Show colored circles for a field inside table view
HI
I need to show Colored circles based on some conditions for a field (priority) inside a table view. HOw do i implement this solution.
PLease help
Hi,
You have two possibilities:
1. HTMLB charting
See http://www.sapdesignguild.org/resources/ma_guidelines_3/LAYOUT/chart_types.html for more info
2. IGS charting. See this weblog for info
/people/thomas.jung3/blog/2004/08/31/bsp-150-a-developer146s-journal-part-x--igs-charting
You will be certainly interested in this web log
/people/thomas.jung3/blog/2005/09/08/igs-charting-altering-the-customizing-xml-at-runtime
I don't know if you can combine stuff in a tableview.
See also chart graphics
http://help.sap.com/saphelp_nw04/helpdata/en/9b/d9883672d57c73e10000009b38f889/frameset.htm
Alternatively, you can try out the canvas tag in new browsers like Firefox. See /people/eddy.declercq/blog/2005/12/09/blank-canvas
for this
Eddy
Similar Messages
-
Search help for a field in table control based on another field value
Hi,
I want to attach the Search help for a field in table control based on another field value.
Please help me asap.
Will be highly rewardedHI,..
Check these links
search help in table control
Re: How to create Search Help for a field in Table control !!
How to create Search Help for a field in Table control !!
F4 Help In Table Control
Control table F4 help
Problem in F4 help in screen field
check this code
DATA: BEGIN OF it_value4 OCCURS 0,
TEXTCODE LIKE ZXX-TEXTCODE,
TEXTDESC LIKE ZXX-TEXTDESC,
END OF it_value4.
progname = sy-repid.
dynnum = sy-dynnr.
SELECT TEXTCODE TEXTDESC
FROM xxxx
INTO CORRESPONDING FIELDS OF TABLE<b> it_value4</b>
WHERE LOSS_CODE =<b> IT_VALUE1 .</b>
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'TEXTCODE'
dynpprog = progname
dynpnr = dynnum
dynprofield = 'ITVALUE-TEXTCODE' "-->UR 4 th filed value in screen
value_org = 'S'
TABLES
value_tab = it_value4.
endmodule.
Message was edited by:
veereshbabu ponnada -
How to create Search Help for a field in Table control !!
Hello Friends,
I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
SenthilCheck the sample code:
*& Include ZSRO_MPRN_SEARCH *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE. "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR: lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = c_x
determine_loop_index = c_x
TABLES
dynpfields = lt_dynpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
MOVE lt_dynpfields-fieldvalue TO ws_outcode.
ws_len = STRLEN( lt_dynpfields-fieldvalue ).
IF ws_len GE 7.
ws_len = ws_len - 3.
ws_icode = ws_code+ws_len(3).
lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
CONCATENATE lt_dynpfields-fieldvalue '%'
INTO ws_outcode.
CONDENSE lt_dynpfields-fieldvalue.
REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
ELSE.
CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
INTO ws_outcode.
ENDIF.
ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR: lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
TABLES
dynpfields = lt_dnpfields
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode.
ELSE.
MPRN blank and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1.
ENDIF.
ELSE.
MPRN exist and Post code exist
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE outcode LIKE ws_outcode AND
mprn EQ lt_dnpfields-fieldvalue.
ELSE.
MPRN exist and Post code blank
SELECT mprn ser_num sub_bud bud_name del_pt_alias
bud_num dep_street prin_street dbl_dep_street
dep_locty post_town county outcode incode
lg_site_ind file_date FROM zspa_mprn INTO
CORRESPONDING FIELDS OF TABLE i_mprn1
WHERE mprn EQ lt_dnpfields-fieldvalue.
ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MPRN'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select MPRN'
value_org = 'S'
TABLES
value_tab = i_mprn1 "lt_mprn
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
IF sy-subrc EQ 0.
Updating MPRN
MOVE i_mprn1-mprn TO i_mprn-mprn.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-MPRN'.
ws_dynpfld-fieldvalue = i_mprn1-mprn .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
Updating post code
CONCATENATE i_mprn1-outcode i_mprn1-incode
INTO ws_postcode
SEPARATED BY space.
MOVE ws_postcode TO i_mprn-post_code.
CLEAR : i_dnpfld,
ws_dynpfld.
REFRESH : i_dnpfld.
ws_dyname = 'ZSRO_MASTER_DATA'.
ws_dynumb = '0301'.
ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld-fieldvalue = ws_postcode .
ws_dynpfld-stepl = stepl_index.
APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
break gblap0.
ws_dynpfld-stepl = mprn-current_line.
LOOP AT i_mprn.
MOVE i_mprn1-mprn TO i_mprn-mprn.
MOVE ws_postcode TO i_mprn-post_code.
MODIFY i_mprn INDEX
mprn-current_line." transporting MPRN POST_CODE.
ENDLOOP.
**code changed by laxman 10.08.2005
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname
dynumb = ws_dynumb
TABLES
dynpfields = i_dnpfld
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ELSEIF sy-subrc EQ 2.
MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE. "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
gntc LIKE iflot-zzgntc,
END OF lt_gntc.
CLEAR: lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'ZZGNTC'
dynpprog = sy-repid
dynpnr = sy-dynnr
window_title = 'Select Gas Nomination Type Code'
value_org = 'S'
TABLES
value_tab = lt_gntc
return_tab = lt_returntab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc EQ 0.
READ TABLE lt_returntab INDEX 1.
i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE. "GNTC_F4 INPUT
*& Module mprn1_f4 INPUT
text
MODULE mprn1_f4 INPUT.
DATA: lt_f4 TYPE ddshretval OCCURS 0 WITH HEADER LINE,
lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
stepl_index1 TYPE systepl.
DATA : i_dnpfld1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
ws_dyname1 LIKE d020s-prog,
ws_dynumb1 LIKE d020s-dnum,
ws_dynpfld1 LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-MPRN'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " mprn1_f4 INPUT
*& Module pstlz1_f4 INPUT
text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
translate_to_upper = 'X'
determine_loop_index = 'X'
TABLES
dynpfields = lt_dynpfields1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
IF sy-subrc EQ 0.
READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = 'IFLOT'
fieldname = 'I_MPRN-POST_CODE'
searchhelp = 'ZS_MPRN_PC'
dynpprog = sy-repid
dynpnr = sy-dynnr
TABLES
return_tab = lt_f4
EXCEPTIONS
field_not_found = 1
no_help_for_field = 2
inconsistent_help = 3
no_values_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-post_code.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
ws_dynpfld1-fieldvalue = i_mprn-post_code.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
MOVE lt_f4-fieldval TO i_mprn-mprn.
ws_dyname1 = 'ZSRO_MASTER_DATA'.
ws_dynumb1 = '0301'.
ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
ws_dynpfld1-fieldvalue = i_mprn-mprn.
ws_dynpfld1-stepl = stepl_index1.
APPEND ws_dynpfld1 TO i_dnpfld1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = ws_dyname1
dynumb = ws_dynumb1
TABLES
dynpfields = i_dnpfld1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDMODULE. " pstlz1_f4 INPUT
Regards,
Prakash. -
Set back ground color to a particular cell in table view
hi,
iam working on a jspDynpage and have a htmlb table view for which i need a way to set back ground color to a particular cell in table view, the color has to be set based on a value..is there a way to do it without using an iterator...well iam using a cellRenderer for the table but cant find a way to set the colors...if anyone does have a way please do reply...regardsYou can mention the color in <b>textview</b> as well as <b>Label as follows:</b>
<htmlb:textView text = "<span style='background-color: #00FF00'>My Textview</span>"
design = "EMPHASIZED" />
<htmlb:label for = "MyLabel"
text = "<span style='background-color: #00FF00'>Label </span>"
encode = "false"/>
Reward each helpful answer
Raja T
Message was edited by:
Raja Thangamani -
Adding custom fields to table view assignment block
Hi All,
I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
Thanks & Regards
NitishHi Nitish,
As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
And following link will be helpful for AET creation.
CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
Regards
Loks -
How to hide fields in table view
Hi,
I'm populating the contents of an internal table in a table view. I want to know how to hide few fields in table view. I'm working on classical BSPs.. no MVC and I have not used iterator.
Thank you
Sreesanth.just to hide certain fields (columns) you dont need iterator. you could use columnDefinition attribute of htmlb:tableView tag.
to do this declare two page attributes as below
col_control_tab TYPE TABLEVIEWCONTROLTAB
col_wa TYPE TABLEVIEWCONTROL
now in the oninitialization event. fill col_control_tab with the required column details.
suppose the itab has columns 1 to 10 and you want to display only column 1 and 8 then the coding would be.
clear col_wa .
move: '1' to col_wa-columnname , " field name of column1 in itab
'This is the title of column1' to col_wa-title ,
'LEFT' to col_wa-horizontalalignment .
append col_wa to col_control_tab .
clear col_wa .
move: '8' to col_wa-columnname , " field name of column8 in itab
'This is the title of column8' to col_wa-title ,
'LEFT' to col_wa-horizontalalignment .
append col_wa to col_control_tab .
the finally
<htmlb:tableView id = "tv1"
design = "ALTERNATING"
selectionMode = "MULTISELECT"
onRowSelection = "MYROWSELECTION"
table = "<%= flights %>"
columnDefinitions = "<%= col_control_tab %>"
Regards
Raja -
How to provide F4 help for a field in table control
Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K -
Pages '09: Can't use AppleScript for selected text inside tables?
When I run get selection on selected text in a Pages document, I get something like this:
<pre>text from character 1 to character 4 of body text of document id 9943974 of application "Pages"</pre>
When I run get selection on selected text inside a table cell in a table in a Pages document, I get something like this:
<pre>text from character 1 to character 4 of some table of document id 3539679 of application "Pages"</pre>
When I run get selection on selected text inside a table cell in ANOTHER table in the same Pages document, I get the exact same thing. It still says "some" table. So there is no way to distinguish between tables if there are more than one table in the same Pages document.
Am I correct in understanding that this means that most AppleScript commands for manipulating text are unusable inside table cells?
For example, it seems impossible to get the properties of the selection when the selection is selected text inside "some" table. So it's impossible do anything about text styles, etc.
Is AppleScript support in Pages ’09 really that limited, or am I missing something?The first script below should return the character style of any selection made in Pages ’09, whereas the second script should apply the "XXX" character style to any selection:
--BEGINNING OF SCRIPT 1
tell application "Pages"
activate
tell application "System Events" to tell process "Pages"
-- Show the format bar:
if not (pop up button 1 of window 1 exists) then
click menu item "Show Format Bar" of menu 1 of menu bar item "View" of menu bar 1
end if
-- Show the styles drawer and character styles:
if menu item "Show Styles Drawer" of menu 1 of menu bar item "View" of menu bar 1 exists then
keystroke "t" using {shift down, command down}
end if
tell front window
tell checkbox 1 of group 1 of drawer 1 -- “Show or hide character styles.” checkbox
repeat until it exists
delay 0.1 -- wait until the styles drawer is open
end repeat
if description is "show character style" then click
end tell
-- Get the row index (although it is not a property) of the character style:
tell menu button 2 -- “Choose a character style.” menu button
click
set k to 0
repeat
set k to k + 1
if value of attribute "AXMenuItemMarkChar" of menu item k of menu 1 exists then exit repeat
end repeat
keystroke return -- hide the menu
end tell
-- Get the character style name:
if k > 1 then set k to k + 1
value of static text 1 of row k of outline 1 of scroll area 2 of splitter group 1 of group 1 of drawer 1
end tell
end tell
end tell
--END OF SCRIPT 1
--BEGINNING OF SCRIPT 2
set myStyle to "XXX" -- the name of the character style you want to apply
tell application "Pages"
activate
tell application "System Events" to tell process "Pages"
-- Show the format bar:
if not (pop up button 1 of window 1 exists) then
click menu item "Show Format Bar" of menu 1 of menu bar item "View" of menu bar 1
end if
-- Show the styles drawer and character styles:
if menu item "Show Styles Drawer" of menu 1 of menu bar item "View" of menu bar 1 exists then
keystroke "t" using {shift down, command down}
end if
tell front window
tell checkbox 1 of group 1 of drawer 1 -- “Show or hide character styles.” checkbox
repeat until it exists
delay 0.1 -- wait until the styles drawer is open
end repeat
if description is "show character style" then click
end tell
set characterStyles to value of static text 1 of rows of outline 1 of scroll area 2 of splitter group 1 of group 1 of drawer 1
set k to 0
repeat with thisStyle in the characterStyles
set k to k + 1
if thisStyle as text is myStyle then exit repeat
end repeat
-- Apply the character style:
if k > 1 then set k to k - 1
click menu button 2 -- “Choose a character style.” menu button
click menu item k of menu 1 of menu button 2
end tell
end tell
end tell
--END OF SCRIPT 2
I suppose that +paragraph styles+ should work the same.
I'm beginning to know Pages ’09 a little better now.
Message was edited by: Pierre L. (show format bar) -
F4 help for a field on table control
Hi All,
I have to display F4 help for a purticular field on the table control depending on one of the value in the row if the table.
There will be multiple entries in the table control and the F4 help for the field should change according to the value of other field in the row.
Can anybdy help me out doing this.....
Edited by: Alvaro Tejada Galindo on Feb 21, 2008 10:46 AMCheck the FM: HELP_VALUES_GET_WITH_TABLE_EXT
Check the documentation for example code.
regards,
Ravi -
Search Help(F4....) for a FIELD in table
Hi,
In SE11 I created a SEARCH HELP.
And I assigned it to a field in a table.
GOTO>Search help->for field.Here i assigned that created search help name and COPY.
**But it is not reflecting in screens.
Any one suggest me what to do or any thing else i need to take care.
Thnkas in advance.
Message was edited by: Deepak333 k
Message was edited by: Deepak333 kHi deepak,
This is the Search Help Process(F4) for a Particular Field.
Go to SE11.
Select Search Help Radio button : Any name with Z or Y.
Create.
Short Description : Any.
Selection Method : Table Name.
Dialog Type : Display Values immediately.
Search Help Parameter : Field Name (for which field ur doing in the table).
Exp : Tick it.
Lpos : 1 Just giving the position.
SAVE CHECK ACTIVATE.
Next Assign the Search Help to the table or field.
SE11.
Your Table Name : Change.
Search Help Button above the fields.
Search Help name : Your search help name.
Copy.
SAVE CHECK ACTIVATE.
Now go and check to the field by F4.
Thats it.
hope this helps you.
reward points for helpfull answers and close the thread if your question is solved.
regards,
venu. -
Best practice to define length for varchar field of table in sql server
What is best practice to define length for a varchar field in table
where field suppose Remarks By Person varchar(max) or varchar(4000)
Could it affect on optimization in future????
experts Reply Must ...
Dilip Patil..Hi Dilip,
Varchar(n/max) is a variable-length, non-unicode character data. N defines the string length and can be a value from 1 through 8,000. Max indicates that the maximum storage size is 2^31-1 bytes (2 GB). The storage size is the actual length of the data entered
+ 2 bytes. We always use varchar when the sizes of the column data entries vary considerably. While if the filed data size might exceed 8,000 bytes in some way, we should use varchar(max).
So the conclusion is just like Uri said, use varchar(max) or varchar(4000) is depends on how much characters we are going to store.
The following document about varchar in SQL Server is for your reference:
http://technet.microsoft.com/en-us/library/ms176089.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Checking for a field in tables
Hi All,
This Quiery is regarding searching for a field via where used list.Now we can search for a single field ..in which table that field is being used....
1) Can we make search still specific ..like in which tables that field used as primary field...ex: can i search for the ONLY tables in which werks as primary key..instead of all tables in which it is being used......
2)Now we can search for werks or matnr via where used list which gives all the tables which uses that..so basically we can search based on ONLY one field... can we make search for more than one field..For ex.i want to find a table in which both werks & matnr are used...instead of one...
3)extension to the above is let's say i have information of 4 fields out of which 2 are primary keys..how can i search for a table which contains all 4 fields ...and satisafying the primary key criteria....
In a nut shell, i want to know is there any way we can make field search more specific...than giving out all tables which is using the field...Hi,
in table dd03l use single values range in select-options to specify more than one field and use
keyflag = 'X' to get primary keys.
for example
se11-dd03l->fill fieldnames with matnr,werks
and keyflag = 'X' to get tables
having matnr and werks as key fields
Regards
amole -
Using Field Exit for a field in table KNA1
Hi everyone,
I am working on a ticket, the problem is we have a field called STRAS in table KNA1 which holds the address of the customer but now we want to increase the length of this field from 35 charachters to 55 due to some business requirement. SO my question is if this can be done using Field Exit and if yes.. can you please tell me how as I have never used Field exits.
Thanks,
RajeevHi,
Using field exit, you can only validate the data entry for the field (either globally or on a particular screen field)
This is usually done by implementing the field exit for the data element corresponding to the field(in your case STRAS_GP)
Hence you cannot increase the length of the field using the concept of the field exits...
Please note that after SAP R/3 4.6c, SAP has stopped the creation of field exits and there will be no support for any new ones created.
Regards
Shiva -
Multiple Entries for a field in Table
Hi All,
I needed to add field to a ztable, the options should include values from table LIKP-LFART and should allow for multiple entries.
I tried adding field with table type and structure type but error saying table type or sturcture cannot be used for table. Please let me know is there any other way how i can include multiple entries.
Thanks,Thanks Sandra and Advait. I have done exactly as advised by sandra, i have added check table as Advait suggest. Also, to test this for multiple entries how can i do this. or shouls i raise this in a new thread.
Thanks Again. -
Hi Experts
Can you explain me that, in table some of the fields has predefined values, whether its a value table or what.
Pls explain, how to set predefined values for particular fields to our own tables.
Thank in advance.
Regards
RajaramHi,
you can explicitly mention domain range as value table for the fields in the database table.
Also the search help can be maintained for the fields in SE11 transcation where the value table can be specified.
Reward appropriate points.
Regards,
Mansi.
Maybe you are looking for
-
So i put my iPhone 5c in Recovery Mode because it when i turned it on it did not go through the boot screen. So I put in Recovery Mode. Its says it will erase everything, and I just backed my iPhone to my laptop. Is there a way i can restore from tha
-
Find the Database where user defined function is ??
Hi, I have one user defined function , but i couldn't find where the function is and where the function is using.. anyone pls help me to overcome this one. Thanks
-
I work at a community college and we have a volume license for the full Adobe suite. All the software seems to update fine with the exception of Dreamweaver CC 2014 which after being updated goes from a fully licensed version to a 30 trail.
-
Hello all, I have been a BTBroadband customer for many years, I had a Voyager 100 modem/router overheat which caused the connection to drop every couple of minutes, this was about 6 years ago, I bought another Voyager 100 router which also did the s
-
How do I import photos to a external hard drive vs. mac hd?
I want to import photos into a external drive. The only information I can find talks about importing into iphoto library( on Mac hd). My drive will fill up too quickly. I need to import to a external drive, then import to iphoto without a copy. I bas