"SHOW ALL" command output comes from where?

Hi,
when we give command "SHOW ALL" it gives parameter values.
actually from where it gathers this data?

those are SQLPLUS settings. sqlplus is a CLIENT. it's an app, and it has it's own settings. read the SQLPLUS manual

Similar Messages

  • "SHOW ALL" command in RMAN

    Hi
    I need to understand, what does RMAN use to read configuration info in case of No Recovery catalog.
    We all know that it read from Control file about backup information.
    But, when my database is in NOMOUNT mode, I connect to rman target /
    Then I run show all; command.
    It displays RMAN configuration, Where is this information stored?
    Any idea?
    Thanks in advance

    Hi,
    Did you compare the output of the <show all ;> commands in nomount and mount (or open) mode?
    In nomount you get the defaults :
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    In mount mode you get the actual settings:
    using target database control file instead of recovery catalog
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backup/DB10G/%U';
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/appl/ora102/product/10.2.0/dbs/snapcf_DB10G.f'; # default
    Regards,
    Tycho

  • I would like to "get off the cloud".  How do I copy all my contacts, etc from where they are to "on my Mac"?

    I would like to "get off the cloud".  How do I copy all my contacts, etc from where they are on the cloud to "on my Mac"?

    Export the information to your Desktop. Stop syncing in iCloud, which should give you the 'On My Mac' option. Then import the information.

  • Where did all these calendars come from??

    Hello,
    This is now my second post! 
    I have a Blackberry Storm, and when I sync'd my personal laptop (calendar, contacts, notes etc) I have suddenly noticed that the appointments are duplicated on my Blackberry - but in different colours!
    I then found that I could select which calendar I was to disply - and when I select just one of them things are OK, but when I select all, I see the duplicate appointments again!
    So, my questions are this:
    Firstly, Although I have three email accounts set up in Outlook - I only use one calendar - so where did the other two come from?
    Also, how can I delete ALL calendar entries and start again?
    Thanks
    Paul

    Hello,
    This is now my second post! 
    I have a Blackberry Storm, and when I sync'd my personal laptop (calendar, contacts, notes etc) I have suddenly noticed that the appointments are duplicated on my Blackberry - but in different colours!
    I then found that I could select which calendar I was to disply - and when I select just one of them things are OK, but when I select all, I see the duplicate appointments again!
    So, my questions are this:
    Firstly, Although I have three email accounts set up in Outlook - I only use one calendar - so where did the other two come from?
    Also, how can I delete ALL calendar entries and start again?
    Thanks
    Paul

  • How can I make it to where you are not aloud to delete the history unless you have a password? Public Fox does not work because they can simply go to "Show All History" and delete from there.

    Alot of people use my computer and I would like to make it to where you are required to have a password to delete the history. I tried public fox but you can simply delete the history by accessing "Show all history". So public fox doesn't work.

    Sorry, Firefox doesn't have a password feature for browsing history, and I haven't seen an extension for that.

  • Where did all those links come from?

    I have just got my dreamweaver up and running on my mac, I
    could not get my site to look right using my back up file which
    come from my old PC. So i have just finished running a 'Get
    File(s)', now all my files have been copied down to my Mac.
    I have opened my 'index.html' file and at the bottom of the
    page in dreamweaver the page contains a long list of random
    hyperlinks there is over a.
    I have checked my website front page ( www.Essex2Let.co.uk )
    and these links do not exist at the bottom of the web page so that
    is good news.
    Does anyone have any ideas why this has occurred??
    I will look forward in hearing from you.
    Regards

    David Powers wrote:
    > Essex2Let.co.uk wrote:
    >> I have checked my website front page (
    www.Essex2Let.co.uk ) and
    >> these links do not exist at the bottom of the web
    page so that is good
    >> news.
    >
    > Right-click and view the source code. There are hundreds
    of links for
    > drugs.
    >
    >> Does anyone have any ideas why this has occurred??
    >
    > Your site has been hacked.
    I have had this happen in the last couple of weeks to my
    personal site.
    My host reckons they made the changes by ftp so had somehow
    got my
    username and password... they think they guessed it, which is
    possible,
    but personally I think they have a security issue with the
    site, as my
    pages were just html, nothing which could cause a security
    issue. I am
    going to change hosts.
    Dooza

  • Is there metadata of any kind on an export file that shows me the project file from where it was created?

    Is there any way in looking at the meta data of a .MOV exported from Final Cut 7 that allows me to see what the project file was? I have this exported file, but I can't locate the original project file from where it was from. Was hoping there would be some sort of data that exists that shows me the directory. I've searched by filename and date created all over my drives but no luck.

    Well, FCP comes from an age where it was assumed the editor had his $#%^ together.
    EDIT: One of my mentors had the conviction that every day when you left the cutting room, you should leave it in such a way that a perfect stranger could walk in in the morning and pick up right where you left off. I really strive to live up to that ideal. I know we all get crazy busy and don't always properly archive our stuff, but it DOES save a lot of headaches down the road.
    Message was edited by: Jim Cookman

  • In the newest version of firefox I cannot find the show all tags in bookmarks. Where is it?

    Hi. When I look under bookmarks, there used to be something I could click on that said show all tags, so I could find things. Now all I see is recent tags. Where can I find ALL my tags? I have spent so much time clicking on things and looking, but this new version is very confusing. Please help! Trying to plan a trip and cannot find all my TRIP tags! Thanks so much

    Sorry to hear you lost that.
    In the Library dialog, there is a section for tags. You can open that using either:
    * Command+Shift+b
    * Bookmarks > Show All Bookmarks
    To create something like that on your Bookmarks menu or Bookmarks toolbar, you need to create a "smart" bookmark folder. The nice feature is that it breaks out your "all tags" by the tag, so there's less scanning through the list.
    (1) Select and copy this places query:
    place:type=6&sort=1
    (2) In the Library dialog, create a new bookmark on the Bookmarks Menu or Bookmarks Toolbar. Click the relevant location, then either:
    * right-click > New Bookmark
    * Organize menu > New Bookmark
    (3) In the Name, enter a query description such as Alpha Tags
    (4) In the Location, paste the places query
    (5) Click Add.
    (6) If you get a dotted rectangle instead of a blue folder icon: drag the new bookmark to another location, e.g, a folder, the Bookmarks Toolbar, etc., within the Library dialog. This forces Firefox to recognize it as a query-type bookmark. The icon should change from the dotted rectangle to the blue search folder icon. Then you can drag it back to your preferred location.
    After that, it should work from your Bookmarks menu or Bookmarks toolbar (wherever it ended up) just like the Tags section of the Library dialog.

  • How to show all non schedule customer from customer master data?

    Dear all expert, i need some guide upon CRM. I have a report which i need to show all the business partner. But ineed to filter out all those business partner which is in the schedule (for visit, plan or opportunity). What i want to show in the report is those customer which is not active at all.
    Please help.

    Hi,
    I have try the methods. But it seems like did not work. What i need is to run a report by using crystal report. In this report, i need to list down all the customer where our sales rep. did not place a visit or plan for visit. This is to allow our marketing manager to monitor why is there some customer which is never been visit or it is a long time ago since the last visit by our sales representative. Please advice on this situation.
    Thank You.

  • E-Recruitment Job Search Template_Country field comes from where

    Helo Experts,
    I am facing a problem in Job search Template. We have only one country, where we operate E-Recruitment, so I have created few branches and assigned these Branches only to one company code in configuration.
    But in the Job Search template in Application cockpit shows two countries, where i am understanding from where this unknown country is coming inaddition to the configured.
    Can you pls help me out, from which table of configuration step the country is picked up and populated in Job Search template.
    Thanks evryone in advance and awaiting for you valuable inputs
    Thanks
    Gita

    Hello Gita,
    as you found out cluster INDX is used for caching the branch location information. The information is maintained by the class CL_HRRCF_BRANCH e.g. in method UPDATE_CLUSTER. The class and its methods are part of the e-recruiting application for maintaining branches (in standard found on the e-recruiting administrator startpage / portal role).
    These internal functions of the e-recruiting applications are the reason why you should not maintain the branches from IMG or directly in TCode BP. Only using the e-recruiting applications ensures that everything is maintained correctly.
    To solve your current issue I'd suggest to maintain the branch again using the link of the e-rec administrator. Set the country to a different value, save it and reset it to the value you want. This should update the cluster.
    Best Regrads
    Roman

  • Show sysinfo command output

    Hi all ,
    In our cisco 5508 WLC show sysinfo output , we are not able to see the current license level and license level on next reboot.
    Any idea on why it is not showing?
    Thanks,
    Vijay

    Hi Vijay,
    Show sysinfo does not provide that information. Here is what show sysinfo provide. Probably you need to look at "show license summary" output
    (WC01) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.4.111.5
    Bootloader Version............................... 1.0.16
    Field Recovery Image Version..................... 7.0.112.21
    Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
    Build Type....................................... DATA + WPS
    System Name...................................... WC01
    System Location.................................. ELT
    System Contact................................... ICT
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
    Redundancy Mode.................................. Disabled
    IP Address....................................... 10.14.7.247
    Last Reset....................................... Software reset
    System Up Time................................... 2 days 5 hrs 11 mins 56 secs
    System Timezone Location......................... (GMT+10:00) Sydney, Melbourne, Canberra
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... AU  - Australia
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +30 C
    External Temperature............................. +18 C
    Fan Status....................................... OK
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 3
    Number of Active Clients......................... 116
    Memory Current Usage............................. Unknown
    Memory Average Usage............................. Unknown
    CPU Current Usage................................ Unknown
    CPU Average Usage................................ Unknown
    Burned-in MAC Address............................ D0:D0:FD:1F:C2:00
    Power Supply 1................................... Present, OK
    Power Supply 2................................... Present, OK
    Maximum number of APs supported.................. 350
    (WC01) >show license summary
    License Store: Primary License Storage
    StoreIndex:  1  Feature: base-ap-count                     Version: 1.0
            License Type: Permanent
            License State: Inactive
            License Count: 250 / 0 (Active/In-use)
            License Priority: Medium
    License Store: Primary License Storage
    StoreIndex:  2  Feature: base-ap-count                     Version: 1.0
            License Type: Permanent
            License State: Active, In Use
            License Count: 350 /350 (Active/In-use)
            License Priority: Medium
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Where does this output come from?

    Since this morning I get the following message on my output console when I start my application, but I have no idea what triggers it.
    I did determine that this class is responsible [ oracle.jbo.common.DebugDiagnostic ], but there's no source available for me to inspect. JDeveloper's help function (searched for "DebugDiagnostic" -- 1 topic) did not provide the right answer either.
    It appears that this class is part of BC4J's debug output system, but I don't have logging enabled as far as I know. Other than this particular message, no other messages are displayed.
    Can anyone provide some information regarding this matter? What does it mean? Why does it appear?
    TIA
    *** WARNING: Oracle BC4J debug build executing - do not use for timing ***
    **************************************************************************

    Class     Method     Line
    DebugDiagnostic     <clinit>()     45
    JUTableBinding$JUTableModel     updateNavigated()     670
    JUTableBinding     updateNavigated()     500
    JUIteratorBinding     navigated()     546
    RowSetHelper     fireNavigationEvent()     257
    ViewRowSetIteratorImpl     notifyNavigation()     2938
    ViewRowSetIteratorImpl     next()     1332
    ViewRowSetIteratorImpl     first()     1145
    ViewRowSetImpl     first()     2242
    ViewObjectImpl     first()     4396
    JUIteratorBinding     rangeRefreshed()     305
    RowSetHelper     fireRangeRefreshed()     168
    ViewRowSetIteratorImpl     notifyRangeRefreshed()     2897
    ViewRowSetIteratorImpl     ensureRefreshed()     2231
    ViewRowSetIteratorImpl     refresh()     2412
    ViewRowSetImpl     notifyRefresh()     1556
    ViewRowSetImpl     execute()     548
    ViewRowSetImpl     executeQuery()     564
    ViewObjectImpl     executeQuery()     2614
    MDPanelTrefwoordsoortenView1TrefwoordenPerArchiefeenheidView4     sync_Tad_met_Tst_en_Ahd()     194
    MDPanelTrefwoordsoortenView1TrefwoordenPerArchiefeenheidView4     access$5000071()     14
    MDPanelTrefwoordsoortenView1TrefwoordenPerArchiefeenheidView4$1     navigated()     96
    RowSetHelper     fireNavigationEvent()     257
    ViewRowSetIteratorImpl     notifyNavigation()     2938
    ViewRowSetIteratorImpl     next()     1332
    ViewRowSetIteratorImpl     first()     1145
    ViewRowSetImpl     first()     2242
    ViewObjectImpl     first()     4396
    JUIteratorBinding     rangeRefreshed()     305
    RowSetHelper     fireRangeRefreshed()     168
    ViewRowSetIteratorImpl     notifyRangeRefreshed()     2897
    ViewRowSetIteratorImpl     ensureRefreshed()     2231
    ViewRowSetIteratorImpl     refresh()     2412
    ViewRowSetImpl     notifyRefresh()     1556
    ViewRowSetImpl     execute()     548
    ViewRowSetImpl     getMasterKeyValues()     2955
    ViewRowSetImpl     getParameters()     2899
    ViewRowSetImpl     getRowFilter()     314
    ViewRowSetImpl     execute()     515
    ViewRowSetImpl     getRowCount()     1453
    ViewObjectImpl     getRowCount()     4603
    MultimediaViewPanel$1     _updateButtonStates()     39
    JUNavigationBar$2     run()     969
    InvocationEvent     dispatch()     154
    EventQueue     dispatchEvent()     337
    EventDispatchThread     pumpOneEventForHierarchy()     131
    EventDispatchThread     pumpEventsForHierarchy()     98
    EventDispatchThread     pumpEvents()     93
    EventDispatchThread     run()     85I should underline again that I use a customized version of JUTableBinding. When I remove that file from the project, so that the default version is used, this output is not displayed.
    For your information, this is the fragment in the customized file which loads the DebugDiagnostic class (line 670 to be exact):
    668:      void updateNavigated(NavigationEvent event)
    669:      {
    670:         DebugDiagnostic.println("Navigated to " + event.getRowIndex());
    671:         // This is to go through the case the navigation event arrive first.
    672:         // Since we are navigating there is at least one row.
    673:         // if (rowCount == 0)

  • HT1473 I have a ton of songs in my itunes that were burned from cd.  My computer died so I'm using another computer.  The new computer will show all my purchased songs from Itunes, but none of the ones I previously burned from cd

    I burned a ton of songs from CD to Itunes and they showed up fine in my library.  I bought a new Ipod at the same time my computer died so I'm now using a totally different computer.  I logged in to my Itunes from this computer and can see every song purchased from Itunes.  What I no longer see are the ones burned from cd.  

    Does this iPod have the contents of your library? If so see Recover your iTunes library from your iPod or iOS device. Otherwise, depending on the nature of the failure, you may be able to extract the hard drive and recover the media from it. Or you will have to rip your CDs again.
    If you'd like access to all your media on any device/computer in future you might consider purchasing a subscription to iTunes Match though personally I just maintain my own backup of my library.
    tt2

  • IMovie is not showing all of my videos from iPhoto, can I rescan?

    My wife and I have an iPhone 4 and 4S.  In addition to our camcorder, we use our phones to record video.  For some reason, some of our videos in iPhoto are not being shown in iMovie.  Most are, but some videos that are several months old are missing.  Is there a way to rescan iPhoto for these missing videos?  We normally view them in iMovie under the iPhoto section.
    I am running the latest iLife programs and have Snow Leopard.
    Thank you for your help if you can.
    Matt

    After calling Apple (they were no help and I was disappointed) I kept searching in the Apple support community and found the answer. 
    To get iMovie '11 to show the iPhoto videos under the event library on the bottom left of iMovie, you simply have to empty your iPhoto trash.  Once the trash was emptied, I restarted iMovie and the problem was fixed after iMovie did a search and showed the thumbnails of the videos. 
    Again, this info came from another person on the support community.  Hope this helps someone else.
    Matt

  • Magic Bell custom sound comes from where?

    This custom sound has probably migrated from older system of mine for many years now. It's found in the USer Library/Sounds folder and is called "Magic Bell.aiff" but I can't for the life of me remember where I got or better yet, which Application may have installed it for me. Anybody know how to solve this mystery?

    You probably have sound "muted" which silences the speaker for certain sounds, I.e., game sounds, etc.
    Turn off "mute" via the side switch on the iPad (if the switch is configured so).

Maybe you are looking for