Show and Share and slide synchronization

Now that all Cisco Digital Media Encoders are EoL and EoS, and there is no replacement, what options do I have if I need to do slide synchronization in live events? Slide synchronization it's not supported in non-DME live events.
Cisco will be supporting third-party encoders or a new generation DME devices will be released?
Regards

The DMEs are EoL?  Normally they list that on the main product page: http://www.cisco.com/en/US/products/ps7063/index.html
But I do see the EoL notices when I google it.  Odd.

Similar Messages

  • Show and Share: How to add thumbnail for uploaded by URL

    Hi all,
    I upload video by URL in Show and Share. Can I manually add thumbnail for video? and how to?
    Thank you very much.
    Bintasan Mokkamakkul

    As per docs, the default behavior for show and share is to assign a
    thumbnail based on the length of the video:
    Check out:
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
    TABLE:  Please match the # for each section:
    If your video is ... 
    1. less than 3 seconds long
    2. Between 3 and 8 seconds long
    3. 8 seconds or longer
    It uses this frame for the thumbnail...
    1. 0 seconds
    2. 4 seconds
    3. 8 seconds
    If you have a video that is longer than 8 seconds, but the title shot only lasts for 5 seconds, the automatically generated thumbnail may not contain your video title. Or, if you recorded a message, the system may have captured an unflattering facial expression for the thumbnail. Use this procedure to correct the situation.
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
    The procedure to modify the thumbnail is listed in the link above. You
    need to go to your uploaded videos and click "Edit Video" then follow
    the instructions above to move the slider where you want the thumbnail
    to be.
    Please keep in mind that video editing is only possible for some video
    formats:
    Table 6-1 Video Format Editing Support
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1080725
    I hope this helps!
    Cheers!
    T.

  • I have the apple univeral dock and AV cables and   can play videos and slide shows on my TV but not music How do I play the music

    I am trying to connect an IPOD classic to my TV to play music
    I have the dock and AV cables and can play videos and slide shows but not music

    Actually, i figured part of it out. When I'm playing itunes to my Apple Tv and Airport Express stations around the house, then turn on the mirroring, the itunes volume bar goes all the way to zero. I can bring it back up manually, and it will play on Apple TV, but it won't broadcast to multiple Airport Express speakers, the way it was doing before I turned on mirroring. It seems that mirroring turns off the airport express stations.

  • I would like to create a slide show and then burn to a DVD.  I may be interested in adding music.  Should I use iPhone, iMovie or a simple Powerpoint?

    I am going to be creating a slide show and then burning it to a couple of DVDs.  I have used PPT in the past for simple slide shows for speaking engagements, but I am interested in adding music to this slide show.  What is the best/easiest application to use?  iMovie, iPhoto or Powerpoint?
    Thanks!
    Mike

    burning it to a couple of DVDs
    Is it your intention to create video DVDS that can be played on TV sets via DVD players?  If so you'll need a video DVD authoring application like iDVD.
    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    OT

  • I purchased a hdmi cable to watch movies and slide shows from my mac book pro to my sony bravia tv. i get picture through the tv but no sound. what am i doing wrong?

    I purchased a HDMI cable to watch movies and slide shows from my mac book pro to my Sony Bravia TV. I get picture through the TV but no sound. What am I doing wrong?

    Go to sounds in system pref and select outputs. When the hdmi cable is plug into the tv it will show as an option under output. Just select that option.

  • I can not open i photo. it needs a library that i can use to import photos but i created already books, slide shows and had over 6.000 pictures in the librarybut i can

    i photo does not open. It says i photo needs a photo library but I had more that 6.000 pictures in my library. I created already books and slide shows. it seems everthing is gone.
    I get as reply
    - select a library from list -- but no list
    or
    - find another library
    or
    - create a new one and import photos later
    any chance te recuperate  or  find all I had in i photo

    You can try and recover deleted files from your Mac with an app like File Salvage
    To create a new Library:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'.By default it goes in your Pictures Folder.
    To save book etc that you have created you need to back up your Library.
    Most Simple Back Up
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex:
    Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
    Also, please don't type in block capitals. They are hard to read and on the forum it looks like you'e shouting at everybody.
    Regards
    TD

  • IWeb site loses functionality (Slide Show and Click to Enlarge)

    I have three iWeb sites, to which I have added Slide Show and Click to Enlarge features on Photo pages. They are all published via web.mac.com.
    Two of them lost these abilities after about a week, although the cursor still changes from an arrow to a hand when passing over Start Slideshow and the various pictures. The other site still functions normally.
    Recommendations?

    http://web.mac.com/ralphandsarah/iWeb/HarrisFamily/Home.html
    This first site works fine; Emma's Web Site and Ellen's Web Site do not. (Please see the links.)

  • Uploading YouTube videos/urls into Cisco Show and Share

    We've just purchased the DMM 5.2 and the Show and Share appliance to host internal company videos but there are some YouTube videos out there that we want to pull into our Show and Share system as well. How can we do this? I've tried every possible combination of youtube url and embedded url that is out there, at least nothing that I've tried has worked thus far. I'm able to pull in other internal URLs of different videos (wmv format) without any trouble. Is this an issue with YouTube or perhaps with flv formatted video that YouTube uses (which should work according to the manual).
    I know this is a new product, but is there anyone that can help?
    Thank you in advance,
    Chris

    Chris,
    The YouTube videos are typically Flash content.
    The key here is that you need to download the Flash content
    yourself and then Upload to the Show and Share.
    Use the DIRECT URL of the Flash Content on YouTube to download
    the FLV to you Personal device.  After file successfully download, simply
    upload the file to Show and Share.
    For example:
    Cisco Show and Share Flash Demo
    http://www.youtube.com/watch?v=ZzquCVvS0qQ
    * this link is the actual Dashboard URL not the video link
    http://v4.lscache8.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWRlRRVF9FSkNNNl9MS1hB&fexp=904405%2C901902&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1271466000&key=yt1&signature=1E65C92607546EA03DE0D1082884574D3F58AD0F.93FF9FDB00B10B44BBB52F31AADF3EB50FCEB7CC&factor=1.25&id=673aae095bd2d2a4&
    * Actual URL of Video Content
    ========================================================
    FOR THOSE THAT ARE USING OSX & SAFARI:
    ======================================
    If you need to download FLASH Content for TESTING in your DMS Solution, You
    can download Flash Videos from YouTube.
    Note: The Video Quality is NOT HD or even SD...  it is ID (Internet Definition)
          Also, the downloaded file will be a .flv Flash File.
    1. Open a Video on YouTube, Google Video etc.
    2. Press "Alt+Cmd(Apple-Key)+A" - A window opens named "Activity".
    3. Select the ".flv" file (looking on filesize helps) and press "Cmd(Apple-Key)+C" to copy.
       Paste with "Cmd(Apple-Key)+V" the URL to your Adress Bar and press Enter.
    4. If you need a different video format such as MPEG, WMV, or SWF; you will need to convert
       the downloaded ".flv" file with VisualHub or VLC
    If this answers your question, Please take time to mark this
    discussion answered & rate the response. 
    Thank You!
    T.

  • Can't set File Hosting Locations on Show and Share

    Hi,
         I'm currently using Show and Share 5.2. I have it peered with the DMM and everything for the most part seems to be working fine. The problem that I'm having is that I can't seem to set and save the File Hosting Locations. I set it to store locally and it shows a valid password, but it will not save the setings. I've tried this in multiple browser: the latest firefox and IE. Any ideas?

    Are you using the Actual Appliances or are you testing with VMware images?
    Please gather and upload the following screenshots:
    * Go to the AAI interfaces for BOTH the DMM & the SnS.  Please provide a screen capture
      of the Pairing status screens for each appliance.
    * Go to the DMM --> Admin Module and get a screenshot of the services for the DMM & the SnS.
    Is there any error when trying to save settings?  Please provide the screen shot
    of that..
    Thanks
    T.

  • HT4913 When I go to Settings- Music and slide ITunes Match to Off, it still appears as On under ITunes and App Stores in the Settings menu. Once I turn this off, on returning to the Music menu under Settings, ITunes Match still shows as on. What to do?

    When I go to Settings->Music and slide ITunes Match to Off, it still appears as On under ITunes and App Stores in the Settings menu. Once I turn this off, on returning to the Music menu under Settings, ITunes Match still shows as on. What to do?

    I (though am not sure what happened) solved the problem. Under show all I had both videos and music selected as on. I turned off videos and ..hey presto..the slider reappeared.

  • Uploading Youtube Vid. URL to Cisco Show and Share failed

    Uploading Youtube Vid. URL to Cisco SnS failed. I get error msg. : Connection to video server failed

    Chris,
    The YouTube videos are typically Flash content.
    The key here is that you need to download the Flash content
    yourself and then Upload to the Show and Share.
    Use the DIRECT URL of the Flash Content on YouTube to download
    the FLV to you Personal device.  After file successfully download, simply
    upload the file to Show and Share.
    For example:
    Cisco Show and Share Flash Demo
    http://www.youtube.com/watch?v=ZzquCVvS0qQ
    * this link is the actual Dashboard URL not the video link
    http://v4.lscache8.c.youtube.com/videoplayback?ip=0.0.0.0&sparams=id%2Cexpire%2Cip%2Cipbits%2Citag%2Calgorithm%2Cburst%2Cfactor%2Coc%3AU0dWRlRRVF9FSkNNNl9MS1hB&fexp=904405%2C901902&algorithm=throttle-factor&itag=34&ipbits=0&burst=40&sver=3&expire=1271466000&key=yt1&signature=1E65C92607546EA03DE0D1082884574D3F58AD0F.93FF9FDB00B10B44BBB52F31AADF3EB50FCEB7CC&factor=1.25&id=673aae095bd2d2a4&
    * Actual URL of Video Content
    ========================================================
    FOR THOSE THAT ARE USING OSX & SAFARI:
    ======================================
    If you need to download FLASH Content for TESTING in your DMS Solution, You
    can download Flash Videos from YouTube.
    Note: The Video Quality is NOT HD or even SD...  it is ID (Internet Definition)
          Also, the downloaded file will be a .flv Flash File.
    1. Open a Video on YouTube, Google Video etc.
    2. Press "Alt+Cmd(Apple-Key)+A" - A window opens named "Activity".
    3. Select the ".flv" file (looking on filesize helps) and press "Cmd(Apple-Key)+C" to copy.
       Paste with "Cmd(Apple-Key)+V" the URL to your Adress Bar and press Enter.
    4. If you need a different video format such as MPEG, WMV, or SWF; you will need to convert
       the downloaded ".flv" file with VisualHub or VLC
    If this answers your question, Please take time to mark this
    discussion answered & rate the response. 
    Thank You!
    T.

  • How do I get the student's answers to show on the next slide for drag and drop interaction?

    I'm working with Captivate 7 on a computer running Windows 8.
    I created a simple, one-to-one drag and drop activity using the  Drag and Drop Wizard.
    I want the student's answers to show on the next slide. Specifically, I want the drop source  to show with the drag target that the student connected to the drag source. This way the student can review his/her answers while the program discusses the correct answers.
    Is there anyway to do this?

    * You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden (View > Toolbars > Customize or right-click a toolbar).
    * If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.

  • I am trying to add music to my slide show and I get this error:

    I am trying to add music to my slide show and I get this error:  The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed.  I went to the Adobe site and downloaded a codec program, and restarted but still got the same error.  Any help would be much appreciated.
    Anne

    Thank you - I followed the instructions attached to your response, and I deleted the artwork from the three songs that I want to use, however, when I drag them into Photoshop I am still getting the same error message.  I also don't see an option to convert the song to an MP3.  I tried going to File and Get Info, and there isn't an option.  I also tried right click on the song, but didn't see anything there either...?

  • Show and Share integration with MS SharePoint?

    Does Show and Share have any integration with Microsoft Share Point?  Customer is asking, I don't see anything.

    Dear
    yes of course you can , kindly cheeck the below datasheet and the integration will be through API
    http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_c78-477948.html.
    There is other option i just read about it few days ago  smarthub ASE.
    Thank you
    please rate if this will help

  • I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

    I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

    I would also like to know the answer to this. I am having the exact same problem.

Maybe you are looking for