Show different domain suffix in Explorer keypad

When using the keypad to enter the url of a website, the second button bottom left has the letters .co.uk
How do I change these to the country I reside in? eg. .co.za

I think that is linked to the keyboard . Long press on that key will throw open some more options but still you may not get it unless there is a keyboard available specific to SA .. Check under settings-->keyboard-->add keyboards ..

Similar Messages

Dynamic CRM connect outlook Client with different domain

Hi Guys,
I had installed CRM 2011 in cloud with different domain.
If I use browser is working fine just that when i use Outlook client it show
15:24:16| Error| Exception : The request for security token could not be satisfied because authentication failed. at System.ServiceModel.Security.SecurityUtils.ThrowIfNegotiationFault(Message message, EndpointAddress target)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.GetNextOutgoingMessageBody(Message incomingMessage, SspiNegotiationTokenProviderState sspiState)
I found that is because you must connect to the same domain.
any idea that i can use my Outlook client to connect to CRM 2011 without changing my domain?
Regards,
Kim

Yes - I've been scarred with this for many years :(
If it is just CAS 1 that is causing issues, then focus in on that. The support statement for Win 2008 R2 is that NLB is still a 3rd party component and support may ask for it to be disabled.
http://support.microsoft.com/kb/278431
Does CAS1 and CAS2 have the same NICs (firmware as well), driver, teaming software, and teaming config?
I also want to ask what the network team did for configuring the switch ports on the servers? This will vary from vendor to vendor - did they do the same config on both?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Thanks Rhoderick, issue still persists
can you also help clarify what you meant by "configuring the switch ports on the servers"?
thanks again

How do I get a new style domain suffix based email to work on a form, eg info@markclarke.photography It states it's invalid

I have a contact form and when I add the email address to send it to, [email protected] it won't allow me to. I apprecaite these kind of domains are new, but I need to be able to send to my business email. Can you help please? Many thanks

Hi
This needs to be implemented asap please as it can cause a server issue to have a different email suffix to that on the site, not to mention it means I have to sort an additional email address out.

Deploy SCOM 2012 R2 Agents to Domain Servers on Perimeter Network using SCOM Gateway on different Domain

Hi, I have a bit odd situation on a SCOM 2012R2 deployment.
I have a MS on the internal network, and a Gateway Server on the perimeter network. Each server is connected to different Active Directory Forests and there are no trust relationships between them. I configured the communication between the two using certificates.
I have already connected some servers through the Gateway using certificates because there are on Workgroups, they are already approved on the MS and reporting their status.
However, I have some servers that are member servers of the internal AD domain but are located on the perimeter network.
So I've tried to configure one of them for testing to connect to the Gateway Server using a certificate using manual agent installation. Initially it didn't report on the SCOM, but then I ran the get-scompendingmanagement and saw that it showed there,
so I ended up approving the agent using Powershell and then it was reported on the Console as "Not Monitored"
First the agent was running as local system and then tried using a local admin account on the server, neither options have worked.
I get the following errors:
The OpsMgr Connector connected to scomgateway.externaldomain.com, but the connection was closed immediately after authentication occurred. The most likely cause of this error is that the agent is not authorized to communicate with the server, or the
server has not received configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
OpsMgr was unable to set up a communications channel to scomgateway.externaldomain.com and there are no failover hosts. Communication will resume when scomgateway.externaldomain.com is available and communication from this computer is allowed.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Is this configuration possible? Or do I need to open communication ports from the agents to the MS inside the corporate network and not use the Gateway?
Any ideas if someone else has done this are appreciated.
Thank you.
Regards.
Eduardo Rojas

I'm sorry, maybe I didn't explained myself correctly, I already have the gateway up and running with some Workgroup machines connected to it using certificates, so the Gateway is indeed working. These Workgroup machines are in fact reporting back to the
Management Server on the internal network through the Gateway.
My problem is with Domain Member machines that are on the perimeter network. This machines are joined to the Active Directory inside the corporate firewall, not the Active directory from the perimeter network (where the Gateway is joined). So my question
is, can I connect these machines through the Gateway (even if the Gateway is on a different domain) or do I need to open ports and connect them directly to the management server (which is on the same active directory domain)?
Let me know if I made myself clear.
Thank you.
Regards.
Eduardo Rojas

Mapping users coming from different domain in AD

HI,
We have configured vintela SSO which is working.Now we are trying to add another domain but it has been unsuccessful.
We have imported the users coming from other domain in CMC->AD, and UseFDQNDirectoryForServers parameter in registry.
The issue is our complex krb5.ini errors as "cannot find kdc for realm" for the user account coming from the other domain.The existing domain kinit is successful.
Please help in resolving this issue!!! We need to have users coming from different domain to use vintela SSO.
Thank you.

well you're mixing things up a bit.
The usefqdnfordirectoryservers is used to map in groups. If the groups show up as well as the users that piece should be complete.
the krb5.ini is for logging in users manually, it must conatin the KDC for every domain that may contain users that need to log into BO. It also must have a KDC or capath entry to define all the parent domains as well (even if they do not have members that need to login. This is how the krb5 is used to verify transitive trusts. Then all users that are not in the default domain must logon as username@ DNSDOMAIN.COM where the DNS domain is entered in all caps aqnd represents the FQDN of theidomain the users bewlong to. Now if not logging in manually this should be a big problem.
So for SSO (vintela anyway) this process is automatic, although you may want to configure vintela with site information so it doesn't randomly use all your DC's Site can be set following the steps at the end of business objects note 1261835 (complete and vintela only editions).
In order for vintela to work properly the value entered in CMC > Authentication > Windows AD > service principal name must = an SPN thet was created on the account that is running the SIA/CMS
Regards,
Tim

Software inventory report and PC show different information

Hi,
The scenario is the following:
SCCM 2012 R2.
Clients with windows 8.
The report "Software registered in Add Remove Programs on a specific computer" and "Programs and Features" show different information.
Programs and features screenshot(ordered by name):
Report screenshot (ordered by name):
The question is:
Is the above normal behavior?
if not
How to get in the report "Software registered in Add Remove Programs on a specific computer" all of the software listed in "Programs and Features"?
Thanks in advance!

Take a look at that device in Resource Explorer. Notice that on a 64-bit device there is an 'Installed Applications' class and and 'Installed Applications (64)' class. This data comes from the registry, and on a 64-bit operating system there
are actually two separate 'Add/Remove Programs' lists that are aggregated in the OS user interface.
If in Resource Explorer you see all of the software you expect to see, but not in the report, it is likely because the report is only looking at the 'Installed Applications' class and and not 'Installed Applications (64)' class.
If you enable the 'Installed Software' class (either by going into the client settings or the AI node), you will notice that the 'Installed Software' class is a combined version of both the 32-bit and 64-bit applications. This is much easier to report
off of.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

IWeb won't display different Domains after upgrading to Lion?

After upgrading my MacBook Pro to Lion 10.7.2 my iWeb 3.0.4 program won't open different Domain files. Even though I have several different Domain files on the hard drive, no matter which one I try to open it always shows up as the last Domain opened by iWeb. If I remove the last opened Domain file from the hard drive and try to open one of the remaining files everything is OK, except if I again try to open a different Domain it also shows up as the last opened file.

Your unique question is often discussed.
Search this forum for Lion. You'll find this answer :
where do I find "domain" in Lion?
Or look to the right where it says : More Like This.
Or have a look at this movie :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html
Or wait for our resident technology experts to provide the answers from the search.

Domain suffix search howto in DHCP

I was hoping to use dhcp to configure domain suffix search . not sure where to begin.
tried using a GPO but we have to many developer that need to be able to modify the domain suffix search order locally etc.
migrating domain server and users to a new domain and they need to be able to resolve name with using the FQDN.
thank you
windows 2008r2 DCs

Hi,
DHCP option 015 DNS domain name defines primary DNS suffix.
And domain suffix search list is usually defined via GPO.
Here I think we can create a different GPO and apply to those developers need to modify it.
Hope this helps.

How to manage ApplicationDomain for loaded SWFs across different domains?

I've been getting this following error -- when I'm loading a subsidiary SWF into a main one. The sub swf contains the overlays. OverlayOne is a subclass of Overlay.
TypeError: Error #1034: Type Coercion failed: cannot convert OverlayOne@18684f89 to Overlay.
     at HSRawVideoPlayer/setCurrentOverLay()
     at HSRawVideoPlayer/showOverlay()
     at HSRawVideoPlayer/dotRoll()
I googled and found that I should probably be setting the applicationDomain of the loader context of the loaded swf to be that of the loading SWF (as per Senocular's article on the subject) -- although I thought that in cases of conflict this would resolve to the loading SWFs ApplicationDomain, so not necessary.
But I've also read that this won't work across different domains, and that's the situation here -- the client wants the urls of loading and loaded swf's to be fully qualified . Will setting the ApplicationDomain of the loaded SWF to be that of the parent solve the problem above, even if they are in different domains? Can someone show me a short code snippet? Thanks!

Hi,
DSS has inbuilt functionalities to compare the transactions against the in built rules.If the transactions take place not in accordance with the in-built rules,it is treated as a "violation" and is reporetd.
Virsa is an example of DSS tool.Here you can build rules for access and process ;constantly compare the actuals Vs the rules;report the violations.
In SAP R3 for example,the T/code:pfcg is tailored for access control,while the invoice parking [f-63] is tailored for process control.Using VIRSA,you can address to risks involved both,namely,access and process control.This is an example of how DSS can help in Risk integration.
In these tools,we have an Engine for building the rules-based on this we build the rules.These rules are stored in a table.when a transaction-for which we have built a rule - takes place,the system compares the rules VS actuals.The inconsistencies if any are reported as violations.
Hope this helps.
Regards,
Ramesh

Run as different domain user.

Hi,
Need to test a new Windows login in SSMS.
I setup a shortcut as below but I seem access SSMS using the domain account I specified in the shortcut, even though I have been prompted for the password.
C:\Windows\System32\runas.exe /netonly /user:rkh\sqlmonitor "C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\Ssms.exe"
Any ideas?

Are you trying to connect the SQL server from machine(SSMS) in different domain ?
Try below link , it really works for me, i using this to connect to SQL server in different Domain
1) Create generic Credential in Credential Manager(control panel) with sql server(with port) and username/password
2)Run as with the username which is specified in the generic Credential(may be you can create short cut if you frequently access the SQL Server)
C:\Windows\System32\runas.exe /netonly /user:[domain]\[username] “C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe”
Note: in SSMS it will display the local userid(domain id) in object explorer, you can verify tin by running(suser_name())
Refer
http://www.mssqltips.com/sqlservertip/3250/connect-to-sql-servers-in-another-domain-using-windows-authentication/
Thanks
Saravana Kumar C

Where can I strip the domain suffix on ACS 5.1

Hello,
I valued the ACS 5.1. Now I habve the problem, that on EAP-TLS the binary coparison of certificates failed. In our old ACS-Server their is an point named strip domain suffix on the EAP-TLS configuration page for the Active Directory. In the ACS 5.1 Version I can't find this point but I think I need it.
How can help me?
Nice regardes
Torsten

You must be thinking about another browser. FireFox has a Tools menu--Safari does not. Most of the things FireFox puts under its Tools menu are found in Safari preferences.
Editing or customizing the toolbar is accessible through Safari's View menu. If you need advanced features found unde "Web Developer" in the FireFox Tools menu, you can activate Safari's "Develop" menu by doing Safari > Preferencs and selecting the "Advanced "tab. At the bottom is a checkbox to show the Develop menu.
Here is a comparison. FireFox's "Tools" menu with the web developer options expanded:
Safari's "Develop" menu after activation:

IMS 5.2 : user with 2 email-addresses in in different domains

in iMS 5.2, how can I add an user and configure MTA to accept 2 email (and mailalternateaddress) in 2 different domains ?
uid: joe
mailalternateaddress: [email protected]
mailalternateaddress: [email protected]
I have "o=siroe.com, o=isp" and "o=sunroe.com, o=isp" ?
and in o=internet.com, dc=com ... how to point these domains ?

The default structure is set up not to allow what you want. Initially I thought you could get an entity to receive mail just by putting the address you wanted as mail= or mailalternateaddress=. But it turns out that it uses both the directory structure and the individual properties. That is, if you send mail to [email protected], two things must be true:
- the entry for user must be in whatever hierarchy is pointed to when you track down dc=foo, dc=com, o=internet.
- the user must have mail= or mailalternate= with [email protected]
The problem is that your uid joe has to be located in o=siroe.com,o=isp in order to get mail addressed to anything @siroe.com, and in o=sunroe.com to get mail addressed to anything @sunroe.com. Since directory aliases aren't implemented, an entry can only be in one place at a time.
However there is an approach. In imta/config/option.dat, normally you have ALIAS_URL0, with ALIAS_URL1 and 2 commented out. If you add ALIAS_URL1=ldap:///$B?*?sub?$R, then if it can't find an entry in the appropriate place, it will do a global search for any entry with a matching mail= or mailalternateaddress=. I believe in your configuration the search will be all of o=isp. You can watch the access log in your directory server to see what the actual lookups are. If $B doesn't work you can hardcode o=isp in the URL.
Another approach would be to forget the structure entirely and just replace $V with $B in ALIAS_URL0. That depends upon how your system is going to be administered. If the administrators for the various domains are independent, you want to give entries in the domain priority access to names in the domain. That is, if there are several entries with mail or mailalternateaddress attributes of [email protected], you probably want to give priority to the one actually in siroe.com. Hence my original suggestion.
Note that I'm using direct LDAP access. I make no guarantees if you're not doing that.
When testing this sort of thing, remember that lookups are cached for 10 min. This can produce odd effects when you're testing. Changes seem not to do anything.
A better way of testing is to do "imsmta test -rewrite [-debug] foo@bar" That will show exactly how an address is treated, and if -debug is specified, you'll have a decent chance figuring out what it doesn't work the way you expected.

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

You could just try changing your Input Sources under System Preferences>Language & Text:
But I kind of doubt that's going to work. It may be a hardware problem or a system problem. If you take it into Apple they might be able to determine which and might advise a reinstallation of System software. I would take it to an Apple Store or an AASP but, first, make sure that you have a backup just in case they suggest a clean install of the system.
Good luck,
Clinton

After connecting a late 2008 MacBook to an external monitor can I show different images on them?

After connecting an external monitor to my MacBook(late 2008) is it possible to show different images on the two screens at the same time?
TIA

Yes. Open System Preference (under the Apple menu) and select Displays. See the instructions in this Apple article for how to continue.
Best of luck.

MB5B shows different opening quantity when we select diffferent Stock Type

Dear All,
I am trying to run report MB5B - Stock on posting date with 2 different Stock Types:
- Storage Loc/Batch Stock
- Valuated Stock
But the report shows different opening quantity,total receipt, total issue, but closing quantity is ok.
Could you pls tell me the reason?
Thanks
Cao Huy

Hi,
MB5B transaction is used to display the stock on posting date
It is not possible to view at the same time both Valuated stock and special stock. This is radio button input control,so any one of the stock type only possible to display the material document.
This report display the material and plant vise material document number and total stock and total issue etc for the example,
Plant            1256 test plant
Material         TH1
Description    steel rod
Stock on 01/01/2010                   0.000 PC
Total Receipts                      29.500 PC
Total Issues                         3.000- PC
Stock on 12/31/9999                   26.500 PC
SLoc MvT S Mat. Doc. Item Pstng Date          Quantity BUn
TEST 101   5000003029    1 12/23/2009            1.000 PC
TEST 101   5000003039    1 12/31/2009            1.000 PC
Regards,
thiru

Show different domain suffix in Explorer keypad

Similar Messages

Maybe you are looking for