Show field mara-MFRPN in the MP02 without double click

Hi all,
Anyone know how to show field mara-MFRPN in MP02?
I know that once we enter the internal material, it will show a list of MPNs, but in order to view the vendor manufacturer part number, we need to double click on each of it. How can we view mara-mfrpn in the same screen, means on the 1st screen instead of double click?
Thanks!

Hi,
Check ur pf-status. in that did u give PICK to the functionkey F2 which will enable the db click facility.
apart from setting the PF-status with PICK (F2) also set the property "respond to double click" for the tablecontrol column in screen painter.
and u can get the values of the clicked field by GET CURSOR command.
Also you can refer:-
double click from table control?
Doubleclick in Table control
Hope this helps you.
Regards,
Tarun

Similar Messages

HT1473 when ever i am about to add the file i double click on it and the the box with the documents disapears (windows 7)

when ever i am about to add the file i double click on it and the box just dissapears does anyone else have this issue? please help me if you did!

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Links open up without double clicking on them

This has been happening as of a few weeks ago: I hover the cursor over a link
without double clicking on it and it opens up automatically. I thought this was a
trackpad issue, but can not find the answer to it. I was wondering if under the
track pad needs cleaning, or those particular links are "made to open" just by
hovering over them without double clicking. Please advise.

Hi ..
From your Safari menu bar click Safari > Empty Cache
Back to the menu bar click Safari > Reset Safari
Select the following:
Remove all website data
and Clear History
Click Reset.
Then quit and relaunch Safari to test.

Bridge Does Not Automatically Bring Up Photoshop When the Photo is Double-Clicked

I have just purchased CS4 with Bridge for my new MacIntosh. In Bridge for the PC, when I double click a photo it automatically brings up Photoshop. On the Mac version, it gives me an error message saying that part of the application is not loaded. I completely uninstalled the program, and reloaded the application and still get the same message. So in Bridge on the Mac, to get around this, I right click the picture and go to "Open With" and there are two entries: "Open with CS4 (default)" and "Open with CS4." This works if I pick either option. My Windows version only has "Open with CS4 (default)" as the option.
I called Adobe support (in India?) with no solution.
I really like the double click option rather that using the pop-out menu choice. What is wrong with the Mac install, and how can I fix this issue?

Thank you for your help. I updated the software and it "healed" itself.
Best regards,
Gregory T. Stramat
[email protected]
801-978-4735 (Office - Preferred)
801-652-0775 (Mobile)
Omke Oudeman <[email protected]>
01/22/2010 12:52 AM
Please respond to
[email protected]
To
Gregory Stramat <[email protected]>
cc
Subject
Bridge Does Not Automatically Bring Up Photoshop When
the Photo is Double-Clicked
This might mean that you have either 2 installs of CS4 (one on an other
disk?) or you did not use the the default application folder on root level
but have it installed in the user account application folder. Could you
check this?
and go to "Open With" and there are two entries:

I cannot open my iphoto application. The minute I double click on the icon I get the rainbow which spins forever. I've used Applejack to repair the hd, but even that didn't work. I've getting into iphoto preferences..can't. Help!

I cannot open my iphoto application. The minute I double click on the icon I get the rainbow which spins forever. I've used Applejack to repair the hd, but even that didn't work. I've getting into iphoto preferences..can't. Help!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Open the file by double click

hi
I'm writing a program like desktop search engine but � have a problem by opening the searched file. How can I first choose the searched file on screen and also how can I open the file by double click?
p.s I'm using windows

gokche wrote:
hi
I'm writing a program like desktop search engine but � have a problem by opening the searched file. How can I first choose the searched file on screen and also how can I open the file by double click?Please provide more detail; this isn't very clear. What do you mean by "the searched file"? What do you mean by "choose the searched file on screen"?
p.s I'm using windowsFortunately, this shouldn't matter.

HT201365 Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How N

Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How Now?

and
Because my first response would be....Oh, sure.....
Because I am sorry you are having a hassle with the intenet. There is nothing more frustruating than having to deal with a slow response, or a makeshift connection....hope it gets fixed soon!!!
Your friend,
GB

I somehow set portrait lock on my iphone4, and then closed the app by double clicking the home button. So now how to I access it again? Or do I have to completely restore my ph to factory settings?

I somehow set portrait lock on my iphone4, and then closed the app by double clicking the home button.
So now how to I access it again? Or do I have to completely restore my ph to factory settings?

Double click the home button again, slide to the left and tap the screen lock button.

Is there a way to close apps on an iPod 4th gen without double clicking the home button?

My iPod touch screen has a fault exactly where you press the red minus to close the apps. I there another way to close the apps without having to delete them then redownload them onto the iPod?
Thanks for any advice!

Understanding multitasking
http://support.apple.com/kb/HT4211

In an album, many pictures would show on the screen and double clicking one would enlarge it for adjustments. Now one larger photo shows and along the bottom severa smaller ones. Options which used to be at the top right of screen no longer show. Whel

In Aperture album about 16 photos would show on screen and double clicking on one would enlarge it for adjustments. Now one larger image shows with about 7 photos at bottom. Options for controlling this no longer appear at top right. How do I correct this?

Do you mean the "View" controls are missing in your Toolbar?
To add these controls back to the Toolbar, use the View menu and select "Customize Toolbar". Drag the View Controls back to the Toolbar.

Photos don't show individually. they only come up when I double click the blank box. how can I restore iPhoto?

when I open iPhoto, the screen shows only blanc squares where the photos should appear. when I double-click on a square (titled by date taken), all pictures come up. how can I get back to seeing all individual pictures?

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuold the thumbnails. This can take 3 or 4 goes to work

How do I get the line above the tasks, which allows you to edit the cell contents, without double clicking the cell?

As title says.
Normally in Gantt Chart View, above the tasks there's a line which displays the contents of the cell you have selected, and allows you to edit the contents without having to double click the cell.
In my case, this line is not there, and it is slightly hindering my work.
So, does anyone know where I should go to re-enable this line?
Thanks a lot!

Hi,
Go to file, then options, then display and check the "entry bar" option.
http://www.manageprojectsonsharepoint.com/blog/2012/04/02/microsoft-project-quick-tip-entry-bar/
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Why the photo app is not closing after i finish, when i take a picture accessing directly from home screen. the location is draining my battery if I'm not closing the app by double click home button. in iOS 6 was not like this

When im taking a picture directly from home screen after im finished the application remain open. This app is ussing the location and if im not closing like other applications by doble click the home button the batery will finished fast. On the other IOS 5 and 6 was not neccesary to unblock the phone and bouble click the home bottom.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Opening a file WITHOUT double-clicking

In Windows one can open a file from Explorer either by double-clicking or by hitting the Return/Enter key.
In Mac OS X I can only open a file by double-clicking it. So far, using the keyboard I can only rename it (when I hit Return), or delete it (if I press Command+Return).
Is there a keyboard shortcut for opening a file? I am a keyboard person and, sometimes, when I navigate from one folder to another, I would like to open the file without moving my hand to get the mouse.

It's Command-o, for open, of course. As you discovered, pressing Return is the handy short-cut to high-light the file for renaming.
Francine
Francine
Schwieder

Problem while displaying the data when double clicked on JTable element

Hi All,
i have one List box( JList ) and one table (JTable). Both JTable and JList are positioned on the same Frame. I am able to drag the elements from JList to JTable and also i have added the mouse click action on both List box and JTable.
if i double click on JList element, that will popup one dialog box.
if i double click on JTable cell element that was dragged from JList, that will popup same dialog box which was opened earlier for JList action.
But my problem here is:
Suppose if i drag the four elements one by one from JList to JTable and (after four elements dragged) double clicked the first element which was dragged first that displayed the popup dialog box structure correctly but the data displayed in that was not correct. It is showing the data of recent dragged element( i.e, fourth element).
But if i double click on JList element that is showing the correct data according to the double clicked element.
What might be the problem here, why it was not displaying the correct data when double clicked on JTable element.
Please help me here.
Many thanks in advance.
The following code is used in mouse clicked event method of JList
private void listMouseClicked(java.awt.event.MouseEvent evt) {
         if(evt.getClickCount()==2){
         AssigningResourcesUI assignResource=new AssigningResourcesUI(this,true);
         assignResource.show();
}                AND The following code is used in mouse click enevet method of JTable.
private void tableMouseClicked(java.awt.event.MouseEvent evt) {
        if(evt.getClickCount()==2){
         int row=table.rowAtPoint(new Point(evt.getX(), evt.getY()));
         int col=table.columnAtPoint(new Point(evt.getX(), evt.getY()));
         if(row==-1||col==-1){
             return;
          Object obj=table.getModel().getValueAt(row, col);
         if(obj==null||(obj.equals(""))){
           }else{
         AssigningResourcesUI assignResource=new AssigningResourcesUI(this,true);
         assignResource.show();
     }            Thanks & Regards,
Maadhav....
Edited by: maadhav on Jul 1, 2009 7:22 AM

I doubt it is related to your problem but:
int row=table.rowAtPoint(new Point(evt.getX(), evt.getY()));Why are you creating a new Point? Just use evt.getPoint().
Object obj=table.getModel().getValueAt(row, col);Don't get the data through the model method, get the data through the table method:
Object obj = table.getValueAt(...)
This way it will work even if the table happens to be sorted.
Instead of creating a AssigningResourcesUI object, just disply the value retrieved from the model. That way you know whether the problem is with the mouse event code or your UI class. Like Walter suggested above I"m guess the problem is with your UI class.

Show field mara-MFRPN in the MP02 without double click

Similar Messages

Maybe you are looking for