Should you use a time capsule with an ASDL router?

I appear to be having problems intermittently. Is it possible that the time capsule is clashing with the existing router? We now have two separate wireless networks one based on the router and one based on the time capsule. What is the correct configuration to get the best out of this equipment?

The 'correct' configuration is to change the TC's WiFi name, password and security type to exactly the same as your existing router.

Similar Messages

  • How to use the time capsule with my existing router?

    Here is my situation. I have Alltel PCD UM185 USB modem for their mobile broadband internet. I have a Cradlepoint MBR1000 router which I plug the usb modem into to share the internet through a wireless network which has WPA security on it. I want to use my 1TB time capsule to backup the computers in my house wirelessly and not as a router. What connection do I need to make and how to do I setup the time capsule this way? I can't figure it out. Thanks for any help in advance. If you need more information just ask.
    Thanks,
    John

    Steven's solution will work just fine if you want to connect the Time Capsule using ethernet.
    You might also consider configuring the the Time Capsule to "Join" the wireless network. In this type of configuration, backups would occur only over wireless and you could locate the Time Capsule virtually anywhere it can receive a good, strong wireless connection. Important Note...the ethernet ports on the Time Capsule are not enabled in this type of configuration, so you will not be able to connect using ethernet.
    Open AirPort Utility and click Continue
    Then select the option to "Join a wireless network" and follow the prompts

  • How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

    My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

    Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
    Click on the Wireless tab at the top of the page
    Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
    Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
    Then, you must power off your entire network...all devices....in any order that you want
    Wait a minute
    Start your modem/router first and let it run a minute
    Start the Time Capsule and let it run a minute
    Keep starting devices one at a time until everything is powered up
    If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
    Open System Preferences (gear icon) on the dock
    Open Time Machine
    Click Select Disk
    Click the Time Capsule to highlight it
    Click Use for Backup or, it might be Use Disk
    Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
    If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

  • How can I use my time capsule with windows7

    How can I use my time capsule with windows7?

    This is asked regularly.
    https://discussions.apple.com/message/10978060#10978060
    Look at the more like this. On the right column next to the post.
    Load airport utility for windows.. which will also load bonjour for windows.
    In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • Can I use airport time capsule with a hotspot network?

    Can I use airport time capsule with a hotspot network?

    Can I use airport time capsule with a hotspot network?
    Very very poorly..
    It can join a wireless network..
    See instructions here.
    https://discussions.apple.com/thread/5719954?tstart=0
    End result is super slow wireless connection to the TC and all packets pass through the hotspot so expect internet to drop to nothing while you are backing up.

  • How do you replace a time capsule with a newer one

    How do you replace a time capsule with a newer one?

    LOL.. pull the old one out.. put the new one in. Setup the new one.. do not copy setting from the old one.. it is better to start over and never copy configuration files.. although you might get away with it.
    Plug the old TC into the new one.. change it to bridge mode.
    You can then access and copy old backups to the new TC if you want. Although IMHO just keep the old TC for 6months. .then wipe it and sell it or use in different role. Do start clean fresh backups on the new TC.
    If that is all useless. ask the specific question and we can try for a specific answer.

  • How do I use my Time Capsule with hotel wired internet

    How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

    It may not be possible..
    If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
    Look up instructions on using ICS (internet connection sharing) in the Mac.
    eg for 10.6.8 http://support.apple.com/kb/PH6589
    eg http://support.apple.com/kb/PH10740
    Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

  • Can i use my time capsule with virgin wifi hub

    can i use 2tb time capsule with virgin media wifi hub router

    Yes, but it will need to connect to the Virgin router using a permanent wired Ethernet cable connection from one of the LAN <--> ports on the Virgin router to the WAN "O" port on the Time Capsule.

  • How to use my Time Capsule with my Router?

    My Time Warner Cable HS connection uses a specific modem, the Motorola Surfband SBG6580.
    I was currently using my Tiem Capsule as my router and just a Cable Modem from Time warner, but this particular service uses this wireless router. I need to get my Apple Time Capsule back into my netowrk.
    I would either like to understand how to use the Motorola as a switch or just as a modem so I can use the Time Capsule as my router or vica versa, use my Time Capsule as just a back up drive and leave the Motorola as my rwireless router. The onyly thing about this second configuration is that I need to connect to the Time Capsule wirelessly with one of my computers for back up, the other two are both on an ethernet port hard wired.
    So this is what I have to put in place:
    Motorola Wireless Cable Modem
    Time Capsule
    5 Port EasyNet Switch
    iMac Desktop (Ethernet hardwired)
    Macbook (Ethernet hardwired)
    MacBook (wirelessly connected to the network)
    Any thoughts great appreciated.
    Henry

    It's likely that your ISP will require that the Cable Modem is the first device in the chain. You do need to set the Time Capsule to Bridge mode, disabling the DHCP. Now, the Cable Modem is providing DHCP to devices that connect to it, and devices that connect to the Time Capsule.
    You will be able to wirelessly connect to the Time Capsule and network.
    Here is a simple article explaining:
    http://www.ehow.com/how5309467bridge-time-capsule-mac-pc.html

  • Can you use the Time Capsule as a wireless drive to share music on multiple computers

    Does anyone know whether you can use the time capsule almost as a nextwork drive of sorts (i.e. to share Music etc amongst a few computers)?

    The TC is a dumb hard drive inside an apple extreme router.. with a couple of knobs on.
    It has no media servers.. and very little flexibility.. indeed it serves files.. AFP or SMB.. and that my friend is that.
    So if you want a media server in the network..then a mini is a better proposition. At some point, with sales of ssd laptops soaring and space on these devices at a premium, Apple is long overdue on a revamp of the TC.. it is really either time to drop it or to create something a lot more powerful.. the mini might be a cheap computer but it is not really a file server.. having so little internal disk space and lacking external connectors unless you are rich enough to buy thunderbolt.

  • Can I use my time capsule with a bad hard drive as a wireless router if I remove the hard drive?

    I have a 500 GB time capsule with a failed HD (i've repalced the whole machine with a new time capsule).  I cannot get past the start up when I plug it in and the light glows a solid amber.  If I remove the hard drive can I use it as just a wireless router to exted my network?

    Yes, although the existing power supply might go bad before long.. you can run the TC as just an AEBS..
    It is a fairly easy job to get the hd out.
    http://www.ifixit.com/Device/Apple_Time_Capsule
    Key to it is using hot air gun or even a hair dryer on really high temp lowest fan and spend enough time getting to glue to soften.

  • Using the Time Capsule with a Mac OS X 10.4.10

    I'm sure this post has turned up often, but I've searched Google high and low and cannot find an easier solution to my problem.
    Basically, I bought the Time Capsule because I wanted to use the wireless router and I wanted an external hard drive. I've read articles stating that, even though I don't have Leopard and thus don't have Time Machine, I can still use the Time Capsule's storage to manually back up files (MP3s, photos, movies, etc.). However, I cannot find anywhere to tell me exactly how to do this (and it's making me feel rather illiterate when it comes to Macs)...
    Could someone help me out?

    All you need to do is follow the Time Capsule setup guide. I believe the 1st gen. TC setup guide is non-specific for Leopard/Tiger OS.
    http://www.apple.com/support/airport/
    Perhaps you need to describe your setup, what you want, what you've done, and what doesn't work yet.

  • Using a Time capsule with a hot spot device

    Is there a way to us the time capsule with a mobile hot spot device so that the TC is the primary wireless router instead of the hot spot device?

    Sorry, but this is not possible unless you have an adapter that will provide an Ethernet signal to the Time Capsule's WAN port.

  • Using Time Capsule with existing wireless router

    I am thinking about getting a TC, but I wanted to know if the following configuration would work:
    DSL modem to existing wireless B router. Then have the TC recieve internet from the existing wireless router.
    Basically I want to put the old router in the basement where the only wiring is, but put the TC upstairs on my desk so I can connect the printer to it.
    Thanks!

    Although, you can join an existing network using a Time Capsule as a wireless client, it’s recommended that the existing network is an 802.11n network.

Maybe you are looking for

  • Can't take videos on 6630

    Hello! I have a Nokia 6630 for 6 days. It worked perfectly until yesterday when I tried to take a video. I entered the camera menu and pushed the right button to go to the video section and something weird happened. "Feature not supported". See the s

  • Screen enhancement for fd32

    Hi Abapers. I have a requirement where i have to enhance screen of fd32 I have checked RFDRRANZ user exit but its not serving the purpose.. can u pls tell me how can i customize the screen

  • 1000D and lighroom 4. RAW photos not recognised..?

    i have a canon 1000D and lighroom 4.  lightroom will not recognise the RAW files. any idea why?  thanks

  • Keynote 5.1 crashes when export to .mov.

    Keynote 5.1 crashes on me when I go to export my presentation to a .mov file.  Could it be a lion issue?         

  • Why can't there be movie redeems through barcode

    on the movie boxes there are barcodes why can't you type them in somewhere and recieve an itunes digital copy? that is a great idea.