Show Address-ID2 and Address-ID3

Hi, has anybody an idea regarding that point? thanx, Nicholas
Hi,
although Adress-ID2 and Adress-ID3 ar part of CRD1, the two fields are not shown in the Register Address if I am working with an austrian company, but the fields are shown for the german company. I cannot add the Fields via the Form Settings!
I even can import the Fields via DTW an I can see that they are filled (Query Generator ->CRD1), but they are not active in the Adresses!
I have tested the "problem" with 2007A SP00 PL48 and 2007 SP01 PL05, no effect!
Thanx, Nicholas
Edited by: Nicholas Wieser on Nov 26, 2009 1:51 PM

Hi Anucha,
Perhaps, I am not understanding your requirement. To upload a file, for instance, you must be connected to the portal, therefore you know who uploaded these documents.
Could you give me more information about your necessity ?
Patricio.

Similar Messages

Why does my apple id in app store settings show one thing and in the apps it shows a different id (ccl43) no email address)

why does my apple id in app store settings show one thing and in the apps it shows a different id (ccl43) no email address)
I am unsure what to do I cannot get into my apps account in order to upgrade it. HELP PLEASE!!!!!!

It's the Apple ID that app was purchased with.

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

Hey my iphone 4 has a problem regarding carrier. Its always showing searching mode and wifi-address N/A and Bluetooth address 00:00:00:00:00 and call function is disable

hey my iphone 4 has a problem regarding carrier. Its always showing searching mode and wifi-address N/A and Bluetooth address 00:00:00:00:00 and call function is disable. Please help me. I have tried every thing ..like restore from DFU mode with out sucess.

Refer to Note 98458 - SAPMSSY1, CALL_FUNCTION_NOT_FOUND

Show user name and IP address

Hi All,
When we upload or create contents or post the messages in the discussion. The user name will be recorded. Is there any ways to record and show both name and IP address of user?
Thanks,
Anucha

Hi Anucha,
Perhaps, I am not understanding your requirement. To upload a file, for instance, you must be connected to the portal, therefore you know who uploaded these documents.
Could you give me more information about your necessity ?
Patricio.

I have two gmail email boxes, one showing as Gmail, and the other is under my husband's email address. When I send from the Gmail box, the blank email has my gmail address, but when someone replys it goes to my husband's email box. Can someone help?

I have 2 gmail boxes on my MacBook Pro. One is mine and shows as Gmail and the other is my husband's which shows as his email. When I send an email, it has my email address in the From line automatically, but when someone replys it comes back to my husband's email box. How wo I fix this?

I have this exact problem. I have 3 email addresses on my mac and I can select one, and the email still be sent through another account and I won't know it until I get a reply for that email in one of the other accounts.
MacBook Pro, Mac OS X 10.9

Shows address bar etc. but won't show the actual page, except in "full screen"u

When I launch firefox it only shows address bar etc. but won't show the actual page, except in "full screen" view. My OS is Windows Vista.
In other words, I get the top menu bars and the rest of the screen show my desktop background.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Can not show Address of BP in XL reporter

Hi all!
I don't undersatnd why i can not show address of BP in XL reporter although i have already entered these information for address.
Thanks!

If you use the report composer to create your report:
Drag the business partner object into the report view an then make right-click --> display more attributes and than choose the adress fields you want to display
Hi !
I have already used this way before i create new thread but Address is stll not showed. You can test in your Database
I'm using SAP B1 2007A Pl42
Thanks!

I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

Hi Rochdr,
You can use the following article to help you address this issue with your mail account in OS X:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for using the Apple Support Communities. Have a good one!
-Braden

ACE Sticky Connections, Show Conn Output and Show serverfarm

Hi Community,
I'm deploying a Cisco ACE module and I have some questions about sticky connections and about the output of the show conn command and show serverfarm command.
I have the follwoing configuration:
rserver host srv_1 ip address 10.4.11.14 inservicerserver host srv_2 ip address 10.4.11.18 inserviceserverfarm host farm_144 rserver srv_1 144    weight 1    inservice rserver srv_2 144    weight 3    inservice
sticky ip-netmask 255.255.255.255 address source st_host144
timeout 10080
serverfarm farm_144
class-map match-all vip_144
2 match virtual-address 10.4.11.208 tcp eq 143
policy-map type loadbalance first-match lb_144
class class-default
policy-map multi-match policy_vip_webcache
class vip_webcache_144
    loadbalance vip inservice
    loadbalance policy lb_144
    loadbalance vip icmp-reply active
    nat dynamic 411 vlan 411
We can assume that service policy was applied at the interface vlan. So, let's go to the questions:
1- If sticky is enabled the output command "show conn" should show just one entry by ip address?
The real output is:
DC01-ACE-01-PRIMARY-SW1/context_servidores# show conn | inc :143333046     1 in TCP   411 10.2.158.87:3616      10.4.11.208:143       ESTAB 286390     3 in TCP   411 10.2.158.87:3562      10.4.11.208:143       ESTAB310233     1 in TCP   411 10.1.5.87:3424        10.4.11.208:143       ESTAB
Look that the ip address 10.2.158.87 is shown 2 times. In same times, the same ip address is shown 4 times to the same VIP and the same port. Is it a normal behavior?
2- According to the configuration, the srv_2 has weight 3 and srv_1 has weigth 1, but the output of show serverfarm show somethin strange:
DC01-ACE-01-PRIMARY-SW1/context_servidores# show serverfarm farm_144 serverfarm     : farm_144, type: HOST total rservers : 2 state          : ACTIVE DWS state      : DISABLED ---------------------------------                                                ----------connections-----------       real                  weight state        current    total      failures    ---+---------------------+------+------------+----------+----------+---------   rserver: srv_1       10.4.11.14:144        1   OPERATIONAL     11         386        0   rserver: srv_2       10.4.11.18:144        3   OPERATIONAL     35         66         0
We can see that the weight is working good, but the total of connections is higher at srv_1 than srv_2. Why?
Somebody can help me to understand better this problem of if its a normal behavior?
Thanks in advance!!

Hi Gaurav,
About question 1, I got some informations too. It's perfectly normal the client open 2 or more connections at the same time. The client's application is the responsable. We removed the ACE and put the client directly to the server and the result of the total connections opened was the same.
About question 2, I made some "clears" on the serverfarm, the sticky database and after that, the numbers were more real.
DC01-ACE-02-SECONDARY-SW1/context_servidores# sh serverfarm farm_webcache_144
serverfarm     : farm_webcache_144, type: HOST
total rservers : 2
state          : ACTIVE
DWS state      : DISABLED
                                                ----------connections-----------
       real                  weight state        current    total      failures
   ---+---------------------+------+------------+----------+----------+---------
   rserver: srv_webcache_1
       10.4.11.14:144        1   OPERATIONAL     1025       15499      4436
   rserver: srv_webcache_2
       10.4.11.18:144        2   OPERATIONAL     1794       33471      471
DC01-ACE-02-SECONDARY-SW1/context_servidores#
Anyway thank you very much for your feedback.
Plínio Monteiro

In Firefox 36.0.1, can I show ONLY copy and paste in the navigation toolbar without showing cut?

In Firefox 36.0.1, can I show ONLY copy and paste in the navigation toolbar without showing cut?

Do you only want this to happen if you right-click in the location/address bar?
You can ddd code to the userChrome.css file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("https://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#urlbar menupopup menuitem[label="Cut"] { display:none !important; }
</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
*Use a plain text editor like Notepad to create a (new) userChrome.css file in the chrome folder (file name is case sensitive)
*Paste the code in the userChrome.css file in the editor window
*Make sure that the userChrome.css file starts with the default @namespace line
*Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userChrome.css. Otherwise Windows may add a hidden .txt file extension and you end up with a not working userChrome.css.txt file

Recently PopClip stopped showing "Cut," "Paste," and other similar options

Hello,
Recently, PopClip stopped showing "Cut," "Paste," and other similar options. I haven't changed anything in the settings. Maybe this will help:
2013-06-04 18:55:22.886 PopClip[1167:707] [INFO] PopAppDelegate: PopClip Initializing.
2013-06-04 18:55:23.089 PopClip[1167:707] Could not find image named 'BuyLabel'.
2013-06-04 18:55:23.093 PopClip[1167:707] Could not find image named 'BlueTick'.
2013-06-04 18:55:23.162 PopClip[1167:707] NSWindow does not support nonactivating panel styleMask 0x80
2013-06-04 18:55:23.164 PopClip[1167:707] [INFO] PopAppDelegate: PopClip will wait 0.500000 seconds to start.
2013-06-04 18:55:26.591 PopClip[1167:707] .sdef warning for argument 'FileType' of command 'save' in suite 'Standard Suite': 'saveable file format' is not a valid type name.
2013-06-04 18:55:26.623 PopClip[1167:707] Bartender Loaded
logout
Thank you in advance for the help!

This is something you'll want to address with the developer of PopClip.

HT1491 My iTunes only show: iTunes U and category , no music and books and other stuffs.

My iTunes only show: iTunes U and category , no music and books and other stuffs. Is it because of my Chinese ID?

You can only purchase content from the store where your credit card is registered - and that credit card must be registered to a valid address in that country. I am afraid that you are restricted in what you can legally purchase from Apple.
Sometimes the restiction of content has to do with licensing rights and sometimes governments will restrict the content that Apple is allowed to sell in their countries.

Apple TV doesn't show main menu and cannot connect to iTunes store

I've been using my Apple TV almost everyday for the past week and i've had it for awhile and all of the sudden it only shows the "computer" and "settings" buttons. It looks like it's connected to the internet because it has an IP address, but it still doesn't show any of the usual buttons on the main menu. When I go to test network it says "cannot connect to itunes store," and says the same when I put in my username and password. I just entered same same username and password in my itunes with no issues so I know the username and password are correct. I've restarted my apple tv a couple of times. I tried to restore it and it says "the update was not successful. The apple tv update couldn't download at this time. Try again later." Agh! I don't know what else to do! Any suggestions are appreciated!!!! Thanks!

A reboot will reset the connection to the network, as those 2 icons are the only ones that don't require an internet connection they are the only ones that will show up in the event of such an issue.

I have set reminders of birthdays for 2013 opting for yeARly reminders however only three of them are showing for 2014 and rest are missing can someone help, while i called up customer support they asked me to reset the phone which as well didn't help

I have set reminders of birthdays for 2013 opting for yeARly reminders however only three of them are showing for 2014 and rest are missing can someone help, while i called up customer support they asked me to reset the phone which as well didn't help

Tina,
I would go crazy if this was me. You may find this interesting from the customer agreement (to see full agreement go here:Customer Agreement | Verizon Wireless):
"HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
This may help you also: Arbitration and Mediation FAQs | Verizon Wireless
You can dispute any charges by doing an Arbitration or Mediation. I have never done it, so I can not help much there but this all may get you started.
Let me know if any of this works! Good Luck! Please keep me updated. I really hope they help you.

Show Address-ID2 and Address-ID3

Similar Messages

Maybe you are looking for