Show date on 2014 iMac

Does anyone know how to make the date show alongside the time in the menu bar? If not, how about on like a widget on the desktop. And why is it so dang hard to find such a simple change? Mac OS X

System Preferences -> Date and Time -> Date Options, Click on 'Show Date'.
Also, in the menu bar, click on the date/time part and then click 'Open Date and Time Preferences'.

Similar Messages

I keep getting a message that says i have not backed up for 2 weeksThe backup disk image "/Volumes/Data/JP's iMac.sparsebundle" is already in use. Latest successful backup: 10 January 2014

The backup disk image “/Volumes/Data/JP’s iMac.sparsebundle” is already in use.
Latest successful backup: 10 January 2014
what should i do ?

Hello JEANPIERRESONTA
Check out the troubleshooting article below to resolve issues with backing up with Time Machine.
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/ht3275
Regards,
-Norm G.

I have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. show i buy a new snow leopard disc fromapple

i have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. should i buy a new snow leopard disc from apple and install that as my new operating system. please help as had the computer a month now and still cant use it yet.

You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

Data in my iMac address book and iCloud contacts do not match.

The data in my iMac address book and iCloud contacts are different. How can I get my iCloud data to accruately reflect that of my iMac address book? It appears to be an initial synchronization issue. New entries synchronize fine. Appears that initial entries in my Address Book are not showing up in the iCloud Contacts list. Hense, My iPhone coantacts don't match those in my iMac.
Is there a way to clean out my iCloud contacts on reload/re-sychronize it with my iMac Address Book?

Nuts isn't it. This seems to have been an issue snce dAY 1. iT FROSTS ME THAT THERE IS NO SIMPLE QUICK WAY TO UPDATE OR CORRECT the data in both programs simultaneously.. Thats why i decided to just put everytning into the i cloud address brook, and let the one other sit and rot.
then i got smart and said, why don't I delete the outlookaddress book files. and save on confusion.
result - both addresses books and their contents became invisible to outlook.!!!!!! and I can find no way to correct this...to go back to the imperfect world that was.
I did get the outlook contact s back from an archive - but any thing from icloud has become inaccessible from outlook. (fortunately i can get the vcard infformation directly from icloud. but I can't access it from outlook mail.... means no replying, forwarding etc - and a time swallowing nuisance..
aNYONE WILLING TO DUMP SEWAGE ON MICROSOFT AND aPPLE... UNCOOPERATIVE TWITS. - boh should be smacked.

When downloading/uploading any file with Firefox, Finder shows date but not time

On my iMac, as I either upload or download a file using Firefox after installing Lion, the Finder window that opens for me to tell it where to either download the file to or upload it from, shows dates of all the existing docs there, but not the time. How can I make it show the time as well?

I have found the problem.
A download manager had been installed for a specific website and it was butting in all the time. Even after removing it with 'Add or remove software' it still had its hooks into the system and it was impossible to download anything as it now would not run.
Had to do an XP 'System restore' before I could get rid of it.
The offending program was MD_setup.exe size 3,045KB from the themediadownloader.com

My CC desktop shows Dreamweaver CC (2014) is installed by it is not how can i fix this

My CC desktop shows Dreamweaver CC (2014) is installed by it is not how can i fix this so i can install 2014 version?

Hi Pathfinder_1CAV,
Please follow the link: CC desktop lists applications as "Up to Date" when not installed and this will help you to fix the issue.
Let me know if you face any issues while doing that.
Thanks,
Ratandeep Arora

I m trying to transfer my data from my imac to my macbook pro using transfer manager i m connected to wiifi it says that the process will take above 55 hours ? I have only 38gb to tranfere ? Why so long isnt normal

Hi
I m trying to make a transfer to all my data from my imac to my macbook pro with wireless ... And using my transfer manager as requested but it show 55 hours time to download ? Whats wrong ?

So there are several factors that may point to why your transfer is going to take so long. First and foremost it is going to be the type/speed of wireless you're using. Your router and computers should all be using the same type of wifi (ie 802.11G or 802.11N). That will ensure the best "theoretical" transfer speeds across your network. Depending on what type of router you have and what type of wireless cards your computers have that will determine the max theoretical transfer speeds you could achieve. For instance the fastest available wifi is currently 802.11N at approximately 300MB/S maximum transfer speed. Realistically you'll probably see about 10% of that.
Secondly the speed of the computers and their hard drives will also play a large factor in the transfer time. If your computer has a slower processor or uses a lot of virtual ram (which uses the hard disc drive) you will experience slower transfer speeds.
As seventy one said you will experience MUCH faster transfer speeds over ethernet. You will especially noticie faster speeds over gigabit ethernet. Gigabit speeds require both computers to have a gigabit ethernet port and a router with a gigabit ethernet switch.
With all of that being said depending on other variables the connection may speed up and slowdown depending on current network traffic and your transfer time may increase/decrease accordingly. I would suspect it won't take 55 hours.

IPhone 5 shows data in Photos that doesn't exist.

iPhone 5 shows data in Photos that doesn't exist.
iPhone 5, 16GB running iOS 8.1.2. Service through Verizon. iCloud Photo Library (Beta) is off. My Photo Stream is off. iCloud photo sharing is off.
Under "About" in settings it says there are 32 Videos and 429 Photos on the device with a capacity of 12.6GB and 7.0GB available.
Normally, I used to import photos and videos from Preview and manually delete them on the phone, until I realized this could also be done in Image Capture with the ability to delete all of them with one click, which is what I did this time (I have done it through Image Capture at least once before).
I've tried in this order: Creating an empty folder and syncing to it through iTunes. That didn't work, so I created a backup on iTunes, completed the "Erase All Content and Settings" option on the phone and then I restored from that backup. Still no luck but I'm wondering if I just saved the issue in the backup and restored back to it. I really don't want to do a complete erase and start over, but if there are no other options I will try it.
Ideas? Thanks in advance.
EDIT: Photo shows iPhone in iTunes after restore.

I tried this and it did work for me! It was on a separate posting.
Good luck!
scabthepoetMar 15, 2015 2:00 PM Re: My iPhone 5 camera roll is empty, but under usage says 3.1GB - how can I delete?
Re: My iPhone 5 camera roll is empty, but under usage says 3.1GB - how can I delete?in response to armccoyHelpful
I've been searching for an answer to this very problem for a solid day. Here is what I did that worked for me. No reset. No need to upgrade to more Cloud storage or anything else. I had already deleted out every picture from my phone, including "Messages" and the "recently deleted" album, etc. There really are phantom pictures in there, but the only way to see them and delete them is to:
Go to Settings
Date & Time
Untoggle "Set Automatically"
Manually change the date back. For example, if today is March 15, 2015, choose August 1, 2014. (You can change it back once we're done)
Close out of that
Open "Photos"
Select "Albums"
If, like me, you had already cleared out everything from the Camera Roll and "Recently Deleted" folder, you'll smile to see that your "Recently Deleted" folder now has thousands of images back. Those are your phantom photos
Open it, "Select" and start deleting
Now, go back into Settings - General - Usage - Storage - Manage Storage - and you'll notice your Photo & Camera is empty if you deleted everything
I hope this works for everyone and that I saved you all the time I wasted searching for an answer myself -- only to never find one. Now you have the answer.
I went from barely having any room left on my phone to almost brand new again.
Take care.

Transferring Data From Old iMac to New iMac

I've tried searching the forums on this topic, and I can't find the exact answer I'm looking for.
I just got my 20" iMac CoreDuo and I'm trying to transfer Data from my old 17" iMac G4. I've got the two computers hooked up through Firewire and I was running the file transfer from the initial set-up, but it seems to have froze up on me. I have a lot of data, my G4 iMac is pretty much full and it showed about 6 hours of transfer time.
I guess my question is, how can I keep my new iMac from going to sleep in order to finish the data transfer? If I can't do this, what other ways can I get all my files over to my new computer?
Thanks in advance...
17" iMac G4, 20" iMac CoreDuo Mac OS X (10.4.4)

hey, i just finished transferring files and i have pretty much the same set up. Moved 35GB from imac G4 to the 2GHZ intel mac, via firewire. FYI, upon the initial transfer it states an approx completion time and amount to transfer. The time is FAR from the actual move. Mine stated 2 hours and about 30 minutes I think. The transfer was complete in about 20-25 minutes. So don't go by that.

I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank you

Then why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

PLD Report does not show data from Query

Hello,
SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
Thanks,
Nick

Hi Nicholas,
Please check below links.
query based print layout design
Print Layout Designer \Custom Reports
How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
Hope this help
Regards::::
Atul Chakraborty

Discoverer Plus 10gR2 not show data when the script of view have package

Hi my friends.
I have a problem with discoverer plus, I don't know is a problem or I'm doing something wrong.
I have a four views, the views containg in the SELECT stament and WHERE clause packages, example:
SELECT d.price,
d.total,
d.min,
d.mx,
TO_CHAR (SYSDATE, 'q') quarter,
d.fid,
k_xdcd_qry.f_xdc_obt_price (d.prod, d.id) --> package
k_xpxpd_qry.f_xpeds_salary_ca_u (
d.prod,
d.id) xp --> package
FROM px_prices_proc c,
xp_sla_max d,
xmp_sla_puc b
WHERE a.prod = b.prod
AND a.id = b.id
AND a.prod = k_xps_tools.f_obt_prod --> package
When I used the views on discoverer plus for construct the report, when execute the query not show data.
Appreciate it if you could help or tell me I'm doing wrong or does not support Discoverer Plus package execution.

Hi Tux,
This appears to be a grant issue. Apparently, you have granted execute with respect to this package to the EUL owner or the view would not have compiled. If you have not given EUL owner the grant option, I would recommend doing this as well.
This appears to be an Oracle APPS EUL (tell me if I am wrong). If this is the case, it goes without saying that APPS will need to be granted the execute privilege.
Also, by default, a stored package executes with the privileges of its owner. If your custom package was designed this way, are the objects which it references received the appropriate grant? I assume you tested this, but I am concerned that the line, a.prod = k_xps_tools.f_obt_prod, in the where clause could be resulting in the Null set being returned.
Patrick

Not able to show data of prior three quarters,periods along with QTD , MTD

My requirement is when user selects a date then we have to show data in the report for three ago quarters data and QTD, three ago periods data and MTD.
eg: let the user selects a date in the 2010 Q 2(May-21-2010) then report should show
2010 Q 1, 2009 Q 3, 2009 Q 2, QTD(2010Q2 till 21st May), Feb-10, Mar-10, Apr-10, May-10 (MTD till 21st May).
I have created Ago metrics, Todate time series metrics for quarters and periods...
but Ago metrics are not working when Todate metrics are filtered with date prompt,
if I remove date filter then Todate metrics are not working (means not showing correct results).
Also I tried to create logical columns in BMM layer by using filter condition with enterprise qtr, enterprise periods.
but major problem is I am unable to go back to previous quarters and periods for the date user selected.
I am struggling for it a lot, Please assist me
Any response is highly appreciated.
Thank you,
Ramanujan.

found the problem
thanks

EXCEL out put is not showing data

Hi All,
My report is working fine it is showing data in XML but it is not showing data in Excel output. Excel output is empty.
i have attached excel and xml files. please help me.
FYI: these are migrated reports from 10g to 11g.
Thanks in advance for your time

Using ua.bat we upgraded 10g to 11g., we got sucessfully message.
after upgrade if i try to open excel it is not showing opening and showing action instead of excel name . I though excel out put has corrupted. i downloaded excel layout from 10g and uploaded in 11g report using upload layout.
we did not make any changes in database.
below one is not related to this one but .. after upgraded reports multi parametrs did not work if i select more than one column ( i opened as different topic) then i have removed
( (coalesce(null, :P_PPD_REGION) is null) and kept(region.X_REGION in (:P_PPD_REGION) from following statement then i did report is working with multi parameters.
my doubt is is it correct thing i did ? if not how can my multi parameter will work . we are using oracle as database.
AND ( (coalesce(null, :P_PPD_REGION) is null) or (region.X_REGION in (:P_PPD_REGION)) )
AND ( (coalesce(null, :P_COUNTRY) is null) or (region.REGION_CD in (:P_COUNTRY)) )
AND ( (coalesce(null, :P_SITE_NUM) is null) or (ptcl_site.site_num in (:P_SITE_NUM)) )
I really appreciate for your support.

2lis_03_bf data is not showing data in RSA3

Hi,
I have loaded 2lis_03_bx first for a plant using MCNB transaction,its showing data in RSA3 then I have loaded 2lis_03_bf datasource for the same plant using transaction 0LI2BW. but it is not showing data in RSA3.
I have done the above process in background.
In SM37 it is showing the following message for the 2lis_03_bf datasource
<b>Job started
Step 001 started (program RMCBNEUB, variant &0000000000003, user ID TCS_SRM)
Date fields for info structure S032 are not generated
Job finished</b>
steps:
1.Before loading the data I have deleted data using LBWG
2.In LBWE, 2lis_03_bf is already activated.
Please help me out on resolving the above issue
Thanks in Advance

ODS Settings
BEx reporting option --> If this indicator is not set, no SID's are generated for the new characteristics when the data in the ODS object is activated.This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries.
Refer this link for more information...
http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/frameset.htm

Show date on 2014 iMac

Similar Messages

Maybe you are looking for