Shouldn't there be jcontrol/jlaunch pid's running on an XI system?

Hi Folks - I'm a little rusty on XI (and JAVA stacks in general) and would appreciate some help.  We have a NW740 XI/PI system....it's a dual stack....and so my understanding has always been that XI/PI involves/requires both ABAP stack and a JAVA stack (the JAVA stack being what stuff like the Integration Builder/Integration Repository/Directory runs in).
And usually when I think of a JAVA stack running - I expect to be able to verify this by seeing pid's like "jlaunch" or "jcontrol" running @ the O/S level.
Please see the attached doc - I do not see those running in our case.  There is an SCS instance installed and I can see pid's running for that though.
QUESTION:  What should be seen running @ the O/S level to verify we have a JAVA stack running?  Does it depend on the SAP version (we have a very new release so not sure if something's changed w/ the architecture here)
Thanks!

Hi Ben,
There was some changes in JAVA
Now you can see jstart in place of jcontrol and jlaunch.
To access Java stack from ABAP - Type SXMB_IFR
Refer - SAP NetWeaver Process Integration - SAP Library

Similar Messages

  • There is  1 or 2 msg server for ABAP+Java system?

    Hi, all:
    I am confused by the number of msg server processes in ABAP+Java system.
    We are running on Windows/Oracle platform.
    There are 2 msg_server.exe at OS level. So it looks one of them belongs to the central instance and one of them belong to the central service of the Java stack. Am I correct? I've heard that even for an ABAP+java system, there is only one msg server. Which one is correct? Please share your opinion, thanks.

    Hi,
    There will be 2 MSG servers running in ABAP + JAVA system..
    1 for SCS and other for Central Instance.
    ENJOY SAP

  • Can there be more than one transport targets for a business system in sld

    Hi All,
    I have a question about transport targets in sld for sap xi 3.0 sp19.
    We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
    I know that there can be more than one source for a business system where more than one  different business systems have the same business system as the target.
    I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
    Please help .
    Thanks,
    Padmaja

    Hello,
    I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
    As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
    Regards,
    Mark

  • Can there be more than one JVM Running on the same machine

    Can there be more than one JVM Running on the same machine.

    Even JVM's of different versions (or vendors) can run on the same box at the same time.

  • HT4759 I want to use icloud mail on both iPhone 4s AND my pc. icloud mail on PC is mega glitchy and frustrating because my PC is ancient, I run XP, & these DO NOT MEET req's for iCloud.  Is there a email platform that will run well on both XP and iPhone?

    I NEED to use icloud mail on both iPhone 4s AND my PC. I need to use both. 
    Trying to use icloud mail on PC is mega glitchy (STOP SCRIPT WARNINGS EVERY FEW MINUTES) and frustrating because:
      1.  my PC is ancient (but nicely refurbished/fast)
      2.  I run XP  (with both Firefox and Chrome- newest versions)
      3.  thusly, I DO NOT MEET SYSTEM REQUIREMENTS for iCloud.
    In my passed attempts I found that
    1. Yahoo doesn't work well on iPhone
    2. Gmail doesnt work well on iPhone.
    I must be missing something... an app or... maybe a donated/ NEW FREE MAC!  (That would be sweet!  Ha.)
    Is there an email platform that will run well on both XP and iPhone?
    or... Please say it isn't true: I would love a Mac tablet or desktop. We have no money for a mac. SOL?   Is this iCloud apple tech only for wealthy middle class and above who can afford to have the newest and best of everything? 

    @Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
    UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
    Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
    You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
    Exit out of Outlook and reboot your machine.
    Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
    Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
    IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
    You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
    Everything should now sync pretty seamlessly.
    I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
    Arthur P. Johnson

  • Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

    Is there a way to "Quit" all running apps in dock at the same time verses right-clicking each one individually?

    IIRC, OPTION-click on the Apple icon on the menu bar and select either Restart or Shutdown. Alternatively,
    Control-Command-Eject
    Quit all applications (after giving you a chance to save changes to open documents), then restart the computer
    Control Option-Command-Eject
    Quit all applications (after giving you a chance to save changes to open documents), then shut down the computer

  • Is there a function to get the IP of this remote system

    Hello EveryBody
    Currently I have an application that runs on our network. When someone logs on to the network it checks there system and gets the pc name. I would like to also get the IP address of that system. As well I may later like to ping that computer.
    1) Is there a function to get the IP of this remote system?
    2) IS the a function to ping a remote system and receive back the response?
    Thanks a lot.
    R

    Hello EveryBody
    Currently I have an application that runs on our
    network. When someone logs on to the network it
    checks there system and gets the pc name. I would
    like to also get the IP address of that system. As
    well I may later like to ping that computer.
    1) Is there a function to get the IP of this remote system?
    2) IS the a function to ping a remote system and
    receive back the response?Is this lan only?
    Because if wan or internet then the remote computer would have to have an address that is reachable from your computer. For the internet this would mean it would have to be public. And for a wan the IP would have to be unique across the wan.

  • As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

  • My computer with Windows 7 says there is no iPod when I run diagnostics on my iTunes, even though my iPod shuffle is in the dock. How can I fix that?

    My computer with Windows 7 says there is no iPod when I run Device Sync diagnostic test on my iTunes, even though my iPod shuffle is in the dock. How can I fix that?

    Hi there JMW1973,
    You may find the troubleshooting steps in the article below helpful.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    -Griff W. 

  • When I plug in my iPod nano iTunes asks me to restaure it therefore loosing all my data. Also, there is no tag for Nike Run sync.

    When I plug in my iPod nano iTunes asks me to restaure it therefore loosing all my data. Also, there is no tag for Nike Run sync.
    Can I syncronize my iPod without loosing all its data?. How about syncronizing it to my iPhone?

    Have you tried the steps listed here?
    http://www.consumingexperience.com/2007/11/windows-no-disk-exception-processing. html

  • I have always heard that Macs are less likely to get infected with a virus.  My computer has been running much slower since I installed Maverick.  Just not sure what the problem might be.  Is there a way for me to run a diagnosis?

    I have always heard that Macs are less likely to get infected with a virus.  My computer has been running much slower since I installed Maverick.  Just not sure what the problem might be.  Is there a way for me to run a diagnosis?

    Some have found relief just by reinstalling, but it is more than likely incompatible third-party applications that slow it down.
    You will have to investigate to see what it is.
    Open Activity Monitor and see if anything is using a lot of CPU% or Memory. If they are, check to see if there is an update for them.
    Another place to look is the Console. See if anything is logging repeating messages with throttling and/or respawn in the All Messages list.
    Sometimes it is not that easy to root out the problems, but if you have anything that purported to clean, protect, optimize, maintain, or flush your system, then that is likely the cause.

  • HT1338 my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8.  How do I get that?  When I run a software update, system says there is none.  Help

    my mac is running 10.5.8, I bought a new Nano, itunes is prompting me to get the current itunes, but my mac will not take it, states I need 10.6.8.  How do I get that?  When I run a software update, system says there is none.  Help

    Click here, check that your computer meets the requirements, buy and install the DVD, and then run Software Update.
    (73181)

  • I have Quicktime 7 on my new MacBook Air running Yosemite 10.10.1 but would like to know if I can view or run my .mkv movies/files? Or are there any approved software that can run or view my .mkv files.  Thanks.

    I have a new MacBook Air running Yosemite 10.10.1 with Quicktime 7 but would like to know if I can view my .mkv files on Quicktime 7 or are there any approved software I can run that's safe for Yosemite 10.10.1.

    Hello kimosabe0731,
    Welcome to the Apple Support Communities! At this time, QuickTime does not support the playback of .mkv files. For more information, see the following resource:
    Media formats supported by QuickTime Player - Apple Support
    http://support.apple.com/en-us/HT201290
    Cheers,
    Matt M.

  • Is there any method to remember the running subtitle and audio stream when navigating through menus?

    I have a language Menu named 'Setup' with 4 buttons 1.English  2.Spanish  3.Spanglish  4.Subtitle Off.
    To reach this page you have to hit Setup button on Main Menu. The setup button takes to a sub-menu of Setup where I have a symbol of 'tick' at Subtitle Off indicating the state of the current subtitle stream. I have 3 more sub-menus with similar buttons but with 'tick' at different languages indicating the state of the current running/selected language, 2nd page has English with tick, 3rd page has Spanish with tick and 4th has Spanglish with tick. My client wants me to jump on the respective language ticked page when you hit the setup button on Main Menu. As far as I understand we cannot assign a code in Encore to a single button to read what subtitle stream is running.
    Is there any method to remember the running stream when navigating through menus?
    I have done this in Sonic Scenarist.
    Regards,
    A Gandhi

    I think this was added in a "newer" version of Encore (meaning anywhere from CS4 up). In any event, it is available in Encore CS6.
    There is a menu (not button) property that allows yoi9u to make the active subtitle track button the default (i.e. selected/highlight shows) just as you want.

  • Is there a way to have applications run in the background after I log out?

    New to Mavericks, have a new iMac after being on Leopard for years. After I log out, all the applications I had running stop and close. Is there a way to keep those running? It seems like logging out, and the applications stopping, would negate the ability to see any notifications on the lock screen. I have multiple users set up on this computer, is that the reason?

    By definition, logging out means quitting all your processes. If you want to log in as a different user without logging out, see below.
    OS X Mavericks: Switch quickly between users

Maybe you are looking for

  • How do I create an email list sign up form for my iWeb website?

    Well that's the question - how do I create an email list sign up form for my iWeb website? Could someone tell me what's the simplest way using iWeb to create an interactive option for users to enter their email address and the info be forwarded to me

  • Issues while installing ORACLE 10g R2 RAC on RHEL 5.3

    i am installing oracle 10g R2 RAC on RHEL 5.3 in a test environment. my aim was to install using ASM. i went through the pre-requisites ok before beginning with the installation. since RHEL 5.3 doesnt support raw devices i used http://www.idevelopmen

  • How to get the index of the clicked button on TOOLBARBUTTONCHOICE

    Hello Experts,    I have used toolbarbuttonchoice and created the dropdown list of the buttons dynamically. now when any of the button is clicked i need to get the reference of the button to call appropriate code in the action, but i am unable to get

  • Displaying Korean in Text messages.

    Hello all, I've recently have had a weird issue displaying Hangul (Korean) in text messages. I used to receive and view them no problem with all the correct characters as text in the SMS chat windows, until maybe a few months ago. Now what happens, i

  • Problems deleting photos

    Has anyone had the same problem I have, deleting photos downloaded to my iPad? I mark them and then press the delete icon and nothing happens.....