Should this work?

Gang,
- I'd like to replace our AEBS with a TC.
- Use the TC as our Wireless Router.
- Connect TC to our DSL modem.
- Connect our USB printer to TC.
- Use the TC as a back-up drive for my 10.5 MBP and my wife's 10.4 iBook G3.
Should this work?
-JnC

That will work fine, but don't get rid of your AEBS. If your MBP is 802.11n, then you can enjoy the speeds of the TC on your MBP without having to select a b/g network so the iBook can play (which is what you'll have to do otherwise). Simply Connect the DSL modem to your TC WAN port via ethernet cable, then connect TC to your AEBS with another ethernet cable. Create one network name for the TC network (which your MBP will join), and a separate wireless network from the AEBS for the iBook. Make sure you're using bridge mode in your Airport Utility so that the AEBS can share the DSL network connection with the TC.
Sounds complicated, but this allows you to fully enjoy the TC (and "recycle" your AEBS). Good luck.
Message was edited by: JasonMacGuy
Message was edited by: JasonMacGuy

Similar Messages

  • Help please. Extended display won't work on MBP and AOC 20" 1600 x 900  60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

    Help please. Extended display won't work on MBP and AOC 20" 1600 x 900  60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?

    I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
    I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
    Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys?

  • Sheduled rwrd rule. how should this work?

    Dear gurus!
    It's not clear for me how a sheduled rwrd rule should be set up and how it should behave.
    I created the rwrd rule group and the rwrd rule with "Standard (Timed) (Expert Mode)" type.
    the "regular" (not sheduled) rule statement is created to change the specified dynamic attribute which is assigned to the loyalty program. This works fine.
    Now.
    I chose "daily" frequency for the rule and created sheduled statement with the "edit sheduled rule" button. This statement targeted to reset the specified dynamic attribute if it is greater than 0.
    The rule behaviour is quite strange for me: at the specified time several "timed execution" activities for different memberships were created. Some of them were processed ok others were processed with Error: No eligible rwrd rules. BUT in all cases the dynamic attribute was not reset.
    Can somebody describe the right way to setup sheduled rwrd rules?
    Sincerely, Ivan.

    Seems to be solved with the SAP note
    1546755 - Timed Execution Member Activity not processed correctly

  • Problem with File.copy() -- should this work?

    I'm trying to copy a number of script files (I'm testing with just one) out of one folder into another. Here's the code:
    (function() {
      var myFolder = Folder(getScriptPath().parent + "/disabled");
      if (myFolder.exists) {
        var myScripts = myFolder.getFiles("*.jsx");
          for (var j = 0; myScripts.length > j; j++) {
          if (myScripts[j].copy("../enabled")) {
            myScripts[j].remove();
      function getScriptPath() {
        // This function returns the path to the active script, even when running ESTK
        try {
          return app.activeScript;
        } catch(e) {
          return File(e.fileName);
      } // end getScriptPath
    What's happening is that the file in the disabled folder is simply being deleted. This means that the copy method is returning true and yet the copy didn't happen. Perhaps my URI is wrong, but if so, the copy should have failed. The file is not in either the InDesign or ESTK packages, which seem to be the only two worth looking in -- I was running from ESTK with InDesign CS4 targeted.
    Dave

    You can set the current folder like this:
    Folder.current = "/d/test1/test2"
    Then change to that current folder's parent using
    Folder.current = ".."
    But you can't use .. in file masks. This won't work:
    var myFiles = Folder.cuttent.getFiles ("../*.jsx")
    The only way of using .. (as far as I can see) is with literal filenames:
    myFile = '../nonsense.txt'
    which points to nonsense.txt in current folder's parent folder. But this is unclear as you dont't have a reference to the current folder in your statement. I agree that using relative file paths is vague and it looks as if they're best avoided.
    Why copy() returns true when in fact it hasn't worked looks like a bug. I've tried it a couple of times and on Windows it gives the same results as with you: copy() says true when nothing's happened.
    Peter

  • Charging Cable ~ Should This Not Work?

    Like many other I have found that my car charging cable does not work with my iPhone 3G, but I thought I had a solution, which as it turns out did not work ~ but why?
    Previously when charging my other ipods in the car, I used a simple device which consisted of an adapter that went into the Cigar Lighter socket (Sorry Power Socket) which at the other end allowed a USB charging cable +(the same as the one used to charge via the computer USB port)+ to plug into it and the other into the iPod and then charge.
    This worked just great. So if the cable which came with the iPhone 3G (I know its the same as all other such cables, but I was playing safe) works fine when connected to the computer and iPhone 3G Dock, +why when that cable is connected to my iPhone 3G and plugged into the cars power socket, does it not charge,+ bearing in mind that this new set-up will charge the ipods just as it did with the other older USB cable?
    Can anyone enlighten me please or has anyone found a solution?

    The adapter you have for you car's power outlet is attempting to charge the iPhone via the firewire pins in the dock port on the phone. In the iPhone 3G charging via the firewire pins has been eliminated, it now only works via the USB pins. Most car adapters will use firewire because it can carry 12V which is what the car is already supplying so no step down is needed because USB only does 5V.

  • Was told a USB device would create a PDF automatically from the data contained within when plugged into my USB port. Doesn't seem to work. How does this work and how can I fix the device I received?

    Acrobat is not on the USB device - only Adobe Reader needed on the PC. How does this work? How can I fix this device if at all?

    You need to ask the people who sold it to you. Doesn't sound like it has anything to do with Reader.
    However, you should be wary of devices that automatically try to open files when plugged in. They can also infect your computers with all kinds of viruses or malware.

  • ITV no longer connects Home Share, and Netflix crashes mid movie. This worked on Christmas - day two flop

    I know... I searched the forum and this is a very hot topic. But I am not a techie and really don't want to reconfigure my iMac System energy preferences to tell the computer to 'never sleep' and to deselect the 'Put the hard disk(s) to sleep whenever possible.' - which was one support forum posters "fix".
    Why did this work Christmas day? I had already updated iTunes to 11.0.1 (12) before we opened and installed iTV. Upon initial setup of iTV we allowed the system to install an update. Everything was functional. We set it up up on our wifi, we created the passcode that iTV needed in settings. We used the AirPlay with iPad 3 and with an iPhone 4s; all very cool. I could access my iMac through iTV. No glitches. Everything worked as it should.
    Today we have had nothing but Netflix and that isn't working well. It crashed twice earlier in the day on a short documentary and tonight it happened again 30 minutes into a movie and we had to restart, fortunately it was near where it crashed so we only had to re-watch a few minutes of the movie.
    All day iTV has had the error message when you try and operate any Apple based function that 'Home Sharing needs to be turned on in iTunes...'  well, my iMac is always on (I know, some of you will cringe. I shut it down about once a month.) and we repeatedly checked iTunes throughout the day and Home Sharing is ON..... is this random performance what we have to look forward to?
    If it is some inefficiency in our wifi (another forum posters 'fix'), why was it not an issue on Christmas day? It can't work flawlessly one day and act like a demented PC the next. Come on APPLE. This is not what we expect of your products. iTV is not a new roll out. Bug fix? Software update? Ideas? Someone? Anyone?  Thanks...
    Apple TV  Model A1427      802.11n wi-Fi   HDMI    1080p

    I know... I searched the forum and this is a very hot topic. But I am not a techie and really don't want to reconfigure my iMac System energy preferences to tell the computer to 'never sleep' and to deselect the 'Put the hard disk(s) to sleep whenever possible.' - which was one support forum posters "fix".
    Why did this work Christmas day? I had already updated iTunes to 11.0.1 (12) before we opened and installed iTV. Upon initial setup of iTV we allowed the system to install an update. Everything was functional. We set it up up on our wifi, we created the passcode that iTV needed in settings. We used the AirPlay with iPad 3 and with an iPhone 4s; all very cool. I could access my iMac through iTV. No glitches. Everything worked as it should.
    Today we have had nothing but Netflix and that isn't working well. It crashed twice earlier in the day on a short documentary and tonight it happened again 30 minutes into a movie and we had to restart, fortunately it was near where it crashed so we only had to re-watch a few minutes of the movie.
    All day iTV has had the error message when you try and operate any Apple based function that 'Home Sharing needs to be turned on in iTunes...'  well, my iMac is always on (I know, some of you will cringe. I shut it down about once a month.) and we repeatedly checked iTunes throughout the day and Home Sharing is ON..... is this random performance what we have to look forward to?
    If it is some inefficiency in our wifi (another forum posters 'fix'), why was it not an issue on Christmas day? It can't work flawlessly one day and act like a demented PC the next. Come on APPLE. This is not what we expect of your products. iTV is not a new roll out. Bug fix? Software update? Ideas? Someone? Anyone?  Thanks...
    Apple TV  Model A1427      802.11n wi-Fi   HDMI    1080p

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

    Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
    I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
    Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
    Thanks, John Lee

    Looking at the Konica web site for the PagePro 1300W, I saw the following note.
    Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
    So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

  • OS X lion USB Thumb Drive - will this work on new Mac Mini or MBA (2011)?

    Hi All,
    Not to be confused with the other similar posts, I am interesting in only clarification of what build comes with the USB Thumb Drive now available on Apple Store - will this work with new MBA and Mac Mini?
    Thanks,

    KeanuReeves wrote:
    From what I have read about the usb installer, it is not intended for you to try booting from the stick after wiping your hard drive. You are to click on the installer
    You may be correct, but this statement is quite confusing in that context:
    Important Note
    When you install OS X Lion using the USB thumb drive, you will not be able to reinstall OS X Lion from Lion Recovery. You will need to use the USB thumb drive to reinstall OS X Lion.
    So, if the Thumb drive is supposed to take the part of the Recovery partition, it seems that it should be able to boot. However, the license agreement still requires an Apple computer running Snow Leopard, so maybe it isn't bootable.

  • User should only work on created Form

    Hi all!
    Here is my problem.
    A user is working in B1. For example:With a double_klick on a Textfield and a user created Form will be shown.
    No the User should only work with this Form until its closed! There should be no possibility to open an other form or so.
    Like if you get a MessageBox, there is no other "normal" way to work on until you close this Messagebox.
    May it is possible to let the Form act like such a Messagebox.
    Thanks for replies..
    Matthias

    The Sample you speak of show the hack/workaround (Not true modal functionality).
    From the sample:
        Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.ItemEvent
            ' Don't let the user to move to other forms
            Dim EventEnum As SAPbouiCOM.BoEventTypes
            EventEnum = pVal.EventType
            If bModal And FormUID <> "Modal" Then
                oForm.Select() ' Select the modal form
                BubbleEvent = False
            End If
            ' If the modal from is closed...
            If FormUID = "Modal" And (EventEnum = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE) And bModal Then
                bModal = False
            End If
        End Sub
    In the sample the bModal bool set to true when opening the form block all events by selecting the modal form on each event and setting bubbleevent to false.. the EventEnum = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE set the bModal to false so events can continue
    Biggest problem with this is if you use a eventfilter (which you should do)... here you need to remove the event filter along with setting the BModal (not in the sample), and reapply it after form close.
    <i>Kind Regards
    Rasmus Wulff Jensen | http://www.b1up.net</i>

  • Will this work to determine the system byte order?

    I need to be able to determine, preferably without relying on conditional disable symbols, whether the system on which a VI is run uses big-endian byte order.  What I came up with was to flatten a U32 containing 0xDDCCBBAA to string using the unknown system byte order, and unflatten using a big-endian byte order.  If the pre- and post-flattening U32's are equal, the system must be use big-endian byte order.  Two questions:
    1. Will this work?  It recognizes, correctly, that my PC does not use big-endian byte order, but I don't have any big-endian targets to test it out on (see #3).
    2. Is there a better way?  Perhaps something already built into LabVIEW?
    3. Would somebody with a big-endian target verify that my VI detects it as big-endian?
    Thanks,
    Mark Moss
    Attachments:
    Detect Big-Endian System.vi ‏8 KB

    You can simplify your VI a little.  Since you know what the result of the string flattening should be in big endian, just compare the string.
    Attachments:
    Detect Big-Endian System 2.vi ‏7 KB

  • HT3702 I reported a problem and I got a confirmation saying that my money was refund, I have't received anything yet. How does this work?

    I  reported a problem and I got a confirmation saying that my money was refund, I have't received anything yet. How does this work?

    It should be added either to your iTunes account, or possibly to your credit card if the purchase was made on with it.
    How long ago did you get the email ? It may take 48 hours for it to appear - if it's been longer than that and you can't see it on your iTunes balance (and you've tried logging out and back into the account to see if the balance updates) nor on your credit card then try contacting Support again, and include your case number if you have one.

  • HT4623 I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

    I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

    Also i forgot to add after a night of searching how to turn the Epson Workforce 435 printer into Airprint friendly and not iPrint (which are 2 completely different things) i donwloaded a program called (AirPrint Activator) from HandyPrint. The link is below to download the software. Once i installed the application i set my printer to be shared over my Home Network (Wi-Fi Network). Once you have done that, open the AirPrint Activator application you have just downloaded, swtich it ON from OFF mode, and then you should easily see your printer name in my case EPSON Workforce 435 and then just close the application. Then go to your IOS Device like your iphone/ipad/ipod touch select a picture that you want to test print or even an attached PDF from your email, and select Print in the share button. You will then be prompted to select your printer. Your printer you automatically be recongised then just select print. And now you have a complete AirPrint ready printer with a Printer that doesnt even support the function. Im sure you can do this to all Wireless Printers, even if they came out before Apple AirPrint service launch.
    And also if you still need guidance and a video to follow from just click the Youtube link below
    http://www.youtube.com/watch?v=9r75m_VUr0E
    Download AirPrint Activator Link
    http://netputing.com/handyprint/
    I hope that this helps your question and enjoy your day
    Kind Regards
    Ahmed

  • HT1476 i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won't recharge either via laptop (usually does) or wall switch. Just a blk screen.

    i-phone3 wont recharge; initially home button wouldn't work. Applied the 'auto-touch button thing' via settings. This worked until I ran out of battery life. Now it won’t recharge either via laptop (usually does) or wall switch. Just a blk screen.

    In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
    That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
    Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
    Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
    While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
    Hunt

Maybe you are looking for