Show before and after in primary in room in color

I am using Color in FCP7
Can anyone tell me how to show how an was BEFORE it was colour corrected in the Primary In room in Color?
i.e I want to see the before and after view, in the Primary In room
Can you inform me how to do this please
It's easy in fcp7 just untick a box....

CMD-G toggles between corrected and uncorrected.

Similar Messages

Any existing program to list before and after BDC error?

Looking for a way to report any BDC errors and show before and after its been corrected.

Hi,
Before making correction:-->
!. If you are using call transaction , then you can all errors in BDCMSGCOLL internal table
and use fm MESSAGE_PREPARE to generate message texts
2. If you are using session method then you have error log SM35.
After making coorection i don't think you have anyway to capture corrected errors
a®

How to make an before and after effects?

So, I want to make a video that show the audience this is before and after the edit. And i want to make it look like this YouTube Rewind 2014: Behind the Scenes - YouTube
How to make it?
Thanks:)

Really? You take footage of you shooting the video with another camera then you edit it together with shots of the finished project. If you want to show before and after shots of an effect you just put the original footage on top and animate a mask or opacity to reveal the rendered effect below.
If you can't figure out how to make a before and after then you will have a very difficult time doing any effects using AE because there is absolutely nothing in this before and after but very basic editing and masking.

How do I add a before and after transition to a standalone clip in the second or other than primary stack?

New to FCPX on a project this weekend. I have gotten reasonably comfortable with the basic features but one thing that I CANNOT figure out, is how (what used to be) selecting a track in the timeline to activate it to apply a transition. I need to select a video clip which stands alone in the stack which is positioned above the primary track and add a blend transition before and after the clip. I have set the opacity to blend with the images in the primary track below but the beginning and end of the clip in the second stack do not fall at the transition points in the lower track which should not matter anyway. I can’t find it in Help or the third party tutorials that I purchased and completed. Thanks for your help!

Tom gave you the answer. As a follow-on you can then use the Cross Dissolve transition on your newly converted connected clip. This transition will allow it to dissolve smoothly into the video below it. Note that the Fade to Black transition will take both that clip and the video below it to black which would probably be undesirable. Use Cross Dissolve instead. Best wishes.
stephen

Report showing costs on cost Centers before and after Cost Distribution

Hi experts,
Is there a report that shows the costs on a Sender / receiver Cost center/Cost elements before and after the distribution cycle is run. What I am looking for a report that shows the costs on Cost center/Cost Element before the cost allocation cycle is run, the allocated costs in different columns.
I would appreciate if some one could let me know the tables to fetch the values for the same ( values before allocation, allocated vlues for the month)
Thanks,
Vijayanth

Hi
S_ALR_87013611... there are many such reports.. U cud have browsed the easy access menu very easily
Regards
Ajay M

Xl reporter shows different result before and after Period-End Closing.

Hi SAP experts,
We have an issue with XL Reporter. When we ran Period-End closing and ran XL - PL Period & YTD (with the same parameters), XLR shows nil in the Actual YTD column and the monthly figures are out by a big difference (example pre-rollover it was $110K after rollover it shows negative $12M).
This happens on 2 different clients running 2 different SAP B1 (2007A PL 42 and 8.8 PL 13) on the same XL Reporter which is possibly the default XL report that comes with the installation.
I don't have any idea why the XLR is running 2 different figures altogether when running the same XLR using the same parameter before and after rolling the year over. The default SAP B1 P&L report stays the same before and after the rollover, I would have expect that the same would happen with the XLR.
Please advise.
Regards,
Didy Arfiono

Hi Julie,
Thanks for the reply. I'm not entirely sure what you mean by excluding a certain transaction for closing entries as this would defeat the whole purpose of PEC which as you stated was to transfer P&L balances to retained earnings account to be carried forward.
I've check at some guides including one from Orchestra Team (http://www.youtube.com/watch?v=e4tUo774eXg) and so far the process that I've done is exactly what it is.
Regards,
Didy

How Can I Blink Between Before and After in Liquify?

I think I've done this before (in prior versions), but I'm drawing a blank... Is there a quick way to blink between before and after results in Liquify?
Thanks.
-Noel

There are several ways i can think of
1. Alt click on the cancel button and the Ctrl+Z
2. Hit the Restore All button then Crtl+Z
3. If you have the advanced options showing you could use Show Backdrop and then toggle the Show Image

Possible to get JComboBox before and after chaged value?

Hi,
I have a JComboBox... whenever the JComboBox value change is it possible to get the before and after changed value? For example:
Let says the JComboBox is showing "One" and the user change it to "Three" after the user chged... I want to System.out.println before chged value ("One") and aft chged value ("Three")
I tried:
put in some code in the itemStateChanged() method... but no success...
Can someone pls provide some pointer or sample code...
Thank you for your time...

Ok, I lost half a day on this (novice problem), but I arranjed a solution that resolve the problem totally. There is the code:
YourComboBox.addFocusListener(new java.awt.event.FocusAdapter()
        int aux_selected;
        // if YourComboBox gains Focus
       public void focusGained(java.awt.event.FocusEvent fe)
            // get index value of selected element
           aux_selected= YourComboBox.getSelectedIndex();
           // create a variable for storing de ItemListener
          ComboBListener = new java.awt.event.ItemListener() {
               public void itemStateChanged(java.awt.event.ItemEvent e)
                   if(e.getStateChange()==java.awt.event.ItemEvent.SELECTED)
                       // compares the selected value with the old one
                       if (aux_selected!=YourComboBox.getSelectedIndex())
                       System.out.println("ComboBox Changed !");
           // add the variable Listener to your Combo
           YourComboBox.addItemListener(ComboBListener);
       // if focus is lost
       public void focusLost(java.awt.event.FocusEvent fe)
          // remove the itemListener from the combobox
         YourComboBox.removeItemListener(ComboBListener);
//Put the Listener variable outside
private java.awt.event.ItemListener ComboBListener; //----------------------------------------------------------------------------------------------------
You only have to change YourComboBox by the name of the combobox.
To all people that help this forum (specially from PORTUGAL) and all java people: YOU ARE DOING A GREAT JOB

Elements 9 - Before and After Picture View?

I like working on photos when I can see the original picture on the left and the picture I'm editing on the right so I can 'see where I'm going' with my changes.
I'm currently trying out Elements 9.
When I work with the 'Guided' or 'Quick' Editing sections (right side) I have a drop down box that gives me the following options after the word View on the left side: 'Before Only', 'After Only', 'Before and After Horizonal', and 'Before and After Vertical'.
But when I go to the 'Full Edit' mode that drop down box disappears.
How do I get a Before and After Photo to show on the screen when I'm in 'Full Edit Mode'?
Thank you for your help.
TripleB

Simply use a duplicate layer or adjustment layer before starting your edits and then you can click the eye icon in the layers pallet.
You can click on and off to see before and after as you do more editing.

Issue with Lightroom CC 2015's before and after (\) - Windows 7

Okay, I downloaded Lr CC 2015 and everything is working great except for one thing - before and after. I edit an image then move to another (settings synced but needs a few refinements). I finish the edit and hit \ to take a look at where it started. When I do so, Lr decides to go back to the previous image, thinks about it, then shows me the before of the correct image. After the first time pressing \ it doesn't happen again, unless you move to another image. A little irritating, but something I can put up with. Is anyone having the same issue? Everything is up to date; graphics, OS, etc. Also worth noting, this does not happen with Lr 5.7.
Any ideas, or should I post a bug report over on feedback.photoshop.com?
Thank you,
Benjamin

Issue with Lightroom CC 2015 - Before and After (\)

Split view for before and after changes?

One feature I used to use a lot on Lightroom as where it would show a split view showing the image before and after changes (adjustments). I cannot find how to do this in Aperture - is it possible, what is this feature called?
(and before any smart person tells me to look in help, I'm tired of responses like that. I've looked and didn't find, and that's why I'm asking here. I've tried Compare, and Before and After Changes etc.)

Unfortunately, no, there is no ability to do the split view like Lightroom has. It's a nice feature.
The closest you can do is to flip back and forth between two versions. Because when you view the master in aperture it shows the original file without crops and straightening, I suggest that once you crop and straighten, you then create a new version and work on that (this is as close as you can get to LR's "snapshot" functionality). You can then flip back and forth between the two versions to see the changes... but you can't see them side by side with a split.

Before and After View

When I'm in my Develop module and I look at some of my edited photos my before and after view is not showing. Sometime I see the original for a second then it resorts to the edited. Now this is happening to some of my collection cause in some collection they are working just fine. Can some explain to me what is happing.
thanks

That's not it. I'm not sure what your talking about or we are talking about two different things. All the files in the collection are before and after are the same this is evident on some other folder in the collection.
I think I figure out the problem
Go to the History located on the left side of your canvas, above the Copy and Paste buttons. You should see Preset, Snapshot, History and Collection. They should have a + beside to expand. Go to History (this is a list of all you edits you made on the image) Go to the bottom where it says import of the file. This is the start point of your file.
Right mouse click on the import xxxx xxxx file ( or how ever you saved your file name). Highlight "Copy History Step Settings to Before."
There you go your good to go
I don't know how to do this on all the images with this problem in the folder all at once. I just do it individually.

Theme looking different before and after previewing an advanced style

Hello,
i have a problem with a theme looking different before and after previewing an advanced style in mapbuilder Ver11_1_1_5_B110527
My style xml looks like this:
<?xml version="1.0" ?>
<AdvancedStyle>
    <CollectionStyle>
      <style name="color_style" shape="polygon"/>
      <style name="line_style"/>
</CollectionStyle>
</AdvancedStyle>It is a combination of a color style and a line style styles:
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
    <desc/>
    <g class="color" style="fill:#B6D1CA">
        <rect width="50" height="50"/>
</g>
</svg>
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
<desc/>
<g class="line" style="fill:#969696;stroke-width:2;stroke-linecap:BUTT">
    <line class="base"/>
</g>
</svg>The styles and theme are created using insert statements, and not the mapbuilder.
When i take a look at the theme preview in mapbuilder, it will look like this: http://dl.dropbox.com/u/22117905/before_preview.PNG
Now i open up the advanced style and hit the preview button.
If i take another look at the theme preview, it will now look like this (and this is the desired output btw.): http://dl.dropbox.com/u/22117905/after_preview.PNG
Now my question is, why does the same theme look different, after previewing the advanced style?
I tried clearing the cached geometries and metadata cache of mapviewer, but that didn't help.
Apart from previewing every style, what can i do to make sure that the themes are styled correctly?
Thanks for help in advance,
Dirk

Hello Joao,
i just found the error. It is in my pl/sql package where i create the styles.
Mapbuilder showed the staly as in my first post, but that i created looks like this
<?xml version="1.0" ?>
<AdvancedStyle>
    <CollectionStyle>
      <style name="color_style" shape="polygon"/>
      <style name="line_style" shape="all"/>
</CollectionStyle>
</AdvancedStyle>Notice the "shape=all" attribute in line_style. Apperently Mapbuilder doesn't like it, if i set this in the style. After previewing or saving the style in mapbuilder, the sttribute is removed and the style is correct.
I now edited my package and rerun it, and now the themes are displayed correctly.
Regards,
Dirk

PSC 1210 page feed before and after printing

My PSC 1210 has been working fine for years but it has just recently started feeding a blank page before and after printing. That wouldn't be a problem except that the blank pages are not fully ejected, this means that I have to grab the first blank page, as it comes through the printer, and pull it out, otherwise it gets drawn back in causing a paper jam when the actual print job starts. Once this blank page has been removed the print job continues perfectly.
This occurs when printing documents, copying using the scanner, and printing a test page.
I have removed and reinstalled the printer driver/software and performed a partial reset on the printer, neither fixed the problem.

I see you mention that the issue also happens when you are copying, that means that this issue is not related to your printer software. So that's good to know!
Now, since this is not a software issue, this must then be related to your hardware. Is this printer plugged into a wall outlet directly or is it plugged into a surge protector? To be sure that the printer gets all the power it needs make sure that it is plugged directly into a wall outlet.
First things first, I would recommend unplugging the printer for about 30 seconds from both the back of the unit and from the wall outlet, and then plugging it back in. Try making a copy or print and see if the issue persists.
You can also try cleaning the paper feed rollers in the printer, here is a document that can show you where all of those are located and how to clean them.
http://goo.gl/glh8v
Let me know if any of this helps resolve the issue!

Comparing pictures before and after adjustments

Dear all,
I'm about to switch from the Canon software DPP to Camera RAW.
In DPP it's possible to split the view in order to compare the same RAW picture with different adjustements. This possibility is very valuable to me.
Is it possible to split the view in Camera RAW ?
If not, how do you manage to compare the original picture to the one you obtain after having made your adjustments ?
Thank you for your answers,
Cédric

Each adjusment panel in ACR has a Preview box you can check or uncheck to view the adjustments you have made in that panel.
Alternatively, you can simply toggle the "p" key to see the difference in your image before and after the adjustments. But in either case, this before/after comparison is limired to the adjustments made only in the panel you are currently working in.
However, if you switch to the Presets panel and toggle the "p" key, this will show you the difference between the image as it was initially opened in ACR and after all adjustments made in all panels.

Show before and after in primary in room in color

Similar Messages

Maybe you are looking for