Show all nodes in a hierarchy

Hi all,
I am working with a report where I am showing a hierarchy. I am wondering if it is possible to see all nodes in the hierarchy, that is even if some nodes do not contain data. By default only the nodes that contain data are displayed. How do I show all nodes in BI 3.5?
Thanks in advance!
CL

Hi CL,
You can try following. 
Make sure you have  some data in say  KF A  for the   each node  even if it is zero in the cube  on which you are creating report Add this KF A to your query and Hide the KF. Make sure you do not have any restrictions to this KF A.
I just took example KF A  . This can be any of your KF in the cube  or a Calculated KF,
Jaya

Similar Messages

  • Hyper V Manager doesn't show all nodes

    I have 5 nodes in HyperV... Say HV01,02,03,04,05 which shows correctly in Fail over Cluster Manager. But it doesn't show up in HyperV Manager. 
    The HyperV Manager just shows 3 Nodes, say 01,02,03. What could be the possible issue?
    A reply will be highly appreciated....

    Hyper-V manager shows only servers you added manually to the console. You need to add missing nodes manually (right click on 'Hyper-V Manager' -> Connect to Server)
    http://OpsMgr.ru/

  • Show all Hierarchy Nodes

    Hello,
    i need to show all nodes of a hierarchy even if there are no values on some of the nodes.
    what adjustments do i need to make to show them all?
    thx

    Hello,
    I'm trying to learn about hierarchies & several of these postings are taking me to sap help portal.  Once I'm there it goes to CA Drilldown Reporting & it sounds like allot of cool features but I don't know what this is etc...
    I'm familiar with the BEX Reporting Tool.
    Can someone tell me what CA Reporting is?
    Thanks,
    Tammi

  • 11gr2 rac installation on vmware runinstaller not able to visible all nodes

    Hello,
    Recently I have installed two nodes 11gr2 rac on vmware workstation 6 with OEL 5.4. CRS installation work fine. But after that when I do olsnodes, it's shows only one node. Also, when I try to install oracle database binary, in node selection tab, it's shows only respective nodes and not shows all nodes.

    Installation of 11gr2 Grid was successfull or not?
    Try to check the status of High Availability service daemon by typing the following command:
    ./crsctl check cluster. (on all nodes)
    The output should look like this:
    CRS-4537: Cluster Ready Services is online
    CRS-4529: Cluster Synchronization Services is online
    CRS-4533: Event Manager is online

  • 0ORGUNIt time dependent hierarchy not showing all valid nodes in BO , but in BW its correctly shown

    Hi All,
    We have 0ORGUNIT hierarchy shown in one of the Webi reports. 0ORGUNIT is time dependent hierarchy.
    In BW report we can see below nodes for hierarchy
    Hierarchy                     Valid From         Valid To
    Z05 Root Company        01.07.2013        31.12.9999 - Parent node
        Z05 Branch 2                 01.10.2013        31.12.9999 - Child Node
        Z05 Division                   09.12.2013        31.12.9999 - Child Node
    In BO webi we can see only two nodes
    Z05 Root Company        01.07.2013        31.12.9999 - Parent node
           Z05 Division                   09.12.2013        31.12.9999 - Child Node
    Any idea why in BO webi the other node is not shown ? This is happening only for time dependent hierarchy and only in BO not in BW.
    Thanks,
    Shraddha

    Hi Shraddha ,
    Check at webi query panel level any restrictions applied to hierarchy levels.
    Check at BEx query level,select 0ORGUNIT ,hierarchy -Expand to level .
    Here specify Max level.
    lastly, check any filters/restrictions applied on data.If yes,remove restrictions.

  • Strange issue in Oracle ASM on Two node RAC where in one ASM node shows all diskgroup while other node shows  missing node.

    We have Oracle datbase 11gR1 in RAC node with Oracle ASM.Recently our database server got crashed and we are trying to restore back services.
    Using Snapshot technologyBusiness copy we had synced all our disk on storage level. Post this when we are trying to start ASM instance on node 1 it is coming and showing all diskgroups but on other node it is throwing errot with missing e diskgroup.
    ORA-15032: not all alterations performed
    ORA-15040: diskgroup is incomplete
    ORA-15042: ASM disk "5" is missing
    Expert please share your views.
    Thanks,
    Tushar

    The I/O fabric layer on the other node failed to mount all storage LUNs - resulting in ASM being unable to mount a diskgroup as there are missing disks in that group.
    Rebooting is exactly what could be needed to reset the h/w and infrastructure used by that node, in order for it to see all the storage disks again. As node 1 sees all storage disks (and is working), the disk itself on the storage system is intact and usable.
    What is the o/s? What is the fabric layer? What is used on o/s for dealing with the I/O fabric layer?

  • ICWC: table shows all attributes of context nodes instead of the configured

    Hi,
    after adding an attribute by the assistant (from a BOL-relation of the root object) and setting it to the configuration, the table shows ALL attributes (~20) of the context node. With F2 in the browser I can see, that the right configuration was found (with 5 attributes). Clicking the customizing  icon of the table, the popup is showing the configured attributes. Doing a "Set to default" has no result.
    Removing the added attribute: no change.
    Removing all attributes: no change
    Deleting the configuration and create a new one with the same name: no change
    Please help!!!
    Thanks,
    TW

    Hi everyone,
    the previously described problem could be solved by removing the enhancement of the View and creating a new configuration. The creation of only a new configuration has not solved the problem. However, removing a view enhancement can not be the solution for such a problem!
    Now again we have the problem after adding an attribute at the context node used for the table, the configuration seems to be damaged and the filtering of the attributes does not work. Thus, all available attributes are used. Debugging in the htm-tag has shown that the XML for the configuration is correct and read in the view. Further debugging has not shown any exceptions or any hints on the weird behavior.
    Had anyone of you the same or a similar experience and solved this in another way than removing the enhancement of the view?
    With best regards,
    Kai Lienemann

  • Web Interfaces: BPS-Hierarchy: Collapse/ Expand all nodes

    Hello,
    having a bps hierarchy in a web interface, is there any way to collapse/ expand all nodes at once (via a button)?
    Cheers,
    Simon

    Simon
    Web interface does not support the collapsing of hierarchy.
    it will automatically expands hierarchy.
    Thanks,
    Raj.

  • Is it possible to display lower nodes in a hierarchy without top nodes?

    Hello:
    I am working with the Query Builder in SAP BW 3.5.  We enter date, profit center and responsible organization to get labor data and WBS hierarchy output.  We would like to show all the data associated with the WBS hierarchy at level 3 and below level 3, such as level 4, while skipping level 1 and 2.  Is there a way to restrict the output of the query somehow to do this?  We were thinking of using the level attribute of the WBS to filter the output, but are unsure about how to do this.  Should we try using VBA to filter the output?  Or is there ABAP user exits to filter output?  Or should we somehow tell SAP BW "Please only give me data where the WBS level attribute is greater than or equal to 3".  Thank you for you help.  I am somewhat of a query newbie.  I've tried hierachy variables, but it seems you have to spell out which WBS value as opposed to having a condition on the level attribute...conditions seem to only apply to key figures such as rate..

    I've tried to use hierarchy node variables, but it seems like you can't specify a attribute of the hierarchy such as level.  So with the WBS hierarchy, if you create a hierarchy node variable, you specify the WBS value to select (If I understand this correctly).  I wish I could instead specify "give me all the WBS nodes that happen to have the value of the level attribute greater or equal to 3.  If I understand Juergens post, he is saying make security access so that only certain WBS levels can be returned in the query.  I suppose we can try that, but that would then preclude getting the level 1 and 2 in the future if the authorization is global.

  • Show all the structure in the Query

    Hi people,
    I would like to know if there is some way to show all the structure I created by hierarchy to my query, enven if some nodes there isn´t any data.
    I have configurated to show only the lines there is amount. It means it won´t show the lines that have zeros.
    But the structure (all of the nodes) I would like to show, include that one there aren´t any datas.
    Thanks in advance,
    Rosana.

    Jaya,
    You are 10. It worked!.
    I only will leave opened this request yet because I would like a new suggestion.
    For exemple, I have the hierarchy but on the side "colum"  I already have a structure where is restricted by data because it is a report  "Year to Date".
    On this case, is it possible to do something to show all the structure of the hierarchy?
    Ps.: If it is necessary close this request and open a new one, you can tell me ok?
    Thanks a lot,
    Rosana.

  • Unable to see  hierarchy nodes for a hierarchy in Query designer

    For IO 0GL_ACCOUNT, we have many hierarchies defined.
    In the query designer when i am trying to restrict the 0GL_ACCOUNT with one of the hierarchy say Hier1 the corresponding hierarchy nodes should be displayed so that i can select any nodes of my choice and can restrict.
    Strangley instead of showing hierarchy nodes,it is showing" [ ]" with out any values.Checked in RSA1 ,the hierarchy with all nodes visible perfectly.No authorization settings created on any of these hierarchies.
    hierachy is in active state.
    Appreciate any suggestions on this.
    Regards,
    Swapna.G

    Before restricting you need to select hierarchy for the characterstic and tick the activate hierarchy display checkbox

  • Report to show all superiors of an employee

    Dear Group members,
    My client wants a report to show all the hierarchial superiors of an employee. For eg- his  superior,his next superior and so on to to the chief officer. Is there any report for this scenario

    Hi kaustubh,
    Try report RHSTRU00 with evaluation path O-S-P.
    Regards,
    Dilek

  • Solaris command to show all network interfaces in a server (plumb/unplumb)?

    Hi there,
    Is there a Solaris command to show all the network interfaces in a server
    (plumb/unplumb etc...).
    I have a V880 that has an eri0 on board, plumbed up. It also has a couple
    of ge0, ge1, and ce0, and a qfe card.
    ifconfig -a only shows eri0.
    (I am using something like "dladm show-link", but this is really for
    the link-aggregation).
    How do I show the remaining network interfaces?
    Thanks
    Tony

    You can see all installed interfaces by running 'grep network /etc/path_to_inst'. An example:
    grep network path_to_inst
    "/node@1/pci@8,600000/network@1" 0 "ge"
    "/node@1/pci@9,700000/network@1,1" 0 "eri"
    "/node@1/pci@9,700000/pci@2/network@0" 0 "ce"
    "/node@1/pci@9,700000/pci@2/network@1" 1 "ce"
    "/node@1/pci@9,700000/pci@2/network@2" 2 "ce"
    "/node@1/pci@9,700000/pci@2/network@3" 3 "ce"
    "/node@1/pci@9,600000/network@2" 4 "ce"
    shows, ge0, eri0, ce0 - ce4

  • SHOW ALL in sqlplus

    Hi,
    http://download.oracle.com/docs/cd/B28359_01/server.111/b31189/ch12041.htm#i2699447
    SQL*Plus® User's Guide and Reference
    Release 11.1
    Part Number B31189-01
    SHOW ALL
    Lists the settings of all SHOW options, except ERRORS and SGA,
    in alphabetical order.xquery is not listed
    should be
    Lists the settings of all SHOW options, except ERRORS, SGA
    and XQUERYin alphabetical order.SQL> show xquery
    xquery BASEURI "" CONTEXT "" NODE DEFAULT ORDERING DEFAULT
    SQL> show all
    underline "-" (hex 2d)
    USER is "SCOTT"
    verify ON
    wrap : lines will be wrapped
    errorlogging is OFF
    Also not that ERRORLOGGING is displayed after WRAP, which breaks the alphabetic order.
    Regards
    Laurent

    Thanks Laurent. I'll report this to the SQL*Plus doc people.
    Regards,
    Diana

  • Integrated Planning - On a summarized node in a Hierarchy

    Hi All,
       I am planning on a hierarchy ( integrated planning ) i was able to write back values into the real time info cube when i plan on a leaf nodes but when i try to plan on the summarized nodes its not letting me do so.
    Any ideas on how to resolve the issue.

    Suresh,
    You can plan on any node on the hierarchy as long as they are postable. By that I mean that the node is a real characteristic value as opposed to a 'text node' - i.e. one created in the hierarchy builder.
    Hope this helps

Maybe you are looking for

  • HT1918 why dose it tell me when i put card details in thats the payment processing is temporarily unavailable?   fix this bug cant download anything.

    It started sunday an now can even download any apps music or films so how can i correct this if they wont accept my security code to download stuff. plus i tryed setting up a new account an that dosnt let me add any details. I want apple to fix this

  • Error while using the z t-code

    Hi ,      We have created a z t-code and when we enter that we are getting an error msg that "Please schedule the program in background" . The program that was created is scheduled to run in back ground but we are getting this message when we execute

  • Timed out Problems to using the Solar_project_admin transaction

    Hello everyone! I'm trying to create a project in the Solution Manager using SOLAR_PROJECT_ADMIN transaction but we receive the timed out error message and the process is stopped. Could help me ?

  • New tab will not open web page

    *error message when opening firefox= "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and

  • Changing console font.

    Console font is huge. I see the font variable in rc.conf, but not sure what to do to make it smaller. All the font names look like gibberish, and I don't want a new font. I just want this font smaller, so that the screen can show more than 25 lines a