Should we be concerned about this?

We were reading about this virus that effects 10.5.6 here.
Should we be concerned about it? How real is it? Thanks.

No viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions.
It is possible, however, to pass on a Windows virus to another Windows user, for example through an email attachment. To prevent this all you need is the free anti-virus utility ClamXav, which you can download from:
http://www.clamxav.com/
However, the appearance of Trojans and other malware that can possibly infect a Mac seems to be growing, but is a completely different issue to viruses.
If you allow a Trojan to be installed, the user's DNS records can be modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's (that's you!) DNS records stay modified on a minute-by-minute basis.
You can read more about how, for example, the OSX/DNSChanger Trojan works here:
http://www.f-secure.com/v-descs/trojanosxdnschanger.shtml
SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
http://macscan.securemac.com/
The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X and allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
(Note that a 30 day trial version of MacScan can be downloaded free of charge from:
http://macscan.securemac.com/buy/
and this can perform a complete scan of your entire hard disk. After 30 days the cost is $29.99. The full version permits you to scan selected files and folders only, as well as the entire hard disk. It will detect (and delete if you ask it to) all 'tracker cookies' that switch you to web sites you did not want to go to.)
A white paper has recently been published on the subject of Trojans by SubRosaSoft, available here:
http://www.macforensicslab.com/ProductsAndServices/index.php?mainpage=document_general_info&cPath=11&productsid=174
Also, beware of MacSweeper:
MacSweeper is malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer. It is the first known "rogue" application for the Mac OS X operating system. The software was discovered by F-Secure, a Finland based computer security software company on January 17, 2008
http://en.wikipedia.org/wiki/MacSweeper
On June 23, 2008 this news reached Mac users:
http://www.theregister.co.uk/2008/06/23/mac_trojan/
More information on Mac security can be found here:
http://macscan.securemac.com/
The MacScan application can be downloaded from here:
http://macscan.securemac.com/buy/
You can download a 30 day trail copy which enables you to do a full scan of your hard disk. After that it costs $29.95.
More on Trojans on the Mac here:
http://www.technewsworld.com/story/63574.html?welcome=1214487119
This was published on July 25, 2008:
Attack code that exploits flaws in the net's addressing system are starting to circulate online, say security experts.
The code could be a boon to phishing gangs who redirect web users to fake bank sites and steal login details.
In light of the news net firms are being urged to apply a fix for the loop-hole before attacks by hi-tech criminals become widespread.
Net security groups say there is anecdotal evidence that small scale attacks are already happening.
Further details here: http://news.bbc.co.uk/2/hi/technology/7525206.stm
A further development was the Koobface malware that can be picked up from Facebook (already a notorious site for malware, like many other 'social networking' sites), as reported here on December 9, 2008:
http://news.bbc.co.uk/newsbeat/hi/technology/newsid_7773000/7773340.stm
You can keep up to date, particularly about malware present in some downloadable pirated software, at the Securemac site:
http://www.securemac.com/
There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac, and alternatives will probably appear in the future. In the meantime the advice is: be careful where you go on the web and what you download!
As to the current 'Conficker furore' affecting Intel-powered computers, MacWorld recently had this to say:
http://www.macworld.co.uk/news/index.cfm?email&NewsID=25613
Although any content that you download has the possibility of containing malicious software, practising a bit of care will generally keep you free from the consequences of anything like the DNSChanger trojan.
1. Avoid going to suspect and untrusted Web sites, especially *********** sites.
2. Check out what you are downloading. Mac OS X asks you for you administrator password to install applications for a reason! Only download media and applications from well-known and trusted Web sites. If you think you may have downloaded suspicious files, read the installer packages and make sure they are legit. If you cannot determine if the program you downloaded is infected, do a quick Internet search and see if any other users reported issues after installing a particular program.
3. Use an antivirus program like ClamXav. If you are in the habit of downloading a lot of media and other files, it may be well worth your while to run those files through an AV application.
4. Use Mac OS X's built-in Firewalls and other security features.
5. Stop using LimeWire. LimeWire (and other peer-to-peer sharing applications) are hotbeds of potential software issues waiting to happen to your Mac. Everything from changing permissions to downloading trojans and other malicious software can be acquired from using these applications.

Similar Messages

  • My iPhone sometimes gets really hot, especially when I charge it. Should I be concerned about this?

    My iPhone sometimes gets really hot, especially when I charge it. Should I be concerned about this?

    Yes. Try a different electrical outlet or computer and a different USB cable.

  • Should I Be Concerned About This?

    When I open the Console, I always get this information. Is this something about which I should be concerned?
    2007-10-31 20:24:23.902 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.937 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.942 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.946 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.948 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.951 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.954 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.957 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.960 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.963 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.965 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.969 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.971 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.974 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.977 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.982 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.985 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.989 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.992 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.995 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:23.998 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:24.001 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:24.003 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:24.006 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:24.009 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'
    2007-10-31 20:24:24.012 SyndicationAgent[200] WARNING: BestCalendarDateFromString - can't interpret: 'Wed 31 Oct 2007 13:55:30 -800'

    It would seem you may have issues with files in the Receipts folder for your Flip4Mac software. Try downloading and reinstalling the latest version.

  • Should I be concerned about this? -- CS6 Installation

    it says the installation is complete but that some items could not be installed successfully. this is the error message:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DF029, DW024 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s), 2 warning(s)
    WARNING: DW024: The payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 requires a UI parent with following specification:
    Family: Photoshop
    ProductName: Adobe Photoshop CS6 Core_x64
    This parent relationship is not satisfied, because this payload is not present in this session.
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1310.Error writing to file: C:\Program Files\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\AMD64\ADREGP.dll.   Verify that you have access to that directory.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1310.Error writing to file: C:\Program Files\Adobe\Acrobat 10.0\Acrobat\Xtras\AdobePDF\AMD64\ADREGP.dll.   Verify that you have access to that directory.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    Should these errors matter much for running the program??
    HELP!

    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Mylenium

  • Should I be concerned about this console message regarding Flip4Mac?

    I have a late 2007 intel imac with 10.6.8. I notcied for the last two days that I have gotten this message after checking Software Update
    2/21/12 2:09:55 PM Software Update[343] PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    2/21/12 2:09:55 PM Software Update[343] PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    2/21/12 2:11:26 PM Software Update[343] PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac QuickTime Components.pkg
    2/21/12 2:11:26 PM Software Update[343] PackageKit: *** Missing bundle identifier: /Library/Receipts/Flip4Mac Web Plugins.pkg
    I have had problems with occasional freezing/crashes where I have to do a hard shutdown, especially after watching videos via safari (e.g. Youtube) and/or the imac  coming out of sleep. This hasn't been too problematic laterly compared to the past (maybe once or twice a week now v. once or twice a day). I do not know if this freeze/crash issue has anything to do with this console message.

    It would seem you may have issues with files in the Receipts folder for your Flip4Mac software. Try downloading and reinstalling the latest version.

  • Should I be concerned about heat??

    Hi, My macbook gets quite hot and is almost unbearable on the lap. Should I be concerned about this? I have heard about this issue and I wanted to know if it can be ignored.

    Mine averages about 160F inside, so the case is bound to get quite warm. Use an insulator between your lap and the MacBook. I bought this EZ Laptop Riser for my MacBook. Works great on your lap. It's well built, keeps your lap cool and helps dissipates some of the MacBook's heat.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
     An Apple User Group 
    ITMS: MacOSG Podcast
    Note: I receive no compensation for product endorsements.

  • I cannot highlight more than one e-mail.  I am concerned about this when I am in the Junk mailbox.  I do not want to open any e-mails that are in this mailbox.

    I cannot highlight more than one e-mail.  I am concerned about this when I am in the Junk mailbox.  I do not want to open any e-mails that are in this mailbox.

    Two thoughts:
    1.  You never need to open any emails in the junk mailbox.  You can simply do Mailbox > Erase Junk Mail from Mail's menu.
    2.  What happens if you hold the shift key after highlighting the first in a series of emails, then click the second one with the shift key depressed?  That should hightlight both.

  • HT1338 I have bought a Mac i7 3 days ago and i can hear a weird noise in intervals like some sort of blowing sound ; is it normal or should i be worried about this ? please advise .. my model is i4 13 inch mac pro .. thanks in advance!!

    I have bought a Mac i7 3 days ago and i can hear a weird noise in intervals like some sort of blowing sound ; is it normal or should i be worried about this ? please advise .. my model is i4 13 inch mac pro .. thanks in advance!!

    We have a MacBook Pro and it is usually quiet, but it sits in a stand to allow air under the bottom.
    Just my opinion, but based on experience.
    You are still eligible to purchase the longer term AppleCare warranty I think (3 years if my memory is correct). While it is an expense that you may never need, in my opinion, it is cheap insurance based on the cost to repair computers. I buy it and more than once it has paid for itself many times over. Not that Apple products are bad, but electronics do weird things at times.

  • Should I have concerns about the integrity of Best Buy's Mac sales?

      I bought my iMac OS X, Early 2008 Model from a Best Buy store. I was a naive & pensive 1st time [ever] PC buyer. The sales [kid] led me to an iMac that had been returned, and referred to it as an "open box sale." I was re-assured the Mac had been completely "wiped clean of all..." After setting it up at home, I found out different; and the previous owner had it for 4 months! Earlier at B.Buy the sales kid told me after asking "why was it returned?" His reply, "Because the screen was too big." His answer certainly didn't make sense to me then, or when I discovered [at home] that it took the 1st owner [him] so long to decide it wasn't what he wanted. So I packed up my Mac & returned to the B.Buy store to have everything cleared.
      I knew I had a lot of trial & error lessons on my hands, not being a computer literate person, but evidently I like a good challenge; and that it has been! No complaints; at first I was concerned about 'doing something wrong'. I was re-assured by the Geek Squad, "You can't harm it; just explore your Mac to get to know it." Well, needless to say, not being able to follow instructions in Owner's Manuals, I'm more of a "slowly SHOW me HOW TO, and what's what" type of learner. I had to Google everything pertaining to PC terminology, steps on how to download & install, files, folders, using delete/trash, keeping all in place/order and NOT duplicating [and which one to keep if I did!] Please don't think I'm stupid; my Mac has been properly stored for 6 years, minus 8 months. I was not in the position in my life to have it set up in a secure environment. Since Jan 2014, my Mac & I have spent many hours, equalling weeks & months face-to-[screen] face!
      I've had many problems since installing OS X Mavericks 10.9.4; and was very apprehensive updating due to the many unfavorable Reviews I had been researching. But I couldn't keep ignoring Apple's repeated recommendations of keeping every item updated. So I eventually found my way to all info, ON ONE PAGE! Yipee! I could not believe what I was reading! Even though I was aware my APPLE apps, plug-ins, utilities, etc. were not auto updating [set to do so]. I FINALLY found my Mac's PROBLEM. My main software, Snow Leopard (10.6.8) is GROSSLY OUTDATED! I totally spaced that due to my Mac being packed away for so long. So I'm working on that. I'M SHARING all MY INFO hoping to help other's who are at my technical level. SO all YOU COMPUTER WHIZZES can SCOFF, GIGGLE all YOU WANT . I take no offense, I'm kidding ☀️. 
      BUT!! Since learning how & where to navigate through the system's files & such, and seeing documents, folders and files that strike me as odd, I have a NAGGING ITCH something is there from the ORIGINAL OWNER. He CREATED SOMETHING, a way into my system, CURRENTLY. I've had to Google 'plist names', and with the help of a very longtime good Facebook friend in New York State, I am learning more from his knowledge & advice. ALL my APPLE security settings are set-up, deny's & allows, and I'm not downloading Videos from MeTube , or anywhere else for that matter. I only download SAFE game apps, and I'm the ONLY user. ANY IDEAS or SUGGESTIONS COMP WHIZZES? Besides updating my software; I'm just trying to find out [on that subject] if I have to buy, download/install all Software Programs of past to be able to run the current OS X Mavericks? Which I read already has a 10.9.5 version. I wanted to become a part of the "Preview Program" for Yosemite; but nope, I cannot! 
    REASONS for MY PREVIOUS OWNER Concerns: My system got so bad, while attempting to Chat on fb w/one friend; every letter I typed, the rainbow ball would spin forever, highlight & delete partial words, and would totally crash. I downloaded an anti Virus app for Mac; scanned my system [took forever]; ending w/a report of 55 VIRUSES!! Many files could not be scanned too. My Mac HD Encrypted Logical Partition Drive un-mounted at least two times, and there's one too many files than there should be. But the file name was not shown, only that the count is off. HELP?
    Message was edited by: SFO.13

    While I am no fan of Best Buy and would not buy a lightbulb from them I doubt you issues have anything to do with your iMac and more to do with your lack of experience and simply getting bad advice. Judging by you post I suspect you have loaded your computer down with a lot of crapware and that  has caused it's problems. For example running antivirus apps on a Mac not only is a waste of time, it's a waste of money, system resources and will eventually create more problems that it solves. Please begin educating yourself on the subject by reading Thomas Reeds articles on the subject, Thomas is a frequent and knowledgeable contributor to these forums. You can find his webpage at http://www.reedcorner.net/tech-guides/
    The good news is here are absolutely no, zero, zippo viruses for OS X. There are other types of malware available (for example trojans) however they differ greatly from viruses in that the use has to download and install them, whereas viruses do not work that way. OS X is not like MS Windows and is extremely secure.
    My suggestion at this point would be to clean your computer of the crapware (including antivirus apps) however before doing so please download and install EtreCheck and post its report. Then we can see how your computer has been configured and begin to give you some advice on the next steps.

  • Should I be concerned about shared_pool_size=0

    Hi there,
    Totally Oracle noob here, be gentle :)
    I have an issue I'm trying to debug on Oracle 10G Express (mentioned in another thread on this forum) and after a bit of googling I ended up issuing:
    SQL> show parameter shared
    which told me:
    NAME TYPE VALUE
    hi_shared_memory_address integer 0
    max_shared_servers integer
    shared_memory_address integer 0
    shared_pool_reserved_size big integer 9227468
    shared_pool_size big integer 0
    shared_server_sessions integer
    shared_servers integer 4
    Is there anything there that should cause concern. The reason I ask is that the problems I'm having may be related to memory - and shared_pool_size=0 seems like a bit of a red flag y'know.
    So, simple question, is there anything here to be concerned about?
    thanks
    Jamie

    Centinul wrote:
    What's the value of SGA_TARGET? A SHARED_POOL_SIZE of 0 can indicate you are using Automatic Memory Management, where Oracle sizes the various components dynamically. Check out the V$SGASTAT view for the current sizes.
    HTH!Hi there,
    Aha, OK, checking that out:
    SQL> select * from V$SGASTAT where lower(name) like '%sga_%';
    POOL NAME BYTES
    shared pool sga listelement 1024
    shared pool SGA Obsolete Param Source 16
    shared pool SGA - SWRF Time Model Bas 64
    shared pool LRMPD SGA Table 77392
    shared pool qm_init_sga:oidctx 4
    shared pool sga node map 8
    shared pool SGA - SWRF Metrics ksuTim 1208
    shared pool KSFD SGA I/O b 3977128
    shared pool SGA structure for SWRF (K 216
    shared pool SGA - SWRF Metrics WCTime 1208
    shared pool kolfsgi: KOLF's SGA initi 4
    POOL NAME BYTES
    shared pool SGA - AWR Metric RBSM str 196
    shared pool SGA - SWRF Metric Eidbuf 60676
    shared pool SGA - SWRF Metric CHBs 365644
    shared pool qm_init_sga:qmdpsg 800
    shared pool SGA struct - SWRF Metrics 1500
    shared pool SGA Param Source Table 176
    shared pool SGA structure for kelr 1180
    shared pool ksws RLB SGA ctx 20
    shared pool channel sga anchor 184
    shared pool sga dev dict 36
    shared pool qm_init_sga:origroot 56
    POOL NAME BYTES
    shared pool qmcInitSGA:qmsga_acl_prop 32
    shared pool kolbsgi: KOLB's SGA initi 4
    shared pool SGA - SWRF RawMet Runtime 3248
    shared pool qm_init_sga:rootname 4
    shared pool SGA param ownership table 176
    shared pool SGA - SWRF DrvMet Runtime 4928
    shared pool slave class sga anchor 48
    29 rows selected.
    I'm not seeing anything there akin to SGA_TARGET. Have I misunderstood? Also, what does SGA stand for?
    Thank you for the reply Centinul, I'm afraid I may need to be taken through this one step-by-step :)
    Regards
    Jamie

  • Should I Be Concerned About My Hard disk?

    Hey,
    This is probably really stupid to ask, but I have a question about the Hard Disk on my MacBook... I just bought it the other day and knew it was a 60GB MacBook when I bought it. As of right now it has around 38.74GB available, but that number seems to fluctuate throughout the day. So, I'll be using it and it will be at 38.8GB, goes down to the 38.74, but after I shut it down for the night and I turn it back on in the morning, it's back up to 38.8GB. Is this normal or should I be concerned?
    Thanks in advance...

    In your utilities folder there is an application called Activity Monitor. It will show you a pie chart of your drive as to what is free and used.
    A lot of space is used up out of the box by things like Garage Band loops, the Jingle library, iDVD, iWeb, and iMovie themes, etc. If you never plan on using some of these you can do a re-install of the system from the DVDs and select custom at the very end to uncheck them. Also there are language translations, printer drivers, etc.
    If you want a more granular approach to finding what space is used on your drive how, then you want WhatSize.

  • I allowed PC Update Support  to take over my computer. When they were off I checked them out and    discovered they were most likely scammers.  I ran my antivirus program and changed password but should I be concerned about installed malware?

    I allowed PC Update Support to take over my computer (long story) When they were done I checked them out and discovered they were most likely scammers. I ran my antivirus program and changed passwords. Should I be concerned that they may have installed malware?

    If you are sure they were scammers the only way to be 100% sure they left nothing behind is to wipe your system disk, do a clean install and restore from a backup you are sure was made before the scammers got onto you system.
    There is no other way to be sure that thye did not leave somehting behind. In addition if you have used any credit card numbers while on the system, back account (or any other) passwords, tax returns, etc. You need to be alert fo IIdentity Theft | Consumer Information. It may be a good idea to place a fraud alert with one of the credit reporting agencies (the link above will detail what to do)
    And of course change the passwords right away.
    good luck
    Message was edited by: Frank Caggiano - This assumes you are in the States. Different procedures may apply in other countries.

  • Should I be concerned about these permisions?

    Hi,
    As I keep trying to avoid the kernel panics in my MBP, everytime I run repair permission I get the following:
    Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/AppleProResDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    No matter how many times I repair permissions, the same thing keeps popping up. Should I be concerned?
    Thanks..

    No, that's fine. Permissions Repair in Leopard is somewhat 'broken'.
    http://support.apple.com/kb/TS1448
    If you uncheck the Show Details box, those minor (unrepairable) errors won't show up, only major ones.

  • After clicking "close" X, a message appears then disappears too quickly to read. It begins "Firefox will close now..." The word "security" appears in the next line. What is the rest of this message and should I be concerned about "security"?

    none further

    The full message that was almost impossible for me to read was: “'''Firefox will close now. Please standby while BetterPrivacy checks your hard disk for LSO cookies…'''”
    To see if your message is the same or different:
    1. Open Firefox
    2. Press and hold the Shift key with your left hand
    3. Close Firefox
    4. Then, as soon as the message appears, press the Print Screen key with your right hand
    5. Open the Microsoft Paint program, go to the Edit Menu and press Paste
    6. A box with the full message should appear. If not, continue to open and close Firefox and hit Shift/Print Screen until you time it just right and the message will appear when you paste it into Paint
    There would not appear to be any security concerns with the message posted above
    There may be security concerns if your message is different.

  • Hello. I recently installed a new SSD on my macbook pro (mid2009 running mavericks). Now after booting up the text editor automatically pops up on the desktop with the header quopri_codec.py What is this and should i be concerned about it?

    here's the script in full:
    """Codec for quoted-printable encoding.
    Like base64 and rot13, this returns Python strings, not Unicode.
    import codecs, quopri
    try:
        from cStringIO import StringIO
    except ImportError:
        from StringIO import StringIO
    def quopri_encode(input, errors='strict'):
        """Encode the input, returning a tuple (output object, length consumed).
        errors defines the error handling to apply. It defaults to
        'strict' handling which is the only currently supported
        error handling for this codec.
        assert errors == 'strict'
        f = StringIO(input)
        g = StringIO()
        quopri.encode(f, g, 1)
        output = g.getvalue()
        return (output, len(input))
    def quopri_decode(input, errors='strict'):
        """Decode the input, returning a tuple (output object, length consumed).
        errors defines the error handling to apply. It defaults to
        'strict' handling which is the only currently supported
        error handling for this codec.
        assert errors == 'strict'
        f = StringIO(input)
        g = StringIO()
        quopri.decode(f, g)
        output = g.getvalue()
        return (output, len(input))
    class Codec(codecs.Codec):
        def encode(self, input,errors='strict'):
            return quopri_encode(input,errors)
        def decode(self, input,errors='strict'):
            return quopri_decode(input,errors)
    class IncrementalEncoder(codecs.IncrementalEncoder):
        def encode(self, input, final=False):
            return quopri_encode(input, self.errors)[0]
    class IncrementalDecoder(codecs.IncrementalDecoder):
        def decode(self, input, final=False):
            return quopri_decode(input, self.errors)[0]
    class StreamWriter(Codec, codecs.StreamWriter):
        pass
    class StreamReader(Codec,codecs.StreamReader):
        pass
    # encodings module API
    def getregentry():
        return codecs.CodecInfo(
            name='quopri',
            encode=quopri_encode,
            decode=quopri_decode,
            incrementalencoder=IncrementalEncoder,
            incrementaldecoder=IncrementalDecoder,
            streamwriter=StreamWriter,
            streamreader=StreamReader,

    Thanks for the info. I'm not really sure how or why this python script is running when my macbook starts up. Any ideas how i can locate the script and stop it from running?

Maybe you are looking for

  • Yosemite error 150:30. Photoshop CS4

    Hard drive was failing so new hard drive and Yosemite. Now I get an error when trying to launch PS CS4. Error code 150:30 Licensing for this product has stopped working. Any ideas? Don't want to upgrade.

  • HT6162 Can't get wi fi or blue tooth on I phone 4 s

    Can't get blue tooth or wi fi on phone

  • ICImagingC​ontrol not appearing

    Hi everyone, I'm writing a program to sample images from a CCD camera using the ICIImagingControl VI that comes with the ACtiveX package. Only problem is the window does not actually appear by default. What I mean is, when I start up my program (just

  • List manager (based on Popup LOV)

    Hi ! I have a problem with my list manager. I'll explain the situation. I have users into my db and does users are associate to many groups. I have a user table, an association table and a group table. I have that LOV query : begin :VALEUR_ACTIVE :=

  • Can not start the listener.

    Hi everyone, I start invoking the command below,I got the following error lsnrctl start C:\Users\Ian Su>lsnrctl start LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 20-JUN-2011 23:25 :32 Copyright (c) 1991, 2005, Oracle. All rights re