Should user sessions be routed to Central Instance JVM in cluster?

Our production portal is clustered and we have eight JVMs.  Is it a problem if we route user requests to the central instance JVM in the portal or should this instance be left to provide services to the other JVMs in the cluster?

Hi Timothy,
    It is Ok to route traffic to the JVM on the central instance. Probably the main reason not to route traffic there is the possibility of a request taking down the central instance requiring (hopefully) a failover.  (worst case portal down)  My personal preference is if you have enough capacity on the other servers, don't route request to the central instance especially if you don't have a failover scenario for the central instance.  
What you may want to consider is not routing to the central instance but if you loose one of the other server nodes, have the load balance use the central instance for the failover till the node is restarted.   
Hope this helps,
John

Similar Messages

  • Error in installation of Central Instance in Windows Cluster with Oracle

    Hi!
    If I try to continue with the installation of Central Instance of Cluster I get the following error:
    The java load in database <sid>/<server> has already been configured. 
    Solution: remove the schema and load it with a new load before you run this installation
    Can some one tell me how to proceed?
    Thank you very much!
    Regards
    Thom

    Thom,
         Did you figure this one out?
    Thanks
    S.

  • Viewing Current Users/Sessions Logged onto CMS (Central Management Server)

    Post Author: Alanimal
    CA Forum: Data Integration
    Hi Guys,
    When you use the Central Management Console, click on HOME>SERVERS>CMS:(SERVERNAME) - Under the properties for the Central Management Console you can view who is actually logged into the CMS.
    How can I create a query in the Query builder that can show me the same data? I am trying to create a web page that will show me only the current logged in users.
    Is this possible?
    Cheers
    Alan

    OK There are a lot of errors in the Log file which relate to writing to the install path and as per below.
    Property(C): WiseInitAdminError = You must have administrator rights to run this installation. Please login as an administrator and re-run this installation.
    Property(C): WiseInitReboot = This system must reboot before the installation can begin. After the reboot the installation will restart automatically. Do you want to reboot this system?
    MSI (c) (7C:00) [13:49:00:317]: Note: 1: 1728
    MSI (c) (7C:00) [13:49:00:317]: Transforming table Error.
    MSI (c) (7C:00) [13:49:00:364]: Transforming table Error.
    I have tried installing as Local Administrator as well as a Domain aministrator
    Yes the Databse has been populated with tables during the install.
    We are reinstalling the OS to make sure it is WIN 2003 R2 sp2 64 Bit which is a supported platform. SQL 2005 is also SP2 64 bit

  • EP 7 HA : Is the JAVA Central Instance a SPOF ?

    Hello,
    We are planning on installing a SAP EP7 system in High Availability based on a HP Cluster.
    We haven't still defined which components will be installed on the cluster and which components will be installed outside the cluster.
    It is my undersatnding that only the SPOF should absolutely installed on the cluster :
    SCS (enqueue server + message server)
    DB instance
    I wanted to install the Java Central Instance outside the cluster , with the other additional application servers.
    This way it will allow us to perform some portal customizing such as SSO with SAML, directly on the CI + Application servers without making any changes in the cluster.
    But, we have been replied by SAP consulting that CI sould be installed on the cluster ,
    Here is the answer we got :
    CI on switchover cluster?
    There are two SPOFs on the CI that could be a reason to do so: the SDM and the Configtool. Both are located in the CI, and if the CI is not available the tools cannot be used. The requirement dependes on the SLA, and if configuration changes or deployments have to be performed in a downtime.
    Frankly, I'm quite skeptical about that. Do you have any experience with EP andHigh Availability ?
    Is it really necessary to install the CI JAVA on the cluster ?
    Thank you in advance for your attention and your help.
    Best Regards.

    Technically they're right, but in all HA envirpnments you need to trade off likelihood of problem vs cost. SDM and the configtool are only used in extreme cases - how many times do you have to change the JVM params or apply a patch, but you could also work around these by having another \JCxx\blah folder with the tools.

  • Preventing Eportal HTTP Plugin sessions going to Central INstance.

    Dear all,
    We are running with BW 3.5 with 4 applications including Central Instance, an eportal 6.0, I have most of my BW reports & iviews(querry,workbooks etc) defined in BW that opens thru portal & BEX.I have for that reason defined group in Eportal which corresponds to the same group name in BW (trx:SMLG) however this group is linkned only with BW application servers as our requirement is that we need login requests & HTTP sessions coming thru any external system to go only in application & not CI, this is happening perforctly but when checked with portal for some BW reports it sometimes goes to other applications but sometimes comes in BW CI as well.
    How to prevent them as the group created in not given CI entry.Also this case is happening only for internet users coming tru firewall (they all are coming thru a single terminal as seen in sm04) internal users are going thru applications only.
    Please let me know
    Regards
    SM

    Hi
    Can you make sure you are using super admin user with full access.
    Also check any firewall setting restrctions. Make sure no other users / other sessions opened.
    try to re-start the process and make sure all the services running.
    Below tag gives you some help.
    http://wiki.sdn.sap.com/wiki/display/JSTSG/%28JSTSG%29%28Web%29Problems-P94
    Regards
    Nagaraju

  • How to wash out an AM instance variable at the end of user session (logout)

    We have a need to create AM instance variables to hold some session level data, which is too complex to be held in a transient VO.
    What we observed is that the instance variable is not washed out at the end of the user session (i.e logout).
    I think since the AM instance is not really destroyed but only release back to the pool the instance variable content persists and is carried over to the next session that access the AM instance.
    What method in AM can be overridden to wash out this instance variable.
    At the moment we are resetting it in prepareSession(), but this means that the information is still held till the next session access the AM.
    It would be better to reset it when the AM is released back to the pool.
    Any pointers would be helpful.

    At the moment we are resetting it in prepareSession(), but this means that the information is still held till the next session access the AM.
    Note that prepareSession() is also invoked after AM activation so this can(and probaly will) reset your variable inside existing session.
    If you don't need to keep variable value between AM activations/passivations, you can use userData, for example:
    this.getSession().getUserData().put("someKey", value);
    UserData values are lost after AM passivation (by default).
    If you need to keep UserData variable value for lifetime of user session, then you can override passivateState() and activateState() as in this sample:
    Application State Management
    Dario

  • BC4J View not Thread safe, user sessions are using the same view instance

    Hi There,
    We are using BC4J that came with JDeveloper 10.1.2.0.0 with Oracle 10G 10.1.2.0.0.
    I have an BC4J account search view (BC4J AccountSearchView) that users can call to search for an account. So this view could be used by numerous users and pieces of code at the same time. Now my understanding is that each user gets their own instance of the view so changing the view's query should not be an issue (since the view definition is not changing). Under a light load the account search view looks like everyone get there own instance of the view and there expected account search results. But under a heavy user load when we have User A and User B the search query that was for User A will be used by User B. So the user results for one user will get the other users results.
    I do not understand if the view definition is been changed by the other user and is impacting all view instances. How can this occur if it is thread safe?
    I have enclosed the core code for this search.
    If you can help that would be much appreciated, thanks in advance,
    Nigel
    accountSearchView.setQuery(baseSelectQuery+generateWhereClause());
    logger.debug("SearchAccounts Query: "+accountSearchView.getQuery());
    System.out.println("SearchAccounts SQL: "+accountSearchView.getQuery());
    accountSearchView.setPassivationEnabled(false);
    accountSearchView.setForwardOnly(true);
    accountSearchView.executeQuery();
    get attributes for each row result and place in new Java bean objects and return to user.

    Nigel, we've only certified JDeveloper 10.1.2 against the Struts 1.1 with which it ships.
    If there have been any changes in Struts 1.2 to the Struts Request Processor, then this could easily have an impact on the BC4JRequestProcessor's correct functioning, depending on what the changes were.
    My quick look into the issue tells me that the ActionServlet init parameter named mapping in web.xml that we use for the 9.0.3-style BC4J/Struts integration is getting ignored by Struts 1.2. This parameter is used by Struts 1.1 to globally configure a custom ActionMapping subclass which can support additional properties. My quick test shows me that Struts 1.2 is ignoring this setting and so the oracle.jbo.html.struts11.BC4JActionMapping subclass of Struts's default ActionMapping is not getting used correctly as it does in Struts 1.1. This leads to errors when Struts tries to configure its actions in struts-config.xml since the Apache digester tries to set properties on the ActionMapping instance that don't exist (since the BC4JActionMapping has these properties, and it's not being used).
      <servlet>
        <servlet-name>action</servlet-name>
        <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
        <init-param>
          <param-name>mapping</param-name>
          <param-value>oracle.jbo.html.struts11.BC4JActionMapping</param-value>
        </init-param>
      </servlet>This is my quick analysis of what's not out-of-the-box compatible. I don't know enough about the changes in Struts 1.2 to know why this Struts 1.1 feature broke in Struts 1.2, or what the Struts 1.2 way to accomplish the same thing is.
    I'd encourage you to use Worldwide Support's Metalink site and open a TAR for any time-critical issues you need assistance in resolving. Many of us are constantly traveling and only able to sporadically chime in with tips in the forum as our time permits.
    The source of the BC4JRequestProcessor ships with the produce in the ./BC4J/src directory inside the bc4jstrutssrc.zip file.

  • How to know if user (session) is authenticated in other application (SSO)

    Hi folks!
    We've deployed various J2EE applications in some OC4J instances. So far the applications used SSO Authentication against OiD (LDAP), but we need a public access application.
    The problem is the following: we need a different behaviour in this last application (without authentication characteristics) depending on one user is authenticated within other application that required SSO login.
    How could check if current user (session) si authenticated against SSO, for example, in ADF-STRUTS DataAction class?
    We tested the gerRemoteUser() method but is only works within the applications requering login.
    Please, anyone could guide me?
    Mike
    Thanks!

    Hi,
    Oracle AS Single Sign ON stores some of the attributes of an authenticated user in a browser cookie - the name of the Cookie is SSO_ID.
    You cannot get any information from this Cookie. The Cookie is avaliable only to the Oracle AS Single Sign ON and is meant to be used only by it. You cannot read any useful information from the Cookie as it is higly encrypted.
    If you need to know the name of the currently logged in user, your application should be a Partner Application or an External Applciation to Oracle AS Single Sign On.
    The reason is simple - you can use your browser to connect to many Websites protected by Oracle AS Single Sign ON. Thus, if your application isn't a Partner or an External Application registered with SSO, your application can't establish a context.
    Hence, your application needs to be registered as a Partner Application or an External Application with SSO.
    An application which is nto registered with SSO cannot get the User information from SSO. The getRemoteUser() method would always return a null in such cases.
    Regards,
    Sandeep

  • User session stops completely and restarts (GNOME 3.10)

    Since last week I have experienced suddenly closing all applications closing and sending me to the log-in screen.
    Using journalctl I can see that all applications exited with a "Fatal IO error 11 (Resource temporarily unavailable) on X server :0". It all ends with the user session stopping and then being started again.
    Here is a journald log from yesterday at 13:10.
    Jan 16 13:10:35 archvision dbus[358]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such fil
    Jan 16 13:10:35 archvision dbus-daemon[358]: dbus[358]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Pictures/Screenshot%20from%202014-01-04%2000:45
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Pictures/Screenshot%20from%202014-01-04%2000:45
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Videos/sound_styling_table_of_contents.wav" was
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Pictures/Screenshot%20from%202013-12-28%2002:13
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Pictures/Screenshot%20from%202013-12-28%2002:08
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Git/p1-report/out.png" was not found, exec: eog
    Jan 16 13:11:52 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: recent-manager-provider.vala:132: Desktop file for "file:///home/bastian/Git/gitgraph/out.png" was not found, exec: eog,
    Jan 16 13:12:08 archvision gnome-session[512]: (gnome-settings-daemon:569): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: (deja-dup:1993): Gdk-WARNING **: deja-dup: Fatal IO error 104 (Connection reset by peer) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: (transmission-gtk:731): Gdk-WARNING **: transmission-gtk: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: CopyAgent: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: skype: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: xcb_connection_has_error() returned true
    Jan 16 13:12:08 archvision gnome-session[512]: Window manager warning: Log level 16: gnome-shell: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: SparkleShare: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: dropbox: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision colord[420]: Automatic remove of icc-faf837061e668d9b052248618ab54c15 from xrandr-Chi Mei Optoelectronics corp.
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-faf837061e668d9b052248618ab54c15
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-d81d4c735fbeec9cb2338b26b884af5d
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-e01a3aa966ec476f6f7f10befcaf4a93
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-46fc44daad94d12a6b26c88f7d89e032
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-4fe850f70957b4b2d6afcbdf852b8027
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-46965f5505458ec64e8697211a352322
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-23de2f0eaffd00e9354ff9c155d0b8a1
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-b464ec762f975aa10134c2892d60657e
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-92e63b59caa77681fe1f11e64cb069e7
    Jan 16 13:12:08 archvision colord[420]: Profile removed: icc-10bb2bcfa705d9b655d32bf92f4d65e9
    Jan 16 13:12:08 archvision colord[420]: device removed: xrandr-Chi Mei Optoelectronics corp.
    Jan 16 13:12:08 archvision gnome-session[512]: (evolution-alarm-notify:722): Gdk-WARNING **: evolution-alarm-notify: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: (nm-applet:721): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision systemd[1]: Stopping Session 2 of user bastian.
    Jan 16 13:12:08 archvision systemd[1]: Stopped Session 2 of user bastian.
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision systemd-logind[356]: Removed session 2.
    Jan 16 13:12:08 archvision systemd[1]: Stopping User Manager for 1000...
    Jan 16 13:12:08 archvision systemd[506]: Stopping Default.
    Jan 16 13:12:08 archvision systemd[506]: Stopped target Default.
    Jan 16 13:12:08 archvision systemd[506]: Starting Shutdown.
    Jan 16 13:12:08 archvision systemd[506]: Reached target Shutdown.
    Jan 16 13:12:08 archvision systemd[506]: Starting Exit the Session...
    Jan 16 13:12:08 archvision gnome-session[512]: (deja-dup-monitor:750): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.UDisks2VolumeMonitor disconnected from the bus; removing dr
    Jan 16 13:12:08 archvision gnome-session[512]: (deja-dup-monitor:750): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.MTPVolumeMonitor disconnected from the bus; removing drives
    Jan 16 13:12:08 archvision gnome-session[512]: (deja-dup-monitor:750): GVFS-RemoteVolumeMonitor-WARNING **: Owner of volume monitor org.gtk.Private.GoaVolumeMonitor disconnected from the bus; removing drives
    Jan 16 13:12:08 archvision gnome-session[512]: ** (zeitgeist-datahub:726): WARNING **: zeitgeist-datahub.vala:226: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision gnome-session[512]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Jan 16 13:12:08 archvision gnome-session[512]: Received signal:15->'Terminated'
    Jan 16 13:12:08 archvision systemd[1]: Stopped User Manager for 1000.
    Three minutes later it happened again. (journald log again)
    Jan 16 13:14:35 archvision dbus-daemon[358]: dbus[358]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to
    Jan 16 13:15:18 archvision gnome-session[2416]: [228B blob data]
    Jan 16 13:15:26 archvision systemd[1]: Starting Cleanup of Temporary Directories...
    Jan 16 13:15:26 archvision systemd-tmpfiles[3286]: stat(/run/user/1000/gvfs) failed: Permission denied
    Jan 16 13:15:26 archvision systemd[1]: Started Cleanup of Temporary Directories.
    Jan 16 13:15:43 archvision gnome-session[2416]: Window manager warning: Received a NET_CURRENT_DESKTOP message from a broken (outdated) client who sent a 0 timestamp
    Jan 16 13:15:43 archvision gnome-session[2416]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1600003 (#archlinux)
    Jan 16 13:15:43 archvision gnome-session[2416]: Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
    Jan 16 13:16:12 archvision gnome-session[2416]: (gnome-settings-daemon:2471): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: dropbox: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: CopyAgent: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: SparkleShare: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: gnome-session[2416]: WARNING: App 'gnome-settings-daemon.desktop' exited with code 1
    Jan 16 13:16:12 archvision gnome-session[2416]: WARNING: App 'gnome-settings-daemon.desktop' exited with code 1
    Jan 16 13:16:12 archvision colord[420]: Automatic remove of icc-faf837061e668d9b052248618ab54c15 from xrandr-Chi Mei Optoelectronics corp.
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-faf837061e668d9b052248618ab54c15
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-d81d4c735fbeec9cb2338b26b884af5d
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-e01a3aa966ec476f6f7f10befcaf4a93
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-46fc44daad94d12a6b26c88f7d89e032
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-4fe850f70957b4b2d6afcbdf852b8027
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-46965f5505458ec64e8697211a352322
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-23de2f0eaffd00e9354ff9c155d0b8a1
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-b464ec762f975aa10134c2892d60657e
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-92e63b59caa77681fe1f11e64cb069e7
    Jan 16 13:16:12 archvision colord[420]: Profile removed: icc-10bb2bcfa705d9b655d32bf92f4d65e9
    Jan 16 13:16:12 archvision colord[420]: device removed: xrandr-Chi Mei Optoelectronics corp.
    Jan 16 13:16:12 archvision gnome-session[2416]: Window manager warning: Log level 16: gnome-shell: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: (nm-applet:2622): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: (transmission-gtk:2632): Gdk-WARNING **: transmission-gtk: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: xcb_connection_has_error() returned true
    Jan 16 13:16:12 archvision sudo[3108]: pam_unix(sudo:session): session closed for user root
    Jan 16 13:16:12 archvision gnome-session[2416]: (evolution-alarm-notify:2623): Gdk-WARNING **: evolution-alarm-notify: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision gnome-session[2416]: (empathy:3185): Gdk-WARNING **: empathy: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Jan 16 13:16:12 archvision systemd[1]: Stopping Session 5 of user bastian.
    Jan 16 13:16:12 archvision systemd[1]: Stopped Session 5 of user bastian.
    Jan 16 13:16:12 archvision systemd-logind[356]: Removed session 5.
    Jan 16 13:16:12 archvision systemd[1]: Stopping User Manager for 1000...
    Jan 16 13:16:12 archvision gnome-session[2416]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    The dmesg log doesn't seem to have much in it, though.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.7-2-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=61f8c7e3-2df0-4a94-9a43-23f12a9c7334 rw resume=/dev/sda2 resume_offset=12656640 quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c96e6fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c96e7000-0x00000000ca08efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ca08f000-0x00000000ca115fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ca116000-0x00000000ca1e8fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ca1e9000-0x00000000ca621fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ca622000-0x00000000ca622fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ca623000-0x00000000ca665fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ca666000-0x00000000cade0fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cade1000-0x00000000caff2fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000caff3000-0x00000000caffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: CLEVO CO. W35_37ET/W35_37ET, BIOS 4.6.5 12/14/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FE0000000 write-back
    [ 0.000000] 2 base 220000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 6 base 0CB800000 mask FFF800000 uncachable
    [ 0.000000] 7 base 22F800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 22F600000 mask FFFE00000 uncachable
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd860-0x000fd86f] mapped at [ffff8800000fd860]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22f400000-0x22f5fffff]
    [ 0.000000] [mem 0x22f400000-0x22f5fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22f3fffff]
    [ 0.000000] [mem 0x22c000000-0x22f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
    [ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xc96e6fff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xc95fffff] page 2M
    [ 0.000000] [mem 0xc9600000-0xc96e6fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xca08f000-0xca115fff]
    [ 0.000000] [mem 0xca08f000-0xca115fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xca622000-0xca622fff]
    [ 0.000000] [mem 0xca622000-0xca622fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xca666000-0xcade0fff]
    [ 0.000000] [mem 0xca666000-0xca7fffff] page 4k
    [ 0.000000] [mem 0xca800000-0xcabfffff] page 2M
    [ 0.000000] [mem 0xcac00000-0xcade0fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xcaff3000-0xcaffffff]
    [ 0.000000] [mem 0xcaff3000-0xcaffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x37978000-0x37cb3fff]
    [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 00000000ca19e080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ca1a72d8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ca19e190 09148 (v02 ALASKA A M I 00000021 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000ca1e7080 00040
    [ 0.000000] ACPI: APIC 00000000ca1a73e8 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ca1a7480 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000ca1a74c8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000ca1a7508 00EA5 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
    [ 0.000000] ACPI: HPET 00000000ca1a83b0 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ca1a83e8 00315 (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca1a8700 00926 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca1a9028 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca1a9ac0 00574 (v01 SgRef SgTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca1aa038 00FAC (v01 OptRef OptTabl 00001000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22f5fffff]
    [ 0.000000] NODE_DATA [mem 0x22f5f0000-0x22f5f4fff]
    [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226c00000-ffff88022ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x22f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xc96e6fff]
    [ 0.000000] node 0: [mem 0xca08f000-0xca115fff]
    [ 0.000000] node 0: [mem 0xca622000-0xca622fff]
    [ 0.000000] node 0: [mem 0xca666000-0xcade0fff]
    [ 0.000000] node 0: [mem 0xcaff3000-0xcaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x22f5fffff]
    [ 0.000000] On node 0 totalpages: 2069138
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12852 pages used for memmap
    [ 0.000000] DMA32 zone: 822518 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19416 pages used for memmap
    [ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc96e7000-0xca08efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca116000-0xca1e8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca1e9000-0xca621fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xca623000-0xca665fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcade1000-0xcaff2fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022f200000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036785
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=61f8c7e3-2df0-4a94-9a43-23f12a9c7334 rw resume=/dev/sda2 resume_offset=12656640 quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8063300K/8276552K available (5115K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 213252K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.611 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.77 BogoMIPS (lpj=7982036)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000030] Security Framework initialized
    [ 0.000037] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000038] Yama: becoming mindful.
    [ 0.000541] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002566] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003470] Mount-cache hash table entries: 256
    [ 0.003632] Initializing cgroup subsys memory
    [ 0.003640] Initializing cgroup subsys devices
    [ 0.003642] Initializing cgroup subsys freezer
    [ 0.003643] Initializing cgroup subsys net_cls
    [ 0.003645] Initializing cgroup subsys blkio
    [ 0.003665] CPU: Physical Processor ID: 0
    [ 0.003666] CPU: Processor Core ID: 0
    [ 0.003671] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.004041] mce: CPU supports 9 MCE banks
    [ 0.004054] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004065] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 1
    [ 0.004173] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.005132] ACPI: Core revision 20130725
    [ 0.011088] ACPI: All ACPI Tables successfully acquired
    [ 0.012488] ftrace: allocating 20316 entries in 80 pages
    [ 0.022278] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055311] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.055317] TSC deadline timer enabled
    [ 0.055324] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.055330] ... version: 3
    [ 0.055331] ... bit width: 48
    [ 0.055332] ... generic registers: 4
    [ 0.055333] ... value mask: 0000ffffffffffff
    [ 0.055334] ... max period: 0000ffffffffffff
    [ 0.055334] ... fixed-purpose events: 3
    [ 0.055335] ... event mask: 000000070000000f
    [ 0.095724] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.082109] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.218035] Brought up 8 CPUs
    [ 0.218039] smpboot: Total of 8 processors activated (38329.18 BogoMIPS)
    [ 0.225368] devtmpfs: initialized
    [ 0.228016] PM: Registering ACPI NVS region [mem 0xca116000-0xca1e8fff] (864256 bytes)
    [ 0.228030] PM: Registering ACPI NVS region [mem 0xca623000-0xca665fff] (274432 bytes)
    [ 0.228771] RTC time: 10:58:11, date: 01/16/14
    [ 0.228806] NET: Registered protocol family 16
    [ 0.228897] cpuidle: using governor ladder
    [ 0.228898] cpuidle: using governor menu
    [ 0.228925] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.228926] ACPI: bus type PCI registered
    [ 0.228928] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.228974] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.228976] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.236206] PCI: Using configuration type 1 for base access
    [ 0.236847] bio: create slab <bio-0> at 0
    [ 0.236959] ACPI: Added _OSI(Module Device)
    [ 0.236960] ACPI: Added _OSI(Processor Device)
    [ 0.236961] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.236962] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.238281] ACPI: EC: Look up EC in DSDT
    [ 0.239565] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.288607] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.288988] ACPI: SSDT 00000000ca03c018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.289328] ACPI: Dynamic OEM Table Load:
    [ 0.289330] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.302166] ACPI: SSDT 00000000ca03da98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.302528] ACPI: Dynamic OEM Table Load:
    [ 0.302530] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.318721] ACPI: SSDT 00000000ca03ec18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.319055] ACPI: Dynamic OEM Table Load:
    [ 0.319056] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.334857] ACPI: Interpreter enabled
    [ 0.334865] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.334868] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.334881] ACPI: (supports S0 S3 S4 S5)
    [ 0.334882] ACPI: Using IOAPIC for interrupt routing
    [ 0.334905] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.335040] ACPI: No dock devices found.
    [ 0.345033] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.345229] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.345415] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
    [ 0.345984] PCI host bridge to bus 0000:00
    [ 0.345987] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.345989] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.345990] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.345992] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.345993] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.345995] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.345996] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.345998] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.345999] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.346001] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.346002] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff]
    [ 0.346009] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.346096] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.346125] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.346170] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.346203] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.346213] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.346219] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.346223] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.347124] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.347146] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
    [ 0.347218] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.347265] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.347299] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.347322] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b00f 64bit]
    [ 0.347399] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.347484] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.347505] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a18000-0xf7a183ff]
    [ 0.347596] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.347658] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.347692] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.347707] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
    [ 0.347775] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.347824] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.347854] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.347933] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.347984] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.348014] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 0.348093] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.348144] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.348174] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 0.348253] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.348305] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.348342] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.348363] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a17000-0xf7a173ff]
    [ 0.348454] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.348513] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.348545] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 0.348724] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.348743] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.348750] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.348757] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.348765] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.348772] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.348780] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a16000-0xf7a167ff]
    [ 0.348825] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.348896] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.348911] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a15000-0xf7a150ff 64bit]
    [ 0.348932] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.349064] pci 0000:01:00.0: [10de:0fd4] type 00 class 0x030000
    [ 0.349075] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.349086] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.349096] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.349104] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.349112] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.349163] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.355360] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.355365] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.355380] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.355383] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.355452] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.355555] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
    [ 0.355593] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf7901fff 64bit]
    [ 0.355775] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.355814] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.362045] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.362061] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.362207] pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
    [ 0.362270] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf780ffff]
    [ 0.362784] pci 0000:04:00.0: supports D1 D2
    [ 0.362786] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.362879] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.362979] pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
    [ 0.363037] pci 0000:04:00.2: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.363148] pci 0000:04:00.2: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
    [ 0.363217] pci 0000:04:00.2: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
    [ 0.363519] pci 0000:04:00.2: supports D1 D2
    [ 0.363520] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.368781] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.368785] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.368789] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.368795] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
    [ 0.368823] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.369733] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.369781] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.369827] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.369872] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.369915] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.369960] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.370004] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.370048] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.370236] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.370243] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.370294] Found 1 acpi root devices
    [ 0.370323] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.370389] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.370393] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 0.370394] vgaarb: loaded
    [ 0.370395] vgaarb: bridge control possible 0000:01:00.0
    [ 0.370396] vgaarb: no bridge control possible 0000:00:02.0
    [ 0.370422] PCI: Using ACPI for IRQ routing
    [ 0.371982] PCI: pci_cache_line_size set to 64 bytes
    [ 0.372033] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.372038] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.372039] e820: reserve RAM buffer [mem 0xc96e7000-0xcbffffff]
    [ 0.372041] e820: reserve RAM buffer [mem 0xca116000-0xcbffffff]
    [ 0.372043] e820: reserve RAM buffer [mem 0xca623000-0xcbffffff]
    [ 0.372044] e820: reserve RAM buffer [mem 0xcade1000-0xcbffffff]
    [ 0.372045] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
    [ 0.372047] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
    [ 0.372123] NetLabel: Initializing
    [ 0.372124] NetLabel: domain hash size = 128
    [ 0.372125] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.372136] NetLabel: unlabeled traffic allowed by default
    [ 0.372156] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.372160] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.374183] Switched to clocksource hpet
    [ 0.377767] pnp: PnP ACPI init
    [ 0.377776] ACPI: bus type PNP registered
    [ 0.377837] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.377840] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.377850] pnp 00:01: [dma 4]
    [ 0.377862] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.377880] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.377956] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.377992] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.377994] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.377995] system 00:04: [io 0xffff] has been reserved
    [ 0.377997] system 00:04: [io 0xffff] has been reserved
    [ 0.377999] system 00:04: [io 0x0400-0x0453] could not be reserved
    [ 0.378001] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.378002] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.378005] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.378007] system 00:04: [io 0x3322-0x3323] has been reserved
    [ 0.378009] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378032] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.378073] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.378076] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.378116] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.378119] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378140] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.378164] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.378207] pnp 00:0a: Plug and Play ACPI device, IDs ETD0403 PNP0f13 (active)
    [ 0.378833] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.378835] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.378837] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.378839] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.378841] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.378842] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.378844] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.378846] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.378848] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.378849] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.378851] system 00:0b: [mem 0xcfa00000-0xcfa00fff] has been reserved
    [ 0.378853] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378985] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.378987] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
    [ 0.378989] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.379002] pnp: PnP ACPI: found 13 devices
    [ 0.379003] ACPI: bus type PNP unregistered
    [ 0.385141] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.385144] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.385147] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.385149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.385153] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.385163] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.385168] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.385176] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.385178] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.385183] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.385187] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
    [ 0.385193] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.385194] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.385196] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.385198] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.385199] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.385201] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.385202] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.385204] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.385205] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.385207] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff]
    [ 0.385208] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.385210] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.385212] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.385213] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
    [ 0.385215] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.385216] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 0.385218] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
    [ 0.385242] NET: Registered protocol family 2
    [ 0.385406] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.385585] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.385695] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.385709] TCP: reno registered
    [ 0.385721] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.385747] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.385806] NET: Registered protocol family 1
    [ 0.385816] pci 0000:00:02.0: Boot video device
    [ 0.421017] PCI: CLS 64 bytes, default 64
    [ 0.421049] Unpacking initramfs...
    [ 0.476133] Freeing initrd memory: 3312K (ffff880037978000 - ffff880037cb4000)
    [ 0.476137] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.476140] software IO TLB [mem 0xc56e7000-0xc96e7000] (64MB) mapped at [ffff8800c56e7000-ffff8800c96e6fff]
    [ 0.476405] Scanning for low memory corruption every 60 seconds
    [ 0.476648] audit: initializing netlink socket (disabled)
    [ 0.476657] type=2000 audit(1389869891.466:1): initialized
    [ 0.488246] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.489340] zbud: loaded
    [ 0.489487] VFS: Disk quotas dquot_6.5.2
    [ 0.489519] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.489651] msgmni has been set to 15755
    [ 0.489888] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.489932] io scheduler noop registered
    [ 0.489933] io scheduler deadline registered
    [ 0.489954] io scheduler cfq registered (default)
    [ 0.490106] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.490450] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.490462] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.490496] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 0.490497] vesafb: scrolling: redraw
    [ 0.490499] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.491479] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 8128k, total 8128k
    [ 0.636131] Console: switching to colour frame buffer device 240x67
    [ 0.780205] fb0: VESA VGA frame buffer device
    [ 0.780223] intel_idle: MWAIT substates: 0x21120
    [ 0.780225] intel_idle: v0.4 model 0x3A
    [ 0.780226] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.780420] GHES: HEST is not enabled!
    [ 0.780463] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.780820] Linux agpgart interface v0.103
    [ 0.780890] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:ELNM] at 0x60,0x64 irq 1,12
    [ 0.784163] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.785597] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.785607] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.785609] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.785610] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.785612] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.785735] mousedev: PS/2 mouse device common for all mice
    [ 0.785878] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.785904] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.785912] Intel P-state driver initializing.
    [ 0.785920] Intel pstate controlling: cpu 0
    [ 0.785931] Intel pstate controlling: cpu 1
    [ 0.785941] Intel pstate controlling: cpu 2
    [ 0.785949] Intel pstate controlling: cpu 3
    [ 0.785957] Intel pstate controlling: cpu 4
    [ 0.785972] Intel pstate controlling: cpu 5
    [ 0.785981] Intel pstate controlling: cpu 6
    [ 0.785990] Intel pstate controlling: cpu 7
    [ 0.786051] drop_monitor: Initializing network drop monitor service
    [ 0.786109] TCP: cubic registered
    [ 0.786182] NET: Registered protocol family 10
    [ 0.786325] NET: Registered protocol family 17
    [ 0.786334] Key type dns_resolver registered
    [ 0.786578] registered taskstats version 1
    [ 0.787128] Magic number: 14:671:982
    [ 0.787215] rtc_cmos 00:05: setting system clock to 2014-01-16 10:58:12 UTC (1389869892)
    [ 0.787265] PM: Checking hibernation image partition /dev/sda2
    [ 0.788167] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.917532] PM: Hibernation image not present or could not be loaded.
    [ 0.918293] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 0.918295] Write protecting the kernel read-only data: 8192k
    [ 0.921673] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 0.922590] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 0.930285] systemd-udevd[78]: starting version 208
    [ 0.946773] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it!
    [ 0.946873] ACPI: bus type USB registered
    [ 0.946876] rtsx_pci 0000:04:00.0: irq 41 for MSI/MSI-X
    [ 0.946891] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
    [ 0.946903] usbcore: registered new interface driver usbfs
    [ 0.946913] usbcore: registered new interface driver hub
    [ 0.946973] usbcore: registered new device driver usb
    [ 0.947532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.947546] SCSI subsystem initialized
    [ 0.947733] ehci-pci: EHCI PCI platform driver
    [ 0.947815] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 0.947818] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.947822] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.947912] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.947929] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
    [ 0.948102] hub 1-0:1.0: USB hub found
    [ 0.948109] hub 1-0:1.0: 4 ports detected
    [ 0.948401] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.948403] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.948552] libata version 3.00 loaded.
    [ 0.948642] hub 2-0:1.0: USB hub found
    [ 0.948650] hub 2-0:1.0: 4 ports detected
    [ 0.958134] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 0.958140] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.958144] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.958158] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.962052] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.962064] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a18000
    [ 0.971372] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.971521] hub 3-0:1.0: USB hub found
    [ 0.971526] hub 3-0:1.0: 2 ports detected
    [ 0.971698] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.971702] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.971705] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.971715] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.975613] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.975623] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a17000
    [ 0.984789] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.985103] hub 4-0:1.0: USB hub found
    [ 0.985111] hub 4-0:1.0: 2 ports detected
    [ 0.985259] ahci 0000:00:1f.2: version 3.0
    [ 0.985433] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.985471] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.998181] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
    [ 0.998189] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 0.998204] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.018886] scsi0 : ahci
    [ 1.019098] scsi1 : ahci
    [ 1.019311] scsi2 : ahci
    [ 1.019494] scsi3 : ahci
    [ 1.019689] scsi4 : ahci
    [ 1.019866] scsi5 : ahci
    [ 1.019956] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 43
    [ 1.019960] ata2: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16180 irq 43
    [ 1.019962] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 43
    [ 1.019964] ata4: DUMMY
    [ 1.019966] ata5: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16300 irq 43
    [ 1.019968] ata6: DUMMY
    [ 1.308506] usb 1-3: new low-speed USB device number 2 using xhci_hcd
    [ 1.327890] usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.329720] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.333161] usbcore: registered new interface driver usbhid
    [ 1.333165] usbhid: USB HID core driver
    [ 1.334114] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input7
    [ 1.334423] hid-generic 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-3/input0
    [ 1.338456] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.339420] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.339425] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.339428] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.349868] ata1.00: ATA-9: INTEL SSDSC2CT180A3, 300i, max UDMA/133
    [ 1.349884] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.359418] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.359434] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.359436] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.369892] ata1.00: configured for UDMA/133
    [ 1.370166] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CT18 300i PQ: 0 ANSI: 5
    [ 1.435266] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.478575] tsc: Refined TSC clocksource calibration: 2394.560 MHz
    [ 1.559838] hub 3-1:1.0: USB hub found
    [ 1.560024] hub 3-1:1.0: 6 ports detected
    [ 1.668796] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 1.688767] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.792889] hub 4-1:1.0: USB hub found
    [ 1.793095] hub 4-1:1.0: 8 ports detected
    [ 1.908729] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.908736] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.908739] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.062606] usb 4-1.6: new high-speed USB device number 3 using ehci-pci
    [ 2.319022] ata2.00: ATA-8: TOSHIBA MK3252GSX, LV010A, max UDMA/100
    [ 2.319029] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.320366] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 2.320373] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 2.320377] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 2.321451] ata2.00: configured for UDMA/100
    [ 2.321618] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
    [ 2.479612] Switched to clocksource tsc
    [ 2.639562] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.643607] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208DB, TC01, max UDMA/100
    [ 2.653637] ata3.00: configured for UDMA/100
    [ 2.662862] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208DB TC01 PQ: 0 ANSI: 5
    [ 2.983186] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.988352] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB)
    [ 2.988411] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 2.988487] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.988493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.988494] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.988497] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.988529] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.988537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.989966] sda: sda1 sda2
    [ 2.990254] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.993241] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.993244] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.993378] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 3.069540] sdb: sdb1 sdb2
    [ 3.070543] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 3.418979] PM: Starting manual resume from disk
    [ 3.418984] PM: Hibernation image partition 8:2 present
    [ 3.418986] PM: Looking for hibernation image.
    [ 3.419700] PM: Image not found (code -22)
    [ 3.419705] PM: Hibernation image not present or could not be loaded.
    [ 3.444138] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.499597] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.500097] systemd[1]: Set hostname to <archvision>.
    [ 3.559092] systemd[1]: Starting Collect Read-Ahead Data...
    [ 3.560163] systemd[1]: Starting Replay Read-Ahead Data...
    [ 3.560463] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.560524] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.560551] systemd[1]: Starting Login Prompts.
    [ 3.560567] systemd[1]: Reached target Login Prompts.
    [ 3.560588] systemd[1]: Starting Remote File Systems.
    [ 3.560603] systemd[1]: Reached target Remote File Systems.
    [ 3.560622] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.560664] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.560678] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.560719] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.560730] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.560749] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.560759] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.560779] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.560811] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.560941] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.560960] systemd[1]: Starting Journal Socket.
    [ 3.561026] systemd[1]: Listening on Journal Socket.
    [ 3.561056] systemd[1]: Mounting Huge Pages File System...
    [ 3.561370] systemd[1]: Starting Journal Service...
    [ 3.561773] systemd-readahead[160]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
    [ 3.561816] systemd[1]: Started Journal Service.
    [ 3.576539] systemd-journald[162]: Vacuuming done, freed 0 bytes
    [ 3.607183] EXT4-fs (sda1): re-mounted. Opts: data=ordered,discard
    [ 3.610857] systemd-udevd[197]: starting version 208
    [ 3.611093] scsi6 : vhba
    [ 3.647675] ACPI: Requesting acpi_cpufreq
    [ 3.648443] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
    [ 3.648448] ACPI: Power Button [PWRB]
    [ 3.648507] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input9
    [ 3.648511] ACPI: Sleep Button [SLPB]
    [ 3.649258] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input10
    [ 3.663330] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 3.666930] mei_me 0000:00:16.0: setting latency timer to 64
    [ 3.666967] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 3.668677] ACPI: Lid Switch [LID0]
    [ 3.668720] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input11
    [ 3.668723] ACPI: Power Button [PWRF]
    [ 3.669670] ACPI: Battery Slot [BAT] (battery present)
    [ 3.670212] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.670214] ACPI: Thermal Zone [TZ0] (35 C)
    [ 3.670260] [drm] Initialized drm 1.1.0 20060810
    [ 3.671009] ACPI: AC Adapter [AC] (off-line)
    [ 3.671841] wmi: Mapper loaded
    [ 3.673496] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 3.673503] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
    [ 3.673726] r8169 0000:04:00.2: irq 45 for MSI/MSI-X
    [ 3.673936] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 3.673942] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.674142] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc90005f5a000, 00:90:f5:e4:9c:92, XID 08800800 IRQ 45
    [ 3.674145] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 3.674610] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 3.674614] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.674616] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.674618] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251)
    [ 3.674620] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.674621] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
    [ 3.674623] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130725/utaddress-251)
    [ 3.674625] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.674625] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 3.676500] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 3.680556] cfg80211: Calling CRDA to update world regulatory domain
    [ 3.684359] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 3.684362] Copyright(c) 2003-2013 Intel Corporation
    [ 3.687182] pcieport 0000:00:1c.2: driver skip pci_set_master, fix it!
    [ 3.687240] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 3.687319] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X
    [ 3.689230] input: PC Speaker as /devices/platform/pcspkr/input/input13
    [ 3.689318] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input14
    [ 3.691653] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 3.694703] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
    [ 3.699874] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
    [ 3.700326] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
    [ 3.700721] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 3.700968] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 3.700970] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 3.700971] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 3.700972] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
    [ 3.701019] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 3.707821] [drm] Memory usable by graphics device = 2048M
    [ 3.707823] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
    [ 3.707824] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
    [ 3.707825] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 3.707842] Console: switching to colour dummy device 80x25
    [ 3.708353] i915 0000:00:02.0: setting latency timer to 64
    [ 3.719419] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 3.731545] iTCO_vendor_support: vendor-support=0
    [ 3.731802] iTCO_wdt: Intel TCO WatchDog Timer Dri

    zozi56 wrote:Can you reproduce the problem without Skype, Bastian?
    From what I remember I have also had this issue when Skype wasn't open.
    Yesterday my computer started up beeping - I took the harddisk out and it started normally (initramfs tho). Then I put it back in and the laptop have been running fine so far. I suspect it might just have been a bad connection, but I am giving it time..
    EDIT: Still experiencing the issue..
    Last edited by Bastian (2014-01-19 18:09:08)

  • Java Add-in Installation of the Central instance installation

    I'm trying to re-install the Java Add-in Central Instance for ABAP.
    During the installation of Java Engine, i met the error on SecureStore step.
    In the LOG:
    >> SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    >> A key/value pair with this key already exists in the store.
    I had the right roles at the user SAPJSF.
    I have also renamed the files in /usr/sap/MWF/SYS/global/security/data
    SecStore.key
    SecStore.properties
    ..and i receive the following:
    SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    com.sap.security.core.server.secstorefs.FileMissingException: File "/sapmnt/MWF/global/security/data/SecStore.properties" does not exist although it should.
            at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
            at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
            at com.sap.security.core.server.secstorefs.SecStoreFS.handleInsert(SecStoreFS.java:963)
            at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1276)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
            at java.lang.reflect.Method.invoke(Method.java:391)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    If i rename only the SecStore.key in SecStore.key.old, i will receive the following:
    >> SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    >> Warning: this command line user interface is meant as a last resort if
    >> everything else fails.
    >> The key phrase that you must type in now will be visible on the screen!
    I've also lunched the following command from the opreating system level:
    /usr/java14_64/bin/java -classpath /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI/install/sharedlib/launcher.jar -Xmx256m -Xj9 com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS /usr/sap/MWF/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/MWF/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/MWF/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/MWF/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/MWF/SYS/global/security/lib/tools/w3c_http.jar:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI/install/lib:/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI/install/sharedlib:/usr/opt/db2_08_01/java//db2jcc.jar:/usr/opt/db2_08_01/java//db2jcc_license_cisuz.jar insert -s MWF -f /usr/sap/MWF/SYS/global/security/data/SecStore.properties -k /sapmnt/MWF/global/security/data/SecStore.key admin/host/MWF
    >> SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    >> Usage:
    >> SecStoreFS status  <standard>
    >> SecStoreFS exists  <standard>
    >> SecStoreFS create  <standard> -noenc
    >> SecStoreFS create  <standard> -enc -p "<key phrase>" [-nostore]
    >> SecStoreFS insert  <standard> <key> <value>
    >> SecStoreFS encrypt <standard>      -p "<key phrase>" [-nostore]
    >> SecStoreFS updatep <standard>      -p "<key phrase>" [-nostore]
    >>where <standard> is [-s <SID>] [-f <data filename> -k <key filename>]
    >> No value given!
    Anybody knows how is possible to follow with the installation?
    Best Regards.

    Dear Kumar,
    referring to the note 1063396, i haven't got "iaik_jce_export.jar" file in the directory specifed in the note.
    So, i've just renamed the following files
    SecStore.key
    SecStore.properties
    NOTHING DIFFERENT.
    To be sure, i have also renamed the directory /sapmnt/MWF/global/security/data  --> data.old
    You can see the result on the following log:
    >>/tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/DB2/CENTRAL/CI#cat SecureStoreInsert.log
    >>SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    >>
    >>com.sap.security.core.server.secstorefs.FileMissingException: >>File "/sapmnt/MWF/global/security/data/SecStore.properties" does not exist although it should.
    >>        at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
    >>        at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
    >>        at com.sap.security.core.server.secstorefs.SecStoreFS.handleInsert(SecStoreFS.java:963)
    >>        at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1276)
    >>        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    >>        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
    >>        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
    >>        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
    >>        at java.lang.reflect.Method.invoke(Method.java:391)
    >>        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Do you have any idea to solve the problem and to start teh installation again?
    Best regards.

  • Best Practice to migrate existing Message/Central Instance to new hardware?

    I've done some searching for this, but it all seems to be fairly old (I found one decent thread from 2008, but it just seemed outdated).  I would like to get some updated info & suggestions on a process to follow for this task.
    Here is some info about the current config:
    I have an existing SAP ERP 6.0 EHP5 system.  SID "XYZ"
    Everything is currently running on Windows x64.
    ABAP only config.
    It is currently setup as a distributed system.
    DB server is SQL, which is running on its own hardware as a dedicated DB server.  I don't need to touch this.
    Uses logon groups to distribute the load between 3 App servers.
    One of the App Servers is setup as the Message/CI server. This is what I am wanting to move to VM hardware.
    The other two App Servers are setup just as Dialog Instances.  VM already.  I don't need to touch these.
    What I am wanting to do:
    I am wanting to migrate the existing Message/CI server to VM hardware to get the current Message/CI system off of very old hardware.
    I need to keep the system with the same name & IP.
    I do not need/want to mess with the DB server at all. 
    Need to minimize downtime as much as possible.
    I do NOT want to go to an HA environment.  That is a different project for the future.
    Suggestions? I would like to hear what some of you have done.
    Minimize downtime?  I have a short maintenance window of a few hours coming up in the next few months, and would like to do this changeover during that downtime.
    How do I handle setting this up on the new hardware using the same name & IP, especially with the existing system still running.
    What I think I need to do: (Some of these may be out of order, which is why I'm asking for suggestions)
    Setup new Windows VM server, named differently than current Message/CI server (Done already).
    Run SAPINST to run Global Host Preparation on the new Windows VM server.
    Run SAPINST to setup ASCS Instance on the new Windows VM server.
    Skip the Database Instance installation, since I already have one running.
    Run SAPINST to setup Central Instance on the new Windows VM server.
    Copy all of the appropriate profile parameters that were on the old server.
    Start SAP and make sure everything is running and working correctly.
    Copy all job, spool files, etc. from the old server.
    What needs to be done in between those steps for the server rename & IP changes?
    Which of these steps can I do in advance of my maintenance downtime window, without it affecting the currently running system?
    I have a test environment that I am going to test this with.  I'm just trying to get a jump start on my instructions, so that I can hopefully do this quickly and easily.  I'm very comfortable doing the installs.  Just needing some guidance on how to handle this case.
    I'm open to suggestions, and any links you can send my way that show some more recent success at doing this.  Everything I keep finding talks about doing the migration for the DB.  I am not migrating my DB.  It is staying where it is.  I'm just wanting to migrate my Message/Central Instance to a VM, without affecting the users, and hopefully them never noticing the changes.
    Thanks!

    If you're using VMWare, there is a tool provided to virtualize existing systems.  Basically it makes a copy of the old system (while it is down) and recreates it as a VM with the same name, IP, etc.  I haven't double-checked to see if this process is 'officially' supported by SAP, and I don't know the technical details about how it's done or how long it will take (VMWare is managed by the Network Operations group in my team, so as the SAP sysadmin I'm basically a customer of theirs).  However, we have virtualized a few smaller systems that needed to get off failing hardware in a hurry and it worked very well, so I would expect it would for an SAP dialog instance as well.  As you're not copying a database, just the app server, it probably would fit within your maintenance window.
    If this route works for you, then there is no need to actually install the SAP system on the VM instance... you just copy the old server as-is, then make any adjustments required due to no longer needing old drivers, etc, plus potentially having different memory parameters.

  • Max. Concurrent # of users (SESSIONS) in RAC Env

    Hello Fellows,
    Assuming that you have adequite SGA, PGA, Processes parameters...and given that you have enough RAM, CPU resources..... :
    - We have 2 RAC Nodes
    - We have SESSIONS parameter set for both instances to --> 1600.
    Does that imply that this system can handle [ (1600 x 2) - (ora processes + recursive sql) = almost --> 3000 concurrent sessions/users ?
    We modifed SESSIONS parameter by (Alomg with other DB/HW neceesary changes:
    SQL> ALTER SYSTEM SET SESSIONS=1600;which should be for both instances by default according to oracle RAC documentation.
    Appreciate your inputs.
    Cheers,
    Feras

    BTW, we have CRS and RAC 10gR1 (10.1.0.4) on Soalris 5.9 nodes. SPARC 64-bit

  • Central instance and SAP instance

    hello,
    Im confusing with Central Instance (CI) and SAP instance (Application Instance)
    According to my understanding, i think SAP instance is running on all the Aplication servers. (if having 4 Application servers, in all those servers, SAP instance is running concurrently)
    But Central instance is running on 1 of the Application servers only.
    - How will the SAP decides on which Application should run the central instance.
    Will that CI change automatically time to time.... or do we need to allocate 1 Application server as CI server, when doing the installation.
    Is there any relationship between Message server and Central instance.
    Does CI contains message services and enqueue service...
    plz help me to reslove these issues
    Rgds,
    Edited by: zerandib on Apr 25, 2010 10:45 AM

    *CENTRAL INSTANCE: The SAP Central Instance (CI) is a standalone SAP Basis
    unit which provides services used by clients connected to the SAP system.
    Among these services are the Message server and the Enqueue server, which
    run only on the single SAP Central Instance. The Message server maintains a
    list of all available resources in an SAP system, determines which instance
    a user logs on to during a client connect, and handles all communication
    between SAP instances. The Enqueue server is used by SAP to administer the
    lock table in a distributed SAP system. If the CI
    server hosting the Enqueue service fails, all SAP transaction locks that
    have not yet been committed are lost. R/3 guarantees that no user can
    perform a transaction while the Enqueue service is unavailable in order to
    guarantee database consistency. Placing the Enqueue and Message services
    together on the CI is recommended by SAP since the Message service must
    always access the Enqueue service for inter-process communication. These
    services provide critical SAP functions that, by existing only in the SAP
    Central Instance, suffer from being a single point of failure in the SAP
    environment. Obviously, the CI, which contains the Enqueue and Message
    services, needs to be restarted as quickly as possible following a failure
    so that normal operations can resume.*
    Central Instance Has Message server and an enque work Process,
    Application Server or dialog Server : Does not have message
    server but have work process to reduce the Load on CI*

  • Migrate Central instance from 32-bit to 64-bit

    Hi All,
    We have SAP in Distributed Environmnet( Central Instance running on 32-bit windows & Database instance is running on 64-bit AIX).
    Since there are lots of memory dumps , we have decided to upgrade Central instance from 32-bit to 64-bit windows.
    We don't want to disturd database instance as it is alredy running on 64-bit.
    Please share your thoughts to accmplish this task.
    Thanks in advance
    regards
    Venu

    Ah ... during this migration, it'd also be nice to migrate your CI to a virtual name.  This way, for future migrations, you won't have to change the profiles.
    If you decide not to migrate to a virtual name, then make sure you adjust the default and instance profiles to reference the new server name for CI.
    If you decide to migrate to virtual name ...
    1.  Assign 2nd static IP to your server.
    2.  Insert your virtual name in the following registry and reboot:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0 > create new multi string variable with name "BackConnectionHostNames" and put as value the virtual name.
    yourHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters > create new multi string variable with name "OptionalNames" and put as value the virtual name.
    3.  Adjust the c:\windows\system32\drivers\etc\hosts to include mapping of 2nd static IP to the virtual name.
    4.  Map your virtual name to the secondary static IP in WINS.
    5.  Make sure you rebooted the server.  Log into the server and do a "net view virtualname" and "net view physicalname", both should be successful.  Do not continue until this is successful, most problems are caused by DNS vs WINS, some corporations need the mapping in DNS and not WINS, some the otherway around.
    6.  Change the user variable to include SAPLOCALHOST and SAPLOCALHOSTFULL, set both to the virtual name.
    7.  Adjust the start and instance profile of the CI to include SAPLOCALHOST and SAPLOCALHOSTFULL.
    8.  Cycle the SAP NT services to make sure the new user variables are adapted.
    9.  Adjust all default and profiles to adapt to the new CI.
    10.  Adjust STMS to use new CI name.
    And, you can also migrate DB to a virtual name as well using the same registry entries.  Except DB name doesn't require it's own IP, so it can share the same IP as the physical server.  Adjust the user environment variables and SAP profiles afterwards to adapt to new virtual name.

  • Re: User Session using ServletSession and Stateful EJB in Cluster

              Sorry , I didn't use WLS 6.0, we use wls 5.1 in production.
              But in Wls 6.0, in some situations , the state of the stateful session bean can be lost. So it's not so reliable. You have to deal with it in the client code. Instead, servlet is a reliable solution.
              In order to test under wls6.0, you can store the handle of the EJBObject in the HttpSession, not in jndi, cos if the instance fails, all its objects will be removed by remaining instances from jndi. In another instance, you get the handle, and try to get the EJBObject.
              In wls5.1, some information like the server url must be embeded inside the handle. But in wls6.0, I don't know how they deal with it.
              I am looking forward to your results
              "Anuj Soni" <[email protected]> wrote:
              >
              >What kind of clustering problems you had with WL6.0 for Stateful session beans ? It will be helpful for me to know before hand.
              >
              >BTW, how were you able to test stateful session beans in a cluster under WL6.0 i.e. were you storing the Handle or EJBObject in HttpSession or did you store it in JNDI ?
              >
              >Thanks,
              >
              >Anuj
              >"Tao Zhang" <[email protected]> wrote:
              >>Although it's very advanced to take advantage of both http session and
              >>stateful session bean replication, but if you rely on the stateful session
              >>bean's state, you will be in trouble. Because the support of stateful
              >>session bean's replication is not perfect in wls6.0. We already chaned
              >>almost all stateful session beans into servlets or entity beans.
              >>
              >>I am not sure about the handle of the EJBObject. I think it should be able
              >>to reconstruct for us otherwise we can't use the handle any more.
              >>
              >>You can do a test. BTW, could you tell me the result?
              >>
              >>Thanks.
              >>
              >>Anuj Soni <[email protected]> wrote in message
              >>news:[email protected]...
              >>>
              >>> Hi,
              >>>
              >>> I am designing the workflow for my web application using a Stateful
              >>session bean. As Weblogic 6.0 supports clustering of stateful session bean
              >>and HttpSession(in-memory replication), I want to use the combination of
              >>both techniques to provide load-balancing and fail-over safety for user
              >>sessions and their corresponding workflows.
              >>>
              >>> The question I have is that, Is Handle obtained using
              >>EJBObject.getHandle(), fail-over safe (for a clusterable stateful bean), so
              >>that I can reconstruct the reference to EJBObject on the secondary server
              >>incase of primary server crash.
              >>>
              >>> My understanding is that I should store Handle in the HttpSession as it is
              >>Serializable not the EJBObject. The weblogic 6.0 document only talks about
              >>the replica-awareness of EJBObject.
              >>>
              >>> If my above assumption is incorrect, Can you tell me how else I can
              >>achieve my goal ?
              >>>
              >>> Thanks in advance.
              >>>
              >>> Anuj Soni
              >>
              >>
              >
              

    Any one tested this scenario yet? i.e: storing the handle to an EJB object and then trying to re-use after the HttpSession is restored?
              Thanks.
              

Maybe you are looking for