Should the opening of a case for the iphone 4s be big to allow more light in or it does not make a difference?

I got an otterbox case for the iphone 4. It is a universal case. The opening for the camera is small I was wondering if this would affect the quality of the pictures. Please advise.
Thank you!!

Try resetting the phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.
Then, launch iTunes & connect your phone...what happens?

Similar Messages

Transaction to see the Open stock transfer order for the plant

HI ,
i need to develop one report in that client to make the report for the all open stock transfer order & the cost of the open stock transfer order for the plant .
I need how to cretae the stock transfer order for the material , whci material master is required for this process.
please give me step by step details for this .
regards
satish
Edited by: satish kapartiwar on Jul 16, 2009 9:33 AM

Hi Satish,
You can see open stock transfer quantity in MB5T and stock value in MB5L. If you want to make stock transfer, there is two types intra company transfer(with in same company code) and inter company transfer (different company codes).
Steps for Intra company stock transfer:
This is only within the comp.code(w/o SD)
(w/o SD) 351101 MvT. and (with SD) 641101
1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.
Create customer (xd01) & and define the shipping data for plants in both the plants.
Path: spro u2013 img u2013 material mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data
(1 by1 )
In Receiving plant (1100)
Customer num. 123345 (for ex.)
Sales org. yyy
Dist. Channel yy
Sales div. y
In Supplying plant (1000)
Customer num. -
(don't fill)
Sales org. yyy
Dist. Channel yy
Sales div. y
5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
Position doc type is "UB"
Enter supplying plant(1000) & doc type (NL)&checking rule (ex:01)
6.Assign doc. Type is "UB" to u'r plants.(PO)
Go for new entries
Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
7. Create a PO, choose the doc type is 'UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov.type 101.
11. See the stock overview in the receiving & supplying plants.
Steps for Inter company Transfer:
1) Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure, In Customer Master, sales Area Tab: you are maintaining shipping condition)
2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
4)then For your supplying Plant and receiving Plant assign Document type NB
5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group, Shipping Condition and Supplying plant combination, Assign shipping point
these are the configuration settings you have to do in background.
Then Create STO from Receiving Plant in ME21N with document type NB.
Based on that STO, Create Delivery in VL10B from supplying Plant
Do PGI in VL02N from Supplying plant
Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
Regards,
Prasath

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

Let me see if I can help you with the basic WDS configuration steps:
Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
802.11g AirPort Extreme Base Station (AEBS) Configuration
AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network
Manual Setup > WDS tab
WDS Mode: WDS main
Allow wireless clients (checked)
WDS Remotes: <enter the AppleID for the AXn here>
Click on Update and allow the base station to restart.
802.11n AirPort Express Base Station (AXn) Configuration
AirPort Utility > Select the AXn > Manual Setup > Wireless tab
Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
Manual Setup > WDS tab
WDS Mode: WDS remote
Allow wireless clients (checked)
WDS Main: <enter the AppleID for the AEBS here>
Click on Update and allow the base station to restart.

I am not able to share a blogpost image on facebook using the open graph meta-tag for the blogpost image.

Dear Members,
I am wrestling a few days now, and still not able to get a blogpost image into the facebook share-box.
This is the link where i am talking about:
Top 10 Celebrities on Holiday in Saint Tropez
I have 2 issues:
1
Below ( under the blog-post ) you'll find my facebook like button.
When i like the blog-post, the share-box pops up BUT without the blog image.
I put the link in the debugger window from Facebook, but it tells me that the open graph tag for a image is not proper defined.
this is the link to facebook debugger : https://developers.facebook.com/tools/debug/
So i created this meta-tag : <meta property="og:image" content="/_assets/images/blog/img-{tag_blogpostid}.jpg" />
and put it inside the head of the html code for the detailed blog post lay-out ( site-manager/module-templates/Blog lay-outs/Blog post detail lay-out )
2
I dont know how i must specify the URL to be liked on facebook.
My blog-list url = http://www.duvanduvan.com/blog BUT i have to specify the url for a single blogpost item, but have no idea what to specify. i tried different url's like : duvanduvan.com/blog/{tag_itemurl} etc.... with no result
Can you also help me out here?
I really tried everything i possibly know off but without result :-(
Can somebody help me out here?
Much much appreciated.
Stefan.

try selecting music from the top bar check the songs you want, then sync

Can anyone recommend the best type of case for the...

as its a touch screen i think its a must

Hold one, finding it again but you can also look for the: Nokia CP-323.
Just tried the link and it is dead. Weird. It is a Nokia site....
This is weird. Nokia can not navigate within their own site. Pitiful..... Anyway do a search for the case. It is there.
Message Edited by sapporobaby on 20-Jul-2009 11:44 PM
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

How can one use one specific security realm per application ? The realm-name attribute of the login-config tag of web.xml does not make any difference

Hi,
I have different sets of users coming from different databases and using different
roles mapping for each of my web applications. I would like to configure a specific
security realm per application in my weblogic server 7.0 . Is it possible ?
I try to specify the realm-name of the login-config tag from the web-xml deployement
descriptor but it doesn't make any difference. The default realm is always used.
I also would like to tell the Weblogic server to use the default realm in case
the realm isn't specified or isn't found. For example, the default would contains
my admin users.
Thanks a lot for your answer.
Iz

I thik this is a common mistake the ralm-name tag in the deployment descriptor is used
just by the browser for display purposes (when it opens the basic auth dialog box) so as
of now there is only 1 active realm which can have multiple providers as Kevin pointed
out
Kevin Lewis wrote:
WebLogic 7 now ignores the realm-name tag (I found that out yesterday).
My understanding is that there is only one realm active at a time for a domain
(I would be interested in being contradicted in this).
However, you can have multiple providers in each category of a realm: authentication,
authorization, etc. Therefore, what you can do is key authentication, et al,
off of some other information. We have our users enter their company, for example,
and use the TextInputCallback to get it. You could also encode something in the
initial page, based on the URL they hit, or whatever, and get that back in your
callback.
You can store that information in your own Principal implementation, and key off
of that in your authorization provider, going to a different database as appropriate,
or abstaining when a specific provider doesn’t have anything to say about a subject.
Anyway, there should be a way to do it, even if it's more complex than you would
have hoped.
--Kevin

HT4515 Just tried to place a call on my new iPhone5S. I can hear the person I'm calling, they cannot hear me. The microphone icon has a line through it, but tapping the icon does not make a difference.

Just tried to place a call with my new iPhone. I can hear the person I'm calling but they cannot hear me. There is a line across the microphone icon, which I took to mean muted but nothing changes when I tap it. What am I doing - or not doing?

is your mute switch turned on (above the volume) ? remove case and screen protecter.
is volume turned up?
if so do this
account security
Please call apple @ 1-800-692-7753 in USA
ask for the account security team
you may want to add a credit card to your iTunes account before calling; so they will have a way to verify your identity.
Peace, Clyde
check # for your country
http://support.apple.com/kb/HE57
<Edited by Host>

What is the best full protection case for the iphone 4/s

Can you guys tell me ASAP what is the best full protection iphone 4s case around, i want an all around protection case like lifeproof, i have hesard they are bad cases is that true.

Is it that easy to restore the iphone even if I have a pin?
I think it's a shame with all the tecnology with have we can't some how stop the phone from working if it ever gets stolen.
I think the best route to go down is to get it insured
Thanks for you help

What is the best carrying sleeve/case for the Macbook Pro 15"

I just bought a Macbook Pro, an upgrade from my iBook G4, and need to get a sleeve. I definitely want something that has hard edges that will fit in my messenger bag, as I ride the bus and my bag sits on the floor of the bus when it is full. What are peoples recommendations? I was looking at the Booq Viper M2, but would welcome suggestions.
Thanks,
Ian

Speck makes a great SeeThru hard shell cover.
I picked up two on eBay real reasonable.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
YouTube.MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 
Note: I receive no compensation for product endorsements.

Anyone buy the new Air Jacket case for the touch?

Just wondering how you liked it. Im considering purchasing one....

I'd never had to reapply it after initial application, but I would just assume it would reapply with no problems. Don't quote me.
As far as installing it without bubbles, don't worry. When you put it on, you use a squeegie that comes in the box to lay down the screen and it gets rid of almost all bubbles. A few bubbles stay but they work themselves out after a couple days. The website told me small bubbles would work themselves out and I was skeptical, but like clockwork all of my bubbles are gone now a few days later.

Font size is too small in flash applications and the "zoom" feature does not make any difference. Thanks

Zoom dosen't work in flash applications and it is crazy small and too hard to read...this does beat out the fact you can't right click using flash in google chrome...I prefer firefox, but will go back to IE if it is the only program without such major bugs
I have also reset the minimum text size in flash and that did not help the problem at all.

Zoom dosen't work in flash applications and it is crazy small and too hard to read...this does beat out the fact you can't right click using flash in google chrome...I prefer firefox, but will go back to IE if it is the only program without such major bugs
I have also reset the minimum text size in flash and that did not help the problem at all.

Protective cover/case for the MuVo TX

Does Creative make like a hard cover/case for the MuVo TX FM? Not the little plastic sleeve that come with it either. Like a complete covering case.

Check the shop on this website, they should have a protecti've case for the MuVo TX FM although i'm not sure if they make hard cover cases, they should.

When does the new hard case for the 5th gen Nano come out?

Does anyone know if there is/when there will be the clear plastic hard cases for the 5th generation nano???

You might want to ask this in the 5th gen nano forum.
http://discussions.apple.com/forum.jspa?forumID=1357
This is the iPod 5th gen (the one known as the iPod video) forum.

Firefox opens when I click on a hyperlink in an e-mail in my Outlook 2003 program, but does not go to the URL in the link. It used to work before I re-installed my MS XP Pro 64 bit OS. Help!

At first, after I re-installed the OS, nothing would happen when I clicked on an e-mail hyperlink. So I went to Folder Options in Control Panel and associated Firefox with the E-mail file type. Firefox then opened when I clicked on a hyperlink in an e-mail, but just opens to the Firefox start page ("Blank page"). Firefox does not open the URL in the hyperlink. I need guidance as to how to restore this function which worked perfectly before I had to re-install the OS due to a corrupted program installer. I have run the MS Office Detect and Repair function twice--both times indicating that everything is fine--but it does not make a difference in fixing the Firefox function.
NEW: An attempt to click on the link in Security Center to go to Microsoft Update brings up an error message that reads: "The requested lookup key was not found in any active activation context." I have no idea what this means, but I suspect it is related to the lack of ability to open Firefox to a link URL.
See the uploaded screen print(JPEG) below.
UPDATE: PROBLEM SOLVED!! Searched on error message on line, solution fixed problem. THANKS ANYWAY

# Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
# Sign back in, and you will be asked to save the password you entered.
# This will save the password and autocomplete if you have this option turned on.
I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

How to maintain open change request control for the transaction MM02 & CS02

hi all...
can any one please let me know that, is there any BADI or Enhancement spot
where i can code for my desired functionality...
how to maintain open change request control for the transaction MM02 and CS02.
Desired Functionality:
The user wants to maintain a material, bill of material or a document.
On the initial screen of the respective transaction (MM02, CS02)
user enters a change request number.
The system checks whether the object record that the user wants to maintain
is already assigned to other change request numbers.
If this is the case, the system displays a warning, stating that there are
other open change requests for this master data record.
In addition, the system lists the relevant change request numbers.
The user can continue the maintenance or leave the transaction and first check
the mentioned change requests.

hi satish thanks for reverting back
but sorry yaar given enhancement is not triggering...
but my requirement is:
- after executing the transaction MM02 & CS02.
- user inputs the data for Material Number and then he enters the Change Number.
- if the given Change Number is not maintained with the Material (i dont no
where/how this two fields are maintained internally), then it has to raise a
warning and it should list the existing Change Numbers for that perticular
Material.

Should the opening of a case for the iphone 4s be big to allow more light in or it does not make a difference?

Similar Messages

Maybe you are looking for