Show/hide layers for repeated recordset data
Is there any product out there to assist with the creation of
show/hide layers for repeated recordset data?
You can't build that functionality in with InDesign — but you can with Acrobat Pro. You've got to use the form builder functions to create a button that will show or hide another element.
d
Similar Messages
-
Can someone please help? Show/Hide layers
Hi there,
I am making a site for a friend and am having some weirdness
that I can't figure out. I have a series of layers that show/hide
based on various selections. Nothing complicated by any means. I am
using the Dreamweaver Show-hide layers functionality. I am sure I
have used it before in exactly the same way and not had this
problem.
So here is what it is. The page loads and most of the layers
are set to hidden and then they get toggled on/off based on various
selections. For some reason when the page loads in IE, all of the
layers are visible. In Firefox they are hidden as intended.
If someone has come across this before, or could take a
moment to look at the site, I would be very grateful. I have stared
at this and tweaked it so much that I am at a loss and I know that
my friend is really needing her site to just be up and running.
Also, now that I think of it, (and this is more of a nuisance
than a problem) I am using the snap layers extension to position my
layers. When you look at my site you will see that the layers look
crazy when the page loads and then eventually move into place. Is
there a way to make it so the layers are just already in place? Or
even if they could not become visible until after they have
snapped?
Thanks in advance. I really do appreciate any help you could
provide.
The address for the test server is
http://www.jcopple.com/rtc/index.html
JoshI agree with the honest answer. This is a very poor way to
make a page.
Nevertheless, in DW's design view, use the A/P Element panel,
and make sure
that the eyeball icon is CLOSED for each layer that you want
to be hidden
when the page loads. Then save and upload the page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"CaptFlynn" <[email protected]> wrote in
message
news:fvdd2f$7t3$[email protected]..
> Hi there,
> I appreciate your honest answer (though it wasn't what I
wanted to hear,
> LOL)
> but for the sake of time I would like to find a solution
to the existing
> problem and then once I have her at least up and
running, I can go back
> and
> code it correctly.
> So if you have any suggestions as to why the layers
wouldn't be hidden,
> Iwould
> really like to hear them.
> Thanks,
> Josh
> -
I am creating a multimedia book. I want to have a button on the page that when clicked will bring up a flash movie in the center of the page and then a button to click that will make it go away.
I have done this quite easily in dreamweaver for websites by a show/hide layers button but do not see how to do it in indesign.
Thanks for any help...You can't build that functionality in with InDesign — but you can with Acrobat Pro. You've got to use the form builder functions to create a button that will show or hide another element.
d -
Hey, I’m having two issues with the Show-Hide Layers
behaviour in Dreamweaver and was wondering if someone else has had
the same problems and has a solution.
My test page is
http://www.petermcphee.com/dreamweaver/popup-layer.html
1) What I would like is to show the layer when the link is
hovered over, which works fine. However, I also want the layer to
remain visible while the mouse is over the layer and disappear when
the mouse leaves the layer.
I Googled for a while and found some tutorials that deal with
showing/hiding layers but they hide the layers once the mouse
leaves the original link, not the layer.
2) Also, the site that I want to apply this behaviour to has
an auto centering wrapper box, so I would like the layer to popup
right underneath the link every time without converting the entire
site to absolute positioning. As it is now, the popup appears at
different locations depending how wide my browser is.
Is this even possible with the current DW functionality?
Thanks a lot!
Peter.> 1) What I would like is to show the layer when the link
is hovered over,
> which
> works fine. However, I also want the layer to remain
visible while the
> mouse is
> over the layer and disappear when the mouse leaves the
layer.
When you show the layer, also show an underlying layer that
contains a
transparent GIF image that is about 10px wider/taller than
the layer you
show. Apply a hide layer behavior to the GIF image that hides
both the
layer you just showed, and the underlying layer. Remove the
mouseout hide
event from the original trigger. Does that make sense?
> 2) Also, the site that I want to apply this behaviour to
has an auto
> centering
> wrapper box, so I would like the layer to popup right
underneath the link
> every
> time without converting the entire site to absolute
positioning. As it is
> now,
> the popup appears at different locations depending how
wide my browser is.
Change this -
</head>
to this -
<style type="text/css">
<!--
body { text-align:center; }
#wrapper { text-align:left; width:760px; margin:0
auto;position:relative; }
/* 760px will display on an 800px screen maximized browser
window without */
/* horizontal scrollbars. */
-->
</style>
</head>
change this -
<body ...>
to this -
<body ...>
<div id="wrapper">
and this -
</body>
to this -
<!-- /wrapper -->
</div>
</body>
and see if that helps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"petertyler" <[email protected]> wrote in
message
news:[email protected]...
> Hey, I?m having two issues with the Show-Hide Layers
behaviour in
> Dreamweaver
> and was wondering if someone else has had the same
problems and has a
> solution.
>
> My test page is
http://www.petermcphee.com/dreamweaver/popup-layer.html
>
> 1) What I would like is to show the layer when the link
is hovered over,
> which
> works fine. However, I also want the layer to remain
visible while the
> mouse is
> over the layer and disappear when the mouse leaves the
layer.
>
> I Googled for a while and found some tutorials that deal
with
> showing/hiding
> layers but they hide the layers once the mouse leaves
the original link,
> not
> the layer.
>
> 2) Also, the site that I want to apply this behaviour to
has an auto
> centering
> wrapper box, so I would like the layer to popup right
underneath the link
> every
> time without converting the entire site to absolute
positioning. As it is
> now,
> the popup appears at different locations depending how
wide my browser is.
>
> Is this even possible with the current DW functionality?
>
> Thanks a lot!
>
> Peter.
> -
Show Hide Layers - Can't do "onmouseout"
I'm trying to do a show/hide layers on an image map hot spot.
I select the <area> tag from the hotspot, and can set the
show layer "onmouseover" but it won't let me set the hide layer for
"onmouseout". In fact when I try to set the "onmouseout", dw justs
makes another "onmouseover" behavior just like the one I already
have. ??? Thanks for any help.Can you go to the behaviors panel and edit the second
"onmouseover" to
change it to an "onmouseout" ?
"lutherheggs" <[email protected]> wrote in
message
news:e5r3u1$nid$[email protected]..
> I'm trying to do a show/hide layers on an image map hot
spot. I select the
> <area> tag from the hotspot, and can set the show
layer "onmouseover" but
> it
> won't let me set the hide layer for "onmouseout". In
fact when I try to
> set the
> "onmouseout", dw justs makes another "onmouseover"
behavior just like the
> one I
> already have. ??? Thanks for any help.
> -
Show/hide layers no mouseover option
I have MX (2004) and am trying to create a simple show/hide
layer behavior on some thumbnails/main images and it is just not
working for me. The behavior has the show/hide option, but it does
not show the arrows active to choose the mouseover and other
events. I have the 'show 4.0 browsers and later' box
checked...anyone know what else it could be? Is there a simple code
I can drop in (I'm an artist, not a programmer, so be gentle)? Any
immediate help at [email protected] would be very much
appreciated!
nullmaggotsquibb wrote:
> I apologise if I am being really thick, but I need some
help!
>
> I have just purchased a copy of Dreamweaver CS3 to
discover that I can no
> longer work with layers as I used to on MX. I frequently
used the show-hide
> layers behaviour so that I can click on an image in one
frame to reveal a layer
> in another frame, however, if I select the image and and
then try to add the
> behaviour, the show hide elements is grey out so that I
cannot even select it
> as an otion.
Do you actually have any layers on the page. You need to put
a layer on
the page first and then apply the show-hide layer behaviour. -
We have a fairly complex navigation using layers to show
dropdowns. It
works in almost all browsers except for Opera on the
Mac(haven't tried PC).
I imagine it doesn't like the Show/Hide Layers code.
Any thoughts about a work around?
-KirkWhy bother? To post something, that is? 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Michael Fesser" <[email protected]> wrote in message
news:[email protected]..
> .oO(W. Kirk Lutz)
>
>>We have a fairly complex navigation using layers to
show dropdowns.
>
> Just curious - does it also work with JavaScript turned
off? Will the
> site still be usable?
>
>>It
>>works in almost all browsers except for Opera on the
Mac(haven't tried
>>PC).
>
> What Opera version?
>
>>I imagine it doesn't like the Show/Hide Layers code.
>
> Hardly. If something doesn't work in Opera, then in
_most_ cases there's
> something wrong in the HTML or the script.
>
>>Any thoughts about a work around?
>
> Can you post a URL?
>
> @Murray: Please don't post something along the lines of
"Why bother
> about Opera?" SCNR
>
> Micha -
Dreamweaver CS3 & Show/Hide Layers Problem
I'm trying to use Dreamweaver CS3 and the Show/Hide Layers
behaviour to show or hide another layer on a click. However, when I
go to the behaviours window and click on the plus to get the drop
down list of behaviours to choose from, 'Show/Hide Layers' isn't
there - can anybody help me?! I need this to get an assignment done
due in really soon.
ThanksIt goes well beyond DW's Show/hide, however....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"twocans" <[email protected]> wrote in message
news:fna57u$51a$[email protected]..
>
http://www.projectseven.com/extensions/info/autoshowhide/index.htm
>
> its a great free extension and simple to use.
>
> regards
>
> k
>
>
>
>
> "xxtotallycrazy" <[email protected]>
wrote in message
> news:fna51o$4so$[email protected]..
>> What I mean by needing help is, does anybody know
where the option for
>> 'Show/Hide Layers' actually is? Please help!
>
> -
Disjointed Rollovers with show / hide layers
Creating a series of thumnails on a page which, when clicked
on, will bring up full size image in one spot and relevant text in
another. I'm using Show / Hide Layers to do this. I've got it all
working fine except stumbling on one thing. Probably obvious.
The question I have is how to make the currently showing
layers go away when the user clicks on another thumbnail. If I was
using onMouseover and onMouseout then that would be simple. But I
can't figure out how to automatically make the layers currently
showing go back to being hidden when another thumbnail is clicked.
What I get instead is the new layers appearing on top of the old
ones and making a mess.
Probably an obvious solution, but my brain is not getting it
at the moment. Suggestions?
Thanks...
-JesseDon't use the show/hide at all. Use SetText of Layer to write
the required
content into a single layer.
Or - if you don't quite get that, just use PVII's AutoLayer
extension which
will show one and hide all the rest automatically.
http://www.projectseven.com/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"JesseLY" <[email protected]> wrote in
message
news:f61nbm$9sn$[email protected]..
> Creating a series of thumnails on a page which, when
clicked on, will
> bring up
> full size image in one spot and relevant text in
another. I'm using Show /
> Hide
> Layers to do this. I've got it all working fine except
stumbling on one
> thing.
> Probably obvious.
>
> The question I have is how to make the currently showing
layers go away
> when
> the user clicks on another thumbnail. If I was using
onMouseover and
> onMouseout
> then that would be simple. But I can't figure out how to
automatically
> make the
> layers currently showing go back to being hidden when
another thumbnail is
> clicked. What I get instead is the new layers appearing
on top of the old
> ones
> and making a mess.
>
> Probably an obvious solution, but my brain is not
getting it at the
> moment.
> Suggestions?
>
> Thanks...
>
> -Jesse
>
>
> -
Making links that show/hide layers?
Hi all,
I created an InDesign cs4 file which is pretty much a guide for users of my liveCicle form. I have a bunch of layers in the file.
I'm trying to make links associated with images that are in its own layers. So when i export the file to pdf and hit certain link, layer associated with that link shows up. I tryed to do this in acrobat 9 pro. I created links, but the problem is that links in non visible layers work behind the scene when i hover over.
Is there a way to set layer visability in inDesign CS4?
Thanks in advanceNo you can´t toggle layer visibility with buttons made in indesign. You have to finish it in Acrobat....
Only way to make something appear or disappear in ID is to use show/hide buttons action...
You can convert those images you want to show&hide to buttons. Then you can create another buttons to show or hide them.
If you export as PDF, default state of a button can be hidden... -
Show/Hide Layers or Divs "onclick"
I'm trying to create a page of thumbnail images in a chess
board affect. I want to be able to click on a thumbnail and have a
larger version appear on the top left of the thumbnails covering
about 4 of them. The larger version needs to have some text and a
"close" button to hide the large image again. Similar to the image
gallery example on:
http://pmob.co.uk/pob/disjointed1.htm#null
Can anyone advise me?
ThanksUse DW's Show/Hide behavior.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"maffew" <[email protected]> wrote in
message
news:fke7td$ep5$[email protected]..
> I'm trying to create a page of thumbnail images in a
chess board affect. I
> want
> to be able to click on a thumbnail and have a larger
version appear on the
> top
> left of the thumbnails covering about 4 of them. The
larger version needs
> to
> have some text and a "close" button to hide the large
image again. Similar
> to
> the image gallery example on:
http://pmob.co.uk/pob/disjointed1.htm#null
> Can anyone advise me?
> Thanks
> -
How to show a report for 'Previous Month' Data
Hi Gurus,
I have a requirement, where i have to default my report to show previous month data.
Scenario:
My prompts by Default are set to CURRENT (current year,quarter,month). once the user logs in, the report should display data for month 'Nov' instead of 'Dec'.
I tried using TIMESTAMPADD() in the formula , but it didn't work, though i don't see any error. Not sure if i 'm missing something.
Is there a way to achieve this.I 'm using OBIEE 11.1.1.6.
Any help is highly Appreciated ! Please.
Thanks,
RamyaFrom what you wrote I am assuming the user can manually save the report results to the Excel file.
If your report uses ALV Grid it is possible to export the data to a spreadsheet (one of the functions available in the ALV tool bar).
If you have used WRITE statements it is also possible to save the output as a spreadsheet (menu System -> List -> Save), but the latter will not produce as nice a spreadsheet if the data don't form a matrix. In other words, some work may be necessary in the spreadsheet afterwards before it has the format your user wants. -
Dynamically show/hide columns for DelimitedData output
My users want to see only dynamic sets of data from the same report query.
For example, if the query returns:
Date, Widget1Count, Widget2Count, ..., WidgetZCount
User1 wants to see Date and counts for widgets 1,2, 5, and 10
User2 wants to see Date and counts for widgets 2, 3, 4, 5, 10-20.
Uset3 wants to see Date and widget 99 count.
I don't want to write a custom report for every single user nor do I want to create Z! number of queries to satisfy every possible request combination.
I wonder, is there a way to change "Exclude from XML Output" property for a particular query field(s) from a report AfterPForm or BeforeReport trigger?Hi,
I had the same problem, but I saw the Metalink document: 340793.1, which gave the solution I needed.
In my case, I needed to limit the number of columns being outputted in a DELIMITEDDATA format based on a user parameter.
I ended up with the following code in my After PForm trigger, which did the job.
BEGIN
SRW.ADD_DEFINITION('<report DTDVersion="1.0">');
SRW.ADD_DEFINITION('<customize>');
-- For those columns I want displayed, Set the XMLSuppress property to False
FOR tmp IN 1 .. 10 LOOP
SRW.ADD_DEFINITION('<object name="col_'||LPAD(TO_CHAR(tmp), 3, '0')||'_title" type="REP_COL_MAP">');
SRW.ADD_DEFINITION('<properties>');
SRW.ADD_DEFINITION('<property name="XMLSuppress">False</property>');
SRW.ADD_DEFINITION('</properties>');
SRW.ADD_DEFINITION('</object>');
END LOOP;
-- For those column I don't want displayed, Set the XMLSuppress property to True
FOR tmp in 11 .. 100 LOOP
SRW.ADD_DEFINITION('<object name="col_'||LPAD(TO_CHAR(tmp), 3, '0')||'_title" type="REP_COL_MAP">');
SRW.ADD_DEFINITION('<properties>');
SRW.ADD_DEFINITION('<property name="XMLSuppress">True</property>');
SRW.ADD_DEFINITION('</properties>');
SRW.ADD_DEFINITION('</object>');
END LOOP;
SRW.ADD_DEFINITION('</customize>');
SRW.ADD_DEFINITION('</report>');
SRW.APPLY_DEFINITION;
END;
I hope this helps with your problem.
Paul -
How do I show hide layers in dreamweaver CS6?
I'd like to use this instead of image swap, becuase I have images of different aspect ratios.
how do I stack images ontop of each other in the same place.
With CSS absolute positioning. Also be sure to apply position:relative to your parent container or #wrapper div.
#wrapper {
width: 90%;
position:relative;
#Layer1,
#Layer2,
#Layer3,
#Layer4 {
width: xxpx; /*your widest image*/
height:xxpx; /your tallest image*/
top: xxpx; /*position from top*/
left:xxpx; /*position from left*/
position: absolute;
Nancy O. -
Need help with show/hide and layers moving
I'm more of a designer, so I don't know code or CSS well at
all. I'm doing an online portfolio for a class and need help with
layers not staying in place in different browsers. The portfolio is
created with a table, but I wanted to use the show/hide function
for thumbnails of work. Are layers the only way you can use this
function? I read layers don't work well with tables, so how else
can I make it so when you mouse over a thumbnail, the larger image
appears in another cell?> I don't know code or CSS well at all.
That's unfortunate.
> layers not staying in place in different browsers.
Layers don't move. But the rest of your page does.
Before you get too wrapped up in layers, though, please read
this -
http://www.great-web-sights.com/g_layerlaws.asp
They are not good when be used as a primary layout method.
> I read layers don't work well with tables
They work fine with tables - but you have to understand both
tables and
layers to use them.
Why not show us your page, so we can see what you are
struggling with?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Bobbi67" <[email protected]> wrote in
message
news:ertd9h$h3m$[email protected]..
> I'm more of a designer, so I don't know code or CSS well
at all. I'm doing
> an
> online portfolio for a class and need help with layers
not staying in
> place in
> different browsers. The portfolio is created with a
table, but I wanted to
> use
> the show/hide function for thumbnails of work. Are
layers the only way you
> can
> use this function? I read layers don't work well with
tables, so how else
> can I
> make it so when you mouse over a thumbnail, the larger
image appears in
> another
> cell?
>
Maybe you are looking for
-
HT6337 HandOff feature does NOT work
HandOff feature does NOT work on my iPhone6 and iPad Air. I have the latest updates (iOS 8.1) installed and my MBP is on Yosemite 10.10... I have my iPad Air, iPhone6, and MBP on the same network. And, I have bluetooth enabled. Yet, I don't see the h
-
Hi All, We have 3 revenue value fields and created new value field to capture total revenues for all 3 revenue value fields. only new sales orders total revenue value field is populated with revenues.how can we update old sales orders revenue value f
-
Where has my vertical scroll bar gone?
I just disappears on most web sites right after I make any mouse move. I am running Windows 7. This has been happening for about a month now. Thanks in advance.
-
Good morning all, first of all, im not sure if this should be posted here, or on the dreamweaver forum, so I thought I'd try here first. I want to put a gradient background and drop shadow on the same page, but am really not sure how technically you
-
Dear All, I wish to authorize only certain users to execute a report. I know it's an admin issue but can I achieve this through my ABAP code also? Regards, Alok.