Show different dropdownlists according to the selected value
Hi All,
I need pop up a different dropdownlist according to the selected item in one dropdownlist.
.e.g. if I select state in one dropdownlist, another dropdownlist contains all the states will show up beside it.
Any one can help me?
Thanks a lot
There are two ways of doing it. Both involve javascript
1 - capture the onchange event of the first dropdown. Submit the page, and reload it with the correct values for the second dropdown list
2 - If there aren't that many different options, you can download all the different option lists into your page. Capture the onchange event of the first dropdown, and then use javascript to set the values in the second dropdown box.
Both have pros and cons. The first option requires a page refresh. The second one requires that you download all possible options to the page.
Good luck,
evnafets
Similar Messages
-
HTMLB Dropdownlist not retaining the selected value
Hello,
In my BSP application , in my Dropdownlist when i select an entry it doesnt get retained in the view.
Please suggest
I have implemeted DO_HANDLE_DATA AND DO HANDLEEVENT>
but still it doesnt retain the selected values.
Please help
thanks
swatiHi Swathi,
2things are important here:
1st : check in debugging where the dropdown event is getting triggered or not...
if yes then check whether you have taken the variable as a Global
2nd: your code should be after Dispatch_input()
hope this will help you out... still you face a problem let me know.
Cheers,
bhavana -
[WPF] Show ComboBox or DatePicker according to the selected value in a combobox
Hi,
in my DataGrid:
1) in one column I have a ComboBox: item1, item2
2) in another column I would show a:
- a list if the user select item1 in the ComboBox
- a datepicker if the user select item2 in the Combobox
In XAML i have:
<!-- COLUMN 1 -->
<DataGridTemplateColumn Header="{StaticResource datagridScheduled}" SortMemberPath="Type.Description">
<DataGridTemplateColumn.CellTemplate >
<DataTemplate>
<TextBlock Name="dgScheduleType" Text="{Binding Type.Description, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" />
</DataTemplate>
</DataGridTemplateColumn.CellTemplate>
<DataGridTemplateColumn.CellEditingTemplate>
<DataTemplate>
<ComboBox Name="dgCmbTypeOfSchedule"
ItemsSource="{Binding Source={StaticResource DomainDataViewModel}, Path=SchedTypes}"
SelectedItem="{Binding Type, Mode=TwoWay}"
SelectedValue="{Binding Type.Description}"
DisplayMemberPath="Description"
SelectedValuePath="Description">
</ComboBox>
</DataTemplate>
</DataGridTemplateColumn.CellEditingTemplate>
</DataGridTemplateColumn>
<!-- COLUMN 2 -->
<DataGridTemplateColumn Header="{StaticResource datagridDay}">
<DataGridTemplateColumn.CellTemplate>
<DataTemplate>
<TextBlock Text="{Binding Day, Mode=TwoWay}" />
</DataTemplate>
</DataGridTemplateColumn.CellTemplate>
<DataGridTemplateColumn.CellEditingTemplate>
<DataTemplate>
<ComboBox Name="dgCmbDay" DataContext="{Binding}" SelectedItem="{Binding Day}">
<ComboBox.ItemsSource>
<MultiBinding Converter="{StaticResource DateNumNameConverter}" >
<MultiBinding.Bindings>
<Binding ElementName="dgPlan" Path="CurrentItem"/>
<Binding Source="{StaticResource AnalysisPlanViewModel}" Path="ListDayNameOfWeek"/>
<Binding Source="{StaticResource AnalysisPlanViewModel}" Path="ListDayNumOfMonth"/>
<Binding Path="Items"></Binding>
</MultiBinding.Bindings>
</MultiBinding>
</ComboBox.ItemsSource>
</ComboBox>
</DataTemplate>
</DataGridTemplateColumn.CellEditingTemplate>
</DataGridTemplateColumn>
In my Convert, I check the value select in dgCmbTypeOfSchedule and the convert returns one list or the other.
But, If I would that the convert returns a datepicker, it's possibile?
Thanks.Hello robertino_salemi,
It is a depended on the meaning of your "datepicker" and I know some articles which can be shared to you. Please check the following blog first to see how to convert datapicker value:
https://michaelmairegger.wordpress.com/2010/02/01/binding-null-value-of-datetime-to-datepicker/
And also the following place:
http://stackoverflow.com/questions/4542291/datepicker-selecteddate-not-changing-when-text-is-input
As you can see, we can use the following converter:
public object Convert(object value, Type targetType, object parameter, CultureInfo culture)
string strValue = System.Convert.ToString(value);
DateTime resultDateTime;
if (DateTime.TryParse(strValue, out resultDateTime))
return resultDateTime;
return value;
<Controls:DatePicker
Text="{Binding OrderDate,Mode=TwoWay,UpdateSourceTrigger=PropertyChanged}"
SelectedDate="{Binding RelativeSource={RelativeSource Self},Path=Text,
Converter={StaticResource DateConverter}}">
So if you want to convert datapicker date, I think it is OK. If you want to show or hide a datepicker, it is also OK. But what do you mean of "convert returns a datepicker", return a control?
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to hide/show a column in reports 10g according to the parameter value
Hi,
I want to hide a column in the report according to the parameter value, is it possible?
For example, there is a parameter called P_TYPE. I want to hide a column called 'BALANCE' if the P_TYPE=0.
This column is not the last one in the table, so if it is hide then that empty space should be occupied by next column.
Is it possible means please explain me how to do it?
Thanks in advance,
SANCreate a format trigger (for both the header and the column item) that returns False on you condition.
Set the horizontal elasticity to Contract (for both the header and the column item).
Sometimes Contract doesn't work. Try Variable in that case. This has the disadvantage that the field can also expand. -
How to get the selected values from a selectmanylistbox?
Hi ADF Experts,
<af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb2"
value="#{viewScope.TestBean.lovValue}"
autoSubmit="true" valuePassThru="true">
<f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
binding="#{viewScope.TestBean.selectedItems}"/>
</af:selectManyListbox>
<af:commandButton text="get selected values" id="cb3"
actionListener="#{viewScope.TestBean.getSelectedValues}"
partialSubmit="true"/>
private List<String> lovValue;
private List<SelectItem> actualList;
//getters and setters
public void getSelectedValues(ActionEvent actionEvent) {
// Add event code here...
for (String selectedItem : lovValue) {
System.out.println("Selected item: " +selectedItem.); // this is giving 1 and 3 like this. how to get the checked values as I'm getting only the indexes. In this scenario I am populating the list programmatically.Just I wanted to know how can we get the selected values(not indexes). Please suggest.
Thanks-
AbhijitHi Timo,
As I am sharing the page fragment and the Java class. So its my usecase I have mentioned below
I am sharing the jsff page fragment and java class. So that it wud be of help to others.
jsff page fragment
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:f="http://java.sun.com/jsf/core">
<af:panelGroupLayout id="pgl1">
<af:commandButton text="Search" id="cb1"
actionListener="#{viewScope.TestBean.searchSupplier}"/>
</af:panelGroupLayout>
<af:popup id="p1" binding="#{viewScope.TestBean.searchSupplierPopup}">
<af:dialog id="d2"
type="none">
<af:table value="#{bindings.Contacts.collectionModel}" var="row"
rows="#{bindings.Contacts.rangeSize}"
emptyText="#{bindings.Contacts.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.Contacts.rangeSize}"
rowBandingInterval="0"
binding="#{viewScope.TestBean.tsupportIssues}"
filterModel="#{bindings.ContactsQuery.queryDescriptor}"
queryListener="#{bindings.ContactsQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectionListener="#{bindings.Contacts.collectionModel.makeCurrent}"
rowSelection="multiple" id="t1">
<af:column sortProperty="name" filterable="true" sortable="true"
headerText="#{bindings.Contacts.hints.name.label}" id="c2">
<af:outputText value="#{row.name}" id="ot1"/>
</af:column>
<af:column sortProperty="email" filterable="true" sortable="true"
headerText="#{bindings.Contacts.hints.email.label}"
id="c1">
<af:outputText value="#{row.email}" id="ot2"/>
</af:column>
</af:table>
<af:commandButton text="OK" id="cb5" partialSubmit="true" actionListener="#{viewScope.TestBean.testMethod}"/>
<af:commandButton text="Cancel" id="cb6"
actionListener="#{viewScope.TestBean.cancelPopupSearch}"/>
</af:dialog>
</af:popup>
<af:selectManyListbox label="Label 1" id="sml1" partialTriggers="cb5"
value="#{viewScope.TestBean.lovValue}"
autoSubmit="true" valuePassThru="true"
binding="#{viewScope.TestBean.prp1}">
<f:selectItems value="#{viewScope.TestBean.actualList}" id="si1"
binding="#{viewScope.TestBean.selectedItems}"/>
</af:selectManyListbox>
<af:commandButton text="get selected values" id="cb3"
actionListener="#{viewScope.TestBean.getSelectedValues}"
partialSubmit="true"/>
<af:commandButton text="remove selected" id="cb4"
partialSubmit="true" actionListener="#{viewScope.TestBean.removeSelectedValues}"/>
</jsp:root>
TestBean.java
package com.demo.view;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import javax.faces.component.UISelectItems;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.component.rich.data.RichTable;
import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
import oracle.adf.view.rich.context.AdfFacesContext;
import oracle.adf.view.rich.event.DialogEvent;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import org.apache.myfaces.trinidad.model.RowKeySet;
public class TestBean {
private RichTable tsupportIssues;
private List<SelectItem> lovValue;
private List<SelectItem> actualList;
private RichSelectManyListbox prp1;
private List valuesChoosed = new ArrayList();
private UISelectItems selectedItems;
private RichPopup searchSupplierPopup;
public TestBean() {
super();
public void setTsupportIssues(RichTable tsupportIssues) {
this.tsupportIssues = tsupportIssues;
public RichTable getTsupportIssues() {
return tsupportIssues;
public void testMethod(ActionEvent actionEvent) {
// Add event code here...
// For learning purposes - show Select Many Button clicked
System.out.println("Select Many Button has been Clicked");
// // RowKeySet Object can hold the selected rows from a user as follows
RowKeySet rksSelectedRows = this.getTsupportIssues().getSelectedRowKeys();
// Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows
Iterator itrSelectedRows = rksSelectedRows.iterator();
// Get the data control that is bound to the table - e.g.
// OpenSupportItemsIterator
DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcIteratorBindings = bindings.findIteratorBinding("findAllContactsIterator");
// Information from binding that is specific to the rows
RowSetIterator rsiSelectedRows = dcIteratorBindings.getRowSetIterator();
// Loop through selected rows
int i=1;
while (itrSelectedRows.hasNext()) {
// Get key for selected row
Key key = (Key)((List)itrSelectedRows.next()).get(0);
// Use the key to get the data from the above binding that is related to the row
Row myRow = rsiSelectedRows.getRow(key);
// Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces
System.out.println(myRow.getAttribute("name"));
valuesChoosed.add(myRow.getAttribute("name"));
// actualList = new ArrayList<SelectItem>();
// String j = Integer.toString(i);
// actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
// i++;
searchSupplierPopup.hide();
AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setLovValue(List<SelectItem> lovValue) {
this.lovValue = lovValue;
public List<SelectItem> getLovValue() {
return lovValue;
public void setActualList(List<SelectItem> actualList) {
this.actualList = actualList;
public List<SelectItem> getActualList() {
actualList = new ArrayList<SelectItem>();
if(valuesChoosed.size()!=0){
for(int i=0;i<valuesChoosed.size();i++){
actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
else{
actualList.add(new SelectItem("1","Select One"));
return actualList;
public void setPrp1(RichSelectManyListbox prp1) {
this.prp1 = prp1;
public RichSelectManyListbox getPrp1() {
return prp1;
public void setValuesChoosed(List valuesChoosed) {
this.valuesChoosed = valuesChoosed;
public List getValuesChoosed() {
return valuesChoosed;
public void getValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<valuesChoosed.size();i++){
System.out.println(valuesChoosed.get(i));
public void getSelectedValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<this.getLovValue().size();i++){
System.out.println("Selected Value:"+this.getLovValue().get(i));
public void removeSelectedValues(ActionEvent actionEvent) {
// Add event code here...
public void setSelectedItems(UISelectItems selectedItems) {
this.selectedItems = selectedItems;
public UISelectItems getSelectedItems() {
return selectedItems;
public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
this.searchSupplierPopup = searchSupplierPopup;
public RichPopup getSearchSupplierPopup() {
return searchSupplierPopup;
public void cancelPopupSearch(ActionEvent actionEvent) {
// Add event code here...
searchSupplierPopup.hide();
public void searchSupplier(ActionEvent actionEvent) {
// Add event code here...
RichPopup.PopupHints hints = new RichPopup.PopupHints();
searchSupplierPopup.show(hints);
package com.demo.view;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
import javax.faces.component.UISelectItems;
import javax.faces.event.ActionEvent;
import javax.faces.model.SelectItem;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.component.rich.data.RichTable;
import oracle.adf.view.rich.component.rich.input.RichSelectManyListbox;
import oracle.adf.view.rich.context.AdfFacesContext;
import oracle.adf.view.rich.event.DialogEvent;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import org.apache.myfaces.trinidad.model.RowKeySet;
public class TestBean {
private RichTable tsupportIssues;
private List<SelectItem> lovValue;
private List<SelectItem> actualList;
private RichSelectManyListbox prp1;
private List valuesChoosed = new ArrayList();
private UISelectItems selectedItems;
private RichPopup searchSupplierPopup;
public TestBean() {
super();
public void setTsupportIssues(RichTable tsupportIssues) {
this.tsupportIssues = tsupportIssues;
public RichTable getTsupportIssues() {
return tsupportIssues;
public void testMethod(ActionEvent actionEvent) {
// Add event code here...
// For learning purposes - show Select Many Button clicked
System.out.println("Select Many Button has been Clicked");
// // RowKeySet Object can hold the selected rows from a user as follows
RowKeySet rksSelectedRows = this.getTsupportIssues().getSelectedRowKeys();
// Iterator object provides the ability to use hasNext(), next() and remove() against the selected rows
Iterator itrSelectedRows = rksSelectedRows.iterator();
// Get the data control that is bound to the table - e.g.
// OpenSupportItemsIterator
DCBindingContainer bindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcIteratorBindings = bindings.findIteratorBinding("findAllContactsIterator");
// Information from binding that is specific to the rows
RowSetIterator rsiSelectedRows = dcIteratorBindings.getRowSetIterator();
// Loop through selected rows
int i=1;
while (itrSelectedRows.hasNext()) {
// Get key for selected row
Key key = (Key)((List)itrSelectedRows.next()).get(0);
// Use the key to get the data from the above binding that is related to the row
Row myRow = rsiSelectedRows.getRow(key);
// Display attribute of row in console output - would generally be bound to a UI component like a Label and or used to call another proces
System.out.println(myRow.getAttribute("name"));
valuesChoosed.add(myRow.getAttribute("name"));
// actualList = new ArrayList<SelectItem>();
// String j = Integer.toString(i);
// actualList.add(new SelectItem(j, (String)myRow.getAttribute("name")));
// i++;
searchSupplierPopup.hide();
AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setLovValue(List<SelectItem> lovValue) {
this.lovValue = lovValue;
public List<SelectItem> getLovValue() {
return lovValue;
public void setActualList(List<SelectItem> actualList) {
this.actualList = actualList;
public List<SelectItem> getActualList() {
actualList = new ArrayList<SelectItem>();
if(valuesChoosed.size()!=0){
for(int i=0;i<valuesChoosed.size();i++){
actualList.add(new SelectItem(valuesChoosed.get(i), (String)valuesChoosed.get(i)));
else{
actualList.add(new SelectItem("1","Select One"));
return actualList;
public void setPrp1(RichSelectManyListbox prp1) {
this.prp1 = prp1;
public RichSelectManyListbox getPrp1() {
return prp1;
public void setValuesChoosed(List valuesChoosed) {
this.valuesChoosed = valuesChoosed;
public List getValuesChoosed() {
return valuesChoosed;
public void getValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<valuesChoosed.size();i++){
System.out.println(valuesChoosed.get(i));
public void getSelectedValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<this.getLovValue().size();i++){
System.out.println("Selected Value:"+this.getLovValue().get(i));
public void removeSelectedValues(ActionEvent actionEvent) {
// Add event code here...
for(int i=0;i<this.getLovValue().size();i++){
System.out.println("Selected Value:"+this.getLovValue().get(i));
System.out.println(this.getLovValue().remove(i));
AdfFacesContext.getCurrentInstance().addPartialTarget(prp1);
public void setSelectedItems(UISelectItems selectedItems) {
this.selectedItems = selectedItems;
public UISelectItems getSelectedItems() {
return selectedItems;
public void setSearchSupplierPopup(RichPopup searchSupplierPopup) {
this.searchSupplierPopup = searchSupplierPopup;
public RichPopup getSearchSupplierPopup() {
return searchSupplierPopup;
public void cancelPopupSearch(ActionEvent actionEvent) {
// Add event code here...
searchSupplierPopup.hide();
public void searchSupplier(ActionEvent actionEvent) {
// Add event code here...
RichPopup.PopupHints hints = new RichPopup.PopupHints();
searchSupplierPopup.show(hints);
Thanks,
A. Abhijit -
Hi all,
I am making a vi where I have to save the selected value from listbox with its respective tab control dropdown selcted values in another listbox.Whenever I select Item1 then the heading change and respective tab will open for that item.But Now I just want to save the selection and put it in another ListBox.SO that I can renmove or add according to my wish. Plz help me.
Solved!
Go to Solution.
Attachments:
my_vi.png 83 KBHi, I successfully make the vi to insert itmes from listbox1 to listbox2.Whenever I select itmes 1 in listbox 1 it display same elected item in listbox2 , but it not appending the items in listbox2.Like If 1 is selected in listbox1 then 1 will display , next time after saving when I selct next item like 3 then in listbox 2, 1 is replaced by 3,it dont come in second row of listbox2.Hope I am able to explain.\
Plz help me to resolve this.
Attachments:
listbox_update.vi 11 KB -
Is there a way to hide some reports based on the selected values in prompt.
Hi Experts,
Is there a way to hide some reports based on the selected values in prompt.
For ex. if a year is selected in the prompt then the report should display year wise report.
If a year and half year both are selected in the drop down from prompt section then 2 reports should come.. One for year wise and another for half year wise.Kindly look into this.
Regards
AshishHi,
Use presentation values in prompts for year,half,qtr and month.Example- For year-y is presentation variable in the same way for halfyear-h,qtr-q and month-m.
create four intermediate reports.Example-Report r1 with only year column,r2 with only halfyear column,r3 with qtr column and r4 with month column.
Make column in each report(r1,r2,r3,r4) is equal to their presentation variables(y,h,q,m).
Use four sections.
Section1-Place report that should come when only year.
section2-Place report that should come for year and halfyear.
Section3-Place report that should come for year,halfyear and qtr.
Section4-Place report that should come for year,halfyear,qtr and month.
Apply guided navigation for each section selecting guided navigation-
For section1-
properties->Guided navigation->check this Reference Source Request(Yes)->select report r1(year)->check this Show Section(if request returns row)
In the same way do for remaining section2(select r2),section3(select r3) and section4(select r4)
Thanks,
Srikanth
http://bintelligencegroup.wordpress.com/ -
I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons.
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj WeirThank you. I'll try that approach.
I found, after much experimentation, on a similar problem involving a multiselect lookup field, that if I make the field invisible, and add a textbox that displays the fieldname plus .column(0), it displays all the selected entries.
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members.
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir
-
How can I show a 0% range in the data value label on a bar chart thanks?
How can I show a 0% range in the data value label on a bar chart thanks?
I'm not sure what the question is.
I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%. The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %. This will get you a thin line on the chart.
But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label. -
How do I read the selected value of a comboBox?
I need to send the selected value of a comboBox in an HTTPService request. How do I read the selected value (not label or item or index) from the comboBox?
> (not label or item or index)
I suspect 'item' is what you need actually. Specifically the 'selectedItem' property which returns the whole of the selected object from your dataprovider. From that you can then extract the selected object's properties.
e.g. selectedValue = myComboBox.selectedItem.value;
The example in tour-de-flex shows this - note: 'data' in that example is i think what you call 'value'.
http://tourdeflex.adobe.com/flex4.0/ComboBox/sample.html (right-click to view source)
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/spark/components/suppor tClasses/ListBase.html#selectedItem
hth
Paul Evans
http://www.creative-cognition.co.uk/
http://blog.creacog.co.uk/ -
Unable to set the selected value for a ADF LOV
Hi,
I am developing an application using jdeveloper 10.1.3 and Struts.
I have created a ADF LOV on my JSP Page as given below:
<html:select property="lob" onchange="javascript:selectLOB(this.form)">
<html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
</html:select>
When i submit the form, i am able to get the value of the selected Value in the List.
JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
Row r = (Row) listBinding.getSelectedValue();
String SoLob = (String) r.getAttribute("LobLob");
But i am unable to set the selected value back in the list when i return to the form again.
I tried the following:
int x = listBinding.getSelectedIndex();
listBinding.setSelectedIndex(x);
It would be really helpful if some one could let me know what needs to be done.
Thanks,
SubashiniGyan,
I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
"Rendered" on the field so that based on search parameters we can hide result table column.
After searching online, I modified the controller code as follows
1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
3. Modified the controller code as follows :
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
OADBTransaction txn = am.getOADBTransaction();
if (testvo != null)
OARow row = (OARow)testvo.first();
if (a.equalsIgnoreCase("Approved"))
row.setAttribute("Testrender", Boolean.FALSE);
else
row.setAttribute("Testrender", Boolean.TRUE);
} But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
Its using only the value of one search parameter but not the second one .
The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
So can you please let me know how to proceed from here ? -
How to capture the selected values from module pool dialog list box !
Hi experts,
Can anyone help me out in capturing the values from the list box.
i am able to set the values in the list box.But i am not able to capture the selected value from the list box. Always the list box name is getting as "space"
I also tried in using the FM "VRM_GET_VALUES" but it is retireving all the values. Is there is any flag for filttering out the selected value.
Your inputs are appreciated.
Thanks,
Vijay.Along with the PBO and PAI event, add a POV event in the flow logic of the screen
DEMO_DROPDOWN_LIST_BOX -is a good demo example.
PROCESS ON VALUE-REQUEST.
FIELD structure_name-field_name MODULE create_dropdown_box.
In the report :
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
FROM scarr
INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'CARRID'
value_org = 'S'
TABLES
value_tab = itab_carrid
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
In the layout, assign a Function Code , for eg : 'SELECTED' to the listbox and lets say name of the field is SDYN_CONN-CARRID. So in the PAI module,
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'SELECTED'.
MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
sdyb_conn-carrid will contain your selected field -
Need to get the selected values from the selectManyShuttle
Hi,
I am using ADF11g newer version.
I have a selectManyShuttle and a command button. Need to insert all the selected values on the right hand side of the selectManyShuttle into a database table.
I created the selectManyShuttle with the values. Need help in getting the values on the right hand side.
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
Any sample code or link is really appreicated.
ThanksThanks for the reply.
I am using a View Object and I dropped it as SelectManyShuttle
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2"
valueChangeListener="#{POBacking.getSelectedValues}"
valuePassThru="true"
autoSubmit="true">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
public void getSelectedValues(ValueChangeEvent valueChangeEvent) {
System.out.println("Testing Shuttle");
ArrayList list = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
String val = "";
String sqlStmt = "";
try {
if (list != null) {
for (int i = 0; i < list.size(); i++) {
int l = list.size() - 1;
val = list.get(l).toString(); //returns , delimited string
System.out.println(" value:" + val);
if (val != null) {
val = val.replaceAll("[\\[\\]]", ""); //remove []
StringTokenizer st = new StringTokenizer(val, ",");
int nto = st.countTokens();
for (int j = 0; j < nto; j++) {
String users = st.nextToken().trim();
System.out.println("Users:" + users);
//sqlStmt = " update xxpp_project_clip set clip_status='true', clip_seq = "+j * 10+
// " where project_id = "+rHdr.getAttribute("ProjectId") +
// " and clip_name ='"+ clip_Name +"'";
//System.out.println("sqlStmt:" + sqlStmt);
//stmt.executeUpdate(sqlStmt);
//am.getDBTransaction().commit();
//if (stmt != null)
// stmt.close();
// am.getDBTransaction().commit();
} catch (Exception ex) {
ex.printStackTrace();
I don't see the values in the list.
I gets printed as
value:[Ljava.lang.Integer;@1b10691
Users:Ljava.lang.Integer;@1b10691
how to get the individual values in the list?
Thanks
Saru -
How to get the selected values from multiselected list
Hi,
I have a multiselect list displaying all the years from 2003 to 2008 (used dynamic LOV). The user can choose one or more years as per his needs, and then when user clicks on the link the selected values of the list are to be captured and a pop up page of a Discoveror report needs to be opened where these years get passed as a parameter. I tried several methods to capture the value, but either one or all are getting passed but not exactly what the user has chosen.
This is how it looks:
P2_FISCAL_YEAR is a multiselect list containing values from 2003,2004... 2008
If user chooses 2004 and 2007
then I want the url to capture these values and pass as parameters for my discoveror reports. as '&qp_fiscal_year=2004,2007'
Any help is appreciated!
Thanks in advance,
Sapna.Hi,
I have a multiselect list displaying all the years from 2003 to 2008 (used dynamic LOV). The user can choose one or more years as per his needs, and then when user clicks on the link the selected values of the list are to be captured and a pop up page of a Discoveror report needs to be opened where these years get passed as a parameter. I tried several methods to capture the value, but either one or all are getting passed but not exactly what the user has chosen.
This is how it looks:
P2_FISCAL_YEAR is a multiselect list containing values from 2003,2004... 2008
If user chooses 2004 and 2007
then I want the url to capture these values and pass as parameters for my discoveror reports. as '&qp_fiscal_year=2004,2007'
Any help is appreciated!
Thanks in advance,
Sapna. -
Unable to get the selection value of OAMessageChoiceBean
Hi,
From our 11i to R12 upgrade, in Customer Advance Search page, we are unable to get the proper handle for OAMessageChoiceBean (in extendedCO).
The code snippet for handling the bean is as follows:
OAMessageChoiceBean PartyStatusFilter = (OAMessageChoiceBean)vOAPageContext.getRootWebBean().findChildRecursive("xxfeF426PartySearchStatus");
String xxTest= PartyStatusFilter.getSelectionValue(vOAPageContext);
The value for above xxTest (in R12 env.) is coming as null. Whereas, the same code is working in 11i enviroment and the output of xxTest="A".
Hence, we are unable to get the selection value of the messagechoicebean in our R12 environment. Moreover, I've already looked into similar previous posts of this forum, also tried using getSelectionText(vOAPageContext) or getSelectedValue(), but it didn’t worked too.
Any pointers please?
Many Thanks,
ZahidHi Keerthi,
I'm still unable to get the value using your provided code. The referenced snippet I used is as follows:
String messageChoiceValue = null;
vOAPageContext.writeDiagnostics(s, "Before the IF LOOP", 2);
if(vOAPageContext.getParameter("xxfeF426PartySearchStatus")!= null ) {
vOAPageContext.writeDiagnostics(s, "Inside the IF LOOP ", 2);
messageChoiceValue = vOAPageContext.getParameter("MessageChoiceID");
vOAPageContext.writeDiagnostics(s, "Value of MessageChoice... "+messageChoiceValue, 2);
if( messageChoiceValue != null ) {
l++;
saveFilterRow(SSLineVO, HeaderId, new oracle.jbo.domain.Number(l), "C", "Status", messageChoiceValue);
vOAPageContext.writeDiagnostics(s, "After the IF LOOP", 2);
The resultant output is as follows:
"Before the IF LOOP", "After the IF LOOP"
It doesn't goes inside the IF condition as the valuie is null. Any other alternative?
Regards,
Zahid
Maybe you are looking for
-
The sizes on the print template do not relate to the size I get in the cell size or on the photo. Template 8x10 gives me 3.5 x5.194 which is on the cell size can't make it any larger. 4X6 template gives me 3.5x4 which is the same as the cell size. M
-
I need help with a solution. I need to use older Adobe Software (LiveMotion) Unfortunately, it does not work with OS X beyond 10.3. I want to use the new OS X on my G5. I want to use one of my older Macs, I have a G4 and a G3, (would prefer to use G3
-
CAN'T JUMP TO LATEST VERSION OF FIREFOX FROM THUNDERBIRD.
WHEN I INSTALLED THE LATEST VERSION OF FIREFOX LAST WEEK, I LOST THE FUNCTION OF BEING ABLE TO JUMP TO FIREFOX FROM THUNDERBIRD WHEN THERE IS A WEB PAGE LINK INSERTED IN AN EMAIL. I TRUST THAT THAT PROBLEM WILL BE FIXED SOON. I AM RUNNING WINDOWS 7 P
-
How to manage Folder names in different languages
In our project we are implementing IMAP protocol and using Exchange server. When an account created in Exchange, many default folders are created. We need some of them for example Outbox,Sent Items,Drafts... But these folder names are language depend
-
Hello; How to separated the logs of a proftd server on several files in using the configuration file proftpd.conf : The errors will be recorded into a error file : error.log the transfer in another file : transfert.log etc... Thank you