Show document flow (original and reversal document) in MIGO

Hi,
Scenario
- (MIGO) Create material document Mtype 201 (document 1)
- (MIGO_ Ceate reversal document Mtype 202 (document 2)
Questions
-How to find what document 1 was reverced
-How to see which document is reversed by document 2
This relationsheep is stored in MSEG, but is not shown in MIGO... or I can not find it.
Thank you!
Andrey Garshin.

MIGO is a transaction code.
When you choose display - material document number, It will fetch all details from MKPF and MSEG table.
You reverse material document number is saved in table MSEG,
Your question :
-How to find what document 1 was reversed
-How to see which document is reversed by document 2
Answer 1. Go to MSEG table, give the document 1 in field SMBLN.
Then Click execute.. If you find any entry, then the material document number reversed.
You can find the reversed document number in field MBLNR.
Answer 2. Select "Cancellation - Material Document" in MIGO, then enter the material document number 1. Then press execute.
After pressing execute, you will see the message.
That means this document is reversed..
Regards
Dev

Similar Messages

Identifying the orginal Doc for reset and reverse documents

hi,
When there is a cheque return from the customer, what is the practice is to reset and reverse the original receipt posted in the system. but the issue is once the original document is reset and reverse there is no way of identifying the invoice details of the receipt created (f-28). Please some one help to find out those details.
Thanks and Regards
Gayani

HI,
Up to that point ok, say If i reverse the receipt and from the reversal document number I can see the "reversed with number" but the issue is I want to know the payment usage (original documents) of the "revered with number".
Say There is receipt document number 1800000000
and the bank return this cheque, so I want to reverse the receipt number 18000000, so I use the transaction FBRA to reset and reverse the document. but the customer want to know the original documents (invoice) of the receipt number 180000000?
I can not get those information from the system
Gayani

Work flow configuration and user document

my client wants work flow configuration for parking of documents -anybody is having configuration and user document-
please send to my mailid:[email protected]
thanks in advance

my client wants work flow configuration for parking of documents -anybody is having configuration and user document-
please send to my mailid:[email protected]
thanks in advance

What is a Reclass Document? What is Reversal Document? Difference's

Hello Guru's
1.What is a Reclass Document? How do the Credit and Debit Side work with Example ?
2. What is Reversal Document ? How do the Credit and Debit Side work with Example ?
3. When does one use either 1 or 2 ?
4. Please finish the flow logical mapping (P&L GL Account(mapped to) ->Cost Element(mapped to)-> Cost Center or Profit Center or WBS Element or Work Center) or (P&L GL Account(mapped to) ->Cost Element(mapped to)-> Cost Center (mapped to)->Profit Center)
Please fill in the Tcodes if possible.
I am a BI Consultant please be as specific as possible with out missing small details
Thanks,
Points to be alloted.

Any movie openable in QuickTime.
(72142)

Reset And Reverse Document?

For Cleared Item generally We Reset First With T Code FBRA and then We Reverse With T code FB08.
So we used two steps, So my Question is
Can I Reverse Cleared Item In One Step?( Using Only One T Code?)

Dear expert
in FBRA itself there is an option to reset & reverse that particular document
Regards
Ajeesh.s

FI BAPI in order to unclear and reverse document

Hi all,
Do you know if there is a BAPI or function modul to unclear FI document or do we use call transaction?
I a saw the function modul FM_REVERSE_CLEARING but nothing inside this one....
The same question for reversing a FI document.
Thanks for your help!
David

Hi David
you can check these functions (and related POSTING_INTERFACE_START / POSTING_INTERFACE_END) :
POSTING_INTERFACE_RESET_CLEAR
POSTING_INTERFACE_REVERSE_DOC
But i think it's more immediately a batch input on Transaction FBRA

In Finder in Documents i want to show the folders first and individual documents second and it is the other way at the moment. Cant seem to see where i would change this

In Finder in Documents i want to have the folders show first and the individual documents second. At the moment it is the other way and i can't seem to find how to change it
[email protected]

Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

No link / reference document / between FI and JV documents

Hi,
I am uploading bank statements using transaction ff_5.
After upload all postings are done, but for some documents there is no 'link' / reference document / . I've checked table JVSO1 and the field reference number is blank.
Can you give an idea what could be the problem ?
Thanks,
Stefan
Edited by: Stefan Kolev on Nov 28, 2011 5:45 PM

Hi Ricky,
BSEG-BELNR = COBK-REFBN
Regards,
Santosh

How to check document flow table of a document

Hi,
There is existing report and additional data needs to be added to existing report.
Its SD.
It is required that i display a field only when FI document is created.
i.e :
of Claims Paid : If FI document is created for a claim.
So, for this i need to know how to check whether a FI document has been created or not. As i don't even know the order number.
Is there any way to find this??
Please help me on this!!
thanks

Hi,
Rashi here is the Link for VBFA to BSEG
VBFA-VBELN here VBELN is primary key
BSEG-VBELn here VBELN is foreign key.
So proceed.
Hope my answer helps you.
Cheers!!

Reversed documents are not cleared

Hello there
I am dealing with support to customer who has following issue (among others..):
- the settings are made so that standard SAP reversing procedure is messed up! Namely, when the user reverse FI document the SAP creates new one (reversal document) but the original and reverse documents are not cleared against each other! It is also very hard to find out the connection between these two documents.
I have no idea where to look to check why this is happening.
I checked the reversal reasons, and all are set to 'negative postings', but I do not believe this is just because of that!
They have SAP ECC 5.0 version KERNEL 640
Best regards,
Amina
Edited by: Amina Bisic on Feb 28, 2008 9:39 AM

Hi
When any transaction is cleared with another transaction either it may be customer or vendors, the first line item will become closed status.
When you want to reverse the transaction you have to reset and reverse the transaction.
I mean when you reset it becomes open item then you can reverse the transaction.
Otherwise in your case it is only creating a seperate lieme item
Thx

Resetting and reversing a cleared document

Hello
I want to reset and reverse a customer clearing document. The clearing document which is 54203512 was posted and matched against the customer invoice in the previous period. When reversing and resetting the document in transaction code FBRA, a pop up screen u201CReversal Datau201D appears. The reversal reason is specified as 01 (Reversal for incorrect posting), posting date is todayu2019s date however the original clearing document 54203512 was posted in 05.09.2008 and in previous period. Click on continue.
The document is not reset and reversed and I am getting the error message u201CReversal reason 01 only permits posting date 05.09.2008u201D. Not sure why the document is looking at the posting date of original document even though I specified the reversal date as 08.10.2008. Can a document be reset and reversed in different periods?? Or does this cause any issues or problems? Or is this a bug??
Thanks in advance
Evelyn

Hi,
There are only 2 controls allowed for Reversal reasons:
1. Negative posting
2. Alternative date for posting
The symptom you have mentioned would be of a control from somewhere else, i.e. either a user exit or a validation. An order reason can only restrict it to current date or allow any other date. At least that is what I have experienced.
Cheers...

How to get a Reversal document number from Original Document Number ?

Hi,
Say I have a Original Document number. This document has been reversed.
I am using table BSEG. Original Document Number for any Reversal Document is stored in field "BSEG-REBZG"
My query is that now I have the Original Document Number. How can I get the Reversal Document from this Original Document number ??
OR in simple words, Is there any possible way to find out if my original document has been reversed ?
I need help to write a select query i.e the tables and fields.
Please help.
Thanks.

Hello,
Check the fields:
BKPF-XREVERSAL: Reversal Indicator (1: Reversed Document, 2: Reversal Document)
BKPF-STBLG: Reverse Document Number.
BR,
Suhas

View CRM transaction in ECC through document flow

Hi ,
we have a requirement where we need to show a CRM document in document flow of another document in ECC. There is no replication for these documents. I also need to display the CRM document in ECC when it is selected from document flow.
Can any one please help on this?
Regards,
Sharf.

This is all going to be custom development but here is the idea:
In theory, you can read the docflow of the CRM parent document (which is in ECC) by an RFC into CRM and get the subsequent documents. The major assumption I am making here is simple: the docflow is established between the parent and the child in CRM.
Once you have the docflow, you can show the document numbers in the R/3 and again access the individual documents and show relevant header and item details of the "CRM" docment in the ECC screen.
FYI, an exactly "reverse" feature is available in CRM Web Channel (E-Commerce application). Here, you can see the Invoice details in the web, even though the billing documents are never replicated from ECC. We even see the document flow about the Shipping documents (Deliveries).
Easwar Ram
http://www.parxlns.com

View CRM document in ECC through document flow

Hi ,
we have a requirement where we need to show a CRM document in document flow of another document in ECC. There is no replication for these documents. I also need to display the CRM document in ECC when it is selected from document flow.
Can any one please help on this?
Regards,
Sharf.

This is all going to be custom development but here is the idea:
In theory, you can read the docflow of the CRM parent document (which is in ECC) by an RFC into CRM and get the subsequent documents. The major assumption I am making here is simple: the docflow is established between the parent and the child in CRM.
Once you have the docflow, you can show the document numbers in the R/3 and again access the individual documents and show relevant header and item details of the "CRM" docment in the ECC screen.
FYI, an exactly "reverse" feature is available in CRM Web Channel (E-Commerce application). Here, you can see the Invoice details in the web, even though the billing documents are never replicated from ECC. We even see the document flow about the Shipping documents (Deliveries).
Easwar Ram
http://www.parxlns.com

Reversing a reversal document.

Hi gurus,
I've reversed a GR/IR clearing document and it cretaed a reversal document.now if i want to rverse the reversal document to bring the reversal document back into affect.Is it possible to do it.(or) Is it to be done maually.I am new to this kind of stuff . if it is manual adjustment what are the steps that are to be done .
Can someone please help me how to do this .I'd appreciate your help.
Thanks
Chris T

Hi
One another thing which I am suspecting. Are you trying to cancel the original document once again? To explain it better
Say your initial document # 123
Then you cancel this document which gives another reference doc say # 456
In this case, you would now be trying to cancel document # 456.
Hope you are following the correct steps as narrated above. Just for confirmation, you may verify the same.
Cheers
Jagadeesh

Show document flow (original and reversal document) in MIGO

Similar Messages

Maybe you are looking for