Show CEF adjency question
Switch#show adjacency gigabitethernet 9/5 detail
Protocol Interface Address
IP GigabitEthernet9/5 172.20.53.206(11)
504 packets, 6110 bytes
00605C865B82 000164F83FA50800
ARP 03:49:31
what is the meaning of 000164F83FA50800? Thanks.
The CEF adjacency table essentially contains the ethernet header to be used for sending frames out that interface. So in this case, the following applies:
Source address = 00605C865B82
Destination address = 000164F83FA5 (the first 12 characters of 000164F83FA50800)
EtherType = 0800 (which is the EtherType for IP traffic).
Pls do remember to rate posts that help.
Paresh
Similar Messages
-
Weblogic 12c Servlet Response - Special characters show up as question mark
My web app is running on Weblogic 12c (12.1.1) using WebWork + Hibernate. The program streams data (bytes making up a pdf) from a CLOB in an Oracle Database to the AsciiStream of the servlet output response. No exceptions are thrown, but the generated pdf contains blank pages. Comparing the bytes of the generated pdf, special characters are showing up as question marks.
Some of the bytes read in from the database contain 8 bits (correct data), but the bytes that the servlet return contain only 7 (all bytes with 8 bits become "1111111"). The number of bytes returned from the servlet is correct.
Code:
//Response is HttpServletResponse
response.setContentType("application/pdf");
response.setHeader("Content-Disposition", "inline; filename=\"test.pdf\"");
out = response.getOutputStream();
byte[] buf = new byte[16 * 1024];
InputStream in = clob.getAsciiStream();
int size = -1;
while ((size = in.read(buf)) != -1){
// buf contains the correct data
out.write(buf, 0, size);
// other exception handling code, etc
out.flush();
out.close();
"Correct" pdf byte example:
10011100
10011101
1010111
1001011
1101111
11011011
Incorrect pdf byte example:
111111
111111
1010111
1001011
1101111
111111
I have verified that the data read from the CLOB in the database IS correct. My guess is that the Weblogic server has some strange servlet settings that causes the bytes to be written to the servlet output stream incorrectly, or a character encoding issue. Any ideas?
Edited by: 944705 on Jul 26, 2012 10:17 AMSolution found, I'll post the work around to those who might encounter the same problem.
Somewhere in the layers of technology (webwork or weblogic I'd guess), the servlet response is encoded into UTF-8 regardless. The encoding in the database was ISO-8859-1. Sending ISO encoded bytes by UTF-8 caused the conflicting character codes (anything above 127) to show up as undefined.
The fix is to decode the input byte array into ISO-8859 string, then encode that string into UTF-8, which can be send by Weblogic.
isoConvert = new String(buf, "ISO-8859-1");
out.write(isoConvert.getBytes("UTF-8"), 0, isoConvert.getBytes("UTF-8").length); -
HT1752 My MacBook on startup shows file with question mark ,, what now?
My Mac shows file with question mark, what now.
Press the power button down to force a emergency use only hardware shutdown.
Press and hold the Option/alt key on the built in keyboard, boot the machine.
If MacintoshHD appears, select it and click the arrow, then in System Preferences > Startup Disk reset that. Done.
Sometimes a NVRAM reset is required then the above done again.
Folder with question mark issue
..Step by Step to fix your Mac
If MacintoshHD doesn't appear, or if it boots to gray screen or other issues, then it's more complicated of a fix, but once inside OS X then reset the Startup Disk.
Gray, Blue or White screen at boot, w/spinner/progress bar
..Step by Step to fix your Mac
You might need this if you don't have a recent backup and your problem is software related, Disk Utiltiy can't fix the drive and recommends you backup, erase and install.
.Create a data recovery/undelete external boot drive
If Disk Utility + Hardware Test shows no boot drive, then you have a dead drive or cable, or Mac issue.
My computer is not working, is my personal data lost? -
How do I reset my security questions? Normally people are saying something about a rescue email or a thing that will show where your password and security are for me it just shows my two questions and that is it.… Help
Go to Appleid.apple.com and choose Manage ID you can change them from there.
You can add a rescue email if you don't have one there too. -
Everytime i purchase from the apps store it always show the security questions and i cant buy the apps i want because the questions are not answerable. Pls help....
I think you need to reset those questions. You'll need to call the tech support for your country, ask to be connected to the Account Security Team and then ask if they can reset the questions for you.
http://support.apple.com/kb/HE57 -
Everytime I try to load system preferences the icon shows up a question mark and does not respond
Which icon is behaving that way? The one in the Dock, or the one in the Applications folder?
Does System Preferences open OK when choosing that item in the Apple menu? -
Have macbook mid 2009, with leopard, updated to yosemite, while erasing partition erased hd, dot have backups, powerup shows folder with question mark, inserting grey dvd shows apple and spinning wheel, please help
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. From here you can upgrade to Yosemite by re-downloading it from the Purchases page in the App Store. -
When I view the website using Firefox, it shows and plays beautifully. But, when I view it on Safari, there is a tiny question mark where the audio control should be, and no music plays. I'd really appreciate some help with this one.
Many thanks,
Joe Perrone Jr.
Author
www.joeperronejr.com (in case you want to see the site) It's the Home PageI just opened your site with Safari and on the Home page the music play straight away and then there is the player at the bottom right of the page which I can see with no problem at all.
Perhpas you need to empty your brower cache for it to display correctly - it seems to be working correctly for others here who have viewed it in Safari.
Check your preferences and perhaps clear your cookies and then empty your browser cache. -
My iMac has a blank screen showing an icon with a blinking question mark. I have rebooted and still the same. Any ideas?
Mac OS X: Gray screen appears during startup BTW, iOS info is useless, post machine and OS version specifics.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
ACE 4710 - show stats connection questions
Hi,
I have three questions regarding the "show stats connection" command in the ACE 4710:
1. What is the criteria for a connection to be added to the "Total Connections Failed" counter?
2. What is the criteria for a connection to be added to the "Total Connections Timed-out" counter?
3. Is there a command to get more information why the connection was failed or timed-out (e.g. to/from which IP, url accessed etc.)?
Thanks in advance for your help!
Best regards,
HarryHarry,
a connection failed if the server did not respond or resonded with a RST.
As long as the connection gets establised, it is counted as a success.
The connection timeout counter is incremented when the connection is idle for the configured timeout value or for L7 connections if it does not complete the 3-way handshale within the embryonic timeout interval.
Since this is clear why those counters are incrementing, the only way to get more information is to capture a sniffer trace to verify if the conditions above are met.
Gilles. -
Safari not showing images as Question Marks
Hello Forum,
we have a strange behaviour from a shop website in Safari for Mac and Windows Platform.
It is a site with frames. When i click on the Categorie Nagivation it comes to situations when one of the frames reloads.
After this frame reload the pictures only show as question marks. When i click one of the images it will reload the pressed picture and shows it. The other ones remain as question marks.
The System Layout goes like this: Apache Server takes requests and redirects it to an application shop Server.
Most of the Images are on Apache, the top navigation with the problem comes from the application server.
Does anyone has a clue where to search for this problem?
Firefoy and IE don't have this problem.
Regards
Jannis
P.S. its the newest Version of Safari installed on Mac or on Windows.Hi Carolyn,
thanks for your answer.
The setting is still checked in Apperances.
I tried to unckeck and check it again, but it woh't solve the problem.
What i think is, that Safari has a problem with our system design or with http headers he interprets in another way than other browsers.
What i found out too is, that there is Java Script. Are there differents how Safari interprets them?
Regards
Jannis -
See the attached image.
In the image:
Item A shows the Topic Title inside RH.
Item B shows what I'm typing in the Search tab of the HTML Help file. (I'm typing "GD&T").
Item C shows the list results. Notice that when I type "GD&T" in the search tab, the results return "GD?" ion the list of results.
In short the "T" is missing and the ampersand character shows a question mark character instead.
How can I get it to show an ampersand in this list and not delete the letter following the ampersand.
Thanks in advance,
Jared
Latest RH7
Vista 32 bit.Some co-workers of mine eventually helped fix this.
In the Topic Title field for topic titles that have the & symbol, you need to type & in place of just an & symbol. This causes the & to appear within the Search tab list results. Note however that if you add this topic onto the Table of Contents, it will display & there, so you will need to rename the TOC to just use &. -
Iphone 6 emoticons showing up as question marks
My iphone 6 is not showing emoticons in text messages, they are coming up as question marks. The messages are coming from an IPhone 4s to my 6, the IPhone 4s did the update for IOS and that has still not remedied the issue. I should also note that I can see and use emoticons in imessages. Any ideas on how to fix this?
ThanksI have been on chat with Quicken Support 3 times - each time, Quicken says that it isn't "their fault." But, I think, in fact, it is their fault. So I won't bug you any more. But in a nut shell, they have a built in PDF converter (from Amyuni) that has a copyright of 2008 in Quicken 2012. This is used to save the invoices as PDFs to a folder on your hard drive. Then you send that attachment to the client using email,. What I was told to do (in such broken English as to practically be incomprehensible), was open the file and SAVE AS - which will do so using the latest Adobe software that I have on my computer. If this works (I just sent a test off to one of my clients), then I will have to do two steps on every invoice in order to assure that it can be seen correctly.
-
I save several excel documents on my dock. Today I went to open one of the documents and the files were showing up in my dock as gray question marks. I am unable to open the documents or find them anywhere else on my computer! Please help!!
That may result in losing Dock icons for the Office applications (don't know why it should?) but shouldn't cause document icons in the Dock to disappear.
-
HELP -- KEEP LOOSING PICTURES -- after loading show up w/ question mark
Anyone ??!!
I have worked on this document for over 100 hours and made several saves in between, but keep loosing pictures all the time?
Lay-out stays OK, but the locations for many of the pics are indicated with gray squares and question marks!!
Is Pages unable to handle Larger docs with many pics? (I have already split into 2 docs of 27 pages, but problem remains)
PLEASE ANYONE?Hello Robert,
your documents are really huge. Are the files so big or are they so manyfold? If you have the possibility (with Preview or better with Photoshop/Gimp/Seashore) you should save the images with as low size as possible. Do you want to print the portfolio or it is for screen presentation only?
To see if there is a problem with Pages or with the images, you should have a look inside the docuemnt package folder. To do so, do a control-click onto the document icon and choose "Show Package Contents" from the appearing menu. In the new Finder window you can see all the files your Pages document contains. If you can find the images there about which Pages wrote it is missing, try to open some of them in am image editor to see if they are broken.
If you can open them, they are okay. I think the images are made with an digital camera. Of what resolution are the images? If you need the portfolio for screen purposes only, you can calculate them down to 92dpi and a proper pixel count (for smaller display ca. 800 to 600 pixel and for larger display ca. 1280 x 960 pixel). This depends on your own likeness. I only want to give you a guess.
Maybe you are looking for
-
I backed up my iPhone 3GS to iCloud. Activated my iPhone 5 and restored it from iCloud. But iPhone 5 will not backup to iCloud, only to my MacBook. When I try to turn it on on the phone it gives me an error that I must turn on Wi-Fi or turn off Ai
-
How do I upload software from a CD ROM to an iPad?
I am thnking of buying an iPad but since the iPad does not have a CD drive (thanks to those who just told me) how do I upload software from a CD ROM to an iPad? I have "Office for Macs" already on my desktop Mac but if I buy an iPad I will need it on
-
Hi , I would like to appear for SAP fico certification exams and would like to know how can I look for the exams dates ..also the course highlights...I really appreciate all your advise, Thanks Hirav
-
How to define field of number type in ecs file
Hi B2B Experts, I need some help. In the detail record of my ecs file, i need to define a filed as number. Basically the data coming in the data file is a dollar amount. It is a number type. The number length maximum length is 6, The spec file says t
-
Hi every one, While i am deleting PSA data i have gone these step selected <b>Info Source</b>>right click and select <b>Delete PSA data</b>->in the next screen given the data(19.12.2006) at <b>Before</b> ---> <b>start</b> after doing this i got an er