Show error door open

sir, my printer hp laserjet 1536dnf mfp ,show error "door open" pl advise

Welcome to the HP Forums gojiya,
I see by your post that you are getting a error that the door is open.
I can help you with this issue.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 30-60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
What happened before receiving the error? (paper jam, replacing the toner)
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Deskjet D1360 error: Door Open SOLVED

Been using this Deskjet printer for over 3 years. never seen this error: "Door Open." "Cover Open" is a common message when the cover is opened to access the cartridges, but where is the door on a Deskjet 1300 series? Where is the sensor that triggers this message? Nothing will print when this message Door Open appears. Tried turning the printer on and off. Tried rebooting the notebook computer on and off. Tried re-inserting the cartridges and paper. Have not tried re-installing the printer drivers. What to do?
Solved: Door Open is the same as Cover Open in deeper layers of the Printer Software. There is only one cover with a sensor on this printer.
Solved: By reinstalling the printer software, the Door Open error message disappeared and the blockage to printing stopped, allowing normal printing to proceed.

The only thing I can think of is the rear access door? Try the steps in this document:
Product Stops Printing
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

PDF file to be attached in mail .Showing error in opening the Document .

Hi ABAP Gurus ,
Good Morning !
I converted a smartform to PDF and sended to function SO_NEW_DOCUMENT_ATT_SEND_API1 to send a mail external...
So, when I tried to open the file attachment, I can't open this file. and I watch a message : 'There was a error in opening the document . The file is damaged and could not be repaired '.
In one of the earlier threds on www. sdn.sap.com i found a solustion which says to use class CL_BCS but I don't know how to use this class or rather use classes in ABAP Programs .
I would be thankful if I am provided the sample code or some help regarding this issue .
I think if somebody provides a solution on how to use function SO_NEW_DOCUMENT_ATT_SEND_API1 that would make me Relieved .
Regards,
D Singh

Thanks Mr. Shehryar Shabbir & Mr. Vijay .
SDN is not allowing to send email id .Plz share the code in SDN.COM .
Regards ,
D Singh

My pages is showing error while opening a document in microsoft word format. Please help

While trying to open documents in microsoft word format, pages is showing an error. It is unable to complete the task and is requesting me to reopen pages but then no response. However I am able to work on pages format. Please help.
thanks

When you open a Word document in Pages, it is translated into the internal .pages document format — and you are no longer working in the original Word document format. This translation also occurs in reverse when exporting a document back to Word. When you open a Word document in Pages, if it has issues with the translation (missing font characteristics, other issues), it will open a warning dialog box and display these issues for you.
If however, you prefer to always work in the native Word document format, and not risk translation issues, then you should be using MS Word in Office for Mac 2011 with the latest update.

NIMax shows error when opening device and interface

I have just installed NI-VISA 3.1. NIMax will not open the devices and interfaces configuration to allow me to see the GPIB and PXI devices.
It gives a message of "NIMax.exe has generated errors and will be closed by Windows. You will need to restart the program."

Hello,
It sounds like an installation has been corrupted. As a general, first-order fix for such problems, you can uninstall and reinstall the program with corrupted files (using add/remove programs from your control panel). To get a better idea for which program has corrupted files, when MAX crashes click the details button (if one shows) in the error message (include such information in any repost as well!). If your system was stable prior to installing NI-VISA 3.1, you can try uninstalling and reinstalling NI-VISA. If you have the time, I would uninstall all of your NI hardware and software, then reinstall your NI software, then reinstall your NI hardware (you should check your hardware manuals to be sure that your specific NI hardware does not require instal
lation before the software). Also, if you could provide the version information for all of your NI software and your current hardware setup (NI and otherwise), it may open other options for solutions!
Thank you,
Best Regards,
JLS
Applications Engineer
National Instruments
Best,
JLS
Sixclear

CC show error /cannot open pdf created by cs5

Dears,
I just bought a new CC to replace cs5. However, when I try to open the pdf file created by CS5. CC stopped and said it is error. Any people can help? Million thanks!
Joy

Joy,
Why open the PDF? The AI is better.
What happens if you create a new document in CC, then tick Paste Remembers Layers in the Layers palette, then File>Place the CS5 document (and untick Paste Remembers layers afterwards)?
I presume you are (still) saving to/opening from your own harddisk, and copying to/from external whatever. If not, what if you do?

Error while opening illustrator file : The illustration contains an illegal operand.

Few of the production machine at our office is showing error while opening some of the illustrator project files which were working fine a day before.
If the Executive continues to open the document after this error all the work is lost and it becomes blank document.
Has some one been through this issue and suggest any solution.
System Configuration
Mac OS 10.9.3
Intel CPU Core 2 Duo 3.0 Ghz
8 Gb Ram
%00 Gb HDD

sanket karalkar,
One thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way.
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself, in addition to the ones you mentioned:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html

Error " ulimit: open files: cannot modify limit: Invalid argument" when open a terminal window

Every time I open a terminal (bash), it shows error " ulimit: open files: cannot modify limit: Invalid argument". I googled it but did not find the solution that works. My OS is 10.8.2. I followed the instruction here http://wordpress.org/support/topic/upgraded-to-php-530-on-mac-now-no-database-co nnection but it doesn't work.(basically, I just commented some lines in that file). Can anyone help?

Back up all data.
Select
Shell ▹ New Command
from the Terminal menu bar. Copy and paste the following line into the text box that opens:
mkdir disabled_shell_files; mv .profile .bash* $_
Your old shell initialization and history files will be saved in a directory with the indicated name at the top level of your home directory. Test.

ActionScript 2 need to show graphic when doors open

I had this working at one time but having a problem with
adding a graphic display when the door starts to open. A button
initiates the door to open, here is the script. the second part is
where it fails, anyone help please. Can send fla if needed
on (release) {
tellTarget ("/doors") {
play();
// function to show graphic when door opens
on (release) {
tellTarget ("/girlsroommovie") {
play();

It is asking to set any error code. But I am not sure what error code returns if both Jboss servers are down.
But URL returns 'Gateway Timed Out' when hitted during jboss down.
Could you guide me in this situation with which code should I map this?
Thanks in advance for sharing the link for 'error handling'.
Regards
--Amit.

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

HT201210 my iphone 3gs is showing errors wen i turn on debug and some apps will open and then close.

my iphone 3gs is showing errore wen i turn on debug and some apps will open and then close

There's an apple store in my city but it is about a 20 minute drive and I do not have apple care. Do you think they would still help me?

J6480 Ink Cartridge Door Hinges Broke. Door Open error message won't let me print. What can I do?

Have always been very careful with cartridge & scanner doors. Pressing OK doesn't remove error message. Broken hinges will no longer go down, so Door Open message won't go away and preventing printing.

The problem is the spring tension used to hold the cover open is stronger than the poorly designed weak hinges.
The way I solved it was to break both the hinges, (pretty easy to do just open and close the cover a few times), lift the cover up being carefull not to break the ribbon cable (wires) from the cover to the base. Then I pryed out the lower spring plates, these are located in the hinge assembly of the printer and removed the black plastic plunger and the large springs below it from both hinges. The cover wil now stay closed and allow you to print. You just have to be careful when changing the print cartridges as the cover can open too far now and possibly break the wires going to the top cover.
Happy Printing

HP 1410 All in One Door Open Error

A friend gave me his HP 1410 All in One printer a while back, so I installed all the drivers to my Windows 7 Home Premiuim Sony Laptop. The Scanner works just fine, but when I attempt to print a document, files pile up in the queue with an error to the side, Door Open. I've closed the door, but still get this error. When I open it, the ink container centers, and when I close it, it goes back to one side of the printer, but the error remains. I've restarted the printer but the error remains. Is it a broken part, or is there a way to bypass the door check?

your door interlock is not makeing contac.chack the front door to see if it is lineing up whit the covers or see ifyou brook aneything inside the front cover whear you added toner.the interlock is in the front door of the michane also you can make sure all of the other doors is closed
tecnical support for hp printing

When i try to open itunes its showing error 7 code 193

when i try to open itunes its showing error 7 code 193. it wont let me open it at all. i dont want to lose my music. i did the repair option already and it did not work.

That article has been withdrawn.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

1200 all in one wont print due to door open error message wont clear

how do i clear an error message when there is no error

Hi @1handcrafter,
Welcome to the HP Forums!
I see that you are getting the Door Open error with your HP Photosmart c7180, and I am happy to help you!
I am glad that you are able to do a test page on the printer itself, so we know it isn't something hardware related. What I would recommend is to try the HP Print and Scan Doctor, and let me know what happens! Then we will go from there.
Hope this works, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Show error door open

Similar Messages

Maybe you are looking for