Show an Image on a different slide

I've seen something similarin this forumn to what I want to do, but still not getting it to work. Any help would be appreciated.
I have an image on slide 1 which has visibile unchecked in properties.... so it does not initially display when slide 1 is displayed.
When they get to a certian slide I have a click box. When clicked I would like Captivate to jump back to slide 1 and display the image.
I can get Captivate to jump back to the slide, but cannot get it to show the image.
For sake of this discussion, I have slide 1, 2 and 3.
Slide 1 has a yellow box with the visible unchecked in the properties.
When the learner gets to slide 3 I have a click box with the following Advanced actions.
I think I'm close but I'm missing something.

Hello,
You are on Captivate 4, that is a pity, because I did blog a while ago about hiding and showing objects but in Captivate 5. However the principles are the same: you can not show an object unless the action is executed on the slide where the object sits. Hope this makes sense?
So in your case, you should perhaps create a user variable, originally=0 and that you change to 1 when the click box is clicked in the action on the slide with the click box. And then you will need a conditional action, to be triggered on entering the slide where the image is. This action checks the value of the user variable, if it is 0 the image will be hidden, if it is 1 it will be shown.
Here is the link to my blog post:
Playing Hide-and-Seek with Captivate objects
I'm willing to help you if you cannot work it out.
Lilybiri

Similar Messages

Low image quality on idvd slide show DVD

Hi, I am trying to create a DVD that will play wildlife images. I have the images (In high ressolution, edited at photoshop CS2) and an audio file (Wildlife sounds)
I went to IDVD, choosed a theme, added an image as the entrance, add a slide show, added the images to the slide show, added the sound to the slide show and exported.
My settings in idvd are set to best quality.
The resulting DVD presents very low quality, saturation has decreased immensly, sharpness is gone. Audio VERY loud.
Is this the best quality iDVD can provide? Shall I use FCP (I wish to avoid it since I will like to make new versions of the cd as long as new images arrive, iDVD, if it provides good quality, will make life much easier.
By the way, I tried exporting a slide show from iPHOTO to iDVD but the resulting quality is extremely poor. I also tried to prepare the slide shows on iMOVIE but the results I get are not good either...
Is there anything I ma doing wrong? Should I change the settings somewhere womehow? or Should I forget about iDVD?
Hope to receive an answer soon. Thanks for your time. Cheers.
Jorge

See Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html
I have the images (In high ressolution ...
Basically, that's an overkill. At this point (pre-HD capable burners) we are limited to the less than 640x480 pixel resolution of the NTSC system (or 768x576 pixel resolution of PAL).
You slide show should look 'fairly good' on a TV set or on your computer monitor viewed at 640x480.
Sorry.

When I create a DVD slide show, the images on TV are 4:3 instead of 16:9. Fix? (Using version 11.)

When I create a DVD slide show, the images on TV are 4:3 instead of 16:9. Fix? (Using version 11.)

Hi Christina,
I used it because other facets of my work in graphics require conversion, not just FCP, so I am used to popping it open quickly using it on the fly, in the field when shooting. I back up, then convert typically on my laptop while it sits on the seat of my pickup while I am photographing the next portion of the training. I do have the files backed up (in ordered structure as shot and preserved on the cards) both on my laptop, also mirrored in the RAID and once again on a second external firewire LaCie and make sure that every little file is in there as it should be. Thanks for the info. on that though, appreciate it. Will probably switch to using FCP to that level of Log and Capture in the future because it seems more basic. I am not sure using L&C would make any difference on the problem I seem to be having here. I will create a small sample file and give it a try for future reference. Again, thank you.
Up until this week the Quicktime conversions I have been creating and composing from have been compressed in H.264 (720 X 480 to fit our LMS stage), and have been working well without a hitch. And 8 of the 11 of these sequences are still exported to a true 16:9 without a hitch. They are sharp, bright and the color is great. The three orphans are also sharp with good color, however squished from side to side. It simply makes no sense that data that has been saved identically, edited identically and exported with identical settings would change in mid-stream like that.
Thanks for taking the time to reply. I do appreciate that very much.

Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install. The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years. Lots of pictures in the 55 gb are not showing for some reason.

No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
LN

Preview app shows png image as transparent window

When I open a PNG file in Preview.app, it doesn't show the image. it just shows a transparent window the size of the image. I can preview the image in the Finder fine. Note the transparent window in the screenshot:
Is there a cache or preference file I should delete?
Thanks,
-Scott

Here is another thread on similar issue
Preview - Outline only appears?
There are at least two different solutions within it - one involves a separate (free) program called Etrecheck, the other possible solution does not.
Did you recently update? And what system are you having this issue with? On the MBP or Mac Mini?

Images in Tableview Filter not showing as image

I have 2 CRM 7.0 systems which act differently concerning Table Views in the WebUI.
If for example the Activity Search Result List shows the Images for Due, Overdue and Not Due, they are displayed correctly in the TableView itself.
But when i'm clicking on the column header to filter the values, i do not get the images shown, but the image path, e.g.
img src="/SAP/BC/BSP/SAP/thtmlb_styles/sap_skins/default/images/1x1.gif"
In the other CRM System, i get the Images in the Filter List.
Both Systems are not modified at this point, does anyone know how to get it to work that the Images are shown instead of the HTML-Code?
Many thanks,
Tobias
Edited by: Tobias Abb on Feb 24, 2010 10:29 AM
Edited by: Tobias Abb on Feb 24, 2010 10:30 AM

Hi Tobias,
the issue was reported before and the note 1325346 should address this. Could you please make sure, that this note is properly installed in both systems? In addition, you should check to clear your browser cache.
Best Regards,
Michael

Rendered html pages in results file(html) not showing the images of origina

hi,
rendered html pages in results file(html) not showing the images of original page
when i click on rendered html pages of different html section of a results file.
both master and tested as well.
thx
pasumarthi

By design, the report will not show the images, will not apply imported css or javascript files and will not show framesets. Also, in the case that an image is shown there is no guarantee that that was the image that was seen when recording/playback the script.
The rendered html pages that are shown in the report only contains the structure of the html page. If an image is shown the image will be a reference to the location of the image and not a saved copy of the image as part of the report. If the website has a simple structure this can give an idea of what was different. If the website relies extensively on images, stylesheets or javascript to present the information then this report feature becomes less useful.
Few weeks ago I requested a feature request in order to be able to see in the report the page exactly as it was when recording the script and exactly as it was when the script was played back. In the way that the feature request was written it specifies the use of screen captures or saving the page as a pdf file.
Regards,
Zuriel

Need to show the images in calculated column based on the condition in sharepoint 2013.

Hi ,
I'm working in sharepoint 2013, In this i want to show an image in calculated column based on the condition, but image is not showing .
In sharepoint 2010 its working with help of javascript in content editor on the same page. Same thing i tried in SP 2013. but doesn't work.
Could any one please give proper solution for this?
Thanks in advance.
by,
Siva.

Hi please provide the JS you have used in the content editor as well as the calculation for the column so we can better understand what's maybe differs?
Blog: chrisstahl.wordpress.com Twitter:
@Cstahl

Images page in different language

The language on my images pages is different, Czech, I think.
How do I reset to English. Only page effected and is not an issue when using IE.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Names of objects for multiple actions in different slides

I am trying to develope an interactive software guide which
requires something like a panel to insert it in each slide. This
panel contains precise instructions on how tu use the interface
visible in the current slide.
The problem is that sometimes the panel hides part of the
interface. I would like to have a button somewhere in each slide so
that the student can simply hide the panel when is obscuring
something important. I don´t have any problem for preparing
one panel for one slide using multiple actions for hiding or
showing the panel, captions, buttons, etc. But the problem is that
in each slide the similar objects have different names assigned
automatically by Captivate. I found no way to assign same names in
different slides so that afterwards, assigning multiple actions
would be only a matter of copy and paste from slide to slide. I
tried to think something with variables but I gave up.
I am using Captivate 4 Trial. Somebody has a nice good idea?
:)

Hi,
Inorder to give same name to the objects in different slides,
there is a workaround. Immediately after opening a project, give
the same name to the objects in different slides.
Hope this solves your problem.
thanks
ravi

Photoshop problem (not showing the image)

hy,
i just installed photoshop on my new laptop and it does not show any images when i open them.
like you can see in teh image that i posted i have a picture opened (its also so in a layer)
i can use photoshop but i dont see anyting changing in the normal area( is does change in the layer box.)
i tried with different pictures
pleas help

Chris Cox wrote:
And my money would be on a video card driver that needs to be updated. Disabling OpenGL drawing should avoid the issue temporarily, but the bug is in the video card driver. (we've seen this a lot with older drivers)
where can i find the disabling OpenGL Drawing?
i have a NVIDIA GeForce GT 540M
My money is on your document window being off screen.
At some point you may have had a secondary monitor attached which you have since disconnected, or you drastically changed your monitor resolution.
Trashing your preferences should fix it instantly:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
i tried this but i did not work. (however i do work with diferent screens)
thanks already for you efforts

Show Default Image when actual Image is not available

Hi,
The Customer is using BI Publisher to generate a Report with the Inventory Item Details. This report also shows an Image of the Item. These Image files are stored in a different server.
We are able to dynamically show the Image based on the Item Numbers using the URL{} tag.
We are facing an issue when there is an Item when there exists an Item with no corresponding Image File. The PDF is generated without any image. In such cases, the requirement is need to display a Default Image showing "NO IMAGE".
During XML Extraction, we do not know whether the Image file is available in the server.
How do we handle this specific requirement.
Any assistance is highly appreciated.
Thanks and Regards,
Balachander.

Having raised a service request with Oracle, it would seem that this is not possible -
"Unfortunately, In the BIP core, there is no functionality to test that a file ( containing an image ) exists or not ."
The problem I have is that the URL referencing the image is concatenated and includes the XML item for a reference number. That reference number, and therefore the XML item, is always available but the image that corresponds to it is not - so I can't test for a null or false return because BI Publisher does not recognise the concatenated string of the url as having a returned value.
This would be a problem if the layout options in Word were more flexible (better) - being able to add an image to the background of a table or cell would have solved my problem but, sadly, that is not possible in the version of Word I'm using (2003). I'm not sure whether it's possible in newer versions though?

Imported AVI files show the image doubled

hi,
I am using Premier Elements 7 and when I import a recorded AVI file the video portion shows up twice. If I play the video in media player, or nero recorded content is single. It only shows doubled in Premier Elements 7.
I have imported the image from several different sources and machines all with the same results.
Any ideas why?
Machine Quad core Dell
4 gig ram
Window Vista Bizz

hi I have the screen shot you asked. As for the rest of it, This is part of a security system (CTG Software) that we have had for 10 locations and over 3 years. I periodically have to attach to videos together for the legal purposed because one camera has audio and the other does not. Nothing has changed with this system in the 3 years we have had it. This problem did not start until about a month ago when I bought version 7. I did an upgrade from Version 3....
I did finally get it to work by converting the image to a different format. (used Nero to make it digital and imported that and it looked fine) Fortuneately it was a short video. Would like to figure out why PRE is doing this with this version. Its a lot of extra steps to do if I have a larger video.
Yes the Image is doubled in the timeline as well.

Show an image on a JPanel with GridbagLayout

Hi All,
I have a serious problem: I'm building a GUI with following characteristics:
JFrame in which is inserted a JPanel. This Jpanel has a GridBagLayout.
In this JPanel are shown diefferent Component types (JTextField, JTextArea, JLabel and so on).
I would show an image on a apecific free part of this JPanel, without move actual components distribution.
Now the image is automatically reduced to be insert in a "line/column" according to GridBagLayout, but I don't want this!!!!
Help me!!!
Thanks in advance!

Hello,
You are on Captivate 4, that is a pity, because I did blog a while ago about hiding and showing objects but in Captivate 5. However the principles are the same: you can not show an object unless the action is executed on the slide where the object sits. Hope this makes sense?
So in your case, you should perhaps create a user variable, originally=0 and that you change to 1 when the click box is clicked in the action on the slide with the click box. And then you will need a conditional action, to be triggered on entering the slide where the image is. This action checks the value of the user variable, if it is 0 the image will be hidden, if it is 1 it will be shown.
Here is the link to my blog post:
Playing Hide-and-Seek with Captivate objects
I'm willing to help you if you cannot work it out.
Lilybiri

Make a button hide and show an image

I want a button to hide and then show an image, basically an on/off switch. I tried accomplishing this using multipl slides that jump around but even after removing all transitions, you can still tell that the slides are changing instead of just the image appearing and disappearing. I have seen some posts about advanced actions but it's reading clear as mud.

Christina,
If you want a toggle button, that can be done with advanced actions. What did you read already? And which version of Captivate are you using?
The idea is that:
You create the image, but set its visibility unchecked in the Properties panel
You create a user variable, will label it v_visib that has a start value of 0, will be set to 1 when the image is visible
You create a conditional advanced action, that will check the value of v_visib:
IF v_visib is equal to 0
    Show Image
     Assign v_visib with 1
ELSE
    Hide Image
    Assign v_visib with 0
I blogged several times about toggle buttons:
http://lilybiri.posterous.com/toggle-shape-buttons      for Captivate 6 only
http://lilybiri.posterous.com/toggle-button
Lilybiri

Show an Image on a different slide

Similar Messages

Maybe you are looking for