Show and Share with IE8 and Windows 7 64bit
So we are running 5.2.1, and we create a live event. We have a Windows 7 64bit machine running IE8 in 32-bit mode. Everything appears to start fine, the video plays, we get audio, slides load, the different frames pop up etc etc. However, after a time the video will halt and slide updates will stop. It's almost like it just drops the connection due to inactivity. If the user shuts down the browser completely are goes back to the page it will display fine once more only to stop after so many minutes of playing once again. I've messed around with the flash settings to no avail, and have yet to find anything in IE that could account for this. Maybe I'm overlooking something, anyone have any ideas?
Well now it seems that I have another problem too. Now my iTunes can't find my iPad at all, no error messages or anything.
Now the error message was one of these 4: (0xE8000065)(0xE800000a)(0xE800006b)(0xE8000001)
I can't remember which it was because I can't get any error messages anymore.
By the way, here is a list of what I have done already to make things work.
-uninstalled/reinstalled iTunes 9.1 many, many times in different folders too.
-updated all my drivers
-checked that windows can find my iPad and it does.
-Shut down my F-Secure firewall ect. and trying to connect iPad then.
-I have done everything what you possibly can from this site http://support.apple.com/kb/TS3221
-my USB ports work fine with every other devices like my 500gb harddrive, mouse, keyboard ect. and I have tried to disconnect every other USB devices except iPad and still not working.
I'll try deleting my USB drivers now, reinstall them and even if after doing all that and iPad still not connecting to iTunes.. well then it's our of my league, I don't know anything more to do.
Oh, and by the way. I called to Apple support and they only said that there shouldn't be any problems with Windows 7 and iTunes and they couldn't help me very much.. And my iPad works fine with other computers that are in my house.
Similar Messages
-
I have a script that needs to be modified to create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain. Here is the script, need help at bottom
=======================================================
Set objShell = CreateObject("WScript.Shell")
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
IF Right(objComputer,3) = "000" Then
Else
strShortcut = objShell.SpecialFolders( "Desktop" ) & "\%username% Share.lnk"
strShortcut = objShell.ExpandEnvironmentStrings(strShortcut)
Set objLink = objShell.CreateShortcut( strShortcut )
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
objServer=Left(objComputer,7) & "-000"
objLink.Description = objShell.ExpandEnvironmentStrings("%username% Share")
objLink.TargetPath = objShell.ExpandEnvironmentStrings("\\" & objServer & "\Users\%username%\Desktop\%username% Share")
objLink.Save
End If
=======================================================
if "C:\Users\%username%\desktop\%username% Share" exits do nothing
if not create the folder and share it with everyone read only
======================================================
The section directly above is what I need to add, anyone have a clue how to make this work?Bill: Can you suggest a site? I am in the weeds here trying to get this done yesterday. I have been reading code and trying to figure this out since yesterday morning. I have to roll out this image to 2 dozen machines and
this is holding us back. Any idea which site I can post to for help?
The bigger issue is that you have been given the answer to this in many different forms and, because you have no technical background, you fail to see what is being shown to you. That is why I have repeatedly suggested that you hire a consultant.
The link to the learning material is at the top o this page. You can also search the web for Windows consultants.
In the learning link you can also look up how to manage files. If, in the beginning you had chosen to use the learning materials you might not be in this bind.
Look up and research the FileSystemObject.
¯\_(ツ)_/¯ -
Share Cinema Display and peripherals with MBP and PC
Share Cinema Display and peripherals with MBP and PC
I am about to be forced to use a business network connected PC in my office, but I will continue to bring my personal MacBook Pro to work for my personal e-mail, calendar, internet, etc. (it will be connected to a seperate open DSL network). I am thinking about getting an Apple Cinema display and trying to use this one display for both computers. I would like a way to "switch back and forth" between the two systems, all the while using the same mouse, keyboard, printer and Cinema display.
Does anyone have any experience setting up what I am wanting to do?
Also, how does connecting an external display effect a MBP? Can you close the screen on the MBP, turning off the MBP's display but keeping the computer running? I'd like to be able to tuck the MBP out of the way to save deskspace but still be using it via the Cinema display and peripherals...
Thanks so much!You can use synergy (link: http://synergy2.sourceforge.net/) to link the mouse and keyboard across the two platforms.
If you want to use only one display, you'll need a KVM switch.
You can run the MBP either with it's own screen open, or shut it and use only the external screen.
Hopefully this helps a little... -
New fingerprint software is not working with IE8 and FF3
I have downloaded the latest version but it still does not resolve the issues with IE8 and FF3...
Please, Please...
Fix the main issue of the software unable to save website login details with Internet Explorer 8+ and Firefox 3+
Thanks
Stewart GraingerHello
I am pretty sure they know about this issue and software companies must not hear what the people say. For me it is logic that they watch what happen on the software market and try to adapt own products as soon as possible.
This issue with IE8 is known and soon or later the updated version will be offered on download page but the question is: when?
I cannot understand why they wait so long time. OK, to fix some issue and testing procedure can take a days but IE8 is not on the market from yesterday.
Lets see how long it will be necessary for AuthenTec to fix this issue. -
Itunes show duplicate, 1 with icloud and 1 without. are they both on hard drive?
itunes shows duplicates - 2 with icloud and 1 without.
are they both on hard drive?
which ones should i delete?iTunes Store: Transferring purchases from your iOS device or iPod to a computer
The should then show in your iTunes library. They are not anywhere else. -
Should my wife and I use the same apple id and icloud account? We have seperate iphones and share an ipad and our itunes are on 1 pc desktop??
2 iphones, 1 ipad, 1 PC with 1 apple account
-
I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. I did not have this issue in the older version. I use an iMAC running OS10.6.8. How do I resolve this issue?
Starting with this, you have errors in your CSS code.
body {
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 0px;
color: 151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: EFF5F8;
body {
margin:0;
color: #151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: #EFF5F8;
font-size: 100%;
Related links:
Windows Chrome, why do my fonts look so bad? - Lee Green
css3 - Bad font rendering Chrome - Stack Overflow
Nancy O. -
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want. -
Hi,
I would like to copy my photos (from iphoto) and movies (from i movie) from my Mac book air to my imac in which I also have iphoto and imovie with photos and movies.
My goal is to have a unique source of photos and movies in my imac.
Thanks !
NicolasAs to iPhoto
Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
For iMovie support please post in the iMovie forum
LN -
Flash Player Does Not Work with IE8 and Windows XP
I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?
Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
1) Update your Windows software
a. Follow the steps below to view updates that are available for your computer.
i. Click to go online to the Windows Update website
1. Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
ii. Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
1. High Priority
2. Software, Optional
3. Hardware, Optional
iii. Select the updates you want, click Review and install updates, and then click Install Updates.
b. What do I do if Microsoft Update is not installed?
i. Follow the steps below to install Microsoft Update and check for updates.
1. Click to go online to the Windows Update website
2. Click the Go button next to the Get Microsoft Update Today and then click Start Now.
3. Review the license agreement, and then click Continue.
4. After setup is complete, click Check for Updates.
5. Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
a. High Priority
b. Software, Optional
c. Hardware, Optional
6. Select the updates you want, click Review and install updates, and then click Install Updates.
2) Turn off Internet Explorer add-ons you don't recognize
a. When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
b. How do I spot malicious add-ons?
i. You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
1. Blank names.
2. Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
3. A publisher name you might not recognize.
c. How do I disable an add-on?
i. Open Internet Explorer.
ii. Depending on your version of Internet Explorer, do one of the following:
1. In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
2. In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
3. In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
4. Follow these steps to determine the version of Internet Explorer you're using:
a. Open Internet Explorer.
b. Press ALT+H, and then click About Internet Explorer.
c. How can I find which version of Internet Explorer I'm using if it won't launch?
i. If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
1. Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
2. Right-click iexplore, click Properties, and then click Version.
3. Under Item name, click File Version. The version number appears under Value to the right of File Version.
a. Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
d. If you aren't using the latest version of Internet Explorer, consider updating.
i. How do I update to the latest version of Internet Explorer?
1. Click to download and install the latest version of Internet Explorer
ii. How can I update Internet Explorer without launching my web browser?
1. Click to go online to the Windows Update website.
2. Click Custom to check for available updates.
3. In the left pane, under Select by Type, click Software, Optional.
4. Select the Internet Explorer update, and then click Review and install updates.
iii. Click the name of the add-on.
1. Click Disable. You might have to restart Internet Explorer for the changes to take effect.
2. Why do some add-ons include (Not verified) in the Publisher column?
a. If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
3. How do I disable an add-on if I can't access Internet Explorer?
a. Click Start, and then click Control Panel.
b. Double-click Internet Options.
c. Click the Programs tab, and then click Manage Add-ons.
d. Click the name of the add-on you want to disable, and then select Disable.
e. When the Add-on Status dialog box appears, click OK to close it.
3) Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
a. Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
i. http://go.microsoft.com/fwlink/?linkid=56726
If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
1) Disable all add-ons (one at a time) until you can no longer reproduce the problem
a. Close all Internet Explorer windows.
b. Click Start, and then click Control Panel.
c. Click Network and Internet Connections, and then click Internet Options.
d. Click the Programs tab, and then click Manage Add-ons.
e. Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
f. Click OK.
g. Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
h. Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site. -
This is file I created in SnapzPro (which was saved as a Quicktime mov - Animation) of a Powerpoint Presentation.
Jon, how do I re-compress the Snapz data for dvd playback?
That depends on your specific work flow strategy. I normally perform the processing in two stages if editing is involved or in a single stage if I don't plan to trim, title, add a narration track, add special effects, and/or add filters to the Snapz Pro X captured screen data.
In the two-stage process you export the captured data to an intermediate low-compression, high-quality fomat. (This can be the default settings for Snaps Pro X or a more modern editing specific format like ProRes 422/Linear PCM depending on the codec components for which your system is configured and your personal editing preferences.) The Snapz Pro X intermediate file is then edited in the application of your choice and the results are re-compressed to your final target compression format.
In any case, whether you are re-compressing the data using QT 7 Pro, iMovie, GarageBand, MPEG Streamclip, Snapz Pro X, or similar third-party app that accesses the built-in OS X QT routines, the export process is essentially the same. Whether you use a "Movie to MPEG-4" or "Movie to QT Movie" export, you must export to a data rate limited, multi-pass H.264/AAC compression combination to take advantage of the "Optimize of CD/DVD" option. Specific data rate limits depend on the playback dimensions of the file you are creating, the minimum level of quality you will accept, and the playback speed of the hardware to be used. (I normally target 4X-8X settings for SD content but if you know the recipient has a higher rated optical drive and your content is HD, then you can use higher encode settings for improved quality.)
I captured the slideshow again in Snapz, and saved it as H264/AAC. Is this good enough?
If you did not specifically use the "Optimize for..." feature, then the file is automatically targeted for "Computer" playback which assumes playback is from an hard drive which has greater bandwidth/faster throughput than an optical media player. If the target display dimensions are resonably small, the the contextual nature of the H.264 video encoder may or may not be within the playback limitations of an optical drive usually depending on the encode matrix dimensions, graphic complexity of the source data, overall brightness of the scenes, and limitations you may have place on the target file—i.e., the larger the encoding dimensions, the faster the data date and the less likely the file will be compatible with optical drive playback without having to constantly interrupt playback to cache/rebuffer additional data. However, you can always tell the recipient that if this happens, he or she should simply copy the movie file from the CD/DVD to their hard drive for playback.
What now? Do I open it in Quicktime and use the "share for mac and pc", then right-click on it in the finder and "burn to disc?"
What you do next depends on how you plan to burn the file. The steps explained above allows you to create a file that is compatible with playback from an optical drive in a QT Player app but is not authored for playback from a commercial DVD Player. Your next step is to burn that file to an optical disc that can be read by your recipient's computer. I my case, I normally burn the disc using a hybrid (HFS Plus/ISO 9660) format which supports HFS Plus, ISO-9660, Rock Ridge, and Joliet with Rock Ridge file systems. How you do this is up to you. You can, for instance, use a third-party app like Toast or Dragon Burn to create a data disc; create/burn an image file with your Disk Utility app (this is a good option if you plan to burn several discs now and/or in the future); create a named "Burn" folder, drop the file to it, and press the burn button; or simply insert a blank optical media disc into you optical drive, change the default disc name to whatever you want, drop your file to the blank media's Finder window, and press the "Burn" button. (NOTE: Burn options may differ depending on the software installed on your system and/or the version of OS X under which you may be operating.)
Dont see any specs re playback from an optical disc drive? The slideshow is only 3 min long, and I want to avoid turning it into a video DVD using iDVD, iMovie etc, as the quality of the pictures and type degrades badly. Thanks for the help. Been struggling with this for weeks.
As noted above, this is an encode setting that only becomes active when you are targeting your H.264/AAC encode for multi-pass/data rate limited compression. When active, the "Optimize for..." pop-up allows you to select "computer" (targets playback from a hard drive), "CD/DVD" (targets playback from optical media), or "Streaming" (targets playback from a realtime streaming server) options. This option prevents data rate excursions from exceeding limits normally associated with each of the named types of playback. This option has nothing to do with the file system used to burn the media disc which determines which platforms/OS can read the disc and the file it contains. -
How can I add a new calendar to my Mac and share it with my wife's Mac. I execute the normal process and she receives the email and accepts sharing but the new calendar doesn't show up on her mac or iPhone.
Hi,
I would point out that I did say...
Of course the Contacts List has to have people listed in it.
The Error seems to be that you have not even got an My Card.
The OS when the computer is brand new and you set up the first Admin Account should create at least once Card entry for the Address Book/Contacts which has the Head and Shoulders icon (the My Card)
The does presume the the first account on the Mac doers have a person's First name and Last name to work with.
Of course not everyone sets things up this way.
Anyhow
To Check the Contacts List open the app.
Go to the Preferences.
Go to the Accounts section.
This should list at least two "accounts
One is for Syncing with iCloud and the other is for storing the Info on the Mac itself
In System Preferences > iCloud you can only set up one Apple ID to be the iCloud ID.
If you do or have changed this you may have extra accounts in the Contacts > Preferences > Accounts
Uploaded with Skitch!
7:36 PM Thursday; September 6, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Show and Share edit video and previews?
Hi I am trying to add previews to all my published videos all the videos I have so far are .wmv and I realized SnS does not allow me to modify anything. But when I try to modify a video recorded from my webcam (.flv) it does allow modifactions and previws eventhough I can't the watch the published video recorded from webcam.
Do these issues have to do with the fact that I have wmv and also flv files? If so, why I can't do to a wmv what I am allowed to do on a flv?
Thanks!Hello,
You can only edit .flv or .mp4 files within the Show & Share interface.
The .wmv (windows media) files need to be edited or previewed externally.
Make sure that your streaming server is running for the Show and Share.
You can check this in the SERVICES tab of the Admin Module of the DMM.
The Streaming server must be running to enable the editing feature for the
Flash & mpeg4 files.
I hope this helps!
T. -
Hello,
I'm very frustrated. I need to delete photos from my iphone to increase the storage so I can update the operating system. Since first using the phone I bought extra iCloud storage and ensured the photo streaming button for the iCloud was turned on.
Unfortunately it seems to have a mind of its own and will download and share some photos but the majority have not been downloaded.
I've resorted to manually putting them on photo stream (the one you share with friends) so the photos will be on my iPad. It also takes ages for my iphone to put them on the photo stream. It's downloaded one album x3 ..??!!? I've tried deleting the duplicated photos but it's now frozen on me....
I haven't dared delete the photos from my camera roll in case I loose them all and I'm therefore stuck in the situation of being unable to download the new operating system or take anymore photos/download music/apps. It *****!
Please Help!
Are there any other options for me to be able to download my photos when I don't have a computer/laptop? Is there a permanent online storage option I can use?
Thanks
BeckyAmazing steps you've done so far! The great news is this is very unlikely an issue with your iPhone.
I've run into a similar issue lately as well. I narrowed it down to one song that was causing 30 songs not to sync. I removed the song from the sync list (unchecked it) and all 29 songs were able to sync.
You may be running into a similar issue. This may be a problem with this version of iTunes, an issue with one song or a group of songs; hard to know for sure. It's important to narrow down and isolate the cause. Most imporantly get that music back on there!
The way to narrow down the casue add just a few songs at a time (even 1, just to get that first sync finished). Manually syncing is what you'll need here.
Plug in your iPhone, on the Summary screen (shows a picture of your iPhone, the iOS version, Restore iPhone....; etc). Under the Options area at the bottom choose to Manually Manage Videos and Music then choose Apply in the lower right. The music that's on your iPhone now should be removed from your iPhone now. You're now able to sync music manually.
The link below explains how to drag the songs from the iTunes library on the computer on to your iPhone which will start the sync. Add just one song just to see if you can get 1 of those hundreds of songs on there. If you can, awesome! Keep adding until you find the song or group of songs that are causing this issue.
http://support.apple.com/kb/HT1535
Please let me know how things are going.
Cheers! -
Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MVWhat is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD
Maybe you are looking for
-
Problem with iOS 4.3 Home Sharing with multiple iTunes libraries
I posted this in another thread, but because there seemed to be a number of issues going on there, I decided to start another thread to see if anyone else is having this problem. I have a Mac Mini and a Mac Pro on my network. My iPad can see the iTun
-
My iTunes will no longer update on my iPod. I hear the connection.
HP Compaq Windows XP Pro service pack 2I connect my iPod and it will not update, I can hear the sound to verify the connection, but it will not update. I've updated everything. what else could it be?
-
Help with adobe shotoshop elements 10
can I remove photo shop 3 using windows add and remove after transfering photos to elements 10. Will I lose any of these photos in elements 10?
-
IPhoto slideshow photo quality?
I am working on a slideshow and it appears that the photos are losing resolution in the slideshow...how can I keep the clarity and sharpness in the photos?
-
Make data selections obligatory in report painter
Hi, Is it possible to make the selection parameters obligatory in report painter? If so, can anyone explain me how? Thanks!