Should Verizon provide a roll back option from the gingerbread update?

Simple and straightforward. Do you believe That verizon should provide a rollback option from the gingerbread update?
My vote would be Yes.
Here is some reasons why
1 First and foremost the update should not have been forced.
2 When making significant changes to the operating system like gingerbread has Motorola should have the decency to contact Droid owners And inform them of the changes they attend to make.
3 The update wasn't really necessary.
4 ethically I believe that verizon should provide a roll back option.
5 regardless of what the fine print says in the contract just because something is legal to do doesn't mean it is ethical to do.

Talk about beating a dead horse.......
I was President of the GB Sux Club after it came out. At least a dozen bugs and glitches were created after I installed it.
But, you know what?
In the weeks that have followed, as apps have been updating (you should check the Market for available updates if you don't have them set to auto), and I check daily, something interesting has happened.
Most of the bugs and glitches have mysteriously gone away.
Is/was GB the "problem"? It wasn't perfect, but it wasn't the problem.
After GB, my phone did and does bizarre things from time to time that makes me wonder how they could be caused by a conflict the O.S. is having with a 3rd party app.
The 3G dropping issue notwithstanding.
There are some issues, yes. But, I contend apps are the main "problem".
Can going back to Froyo (if it were possible) do more harm than good, if 3rd party apps are updated for GB? That's above my pay grade.
I did a reset after GB and it solved nothing. I defiantly refused to un-install all apps, or reboot in Safe Mode.
I did NOTHING but let the developers update their apps and right now, my phone is largely bug and glitch free, again.
In politics, there was the saying, "It's the economy, stupid". In Android, "It's the apps, stupid". (Not speaking to anyone in this forum).
Yes, the evil empire has it right when it comes to the stranglehold they have on which apps are allowed on their tiny iphones.
But, you know what? If, OEMs did the same, the Android experience wouldn't be the frustrating situation it is at times, ESPECIALLY after EACH update.
In my opinion.

Similar Messages

PLZ helpppppppppppppppppppppppp want to roll back "active" of the recovery partition...

Hi,
I need serious help,,,,,,any help is appreciated :
--- I believed my second hard drive is burnt , but it was not ( not able to access it, it was because i had changed the workgroup in NTFS),
--- at this stage my windows 7 would boot normally , but like a new user, no access to previous files
--- so tried to do restore,    F11 showed there were no previous saving for restore
--- tried to do recovery , F11 showed that "restore" botton is gray/ inactive
--- someone on internet suggested to make the recovery partition , "active", so i did it through disk management
--- then when windows boot up, it went directly to previous recovery page with inactive botton,, i can not access my previous windows , i can not boot up to windows again
--- so now it boots up and goes to useless recovery page
--- through bios activated "HP Quick web" , and playing with photo viewer in quickweb i noticed all my files on the "maybe burnt drive" are all there!!!!    and i can view them,,,,,,,   ooops!!! my whole problem was changing windows group!!
---   so if i can just boot to previous windows , then i can change the group and access the files...but
--- now i cant go out of recovery page,,,,, now that it is "active partition" everytime i turn on computer is JUST goes to recovery page screen (which is inactive),,,,,,,,,,,,,,,,,,,,,,,,,,
--- how can i roll back, or inactive the recovery partition and use my drive "C" previous partition as the only active one
I dont have recovery CD (I will get it tomorrow, i ordered it by HP, 30 bucks! phewww),,,,,,,,,
i am panicked any help would be deeply appreciated.........................................................
HP Pavillion DV-7 4069
Windows 7 Home Premium

Hi,
If you don't already have one, use another PC to create a Windows 7 Recovery CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD. Once created, or if you already have this, insert the CD and restart to boot from it. Select the Repair option.
Select the 'Repair your Computer' option and follow Option 2 in the guide on the link below to run Start-up Repair – you may need to run this 2 or 3 times.
http://www.sevenforums.com/tutorials/668-system-recovery-options.html
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

IPhone 4S has not been backed up from the time I purchased it

Dear All,
To my recent notice, my iPhone 4S has not been backed up from the time I bought it (4 months ago). After which everytime I go into the <Back-up now> option, it says that 'Last backup could not be completed'. Any suggestions on solving this please
Also the Apps I have on my iPhone 4S doesn't appear on my iPad 3.. What could I do to solve these issues? Please help!!
Thank you..
JCP

Jasper C Paul wrote:
Dear All,
To my recent notice, my iPhone 4S has not been backed up from the time I bought it (4 months ago). After which everytime I go into the <Back-up now> option, it says that 'Last backup could not be completed'. Any suggestions on solving this please
Not with they limited information you have provided so far. Are you backing up to iCloud or to iTunes on your computer? Do you have the latest version of iTunes on your computer? Was it installed from a Windows or Mac user ID that had administrator privileges? Does the phone show up in iTunes? What is your operating system? Are you using a USB port directly on your computer (not a hub)? If it's a USB port on the computer and you have a desktop or tower computer is the port on the back, not on the front?

Errors (-50) occured when i was using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in my iTunes application on my computer.

errors (-50) occured when i was using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in my iTunes application on my computer.
what is it?

Quoted from the link I provided you with, in your other post.
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista:  \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7:  \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP:  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.

My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premier

My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!

Hi Bryan,
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
Hope that works for you.
Kevin

I just did a system restore on my iphone 4 and it didnt prompt me to restore a back up. how do i restore a back up from the icloud now?

how do i reload a back up from the icloud when i wasnt prompted?

If you apps are still in iTunes, you should be able to sync them back to your computer. Otherwise, if you have iOS 5 (5.01) on your phone you could redownload them by launching Apps, press the Purchased button at the bottom, press Purchased at the top, then Not On This Phone. This will list your apps and allow you to redownload them. If you've purchased apps using multiple Apple IDs, you will have to sign in to each of these IDs to be able to download all your apps (by going to Settings>Store>tap on the Apple ID, sign out, sign back in using another ID).

Regarding roll back and reassign the value.

hi all,
i am using forms6i.
Re: how to avoid the form's message situation
as we discussed my process has to happen like this. since it is a new topic so i have raised new thread.
what i want to do is based on the input values(base table values) i have to call one procedure, the procedure returned value i have to assign to one of my database field and one new record should go into other table.
so what i am doing is at the key-commit trigger i have written a procedure inside that i am calling a procedure which results in one value which i have to assigned to my blocks item. and one record to the table
my code in key commit trigger is something like
go_block('block name');
first_record;
based on the forms parameter call procedure
if procedure returns error then rollback otherwise assign value to base table item and one record to other table so
job_proc();
:block.item:= output ;
insert into job_table() values();
if system.last_record = 'TRUE' then
exit
else
next_record;
end loop;now senario is like if i am in fifth record four record processed as i explained before. in fifth record if i am getting error means
all four records value and insert statement should be reassined and rolled back.
so i have written like
exception when others then
forms_ddl('rollback');
go_block(block name);
go_record(system.current_record);
:block.item := null;
if :system.trigger_record = 1 then
exit;
else
previous_record;
end if;
end loop;is this is the way to rollback or is there any better way?
please advise.
Thanks..

Hi,
Check these files on rollback and commit:
Transactional Behavior of an Integration Process:
http://help.sap.com/saphelp_nw04s/helpdata/en/45/058023846b2460e10000000a1553f7/frameset.htm
Commit Handling:
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/814d3ccd6fba74e10000000a114084/frameset.htm
Rollback:
http://help.sap.com/saphelp_nw70/helpdata/en/23/5f5fd653b6f64d9bb0b468a8689838/frameset.htm
Regards,
Subhasha

Remove 'Make At' Type option from the Sourcing Rules Form

Hi Gurus,
I want to remove/ disable/ freeze the 'Make At' option from the drop down list of 'Type' field under the Shipping Organization block in the Sourcing Rules form. I request you to please reply me back with the solution/ options. I'd really appreciate.
Thanks in advance !!
KM
Edited by: 892964 on Nov 21, 2011 8:30 AM

You can create a quick when-validate-record personalization that displays an error message if type = Make At
Hope this helps,
Sandeep Gandhi

How do I remove the "Dock" option from the Apple Dropdown Menu

I work for a school district where I am continuosly having to go back into Mac labs and reverting the settings on the dock back to normal. Students are changing the size, position and content of the dock, as well as hiding the dock. These computers are used by students k-6 and the younger children are getting confused when they com in and they cannot find the dock or its not where it is supposed to be. I have been able to lock the sizing, position and content of the dock but am not finding a way to elimante the hiding of the dock. Preferably I would like to remove the "dock option from the Apple dropdown menu. Please help!!!!

This question was asked quite a while ago and the suggestion was to use Server Admin Tools, which I know nothing about. You'll have to look into that. If these Macs are running off a server, then this might work for you. I'm seeing that Server Admin Tools from Apple is still current.
https://discussions.apple.com/thread/287704?start=0&tstart=0

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

I can using AirPrint from safari and email to my hp printer but do not get print as an option from the pulldown menu from the new york times and other apps. How can I print directly from these apps?

I can't seem to print directly from apps like the new York times. Print is not an option from the pulldown menu. Print to my hp printer works fine from safari and email though and from some other apps. Do some apps not permit printing? That doesn't right.

sadie1 wrote:
Thats funny. If go to ny times on safari therebis a print icon and no problem printing. On the app -- and I am a paid subscriber -- no print option ...
You can ask the NY Times why not.
Standard behavior is that Airprint always works with iBooks, Mail, Photos, and Safari. Apps are up to their author.
http://support.apple.com/kb/ht4356

Attachment list option from the GOS

Hi freinds
We have a custom Transaction for which we have activated the GOS icon on the screen. We have that icon and we care able to save the document to the Content repository fine.
The issue is immediately after attaching the documents, if you use the
" Attachment list" option from the GOS menu, it brings the attached documents.
But if you leave the transaction and get in for the same document, the same function is not working.
In what basis i have to save the document...
Kindly pl throw in your ideas on this issue.
Thanks
deva

Hi Kruthika,
Here iam explaining how i resolved in my case
i created a database table with the selection screen values
if i attach any document in the GOS menu than keep a save button and write logic for save button to save the selection screen values in database table
than after that if u see tha attachments again give another button like GET if u give any value which is in database tabel than press get it will get the all selcetion screen values and the attachmentts
Note:Just iam explained what i did but i dont know what is ur requirement exactly
if u come with ur requiremnt than we will help u
Thanks
Surendra

HT4946 i locked my new ipod touch and cant it back open from the computer help.?:(

i locked my new ipod touch and cant it back open from the computer help.?:

First:
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with defect cables
- Try another charging source
- Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
If you get it to charge then:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

HT1420 I have looked everywhere on the menu for this and i cannot locate. From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu). Please HELP!!!

I have looked everywhere for this but cannot locate "From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced Menu" Please help!! I have been on every iTunes store menu and cannot find "Authorize This Computer"

On your Computer...
Open iTunes...
If you're using iTunes 11 click on the box icon in the top-left corner to see the " Show Menu Bar "
and from the Menu Bar select Store...
From the Store menu, choose Authorize This Computer.
When prompted, enter your Apple ID and password, thehen click Authorize.

De-Activating the 'Change Query' option from the Bex Menu

Hi,
I want to deactivate the button 'Change Query' in BEx Excel. I have the restricted the user for not to change the query through PFCG. When the user selects this option, a error message 'You do not auth. for change' is displaying but he can view the query and also the formulas which are written in the query.
I want to avoid the user to see the formula and details in the query.
Can anyone help in deactivating this option from the menu.
Thanks
Ramesh Ganji

hi,
check if helps
Bex Analyzer Toolbar in Excel
Disable or remove "Business Explorer" in the menu bar

Should Verizon provide a roll back option from the gingerbread update?

Similar Messages

Maybe you are looking for