Show call history voice brief - time display

Hello All,
Show call history voice brief showing time in milli seconds. Show logs displaying the exact time format. Below commands are already added in the gateway.
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
GW: 2821
Version : 12.4(15) T14
-Murali

yes, the range is from 1 to 100

Similar Messages

  • Show call history voice brief output

    The output as below;
    tok-fr-rtr>sh call hist voice brief
    <ID>: <start>hs.<index> +<connect> +<disc> pid:<peer_id> <direction> <addr>
    dur hh:mm:ss tx:<packets>/<bytes> rx:<packets>/<bytes> <disc-cause>(<text>)
    IP <ip>:<udp> rtt:<time>ms pl:<play>/<gap>ms lost:<lost>/<early>/<late>
    delay:<last>/<min>/<max>ms <codec>
    MODEMPASS <method> buf:<fills>/<drains> loss <overall%> <multipkt>/<corrected>
    last <buf event time>s dur:<Min>/<Max>s
    FR <protocol> [int dlci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>
    <codec> (payload size)
    ATM <protocol> [int vpi/vci cid] vad:<y/n> dtmf:<y/n> seq:<y/n>
    <codec> (payload size)
    Telephony <int> (callID) [channel_id] tx:<tot>/<voice>/<fax>ms <codec> noise:<lvl>dBm acom:<lvl>dBm
    MODEMRELAY info:<rcvd>/<sent>/<resent> xid:<rcvd>/<sent> total:<rcvd>/<sent>/<drops> disc:<cause code>
    speeds(bps): local <rx>/<tx> remote <rx>/<tx>
    Proxy <ip>:<audio udp>,<video udp>,<tcp0>,<tcp1>,<tcp2>,<tcp3> endpt: <type>/<manf>
    bw: <req>/<act> codec: <audio>/<video>
    tx: <audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120 pkts>/<t120 bytes>
    rx: <audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120 pkts>/<t120 bytes>
    Telephony call-legs: 105
    SIP call-legs: 0
    H323 call-legs: 105
    MGCP call-legs: 0
    Total call-legs: 210
    28CD : 232788573hs.5992 +162 +24465 pid:8712 Originate 8717898
    dur 00:04:03 tx:11998/239960 rx:12151/243020 10 (normal call clearing (16))
    IP 192.168.139.36:17424 rtt:247ms pl:237520/220ms lost:0/22/0 delay:50/50/70ms g729r8
    28CD : 232788264hs.5993 +471 +24748 pid:46201 Answer
    dur 00:04:02 tx:12139/242780 rx:11998/239960 10 (normal call clearing (16))
    Telephony 3/0:0 (6048) [3/0.2] tx:235590/235590/0ms g729r8 noise:-82dBm acom:32dBm
    1E6B : 232806587hs.5994 +417 +21065 pid:1 Answer
    dur 00:03:26 tx:10447/208940 rx:10314/206280 10 (normal call clearing (16))
    IP 192.168.139.104:19276 rtt:342ms pl:204470/10ms lost:0/0/0 delay:60/50/70ms g729r8
    1E6B : 232806588hs.5995 +416 +21030 pid:46201 Originate 4622916
    dur 00:03:26 tx:10297/205940 rx:10447/208940 10 (normal call clearing (16))
    Telephony 3/0:0 (6051) [3/0.3] tx:207560/207560/0ms g729r8 noise:-82dBm acom:41dBm
    Can someone tell me what does the value for pl:<play>/<gap>ms is refering to?
    cheers!
    csyeo

    anitachoi3,
    You can use the below command to clear a voice call. Please exercise caution to ensure that this is not an on-going valid conversation.
    look at the output of 'show call active voice brief' and grab the ID. Let's say you want to clear the call with the ID 7D4 in your example. Execute the below CLI:
    clear call voice causecode 16 id 7D4
    Execute 'show call active voice brief' to see if the call is cleared.

  • Show call active voice brief showing old calls

    Hi There,
    I have noticed when running a 'show call active voice brief ' that at the top there are calls from over 5months ago in the logs. I thought that this command only shows active calls, so am a little confused as now I am not sure I can trust that calls are active..
    Anyone have any ideas, or any way of clearing the counters for this command, a 'clear counters' doesnt clear them.
    Thanks                

    Hi Guys,
    Tried clearing the counters as per Nadeem's post - still no go.
    Heres the sh ver below, Thanks Sambit ill look into that caveat
    g1#sh ver
    Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Thu 20-Jun-13 13:30 by prod_rel_team
    ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
    au-nsw-pem-adm-g1 uptime is 18 weeks, 17 hours, 19 minutes
    System returned to ROM by INVALID Switchover at 16:13:51 AEST Wed Aug 14 2013
    System restarted at 16:15:58 AEST Wed Aug 14 2013
    System image file is "flash0:c2951-universalk9-mz.SPA.152-4.M4.bin"
    Last reload type: Normal Reload
    Last reload reason: Reload Command
    Cisco CISCO2951/K9 (revision 1.1) with 1007616K/40960K bytes of memory.
    Processor board ID FGL1651127R
    3 Gigabit Ethernet interfaces
    1 terminal line
    DRAM configuration is 72 bits wide with parity enabled.
    255K bytes of non-volatile configuration memory.
    500472K bytes of ATA System CompactFlash 0 (Read/Write)
    Configuration register is 0x2102

  • Show call history voice

    How many numbers of voice call history can be displayed once? Range is from 1 to 100. Thus assume IOS can keep up to 100 voice calls history.
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123tcr/123tvr/vrht_s04.htm#wp1221703
    Thank you in advance.

    yes, the range is from 1 to 100

  • In iOS 7.0.2 All and Missed tabs are not showing call history correctly

    In iOS 7.0.2 All and Missed tabs are not showing call history correctly, I have iPhone 4 running iOS 7.0.2 version it looks like there is a bug. Missed call history and All calls (incoming, outgoing and missed) history is not showing properly in a list. Ideally when I click on missed it should show me recent missed call list and when I click on All it should show me (incoming, outgoing and missed) calls list sorted by current date and time.
    I would like to request Apple developer team to look into this and fix this bug asap. Thanks in advance.

    Hello gnutellabrot
    Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Is the call history (dates and times) accurate on the iPhone?

    Trying to determine if the call history on an iPhone is accurate.

    Tried that but like blackberry Os 6 provides that within the phone itself.
    My carrier has not given any option for the same.
    What BB has is that you just chose any contact in the contact list and below the contact information, all calls+messages+mails whether sent or recieved are listed for last 15-30 days.
    What is does is help you remember what kind of conversation you have had with anybody and the frequency as well.

  • Agent detail report shows calls outside the time range

    Hi all,
    I have an UCCX 7.0 SR5 call center. My problem is that the agent detail report is showing calls outside the defined time range on the historical reporting client.
    Those calls start slightly after the end time difined in the HR client.
    Is there any explanation for this behaviour?
    Best Regards,

    Hello Hatem,
    I think that might be expected. In the Agent Detail Report the call start time is the time the call rang at the agent's extension and not necessarily the actual time the call started. So the report will show the call was really received within the time range but it rang the agent slightly after that time.
    HTH
    Pablo

  • Calls history: White page on the dialer...

    Hi to everybody, 
    I've bought yesterday the new Xperia Z1C; wonderful, but I've a problem: I'm not able to find the calls history.
    pressing Phone -> Dialer Tab -> Option "Show calls history", the situation is the same: White page on the dialer...
    The strange thing is that if I use the standard widget of "Calls History", I see all my calls done.
    What can I do to resolve it?
    Thanks and ciao!
    Emanuele

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    If the call log is set to 'show call log' and it still appears empty I suggest that you first of all try to turn off your phone by press and hold the power button and volume up at the same time until the phone vibrates. 
    If the call log still appears empty I suggest that you clear data for phone under settings > apps > all > phone > clear data. Restart your phone and try again. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • How to copy show call active data to syslog or any ftp server

    i need all the info in show call active voice command in AS5400 to syslog server or any other way to store in my SQL server

    "Logging host" is the command used to transmit the logged messages to a syslog server host. For this, first enable logging using "logging on" command. Then, type "show call active " command. the output will be transferred to syslog server.

  • I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up.

    I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up. Does anyone have the same issue and how do I fix it?

    dam122577 wrote:
    but wont restoring as new delete all my info on my phone
    Yes. That is why I added...
    it will disappear over time due to non-use.

  • User@IP-of-cucm showing up in call history

    I have several different types of telepresence codecs running TC 7.2 registered to CUCM 10.5.  I have a SIP trunk to a VCS control.  If I make an outbound call from CUCM to the VCS domain, it shows up in the call history of the cucm endpoint as user@ip-of-cucm, rather than the display name configured in the endpoint I am calling (please note this is not a "Use Fully Qualified Domain Name in SIP Requests" issue.  I have this option checked and the far end does see the caller ID as a SIP URI with FQDN).  If I call from that same VCS registered endpoint into the CUCM registered endpoint, then the correct display name shows up in the call history of the CUCM endpoint.  I've combed through a lot of SIP settings on the CUCM side but haven't found the right one yet.  Does anyone know what settings I should be changing?
    Thanks,  Mike

    Hi Mike,
    We are facing the same issue for a call between DX70 and SX20. The SX 20 is running TC 7.1
    If i upgrade the SX 20 to TC7.3, would the issue be resolved or will it still persist as the domain names of our CUCM and VCS are different ?? Given below is the call flow
    DX70 --> SIP Route Pattern --> VCS SIP Trunk --> SX20

  • Why is the call history time on the printout different than the phone?

    Why is the call history time on the printout different than the phone?

    How much different is it? A minute or two??
    Calls are triggered the minute you hit send, not answered. And the same when ending a call. So if off a minute or two for a call that is why.

  • Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" help any1?

    Hi! I brought an iPhone 4 off my friend at work. The day I brought it, it was working fine but now I can't seem to send any messages or make phone calls. The network is showing up fine but each time I try to make a call it says "call failed" I can't seem to send any messages either? I can use the Internet fine and everything else on the phone. Can anyone help?

    Hi chelsinator,
    You can reset the phone and it won't cause any problems or cause you to lose any data - Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears.
    The other thing you should do is to reset your network settings: Settings>General>Reset>Reset Network Settings. You will have to set up your Wifi again, but that oftentimes clears things up.
    Cheers,
    GB

  • What does an ignored call show up as in call history?

    What does it mean when it says cancelled call in the call history?

    What does it mean when it says cancelled call in the call history?
    That means you tried to call the number, but "cancelled" the call before the call went through.

  • How to turn off lumia520 time display on the scree...

    How do i turn it off? I just want to have the date display on the block screen. I have a watch so i dont want to look at the time on the phone. Also, how do i turn the lady's voice off when i am receiving a call? She keeps saying: call from ####.

    As far as I know the time display is built into the lockscreen although it could be alternative lockscreen allow you to modify how it shows.
    To turn off voice;
    Settings > ease of access> Narrator > OFF
    Although I am not a 100% sure on this..
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Maybe you are looking for