Should we rename this forum or add one for CRM 7.0?

Hi Stephen,
Can we have a new forum for SAP CRM 7.0 as well just like we have it for SAP CRM 2007?
Regards,
Harshit

Harshit,
Actually I'm wondering if it would be better to focus this forum more to CRM Webclient UI questions instead of just being CRM 2007. CRM 7.0 is more an evolution of CRM 2007, so the technical question set would just be some additional deltas on top of the questions right now. If you look at the PCUI we don't have a CRM 40 PCUI forum nor a CRM 50 PCUI forum.
So I'm going to make your question a sticky and rename it slightly to see if we can some more thoughts.
My initial proposal would be the following:
Rename this forum CRM Webclient ( CRM 2007 and beyond )
Add a new forum for CRM Middleware questions
After we get some community feedback, I will send in the comments to folks at SAP that manage the organization of these forums If there is a strong opinion to do something, I'm sure they will take a look and make some adjustments.
What do you think?
Thank you,
Stephen

Similar Messages

Is this possible to add one page under 2 tabs conditionally in Oracle 10g

Hello All,
Is this possible to add one page under 2 tabs conditionally.
Lets say i have created one page "Page 1" under "Tab 1". Now i want the same page to be displayed fom another tab also.i.e. from "Tab 2" from the same application.I want to avoid creating copy of this page.
Such that when i am in Tab 1 and going to this page ,the newly created page should show tab as Tab1.Similarly if i am going to Page 1 from Tab 2 ,the newly created page should show tab as Tab2.
What can i do for this.
Thanks
Swapna

Swapna,
For Tab1 and Tab2, set the 'tab page' as 1 under 'current for pages' while you edit the tabs. This would add page 1 under two tabs, tab1 and tab2.
Regards,
Hari

Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

Why does the apps store not accept my ID and password, it works fine to log into this forum and it works for the apple store, but not to log in to buy apps, it just keeps telling me that the id or password is wrong, and I know it isn't

I Just signed in to find the answer to this too. I started having the same trouble today.

Updated: Rename this forum

Hello all,
Originally this forum was intended for ccBPM and Workflow. However I have noticed that 99% of posts are for workflow, and the occasional BPM post isn't answered. The confusion is because BPM is still in the title but I suspect hardly any BPM folks frequent this forum anymore. Or do they?
So I have submitted a proposal in the suggestions forum and invite you to add your comments. If enough people agree then we can get the name changed to SAP Business Workflow. On the other hand if people prefer to see XI/PI/BPM questions in here then we can keep it as is. Or perhaps it should be Workflow and Guided Procedures or any other suggestions?
The proposal is [over here|Rename "BPM and Workflow" forum to "SAP Business Workflow";, please add any comments there.
Cheers,
Mike
Edited by: Mike Pokraka on Oct 1, 2008 4:13 PM

Update:
As most of you have probably already noticed, this forum has been renamed.
Actually, that's not all that happened: a second forum was created as well, so I thought I'd drop a short note here to point out the [announcement|A new forum, and the difference between BPM, BPM and BPM] which also contains a little background on this whole BPM business.
Happy Workflowing,
Mike

I suggest organising this forum by printer supplier for driver issues

Here's a suggestion for the Moderators.
I suggest organising this forum by printer supplier.
A lot of the questions in here are supplier - specific. It would be nifty to be able to either
a). check out general Leopard issues with wireless, set-up, sharing, or
b). go straight to the latest scoop on the issues with Lexmark drivers (or HP, or Brother, or Canon etc.)
Well, why not?

Just a reminder folks, that this board is meant for feedback on the forum itself. Any discussion of Verizon products or services can be posted on the appropriate boards. Thanks!

Does this forum cover UI design for an app as well?

Because the objective is so different web design and UI design are two related topics... I don't seem to see a separate forum for UI design, does that mean this forum would cover app UI design as well?
Thanks.
knowledgenotebook

knowledgenotebook,
I believe the (general) Design forum is a better place to ask (many (of the same) natives turn up both here and there).
http://forums.adobe.com/community/design_development/design

Error in Installation of JAVA Add-in for CRM system

Hi All,
During the installation of Java Core Upgrade 6.20 for CRM, I am encountering problems during the SDM deploymentt stage.
The error is as follows:
<b>
See 'C:\j2sdk1.4.2_08\bin\java -Xmx64M -Djava.ext.dirs="E:\SAPCRMInstallables\J2EE_WAS620\SDM/libs" -jar "E:\SAPCRMInstallables\J2EE_WAS620\SDM/SDM.jar" autoupdate "sdmHome=E:/usr/sap/<SID>/DVEBMGS00/SDM/program" "popDir=E:\SAPCRMInstallables\J2EE_WAS620\SDM"' output in 'C:\SAPinstMSSQLSAPINST\java.log'.
ERROR 2005-08-19 15:05:56
MOS-01012 PROBLEM: 'C:\j2sdk1.4.2_08\bin\java -Xmx64M -Djava.ext.dirs="E:\SAPCRMInstallables\J2EE_WAS620\SDM/libs" -jar "E:\SAPCRMInstallables\J2EE_WAS620\SDM/SDM.jar" autoupdate "sdmHome=E:/usr/sap/<SID>/DVEBMGS00/SDM/program" "popDir=E:\SAPCRMInstallables\J2EE_WAS620\SDM"' returned with '4' which is not a defined as a success code.</b>
Any pointers in solving this problem would be of great help. Thanks in advance,
Regards,
Prasenjit

Please advice if you were able to find a solution.

This has been going one for mo.s, "unresponsive script..blah blah ... chrome.. bp.js:1012 or what ever number it throws. you have nothing i your search access, the chat is closed again

Your info comes back you never heard this, yeah I can
believe you are not listening. But it's been since at least Oct.?
the browser locks up behind the screen, then it pops forward,
with the spinning what ever on my mac ox 4.6 intel duo
condensed its says ---
unresponsive script
chrome bp. js: 1012 (or what ever number) in between their
is a redundant statement, an question --if I wish to wait or quit.
since I am dieing, waiting not so much--this is a you
problem.

Your info comes back you never heard this, yeah I can
believe you are not listening. But it's been since at least Oct.?
the browser locks up behind the screen, then it pops forward,
with the spinning what ever on my mac ox 4.6 intel duo
condensed its says ---
unresponsive script
chrome bp. js: 1012 (or what ever number) in between their
is a redundant statement, an question --if I wish to wait or quit.
since I am dieing, waiting not so much--this is a you
problem.

THIS IS THE RIGHT ONE FOR THE BLUESCREEN (AND NOT THE ONE WITH SPACES!!!!))

1. Reboot into single-user mode (hold Cmd-S while booting machine)
2. Follow the directions OSX gives you when you get to the prompt (I think these were them - just type the two commands it tells you to):
fsck -fy
/sbin/mount -uw /
3. Remove the following files:
rm -rf /Library/PreferencePanes/ApplicationEnhancer.prefpane
rm -rf /Library/Frameworks/ApplicationEnhancer.framework
rm -rf /System/Library/SystemConfiguration/ApplicationEnhancer.bundle
rm -rf /Library/Preferences/com.unsanity.ape.plist
4. Exit, to continue booting normally
exit
so thats all but be sure to type ApplicationEnhancer
instead of Application Enhancer...etc
Job Geheniau Netherlands
[email protected]

BSG is is owned by Universal/NBC, which took their football and went home.

To Adobe : Please add point system to this forum like SAP forum

Adding point system to this forum will encourage and
recognize people who is doing good work in this forum.
Add positive and negative point system.
SDN SAP forum is using point system effectively.
It shows who got maximum point this week, who got maximum
point this month, till today who got maximum points.
Points are give by people who ask questions based on correct
answer. If answer is correct, 1 point is awarded.
wrong answer and arrogant answer -1 point.
We need to recognize people who help others. This will be a
good start to make this forum interesting and user friendly.

Dude wrote:
As far as I understand, the suggestion to get rid of the point system means that there is a problem with people giving bad answers and participating just for the sake of collecting points, and that the overall quality of the forum would improve if there was no scoring system.
I think this is wrong for the following simple reasons:
It takes too much effort to gather the necessary points to eventually create any level of visibility. People who are just after points will loose interest when they realize how difficult it is to get points. It simply does not pay off.
There is no such formula which shows that people who enjoy the scoring system provides bad answers and those who do not provide good answers. I find such ideas discriminating and lobbying.
People have individual motives why they actively participate in the forum. Removing the scoring system will most likely not only affect the desired group of people. It might suit those who think their contributions to the forums are underrated and undermined and hence removing the scoring system removes the evidence.
To my experience, the likeliness of bad answers and possible wrong judgements based on the perceived status of a person may depend on the forum topics and is no real problem. Last not least, there is usually an option to outline wrong answers or judgement, regardless of the scoring system.Your passion towards this community is admirable, and I certainly wouldn't want to alienate those who both enjoy the scoring system and helping others. If it's really that important to some of the experts around here, then perhaps you are right. But, since the issue does seem to be polarized among others that have been around as long as yourself, it seems that the answer is really not so clear-cut. We'll probably just have to agree to disagree on this one.
I marked your response as helpful. ;)

Use Secure HTTPS throughout this Forum and the Meteor Website

This is not a "Bright Idea", this is a security flaw with the setup of this forum. When registering to use this forum you are asked for these personal sensitive pieces of information: - Password- Email Address- Mobile Number- CUSTOMER SERVICE PIN!- Age Confirmation This forum does not use secure HTTPS TLS anywhere, so when you register with this form, and when you login you are sending this information is clear plain text over the Web. This is extremely insecure especially considering (A) It's a known fact most typical users will use the same account password on multiple sites, so one should assume a user registering for this forum will use the same password that they use for the main MyMeteor account. (B) The Customer Service PIN is one of the pieces of information used when interacting with Meteor either by phone, chat, email, forum or post as a way to verify a persons credentials and valid identity. So given (A) & (B) if a users password and/or PIN are intercepted on an insecure internet connection, the person gaining access to these credentials could use it to impersonate the customer when communicating with Meteor. The implications are obvious. When an attacker wants to gain access to customer details they will look for the weekest access link. This forum is one of the weekest access links and if comporimised or if user details are intercepted it gives the attacker all the information they need. This forum may be powered by the Lithium service, but it is Meteor's Technical team's responsibilty to setup and secure this forum adequetly. At the moment they have not done this. They are leaving customers at risk of identity theft and are failing in their obligations under Data Protection laws. This needs to be addressed immediatly. On a wider issue it is now considered good practice for public serving websites to use TLS throughout their website and not just for registration and login pages. Contrary to misconception using TLS throughout your site will not greatly reduce the speed or performance of the site if the sys admins have used correct modern server configurations, optimisations and TLS implementation. The major browsers are now blocking out non-secure elements on secure web pages and even Google is going to start using TLS as a signal for traffic ranking. So websites using TLS throughout their site will potentially get better search rankings on Google than those without. I would ask the Meteor Sys admins to at the very least seurce this forum with TLS and then role out TLS across their entire meteor.ie web properties and follow best practise.

I have found that there is an SSL certificate installed on the server to cover the forums.meteor.ie domain, however it is not being enforced. Whilst not a perfect solution, for those using the EFF HTTPS Everywhere browser extension, I have written a ruleset that will force the browser to load https://forums.meteor.ie. I have submitted this ruleset to the EFF but you can also add the ruleset yourself with this following these directions, using this code: <ruleset name="Meteor.ie Community Forum">
<target host="forums.meteor.ie"/>
<rule from="^http://(www\.)?forums\.meteor\.ie/" to="https://forums.meteor.ie/"/>
</ruleset> Still waiting on an official response from Meteor.

Searches in this forum.

Searches in this forum are never fruitful for me even when I know a topic exists because it's one that I posted. I can enter the entire subject line of my post in the search filed and turn up lots of unrelated posts but the one I was looking for is no where to be found even when it clearly should be right at the top of the list assuming the list is sorted by relevancy and I typed the exact subject line in to the search field. Not a very intuitive style of searching when that can happen. I hope this eventually gets fixed someday.

Hi Matthew!
I found a Topic you started, using the Search Terms "new voices in leopard", and searching your alias for the text field Restrict by Username:.
View the Search Results.
Alternately, using the Search TermS new+voices++in+leopard, with no Username, produces the Same Results.
But I agree with you, that the Search function is very inadequate.
ali b

How tool was used to build this Forum ?

Dear Oracle OTN Team
Cna anybody tell me what tool was used to build this Forum ?
Is it a out-of-the-box tool or itas build by Oracle team for specific use in OTN ?
If this forum program is available for all purpose use , where can I get it ?
I really like to install such forum progrm inside an Oracle Portal application that I'm developing . Is it possible ?
I'd appreciate a lot your reply and colaboration on this matter .
Thanks in advance .
Best regards !
Ricardo

You have apparently purchased a lost or stolen iPhone. The owner's telephone number was given. You should contact the rightful owner about returning it. You should contact the person from whom you purchased it and get your money back. Report all to the local police.

Make this forum also available for those who use others browsers then IE

I can create a message in this forum from IE, but for Chrome it is closed
Success
Cor

Hi Cor,
I'm able to create new threads in other forums with Chrome:
http://social.technet.microsoft.com/Forums/en-US/e4bf5833-895e-4c89-8a96-8ef44b3bae82/test-post-using-chrome?forum=tnsandbox
Is this happening for you across all forums or just in one specific forum?
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

Windows Live Mail ? Links to this forum not working correctly.

I got a new computer running Windows 7 and have been using Windows Live Mail.
This is where I get my e-mails for updates to messages on this forum.
The link for the message thread has a link that includes the # sign with the correct message to go to on the page.
Now with Windows Live when I click the link it leaves the number after the # sign and just goes to the top of the thread instead to the exact comment.
I can copy and paste the link into a browser and it works fine but if I just click it it does not work like it used to with Outlook Express.
Any ideas if this might be fixable.
Thanks: GLenn

I still have outlook express running on my OLD SLOW windows XP
My new Windows 7 only has Windows Live Mail so I have to use it unless I get another program.
I just thought that someone here might have figured it out.
I dont know what the extra part after the # sign is called so i havent been luck searching google for an answer.
Here is the link to your message:
http://forums.adobe.com/message/2965072#2965072
but when I click it it just puts this link in the browser:
http://forums.adobe.com/message/2965072
it does work but just takes me to the top of the thread.
Im not sure why it doesnt use the part with the # and number that follows it.
It does see it and if hover over it it sees the whole link.
Just something new to figure out.
I will try a Windows Live Forum too but if anyone knows any hints that would be great too.
Thanks: GLenn

Should we rename this forum or add one for CRM 7.0?

Similar Messages

Maybe you are looking for