Show characteristic with zero figures in report

Dear All,
I have report as below:
Material        Qty
A                  0
B                  10
C                  5
D                  0
E                  2
I want to filter Material with zero quantity.
I've already try with condition Qty = 0, but the report will suppress zero value and
return not applicable data found.
How to make this happen?
Appreciate for any kind of help. Thanks.
Regards,
Steph

Yes Alice, I already try, but does not work
By the way, the figure - Qty, already show "0" (not blank, because it's from calculation).
Yesterday, I try to add a new CKF in query, add with "1" if the Qty return zero value.
And then I set the condition to this new CKF to activate, if the result the same as "1".
But it does not work either and return no appliable data found,
because the report automatically suppres the zero when I show Qty to the report,
although there is new CKF that return "1".
Regards,
Steph.
Edited by: Steph on Nov 5, 2009 4:08 PM

Similar Messages

Show groups with zero in crosstab

Post Author: JustinP
CA Forum: Crystal Reports
I am trying to get my crosstab to show groups with zeros in it, instead of suppressing it like it is doing. Any ideas?
Thanks in advance!

Post Author: DesertRecluse
CA Forum: Crystal Reports
I don't think Crystal suppresses 0 totals by default. Did you check the field format?

How to show records with zero on dashboard

hi expert,
if I have a dimension table product,
a fact table
if in the db, there are records with zero values of product A.
if the logical column for the fact is SUM(...).
how to show records with zero values on dashboard.
Use the outer join?
or other method?
I dont wanna use outer join because it makes the PRD be so complicated

hi,
Pull all the columns to criteria ,it will show NULL for a product
To get zero,on the fact column use IFNULL(fact_col,0)
which will look like this
http://a.imageshack.us/img180/6616/ifnull.jpg
thanks,
saichand.v

When I open firefox a large blurred logo show up with a figure holding a sign that says click here. Is this caused by a virus? What's going on?

Every time I open Firefox a large distorted logo (world image) shows up with a figure holding a sign that says click here. I'm concerned that I'v picked up malware/virus? I rebooted and it still occurs. Any thought?
ken

If you prefer not to see the snippets on the about:home page or otherwise experience problems with a snippet then you can set the browser.aboutHomeSnippets.updateUrl pref to an empty string on the about:config page.
Delete the storage\persistent\moz-safe-about+home folder in the Firefox profile folder with Firefox closed ("3-bar" Firefox menu button > Exit/Quit) to remove snippets stored in IndexedDB and make Firefox use a default snippet set.
You can reset the browser.aboutHomeSnippets.updateUrl pref via the right-click context menu to the default value to re-enable the snippets and make Firefox recreate the moz-safe-about+home folder.
You need to close and restart Firefox after changing the value of the browser.aboutHomeSnippets.updateUrl pref.
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)

Dont show balances with 0 amount in Reports?

Hi,
Can we restrict reports, developed through Report Painter, not to display the items of which the posting/balance is 0.
I have a requirement of not to show GL accounts that are with 0 balances in customized balance sheet?
Thanks

Hi Nayab,
Try this. In transaction code GRR2, call up the report in which you want to make the changes and proceed as follows:
1. Click on Formatting then Report Layout
2. In the pop-up screen, click on Representation
3. Under Zero Value, select the third radio button (' ')
4. Click on the check mark to continue and save your report.
5. Regenerate the report and you're good to go.
Hope the above helps.
Regards,
Elias

Deployed EJB.jar has some classes with zero bytes

Has anyone hit a situation where Windows Jdev 902 puts class files into the ....EJB.jar file with zero bytes? In my case, the eight zero length classes are: seven My...Row.class files and the MyApplicationModule.class file. They all are in the /mypackage/common/ package and are in the ...classes/mypackage/common/ file folder.
I can use PKZIP to delete the zero length classes and add them back into the .jar and everything works as expected.
There are no error messages generated during the deployment that creates the .jar file that has the problem.

This was posted on another thread by jdev team...
We have been following this issue in support TAR 2274825.996. I sent some technical detail to the support rep on July 10, but it looks like that information never got added to the TAR. Well, FWIW, here it is:
The user may be running out of open files. The
stdio library which underlies Win32 programs (like the JVM) has a
limit on the number of files that can be open concurrently. The
limit is around 2000-2100 open files (I tested this on NT, 2000, and
XP), and the limit is on a per-process basis. If the user is running
into this limit because JDev has too many open files, then the utility
methods we use to open JAR files or other streams could be receiving
a java.io.FileNotFoundException exception with the message "Too many
open files". To verify this: go to the Windows Task Manager, go to
View | Select Columns... and be sure the "Handle Count" checkbox is
checked. Does the jdev.exe process have a disproportionately higher
number of handles than other processes? If the Handle Count is above
2000 (approx), JDev might be running out of open files. (I say "might" because
the Handle Count is for many different kinds of Win32 kernel objects,
not just for file handles.) If the Handle Count is the problem, then
it would explain the transient, nondeterministic behavior that the
user is reporting. Because the Handle limit is per-process, it would
explain why the user is able to use PKZIP or WinZip to repair the JAR
file. Try closing editors before deploying and see if that helps.
If the user confirms that the Handle Count is excessive, then we may
have a Handle leak of some kind in the product that will need to be
fixed.
Also try running JDev using "jdev -hotspot" on the command line instead
of just "jdev" and see if the behavior changes.
Hope that helps. We are monitoring the TAR, but no one has been able to reproduce the problem you are reporting, even with the files attached to the TAR, and yours is the only report so far that we've received about this specific problem.
I have added several more entities and views into app module. As I added each one, the list of zero byte jar classes would change, but always about 7-8 bad ones. Now that I am no longer adding new entities/views, the problem has become stable and repeatable. The same classes ALWAYS show up with zero bytes.
I monitored jdevw.exe while doing the deploy, and the number of handles never went above 675. I ran with jdevw.exe -hotspot and the results were exactly the same.
thanks,
Roger

Items with zero stock quantity show negative stock value in Stock reports

When running Stock reports for controlling the stock value towards the GL accounts, some items appear with zero stock quantity, but the report still shows a stock value (negative value in my case)
How can this happen, and how can I correct this situation ?
System parameters are : negative stock is not allowed, Items with zero cost price not allowed. On item level average cost price method is used.
P.K.Johnsen

Hi Johnsen,
I believe you have checked the" Manage Inventory by warehouse". I have noticed this issue in SAP B1 2005B but this is rectified in 2007B. The system behaves in this way as the system maintains item cost for the item for all warehouses and even if the stock is not present in the warehouse, the system would still show you a value for the same. Hope this helps. please search the forum. You'll find related threads.
Thanks,
Joseph

Report Painter: Possible to show Report with Zero (not No records were sel)

Report Painter: Possible to show Report with Zero (not No records were selected)
Dear Guru,
is there any way to make Report Painter to show Report with Zero / 0 when there were no record were found. (No records were selected).
Regards,
Howard

hummm, I dont think so
THats not possible, as far as I know
Regards
Ajay M

Report painter- Characteristic can not be maintained with key figures

We have added new characteristic ZZFIELD1 in CCSS report sructure for reporting and selected it in gen. selection list. While running report painter report, it gives an error that ZZFIELD1 cannot be combined with key figures.
Any help to figure out what step is missing will be highly appreciated.
This is a PS report painter report using PS database profile in the selection of parameters for the report
Thanks

The fields we have added is ZZFIELD1 ZZFIELD2 in the PRPS table. And the key figures used in the report is;
AWKG - variance/accrual costs (basic key figure) with characteristic version 0, value type 32, fiscal year and period
SWKG - cost (basic key figure) with characteristic version 0, value type 4, fiscal year and period.
SMEG - quantity (basic key figure) with characteristic version 0, value type 4, fiscal year and period.

Report Painter - Characteristic cannot be combined with key figures

Hi,
I have added a new field (ZZABTEI) to the report structure CCSS and using that field as a characteristic in the report. But when I execute the report, it is giving the error "Characteristic ZZABTEI cannot be combined with key figures". Can anyone help me to solve this issue.
Thank you,
Rekha

There no code for this. I had to add the new field to CCSS structure. Then there were some configuration to be done. Then this message is got when the report in the report painter is executed. The details of this error message is as follows :
Characteristic ZZABTEI cannot be combined with key figures
Message no. GR410
Diagnosis
Characteristic ZZABTEI is being used in a report with a key figure that does not match this characteristic.
System Response
The system cancels generation.
Procedure
Check the report definition: the key figures used must be compatible with characteristic ZZABTEI. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.
Technical explanation: The Report Writer table assigned to the report is defined as a view with multiple database tables (somewhat similar to Report Writer table CCSS) and a key figure used in the report refers to a database table which does not contain characteristic ZZABTEI.
Example 1 for table CCSS: If the 'cost' or 'quantity' key figures are used in a report (referring to tables COSP and COSS), you cannot use the 'Statistical key figure' (only occurs in table COSR) characteristic in the rows. On the contrary, using the 'Cost element' (tables COSP and COSS) characteristic is not permitted for the 'Statistical quantity' (table COSR) key figure.
Example 2 for table CCSS: If a report only displays line item data (key figures IE... or PE...), you cannot use the 'PERBL' characteristic, because it is only valid for summary data. You have to use the 'PERIO' characteristic for line item data.
Thank you,
Rekha

Characteristic value zero show as #

Hi
In the HR cube 0PA_C01 'Headcount and Personnel Actions' there is a characteristic 0SRVCLEN for 'Length of service'. If an employee has less than one year seniority the value is 0, but in queries it is shown as '#'.
This may very well be the nature of a 'blank' characteristic, but in this case it is very annoying.
I would like to show a 0 (zero) as characteristic value. Can anybody help?
PS. The characteristic 0SRVCLEN should not be confused with the key figure 0SRVCLENKYF
Regards
Knud Pinholt

for the workbook use the vba macros sapbexonrefresh()
refer to the below link:
Re: How to display '#' as blank?
Regards,
BWer
Assign points if helpful.

Report painter:display of G/L with zero amount

Hi,
I have created a report in report painter for expenses by profit center. however the system is not showing the G/L for which no posting has been made although i have maintained those G/Ls in the report. Is there any way to display G/L with zero values also?
I am running the report at fiscal year level.

Hi, you can try to go the report painter (GRR2)
Formatting - section layout - Columns make sure the suppress zero columns is unchecked
and also you can go to Formatting - section layout - Columns - Treatment of zero rows - Print Zero Rows
Regards.

How to Display WBS's with Zero values in a report created by CJE2

Hi All,
I have created a report using CJE1 (Report painter). When I execute the report, it only shows WBS that have values. How do I display WBS elements that do NOT have values? i.e. display items with zero values. I'm certain there is a setting either within report painter or forms...
Help appreciated.
Samir

Menu>Formatting>Report Layout and then tab Rows. Check if setting under 'Treatment of zero rows' helps.
Regards
Sreenivas

[FlexPMD] flexpmd.html report created with zero bytes [Plz help]

hi folks,
initially i integrated FlexPMD with Maven.
when i tried to build it creates the following:
two folders:
* CSS --- contains css files
* Images --- contains image files
two files:
flexpmd.html -- created with zero bytes
pmd.xml -- it lists the violations.
my pom.xml
<plugin>
<groupId>com.adobe.ac</groupId>
<artifactId>flex-pmd-maven-plugin</artifactId>
<version>1.0.RC3</version>
<executions>
 <execution>
 <goals>
 <goal>check</goal>
 </goals>
 </execution>
</executions>
<configuration>
 <ruleSet>${basedir}/pmd-ruleset.xml</ruleSet>
 <outputDirectory>${basedir}/target/pmd</outputDirectory>
</configuration>
</plugin>
then i tried to integrate with Hudson, i configured this pmd.xml with hudson, its showing empty graph(see below)
could you tell me , why this flexpmd.html is generated with zero bytes and why i'm not able to see plotted graph
i tried the following version 1.0.RC4,1.0.RC5 and 1.1. but these versions also creating empty html report and some versions not running under hudson.
please provide the correct version and details to solve this issue.
please help in this issue, no help except this forum... i googled already did nt get any help.
correct me if i'm wrong.
thanks in advance.
Regards,
Mani

Hi,
What do you have in the console log?
Please, try with 1.1.
Xavier

Error GR410: characteristic cannot be combined with key figures

Hi,
My problem is in Report Painter.
I need to add selection by trading partner (or by vendor) in report 6OBU-001. For this Iu2018ve modified reporting table RWCOOM, in order to make available characteristic RASSC in the library 6O2.
Iu2019ve added Trading partner in General selection of my own report (copy of 6OBU-001), but RP gives an error message: u201CCharacteristic RASSC cannot be combined with key figures. Check the report definition: the key figures used must be compatible with characteristic RASSC. For examples of useful combinations of characteristics and key figures, see the SAP standard reports.u201D
Any opinions are truly appreciated.
Anton

I read this note before, but I still don't know how to write a ABAP code.
I need information from table COEP like sum of qunatity or costs. I have this information for Cost Elements and Orders in CCSS but I don't have for Materials.

Show characteristic with zero figures in report

Similar Messages

Maybe you are looking for