Shoutcast stream (url in post) does not play back properly, what's up?

Can someone help with this?
WNYC's live FM stream -
http://www.wnyc.org/stream/fm.pls or
http://wnycfm.streamguys.com/listen.pls
is a 32kbps mp3 stream hosted by shoutcast at the following url:
http://wnycfm.streamguys.com/
When opened with itunes 7.1.1.5 (windows), only the 16-second sponsor messages plays - the live stream never begins to play. What's up with that?

Resolved in another thread. Thanks.

Similar Messages

Sound Does not Play Back

I am playing recorded video from a Sony HDR-HC1 through the DV out and capturing in on location. All goes well(except for some red frame video) during capture, good video and audio. I captured three times. On one occasion the audio played back. The other two it did not. Audio will not play back in PP CS3. The file is an AVI T2. The same clips play back fine in Edius 3.6 with good sound.
Any tips on what is wrong?
Kent

Hey There and Welcome to the mac forum!!!!
Could it be possible that you moved or even trashed the audio files you were using? If so then they get trashed in imovie to.
Next time, transform the movie into a Quicktime movie (once you are completely done the project). Once you have done this, you can move or even trash any of the elements of your movie (even the footage) but this will make your actual imovie project useless (The Quicktime one will be fine).
I hope this helps,
-Hooked

TS1702 Live Notes application does not play back the audio.

I bought the Live notes application. I tried to use the microphone to tape the voice. It shows the audio level, if you close IPAD it inform you that is recording de audio. But when I went to play my note the audio does not happen.

Hi
1) Try a Hard Reset as follows.
Remove any devices connected to the notebook. Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook - check if the speakers are now working.
2) Please First check if the speaker icon on the unit is not muted.
3) Go to device manager and uninstall the Sound driver and restart and unit will install the driver automatically.
4) Try doing System restore to the date when the unit was working fine.
5) Try to update the driver from hp.com website for Audio & Bios.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Video does not play back - please help

Hi everyone...
Here are the specs:
Premier Pro CS4
Windows XP SP3
Intel Core 2 Duo
T9400 @ 2.53 Ghz
2.53 Ghz 2.90 GB
149 GB HD - 111 GB free space
I am not able to play back any type of video, it will pixilated and freeze. The audio plays fine. I have imported QT files as well as captured video at the standard DV-NTSC Standard 48Khz
During capeure I have no problem viewing or capturing....
The thumbnail image shows a proper image but ones I hit play on the thumbnail preview it pixilated and freezes as well. Even if I drop the clip in the timeline it does not work.
I checked the material by using it in another computer with PPC4 and it worked fine...so the source material is not corrupted....
Any and all the help is appreciated.

Regarding QT that is what I have always used with other NLE, what do you recommend?
I've had great luck with QT. I've had the Pro version on all machines going way, way back, with not one issue. Many others have not been so fortunate. As I do not let it update, I managed to miss the 7.4.x debacle, where about 3 udpates killed almost everything Adobe. I'm running 7.5.5 on all machines, IIRC. QT is up to 7.6.3, last time I checked.
I get a ton of .MOV files and specify the Apple Animation CODEC. To date, all have played and edited fine on my PC's. Again, based on the reports from the field, YMMV. Just because I have had 100% success, does not mean that any others will. Many have not.
Now, I have the Pro update, and I cannot say how that might affect things, other than the "features" of Pro. As it is just an "unlock," the "guts" of QT Player have go to be pretty much identical. Still, my results have always been with the Pro version, FWIW.
Good luck,
Hunt
PS, if there were not issues for many others, the term QuirKtime®, would not have come into popular usage.
® Registered to Harm Millaard, all rights reserved. A royalty check will be sent to Mr. Millaard.

Quicktime playback sometimes does not play back Video

Recently upgraded to Snow leopard. Problem appeared after upgrade.
On some, not all, quicktime videos, the play back only has audio, no video. Quicktime ver. 7.6.3.
I have tried to upgrade to 7.6.4, but the installer won't let me, says I already have QT 10 installed. Even after I delete QT10, I still can't install it. I have reinstalled snow Leopard, and quicktime twice. Visited the genius bar, all with no luck.
Also have 3ivx MPEG-4 installed.
Any ideas? This is a problem because the videos of a tutorial DVD that I purchased only plays back some of the QT videos. The DVD works fine on an old PB G4.
Thanks

Open one of the non working files using QuickTime Player (Utilities folder) and then open the Movie Inspector window.
My guess is the files use Flash (.swf) tracks. QuickTime Player higher than 7.3.1 no longer plays Flash tracks.
You can't install 7.6.4 on Snow Leopard.

DVD does not play back on all computers and DVD players after burning

I have built and formatted a dvd using dsp but it will not playback on laptops even though it works fine on dvd players macs, and pcs. On some laptops there is no sound others just crash. Is this a problem with the laptops or how i have formatted the dvd?

suggestion 1
If you are trying to playback on a PC laptop running windows:
Do not use Windows Media Player to play back the DVD, it wont work, it is not a DVD player.
Use the software supplied with the DVD drive such as Win DVD or Power DVD.
suggestion 2
The disc format is incompatible with the DVD drive:
If the disc you created is a DVD-R and you play on a DVD+R drive, or a DVD+R disc played in a DVD-R drive then the disc will not play.
suggestion 3
the drive is a CD drive not a DVD drive

Video does not play back FCP5

When I play back video, only audio plays back, and it shows the first frame of where i was playing back. When I stop it, the video jumps to the last frame that it passes.
Please Help!!!

How are you monitoring?
What's the format?
If on an external device, is the format supported for real time playback?
x

Audio Instr records but does not play back in Logic Pro 9

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

Motion-created QuickTime not playing back properly

I have a small animation created in Motion that I imported into Final Cut Pro and inserted into my Timeline. It looks alright on my external NTSC monitor but when I change my AV settings to Digital Desktop Display -Full Screen and monitor it on my Cinema Display, there is a lot of artifacting and pixelation - especially with graphic elements and even titling created in Motion. I thought this was perhaps an interlacing issue - but none of the standard FCP filters could get rid of it. I test-exported the sequence to QT and made a DVD of it in DVD Studio Pro. Again, the animation played back fine on an NTSC TV monitor, but was crappy looking on my 32" LCD TV (It was a 16:9 DV NTSC anamorphic sequence). Does anyone have suggestions as to how I can make this look good on both the regular and LCD TV?
Mac Book Pro 17" Mac OS X (10.4.8) Final Cut Studio 5.1.2

Your Cinema Display isn't really capable of showing interlaced footage with any sort of accuracy. What you see externally on the NTSC monitor is what you really have. If you must use the CD as a full screen display you need to get an "adapter" box that will rectifiy the problem. AJA & Blackmagic both make boxes, or the Matrox MXO would be the solution I believe. The MXO does some pretty neat tricks other than allow your CD to display interlaced footage correctly... Down converts HD to SD for one thing in RT, as well as allowing the CD to display things as they should be looking.
Jerry

The audio does not play back from the speakers of my laptop, it plays only through headphones ?

Hi, I am not able to hear playback of audio from the speakers on my laptop. Only if I connect a headphone I am able to hear. Kindly help resolve.
Regards,
Vivek. V.

Hi
1) Try a Hard Reset as follows.
Remove any devices connected to the notebook. Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook - check if the speakers are now working.
2) Please First check if the speaker icon on the unit is not muted.
3) Go to device manager and uninstall the Sound driver and restart and unit will install the driver automatically.
4) Try doing System restore to the date when the unit was working fine.
5) Try to update the driver from hp.com website for Audio & Bios.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Itunes does not play video properly - sound or video out of sync

About 6 months ago, all of a sudden my itunes for windows starts to play my movies or tv shows improperly. Video is frozen while the sound plays. Or the exact reverse happens. Apple showed me to uninstall fully and reinstall Itunes, which worked once. Couple of months later the same happens again. I tried again a proper uninstall and reinstall but to no avail.
I have been using Itunes for windows for the last 4 years and nothing ever went wrong like this. Now the only way to see my video is to sync to my iphone.
Anyone have this problem? I've read about the codex issues that can cause problems. I tried some of the fixes and nothing works.
Even says that the firewall or virus programs can interfere - I'm surprised if that would be a cause.
I have a recent laptop with windows 7 premium, 64bit. When I bought it about 1.5 years ago I had no problem with Itunes.
Thanks,
JR

You synced the sd version to the ipods?
You can report the issue to itunes. They should resolve within a day.
http://support.apple.com/kb/HT1933
Beyond that, I am not sure what the issue would be.

Music player either does not launch, crashes upon launch, or does not play music properly

Ever since the iOS5 update, my music player on my iPod touch is experiencing problems.
Upon launch, sometimes it will go to a grey screen for several seconds, and then quit before ever displaying my music library. Other times, however, it will launch properly, but then selecting certain songs or playlists causes it to become very slow, sometimes to the point of crashing. Other times I can actually play music, but after a time I wake the iPod and it is stuck on the "Now Playing" screen and cannot be changed without closing the app with the Home button.
My iPod touch is syncing properly and has been synced to the latest software release. I have tried all the usual solutions, including restarting the app, restarting the iPod, and I have also tried restoring my iPod once but this did not fix the problem.
Any help would be much appreciated. Thanks!

You said you retored the iPod but did ot say what type of restore you performed. If you only performed a restore from backup, try a restore to factory defaults/new iPod. If you still have a problem after that then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Help Please. Audio does not play back when moving by frame in timeline

Normally when I advance through the timeline frame by frame using the left and right arrow keys I can hear the audio. But it just stopped working. Any ideas?
Any suggestions would be most appreciated.
Gene

Thank you! Onward with my latenight editing!
Gene

Does not play video

Dear sir my mobile model is nokia x3-00.
The problem is my mobile does not play any video. When i play any video it play audio well but the frames of video does not display. I also update my phone software but still it does not play video.
What is problem please specify?
It is software problem or hardware problem?
Solved!
Go to Solution.

hi mate,
have you checked via Nokia Suite on PC if there are any firmware updates available for your device? if there are, please update to the latest version offered. failing that, you can try re-installing your current firmware thru Nokia Suite and if that fails, Restoring your phone to factory settings.
Failing that, you will need to take your phone to your local Nokia Care point for inspection: http://nokia.com/support

I downloaded an album and one song from the album does not play?

I downloaded an album and one of the songs listed does not play.

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete track from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link and fill in the details (iTunes support should reply within, I think, 24 to 48 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

Shoutcast stream (url in post) does not play back properly, what's up?

Similar Messages

Maybe you are looking for