is no longer listening for connections. You should probably restart it.>
    <Dec 26, 2003 12:24:44 PM CET> <Alert> <WebLogicServer> <Server shutdown has been
    requested by system>
    <Dec 26, 2003 12:24:44 PM CET> <Alert> <WebLogicServer> <The shutdown sequence
    has been initiated.>
    the DOS window closes after that. i am surprised how the port 8080 is coming into
    picture.
    can you please help in troubleshooting.

    Hi,
    I suppose you have set the SSL port to 443 however, it looks like port 443 is
    already in use by another process.
    Regards
    Mayur
    "blue_jay" <[email protected]> wrote:
    >
    i am a peoplesoft dba. i am trying to install peoplesoft internet architecture.
    the O.S is windows 2000, database is oracle, application server is using
    Tuxedo
    6.5. the web server is weblogic 6.12. i have installed all the components
    and
    am able to log on to the peoplesoft application in 3-tier mode.
    now i am trying to set-up the 3-tier web connection. i have created a
    domain -
    VISTDEV. the JSL port is 9000, HTTP port is 80. when i am starting the
    PIA service
    through --- startPIA.cmd under my domain, i am getting the following
    error:
    <Dec 26, 2003 12:24:19 PM CET> <Notice> <Management> <Loading configuration
    file
    \config\VISTDEV\config.xml ...>
    <Dec 26, 2003 12:24:25 PM CET> <Notice> <WebLogicServer> <Starting WebLogic
    Admin
    Server "PIA" for domain "VISTDEV">
    <Dec 26, 2003 12:24:44 PM CET> <Notice> <Management> <Application Poller
    not started
    for production server.>
    <Dec 26, 2003 12:24:44 PM CET> <Notice> <WebLogicServer> <ListenThread
    listening
    on port 8080>
    <Dec 26, 2003 12:24:44 PM CET> <Emergency> <WebLogicServer> <Unable to
    create
    a server socket for port: 443. java.net.BindException: Address in use:
    JVM_Bind
    Perhaps another process is using port 443.>
    <Dec 26, 2003 12:24:44 PM CET> <Emergency> <WebLogicServer> <The WebLogic
    Server
    is no longer listening for connections. You should probably restart it.>
    <Dec 26, 2003 12:24:44 PM CET> <Alert> <WebLogicServer> <Server shutdown
    has been
    requested by system>
    <Dec 26, 2003 12:24:44 PM CET> <Alert> <WebLogicServer> <The shutdown
    sequence
    has been initiated.>
    the DOS window closes after that. i am surprised how the port 8080 is
    coming into
    picture.
    can you please help in troubleshooting.

Maybe you are looking for