Show active user in EP 6.0 SP12 on WAS 6.40

Hi
We have a "simple" issue. How do we see a list of active users in EP60 SP12.
The perfviewer tool for this release does not show a list called "user sessions" any longer (does on EP60 SP2).
Also the iview "Activity report" only shows zero's even when users are online (and we did activate the application i service configuration and restartet)
BR
Tom

Hi Tom,
see http://help.sap.com/saphelp_nw04/helpdata/en/20/b7ced1025f3245b43d23184fc0212f/frameset.htm and the links provided there. This is the way via the VisualAdmin.
Also see note 648639.
Hope it helps
Detlev

Similar Messages

  • Active user issue

    db VISION
    apps 11.2.0.6
    When i fire active user error ora-04062 is prompt.

    Hi,
    Was this working before? If yes, what changes have been done recently?
    Please verify that you have no invalid objects in the database.
    If the above does not help, please go through the suggested steps in (Note: 550364.1 - FRM-40735: Pre-Update Trigger Raised Unhandled Exception ORA-04062).
    Regards,
    Hussein

  • Report showing the number of active users in the system

    All,
    There is a standard SAP report which shows the number of active users in the system (output same as AL08).
    Does anyone remember this?
    Cheers,
    Bidwan

    Hello Bidwan, 
    Are you talking about the report RSUSR000?
    Regards.
    Ruchit.

  • Can the Portal Activity Report show unique users per page?

    Hello all
    I guess this is a rather simple question, but can someone tell me if the portal activity report can show a count of unique users per page per week for instance?
    Or will it just show which users have visited the page in a list without aggregating them to a number? And if the users are aggregated to a number, is it only uniwue users that are counted for the given period?
    Regards,
    Martin

    Hi sogaard,
    It shows the no of unique logons.isnt it.
    Try these blogs
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5497
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5436
    Hope this helps
    Regards
    Vineeth

  • Active users report shows  REP-0004: Warning

    Hi,
    Active users request logfile showing
    Enter Password:
    REP-0004: Warning: Unable to open user preference file.
    How to solve this wraning?And actually what it means
    Regards

    Hi,
    Have a look at the following documents and see if it helps.
    Note: 742122.1 - Reports Fail With REP-0004 REP-3000 REP-0069 REP-57054 On a Cloned R12 (12.0.4) Instance
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=742122.1
    Note: 210795.1 - Troubleshooting Guide for REP-4 error
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=210795.1
    Regards,
    Hussein

  • User status shows active in portal for inactive LDAP users

    Hi all,
    Users listed in the LDAP as deleted or inactive are still listed in EP
    User Management as valid active users.
    1) is there any process or OSS note which can help us to get users
    inactive in portal user management to the corresponding LDAP inactive
    users?
    2) is there any chance that any inactive or deleted entries in LDAP
    should not be searchable from User admin Portal search?
    Any solution for the above problem?
    Please reply.
    Regards,
    haroon

    Hello there,
    i have the same problem: We have several domains that sometimes contain users with the same user-id. This happens, if a user is "moved" from one domain to another: A new user with the same user-id is created in the new domain and the user-status of the user in the old domain is set to "inactive".
    But SAP NetWeaver Portal (7.0 EHP 1) ignores this user-status flag and thus login (with SPNego / Integrated Windows Authentication, which does not send the domain of an identified user to the portal) fails.
    Is there a possibility to get the portal to "ignore" LDAP users (meaning no longer list them in the UME) that have their user-status flag set to "inactive"?
    Thanks for a reply in advance!
    Regards,
    René

  • HT1414 C apple i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US. I m at india k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!

    C Apple, i need to know few things,first of all i shall tell my scenario. I got an iphone 3gs from my uncle in US..after long waiting. I m from south india, living at God's country called Kerala k. well , in that iphone it showing activation screen and trying to activate. not more than that..plz help!
    means.. in simple words, it is trying to activate and all( searching wifi,, taking few minutes..again searching...if it couldnt find any wifi - telling .. try connect using itunes an all)...well any way. finally I try connect to a wifi network, with full speed...3mbps..from Ravi's internet cafe in downtown.
    All after Im getting the below message from that white candy box!( thats all I can use now, because, in my dreams iPhone is something great,  that mankind ever seen....but this really disappointed me......im simpling blinking!!(same with itunes too)
    ""Your iphone could not be activated because the activation server is temporarily unavailable. try connecting your iphone to itunes to activate it, or try again in a couple of minutes.
    If this problem persists, contact apple support at apple.com/support""
    EVERYDAY .EVERTIME.. I C this message and sleep....no use.....and i use to charge that 'white candy box' to c this message!
    I try searching internet and all for solutn...but no one knw about it..but there are...some one me abt method called jailbreaking ..rednw..white snw ..ultrasnw and all...I dnt knw why it is so complicated to troublesht...apple is suppose to be simple and friendly.
    C why u manufacturing these stuffz like this, if does'nt serve the any of its purpose ....or useable to any of its features atleast....C i wont be that disapppointed, if u put an option to playbck music or video during activation and all...
    If you are responsible for manfacturing such unuseable thing, then its ur responsible to destroy it too.....
    anyway now everyone knws that ..I have an apple iphone with me, but that doest make me proud at all...
    Finally I have only few questions to ask...
    1 will it work with my vodafone sim in kerala?
    2 is any way , i can hear any music out frm it?
    3 will i become a proud iPhone user?
    I am already fedup with asking questions..begging for an solution.....
    I hope so you can help to figure it out, without any complications....thank u!

    It was not legitimately unlocked by the carrier it was originally locked to. ONLY the carrier it is locked to can authorize unlocking it.
    In order to allow it to be used on a different carrier, the phone was hacked or jailbroken. An unauthorized modification was made to the phone. That modification has damaged the phone. You can not get support for it here or from Apple.

  • How to know the number of Active users logged in to a Essbase  Application?

    Hi,
    Is there way to capture/log the number of active users who have logged into a particular Essbase application at a given time.
    In Essbase or in Shared services?
    I know we can see the EAS-Edit Sessions shows the actively logged-in users, then we can sort on the application/database & manually count the number.
    Is there a way to capture it in a log at a given time on a regular basis. Any MAXL or Shared services feature?
    Appreciate your thoughts.
    Thanks,
    Ethan.

    You could use maxl .
    display user all;
    there will be a column called "logged in" which will display true/false for the users
    but that will just show if they are logged into the server and not the application
    You can also use use display session
    display session all;
    or
    display session on application sample;
    which should show what you are after.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to get active user data using vba code in excel

    Start with this script: http://community.spiceworks.com/scripts/show/1572-list-user-info-in-excel
    Then add an extra line to get the msDS-UserAccountDisabled attribute, or test for it in an If/Else block.

    Could you please help me to get only active user details from active directory using vba code.
    Any help would be immensely appreciated.
    Thanks in advance
    This topic first appeared in the Spiceworks Community

  • Old Domain Name showing in User Profiles

    Sharepoint User Profile Sync is showing some users with our Old Domain name (from years ago).  This domain name is NOT  in our Active Directory.  I'm guessing that the profiles that show the old domain name must have been in our Sharepoint
    2007 and got ported over when we upgraded to Sharepoint 2010.
    This is causing conflicts and some workflows not to work (ones where its looking up a user's profile).  And when I look in Microsoft Forefront Identity Manager, there are some users listed with this error: Exception while trying to migrate user "abc\johndoe"
    to "xyz\johndoe"..  Microsoft.SharePoint.SPException: The user does not exist or is not unique.......
    ("abc" being the old domain name...and "xyz" being our current domain name)
    I'm wondering what is the best way to get rid of the old domain name in our Sharepoint 2010 user profiles?  Should I update them in the User Profile database in SQL?
    Does anyone know how to fix this?
    Also, in Central Admin under Health monitoring, we have this message
    "People search relevance is not optimized when the Active Directory has errors in the manager reporting structure. In Active Directory, only company leaders should have the 'manager' property set to NULL. As a result of errors, the Active Directory can
    incorrectly have the 'manager' property set to NULL for other users that can cause a decrease in people search relevance. By specifying the actual leaders of
    the company, these inconsistencies are not taken into account and the relevance problem is corrected. 
    Remedy
    Specify the company leaders explicitly. Use the following PowerShell
    commands: $upap = Get-SPServiceApplicationProxy [appid]; Add-SPProfileLeader
    $upap [Domain]\[UserName]. Run 'Get-SPProfileLeader $upap' to check whether the
    leader was successfully added. As a last step, run a full crawl on the content
    source containing the start address (URL) of the user profile application.
    Not sure if this is related.
    Any help would be much appreciated... thanks!

    If Mysite Clean Up job is running then this issue should be fixed(removed all old profiles)  in couple of User Profile Sync( Full followed by couple of Incremental). Basically, FIMs
    responsible to mark the user as deleted within the UPA then CleanUp Job purge these profile.
    http://www.harbar.net/archive/2011/02/10/account-deletion-and-sharepoint-2010-user-profile-synchronization.aspx
    How many users you are seeing, are they showed in the Profile missing options? if less numbers then you can simply remove the IDs from USer Profile manually.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Safari will not open but showed activity on mac

    When I open Safari and it only showed safari bar on top and showed activity on dock and nothing on screen still can see wallpaper.
    I also restart and reinstall the safari and still same problem.

    Hi,
    You may have inadvertently installed the Community Toolbar. Follow the paths here:
    /Library/Application Support/ Move the Conduit file to the Trash.
    /Library/Application Support/ Move all of these files to the Trash: SIMBL/Plugins/CT2285220.bundle
    /Library/InputManagers/ Move CTLoader to the Trash.
    /Library/Receipts/ Move ctloader.pkg to the Trash.
    /Library/ScriptingAdditions/ Move any Conduit / CTLoader related files in that folder to the Trash.
    /Users/<User name>/Library/Application Support/ Move Conduit to the Trash.
    Relaunch Safari.
    Carolyn  

  • DR server still showing consolidation users and messages from production

    We are doing a DR exercise. My first. We copied the production database to the dr servers. Since they are on the same domain, we put entries in the host files on all our servers to spoof the prod server names to point to dr servers. Moved selected data files for essbase, etc to the dr application disks.
    Everything appears to be working except for HFM. I still see production users activity and messages in the shared services console when I go to administer, show consolidation user activity or messages.
    I have searched the registry, all database tables I could think of, and the application disks on the HFM and shared services services looking for a hardcoded IP and can not find one.
    The message below came out of the hfm config log which has the production database name (which when pinged points to the DR database serrver) but the IP listed is the production IP. Any suggestions?
    (Jul 30, 2010, 10:21:25 AM), com.hyperion.config.wizard.impl.DBWizardState$1$1, DEBUG, DB component setHost: p5wiadbs10.FNFIS.COM/10.132.205.63

    Couple more comments :
    1.) WHERE are you accessing HFM Web from? Locally on one of those servers or from another computer?
    If this were me at this point, I would break out Fiddler2 (to verify which servers web traffic is coming/going to) and then I would fire up wireshark (all network scanning) to try and figure out what server(s) are trying to talk ot production and when. Network Monitor from MS may be a good option as well as I believe you can see network traffic by PROCESS which will help you narrow down what program(s) are trying to hit production envirionment information. (http://www.microsoft.com/en-us/download/details.aspx?id=4865)
    My understanding is that HFM directly only has cluster information in the HFM database (HSX_CLUSTER_INFO, HSX_CLUTER_CONTROLLERS, HSX_CLUSTER_SERVERS, etc.) There shouldn't be any other machine specific information in HFM database, etc.
    I do know that the workspace has some redirects going on in the .CONF file; however, if there was something hardcoded, you would have found that...
    My guess is that something in the Shared Services/Foundation Services database is pointing to production as the other servers talk to that machine for config info. Otherwise, something is buried in a web config file, but you should have discovered that already.
    2.) Additionally, note that HOSTS file changes only affect DNS resolution. If there are any type of broadcast messages or WINS resolution happening that won't address it. To hardcode WINS resolution, you would update LMHOSTS file in the same folder as HOSTS. Using wireshark to monitor network traffic on the same subnet as those servers would definitely be valuable here...... Broadcast messages would be using MAC address of networkcard and not hostname, for instance.
    3.) Maybe try some simpler stuff first. What happens if you re-register the app through workspace? What about unregistering / re-registering server to shared services via configuration utility? (Though, I'd be a little bit concerned that it might unregister your real application if it is talking to production shared services...)
    Edited by: beyerch2 on Aug 30, 2012 8:51 AM

  • Active users from "TH_SYSTEMWIDE_USER_LIST"

    Hi  all,
    We  are working on  a year end  project  where we need to know how many active users in the system .
    We  have 6 apps servers  and when a user login   from SAPGUI we can  his id in all Apps servers making  as 6  active connections  .
    We are using " TH_SYSTEMWIDE_USER_LIST" function module to get the no of users count.
    All users  login thru   a timesheet application [. Net]  and it will call WAS  -and WAS  calls R/3 thru RFC.
    We are expecting more than 10000 users to be using this apps on year end to sync timesheets , we are planning to put a rfc call  from .Net application to " TH_SYSTEMWIDE_USER_LIST"  and get the no of users  count and getting thru if users <10000.
    But  each user  login thru front end have 6 active connections and Each RFC call have only 1 RFC active call and how can we make  nearby value of  real active users  like 2 users 1 from Front end and 1 from rfc make a call it must show 2 active connections  not 7  active connections.
    TH_SYSTEMWIDE_USER_LIST just gives one  number , is there any way we can find only active users removing redudent connections.
    Please suggest...
    Thanks,
    Subhash.G

    Fixed the issue, with load balancing..

  • Previously activated users now getting "Product not activated"

    We have Office 2010, and use MAK keys for activation. Today we've had 4 users who were previously activated (for a couple of years) say that they're suddenly getting the "Product not activated" message. A look at MS EOpen license page shows that
    we're not out of licenses. We can get it working using the elevated command prompt "cscript ospp.vbs /act" but I'd like to know what's going on. It would be great if I could fix them all and prevent future recurrences.
    All of the machines are Dell laptops with Windows 7.

    Don and Greta, thanks for your prompt responses. I spoke with MS Activation Support, and it appears our KMS key was blocked. This is likely because of our "divorce" from our parent organization; I expect they used their KMS key (legally, we owned
    our own licenses but I believe the umbrella org can use the same key for all children).
    Rather than figuring out how to set up a KMS server for some, but not all, of our machines, I figured I'd convert them to the MAK in my organization's name. I made the following script (and another for 64-bit machines):
    cd C:\Program Files\Microsoft Office\Office14
    cscript ospp.vbs /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-ZZZZZ
    cscript ospp.vbs /act
    When I run this from the cmd prompt (as administrator) it runs fine; at the end it says "product activation successful" with ZZZZZ as the last characters. However, when I run any audit program (Kaseya or Belarc Advisor) it shows that the old KMS
    key is still there. This has been the case on at least 8 machines.
    When I look at MS Volume Licensing page, I now see 8 new activations on the key that ends in ZZZZZ. Is there any way to make the machine reflect that it is using a fully licensed MAK? I did try restarting, and I ran the batch file while all instances of
    Office were closed.
    Thanks.

  • Laptop wont recognize him as an active user with a license only trial

    Hi one of my team members keeps getting a message that his trial will soon expire. We cannot seem to get his laptop to recognize him as an active user with a license.
    Thanks!

    This is for that user, on that computer...
    Does your Cloud subscription properly show on your account page?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for