Show and Share 5.3.10 upgrade image

Can someone tell me where I can find the Show and Share 5.3.10 upgrade image? I've looked on the usual Cisco Downloads section for Show and Share and can only see 5.3.7 and 5.3.11 (but no 5.3.10). I need 5.3.10 to be able to upgrade beyond 5.3.7 as the upgrader won't allow me to skip to 5.3.11/12..
thanks

Hello
1- As you mentioned , i did not see v 5.3.10 . I think you have to contact Cisco TAC , for sure they have answer for that.Ask about what is the replacement if there is no v5.3.10 because as per document only
v5.3.10>v5.3.11>5.3.12.
2-you have to make sure that you hardware support v5.3.11/12.
http://www.cisco.com/c/en/us/td/docs/video/digital_media_systems/5_x/5_3/showandshare/upgrade/hardware/SNS_5-3-10_Rel_Notes.html#76179
3- if you are unable to get software v5.3.10 . you can do the following.
A- download the new image for v5.3.11 or v5.3.12
B-burn it on CD as iso image
C-Take a backup for existing show and share contents .
D-Do a fresh installation for 5.3.12 , then do restore.
Thanks
please rate all useful information

Similar Messages

Show and Share publishing fail

Hiii ...
Anyone have experience failed when publishing from show and share ...
I get errror message in show and share.
Sorry, your publishing attempt failed
was:dms.core.deployment.dao.insert.error
I experince like this :
https://supportforums.cisco.com/message/3799411#3799411
My account setting have priviledge to publis video
Anyone have any idea ?
BR,

Is this a VMware Demo Image or the Actual SnS Appliance?
Actual SnS appliance
Please provide the following Screenshots:
- From the AAI interface, provide the "Show Info" screen (For the DMM & SnS)
- From the AAI interface, provide the "Date and Time Settings" screen (For the DMM & SnS)
- From the AAI interface, provide the "Appliance Control-->Pair Appliance-->(DMM\SnS)"
- From the SnS Web Admin, provide the "Administration-->Setup-->Show and Share" screen
- From the SnS Wen Admin, provide the "Manage-->User Roles" for the Username of the one
experiencing the issues.
Can you access the URL (from your Browser)
http:///content/vportal/C-859b1b03-21f0-4026-be5f-593f581b203c_1/1276541026863WebCamCapture.flv
directly?
No. The page errors out. I tried http://server:8443/ & http://server:8080/ both error out.
What Browser Application & Version are you using when the error occurs?
Safari 4.0.5 & MacOS 10.6.3 & Flash 10.1
For some reason I cannot get past the flash applet with Firefox 3.6.3 on MacOS 10.6.3. I upgraded to Flash 10.1 hoping to remedy that, but it didn't matter.
An addiitional note: I can upload a video just fine.
Thanks for the help Tom!
-Jon

Can't set File Hosting Locations on Show and Share

Hi,
I'm currently using Show and Share 5.2. I have it peered with the DMM and everything for the most part seems to be working fine. The problem that I'm having is that I can't seem to set and save the File Hosting Locations. I set it to store locally and it shows a valid password, but it will not save the setings. I've tried this in multiple browser: the latest firefox and IE. Any ideas?

Are you using the Actual Appliances or are you testing with VMware images?
Please gather and upload the following screenshots:
* Go to the AAI interfaces for BOTH the DMM & the SnS. Please provide a screen capture
of the Pairing status screens for each appliance.
* Go to the DMM --> Admin Module and get a screenshot of the services for the DMM & the SnS.
Is there any error when trying to save settings? Please provide the screen shot
of that..
Thanks
T.

Cisco Show and Share – Last update?

Hi,
We’re currently using Cisco Show and Share as our internal video platform.
I believe there hasn’t been any form of update to the platform in more than 2 years and am wondering if we have missed something.
At the bottom of our interface we have the following text:
Show and Share and the Digital Media Manager are part of the Cisco Digital Media Suite.
© 2002-2011, Cisco Systems, Inc. All rights reserved. Warranty and End-User License Agreement
Does the 2011 date refer to our last update? This seems quite old if it does.
Any insight would be appreciated.
Regards,
Callan

Hi Callan:
That depends on the application(s) you're running, releases past 5.3.10 are supported only on a Cisco MXA UCS M3 server.
There is some info about that at http://www.cisco.com/c/en/us/products/collateral/conferencing/show-share/datasheet_c78-711706.html
Then there is also the following document covering 5.3.10:
http://www.cisco.com/c/en/us/td/docs/video/digital_media_systems/5_x/5_3/showandshare/upgrade/hardware/SNS_5-3-10_Rel_Notes.html
Systems that can be migrated to a Cisco MXA UCS M3 server for SnS are:
UCS 210-M2, UCS 200-M2, MCS 7835-H3, WAVE-574.
Systems that can be migrated to a Cisco MXA UCS M3 server for DMM are:
UCS 210-M2, and MCS 7835-H3.
If you are running on another hardware platform (7835-H3 or UCS210, very likely because of the version you are on) then the following upgrade and/or hotfix information will still be of interest to you and you may have a path to 5.3 depending on what you're working with. A critical hotfix may apply to your system, and the following document guides you in the form of "if you are running _____, then do ________."
http://www.cisco.com/c/en/us/td/docs/video/digital_media_systems/5_x/5_2/dms/release/notes/dms52rn.html#wp266747
5.3.7 still supports some older platforms, check this to see if your system is among them:
http://www.cisco.com/c/en/us/td/docs/video/digital_media_systems/5_x/5_3/showandshare/upgrade/sns537rn.html#wp301513
Regards,
-Rob
Any information provided as a member of public community support forums is provided as-is and is not warrantied by Cisco or endorsed by TAC.

Show and Share custom style sheet

Is it possible to install a custom css on Show and Share? How can I do it?
We have our own style sheet con our company's Look&Feel
Thanks
Manuel Blanco
Sent from Cisco Technical Support iPad App

Hi Manuel,
At the moment, the Show and Share allows you to customize colors, background image and company logo.
Installing a custom CSS would be an interesting Enhancement Request, I would recommend you to follow up with your Cisco Account team on this.
Regards,
Marco

Uploading YouTube videos/urls into Cisco Show and Share

We've just purchased the DMM 5.2 and the Show and Share appliance to host internal company videos but there are some YouTube videos out there that we want to pull into our Show and Share system as well. How can we do this? I've tried every possible combination of youtube url and embedded url that is out there, at least nothing that I've tried has worked thus far. I'm able to pull in other internal URLs of different videos (wmv format) without any trouble. Is this an issue with YouTube or perhaps with flv formatted video that YouTube uses (which should work according to the manual).
I know this is a new product, but is there anyone that can help?
Thank you in advance,
Chris

Chris,
The YouTube videos are typically Flash content.
The key here is that you need to download the Flash content
yourself and then Upload to the Show and Share.
Use the DIRECT URL of the Flash Content on YouTube to download
the FLV to you Personal device. After file successfully download, simply
upload the file to Show and Share.
For example:
Cisco Show and Share Flash Demo
http://www.youtube.com/watch?v=ZzquCVvS0qQ
* this link is the actual Dashboard URL not the video link
http://v4.lscache8.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWRlRRVF9FSkNNNl9MS1hB&fexp=904405%2C901902&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1271466000&key=yt1&signature=1E65C92607546EA03DE0D1082884574D3F58AD0F.93FF9FDB00B10B44BBB52F31AADF3EB50FCEB7CC&factor=1.25&id=673aae095bd2d2a4&
* Actual URL of Video Content
========================================================
FOR THOSE THAT ARE USING OSX & SAFARI:
======================================
If you need to download FLASH Content for TESTING in your DMS Solution, You
can download Flash Videos from YouTube.
Note: The Video Quality is NOT HD or even SD... it is ID (Internet Definition)
      Also, the downloaded file will be a .flv Flash File.
1. Open a Video on YouTube, Google Video etc.
2. Press "Alt+Cmd(Apple-Key)+A" - A window opens named "Activity".
3. Select the ".flv" file (looking on filesize helps) and press "Cmd(Apple-Key)+C" to copy.
   Paste with "Cmd(Apple-Key)+V" the URL to your Adress Bar and press Enter.
4. If you need a different video format such as MPEG, WMV, or SWF; you will need to convert
   the downloaded ".flv" file with VisualHub or VLC
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

Uploading Youtube Vid. URL to Cisco Show and Share failed

Uploading Youtube Vid. URL to Cisco SnS failed. I get error msg. : Connection to video server failed

Chris,
The YouTube videos are typically Flash content.
The key here is that you need to download the Flash content
yourself and then Upload to the Show and Share.
Use the DIRECT URL of the Flash Content on YouTube to download
the FLV to you Personal device. After file successfully download, simply
upload the file to Show and Share.
For example:
Cisco Show and Share Flash Demo
http://www.youtube.com/watch?v=ZzquCVvS0qQ
* this link is the actual Dashboard URL not the video link
http://v4.lscache8.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWRlRRVF9FSkNNNl9MS1hB&fexp=904405%2C901902&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1271466000&key=yt1&signature=1E65C92607546EA03DE0D1082884574D3F58AD0F.93FF9FDB00B10B44BBB52F31AADF3EB50FCEB7CC&factor=1.25&id=673aae095bd2d2a4&
* Actual URL of Video Content
========================================================
FOR THOSE THAT ARE USING OSX & SAFARI:
======================================
If you need to download FLASH Content for TESTING in your DMS Solution, You
can download Flash Videos from YouTube.
Note: The Video Quality is NOT HD or even SD... it is ID (Internet Definition)
      Also, the downloaded file will be a .flv Flash File.
1. Open a Video on YouTube, Google Video etc.
2. Press "Alt+Cmd(Apple-Key)+A" - A window opens named "Activity".
3. Select the ".flv" file (looking on filesize helps) and press "Cmd(Apple-Key)+C" to copy.
   Paste with "Cmd(Apple-Key)+V" the URL to your Adress Bar and press Enter.
4. If you need a different video format such as MPEG, WMV, or SWF; you will need to convert
   the downloaded ".flv" file with VisualHub or VLC
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

Show and Share integration with MS SharePoint?

Does Show and Share have any integration with Microsoft Share Point? Customer is asking, I don't see anything.

Dear
yes of course you can , kindly cheeck the below datasheet and the integration will be through API
http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_c78-477948.html.
There is other option i just read about it few days ago smarthub ASE.
Thank you
please rate if this will help

How to get cisco show and share

Hi,
I have a DMM with version 5.2 and saw that on my licesing I have show and share. But how do I install show and share? Can I install it on DMM server?Do I need to install it in another server? Where can I download it? I think the show and share installation is called SS-5.2.0.20.iso, but I do not found it on cisco support download section.

Mario,
Show and Share(SnS) is an Appliance just like your Digital Media Manager (DMM).
You have to purchase the Appliance from Cisco or a Cisco Partner. Then you have
to purchase use licenses for Authors etc... The Appliance software is not separate
from the hardware and is not downloadable.
Please contact your Cisco Sales Rep or Account for further explanation and they
can assist you with your companies needs.
Thanks!
T.

RSS Feeds in Show and Share

Hi all,
We have deployed Show and Share in our enterprise, and Cisco DMM with DMP licenses.
We would like to integrate the Show and Share updates using the RSS feeds, is it possible to disable the authentication requirement for the RSS feed?
Thanks in advance.

Mail in Mountain Lion no longer supports RSS feeds. You have to install an RSS feed reader, as the message suggested.
Regarding the Messages question, see:
http://www.mactrast.com/2012/08/how-to-fix-imessage-syncing-between-iphone-ipad- and-mac/

Dynamic languague selection on Show and Share site

Hi all,
I would like to change wich language is shown on "show and share" website based on web explorer local language preferences. It is documented that language can be fixed by Administrator and later changed by customer but does not say anything about other customizations.
Does any body know if it is possible?
Thanks in advanced!
Alex

Hi Alex,
I'm afraid this is not possible. The language can ony be changed manually.
Regards
Daniel

External file hosting for Show and Share

Hi,
If I only use FTP server (no external streaming server) for external file hosting, can show and share still play the video? Is there any other limitation beside video editing with this scenario?
Thanks.

Hi
1- If your upload your files locally on your SNS , SNS will be the origin server and will be responsible for "RTMP and HTTP". For External hosting files which is highly recommended by Cisco , you have to use external streaming server and Wowza server or Adobe flash server and this will allow all videos .flv , MP4 , WMV,,etc displayed and without streamin server the videos won't be displayed. I hope to take a look for the below :-
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/admin/guide/filehosts.html
Thank you
please rate all useful information

No Thumbnails In Show and Share

I am running Cisco Show and Share 5.3 with a Wowza media server and am able to play videos fine, but the thumbnails are not showing up. I can see the thumbnails in the draft but when I publish the video the thumbnails are not displayed. I don't get any errors when I publish the video.

Normally thumbnails are stored in the default hosting location (*.*). If this points to the Wowza server make sure the virtural directory pointed to in SnS is setup properly. This is created on the Wowza server. This is done by going to Start/Administrative Tools/Internet Information Services (IIS) Manager. Click on the plus sign next to the server name and in front of Sites and right click on Default Web Sites to Add Virtual Directory. Name your virtual directory and use that name in the URL in the default hosting location. When you define the virtual directory point the directory to the file location defind in the default hosting location. You should see the thumbnails in this directory on the Wowza server.
Let me know if you have any questions
John

Show and Share API : Uploading a video to a particular user group

Hi,
I am trying to find a API spec for uplaoading a vide in Show and Share portal for a specific user group. But could not find such thing as usergroup, but just the Content Viewership is available where we need to input all the ____USERNAME____ to upload with access to the users rather than a user group.
I would like to know if anyone can direct me to upload to specific usergroup rather than user.
Thanks in Advnace,
JK

Jeffrey,
What is the content format of the ORIGINAL source comment?
- download MEDIAINFO video analysis program from the web.
http://mediainfo.sourceforge.net/en
- After installed, file->open-> pick your source file with issue.
- change the view to TEXT and copy\paste the results into a
TEXT file and upload here.
From the MXE, highlight the SnS-MXE job and right click and
open the JOB XML. Same thing save the XML code in a text
file and upload here
Sidenote: did you download the DMSprofile.zip file from the web
and install the DMS profiles in the profile directory?
Thanks
T.

Show and Share edit video and previews?

Hi I am trying to add previews to all my published videos all the videos I have so far are .wmv and I realized SnS does not allow me to modify anything. But when I try to modify a video recorded from my webcam (.flv) it does allow modifactions and previws eventhough I can't the watch the published video recorded from webcam.
Do these issues have to do with the fact that I have wmv and also flv files? If so, why I can't do to a wmv what I am allowed to do on a flv?
Thanks!

Hello,
You can only edit .flv or .mp4 files within the Show & Share interface.
The .wmv (windows media) files need to be edited or previewed externally.
Make sure that your streaming server is running for the Show and Share.
You can check this in the SERVICES tab of the Admin Module of the DMM.
The Streaming server must be running to enable the editing feature for the
Flash & mpeg4 files.
I hope this helps!
T.

Show and Share 5.3.10 upgrade image

Similar Messages

Maybe you are looking for