Show in Answers date of end aggregation made in an essbase ASOcube....

Hallo all,
maybe somebody has desided a problem i have:
i need to show in a report, made in Answers Oracle BI EE for a multidimensional essbase ASO cube, a date of end last aggregation in a cube.
I dont have any idea about possibilities:
firstly get a date of end last aggregation in an essbase ASO cube
secondly show thi date in an oracle bi ee report....
Maybe somebody has to have th esame problem....
Thank a lot for "helpful help"))

Off the top of my head you could probably scrape the application log using perl or some other programming language. Look for something like:
Successfully built [xx] new aggregate views. Elapsed time [xx.xx] sec
Other than that, not sure.

Similar Messages

How to get a date of end last aggregation made in an essbase ASOcube....

Hallo all,
maybe somebody has desided a problem i have:
i need to show in a report, made in Answers Oracle BI EE for a multidimensional essbase ASO cube, a date of end last aggregation in a cube.
Is it possible to get a date of end last aggregation in an essbase ASO cube
Thank a lot for "helpful help"))

Off the top of my head you could probably scrape the application log using perl or some other programming language. Look for something like:
Successfully built [xx] new aggregate views. Elapsed time [xx.xx] sec
Other than that, not sure.

Can a Quiz show Wrong Answers at End?

I have found tutorials outlining how to make a simple quiz that says if you got the individual question right or wrong.
My client would like to display the wrong answers "AT THE END". Is there something possible along these lines?
Thanks:)

Hopefully never too late to chip in...
You can certainly show the user what they got right and wrong, or only what they got wrong as you see fit, but it is not a simple matter to do. A lot will depend on the length of the quiz, the number of registers you are using to create it and so on. However, in just the same way that you can keep track of how many you scored, you can also create a system that takes you through a number of screens to say what you got wrong.
However, you cannot automatically generate a list of the incorrect answers and present them as a single screen (or menu) unless you have only got a very few questions in total. This is because you need to create a screen for every single possible combination of answers and pick the right one from the whole lot.
Instead, what you do is show a screen saying something like "you got five wrong... click to see them" and then present the viewer with a series of five screens that they can click through to see where they went wrong.
It isn't a straightforward task for anyone who has not scripted a DVD before... but it is possible to do.
How many questions are there in total on your quiz?

System Message Shows in Future Date

Dear Experts,
In Our SAP BI System , The System Message SM21 shows in Current & future date both problem messages
SAP Server OS and SAP BI Application Time and date both are in sync
The BI system which is connected to ECC PRD also having a sync
Remote monitoring are not configured in this system,
System Log: Local Analysis of GEEPASBIPRD                  2
Date : 22.12.2010
Time     Type Nr Clt User         TCode Priority Grp N Text
10:02:54 DIA 001 350 GPKWTHOFI03                 BY E Invalid parameter ObjTooLar
10:04:07 DIA 001 350 GPKWTHOFI03                 BY E Invalid parameter ObjTooLar
                   System Log: Local Analysis of GEEPASBIPRD                  3
Date : 02.01.2201
Time     Type Nr Clt User         TCode Priority Grp N Text
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:90           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
20:20:90           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
40:20:81           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
71:31:41           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
71:31:41           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
90:20:84           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
                   System Log: Local Analysis of GEEPASBIPRD                  4
Date : 03.01.2201
Time     Type Nr Clt User         TCode Priority Grp N Text
00:20:85           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
00:20:85           35 BIWREMOTE                  hB Y Missng:TSL1TE,hBY):154 EXE
                  System Log: Local Analysis of GEEPASBIPRD
          C o n t e n t s
Content            Page         Start          End
Selection criteria   1
                     2 22.12.2010 10:02:54 22.12.2010 10:04:07
                     3 02.01.2201 20:20:84 02.01.2201 90:20:84
                     4 03.01.2201 00:20:85 03.01.2201 00:20:90
                     5 02.01.3201 01:23:65 02.01.3201 90:40:42
                     6 03.01.3201 00:40:41 03.01.3201 11:62:24
                     7 02.01.4201 01:22:30 02.01.4201 90:40:42
                     8 03.01.4201 00:40:41 03.01.4201 11:62:24
                     9 02.01.7201 11:42:21 02.01.7201 31:71:95
                    10 02.01.9201 01:22:30 02.01.9201 81:41:10
                    11 03.01.9201 00:95:23 03.01.9201 11:11:94
                    12 02.01.A201 01:22:30 02.01.A201 81:41:10
                    13 03.01.A201 00:95:23 03.01.A201 11:62:24
                    14 02.01.E201 11:24:13 02.01.E201 71:50:52
                    15 02.01.I201 01:22:30 02.01.I201 81:41:10
                    16 03.01.I201 00:95:23 03.01.I201 11:62:24
                    17 02.01.R201 01:22:30 02.01.R201 81:41:10
                    18 03.01.R201 00:95:23 03.01.R201 11:62:24
Contents            19
Thanks
Jai

Hi Thahir,
I deleted the SLOG and Restarted the system now its not showing the future date,
Issue resolved.
Thanks ,
Jai

Showing item created date in custom alert template

Hi,
I'm working on customizing the sharepoint alert templates for my site collection.
I got good info on net regading the modifications to be made. But unfortunately, I couldn't fine info about showing the
Created Date column of the item.
I need to show the item created data and modiifed date vlaues in my alert email,
I've 'TimeStamp' property which shows the modiifed date. But Im not getting equivalent property for created date.
I've tried the below options
NewValue#Created
NewValue#ItemCreated
OldValue#Created
DisplayName#Created
None of them are showing hte created date of item.
There is one attribute 'RawValue' which is giving the created date. but it's display format is really not user friendly
It shows date as 2013-09-08 T 11,40..Z
Is there any way to show item created date in alert emails? I dont want to use custom code for it.
I need to use OOB approach. Or atleast is there a way to format the above date displayed thru 'RawValue' attribute.

Thanks Arif, it did not work. One note though, if we are using the field name we do not use the brackets:
<GetVar Name=”OldValue#Created_x0020_Date”
/>
Both with and without brackets did not
work.
Thanks for the suggestion,
Mike

Need to show Previous months data in report

Hi All,
I have a crystal report 2011 which shows monthly Cash data. It has 3 other columns like Previous 3 months cash data, previous 6 months cash data, Previous 12 months cash data in report.
My report also has two parameters- start date and end date. If I give Start date as 1/1/2012 and end date as 12/31/2013 (two years date range) then correct data comes in all columns and for 2013 year, correct data is coming for Previous 12 months column. But if I give only one month date range like start date as 1/1/2013 and end date as 01/31/2013, then it is not showing correct data for these 3 columns - Previous 3 months cash data, previous 6 months cash data, Previous 12 months cash data. Ideally as per requirement, it should calculate previous months data regardless of parameter values and put data in respective columns.
Any help/suggestion? Any trick which can help me to show correct data in all columns no matter what date range or months I am taking in parameters.
Is it mandatory to have previous 12 Months data in report to calculate column-Previous 12 months Cash data?
Thanks,
Remi

Hi Remi,
You can try like this:
I have given a some suggestions i.e You just take one parameter only because u can imagine 3 columns previous data display correctly i.e From Date
Month parameter is also a alternate option.
For Ex: Column1: From Date - 90 Days/3 Months - we get the three months previous data correctly etc.
Finally, create a stored procedure that returns the required columns and does all the calculations on the database side.
Follow abhilash suggestion as well.
Useful threads: Crystal Report Parameter Issue
Pull Last 6 months of data
Month to date data for Previous month
How to find current month, previous month Net Sales by means of formula?
Thanks,
DJ

Modelling Time Dimension with Fact Table containing Start Date and End Date

Hi Gurus,
I have a time dimension with Year till Date. I have a fact table which consists of Start Date, End Date, Person ID, Department ID.
How do i design Time dimension with fact table the below scenario
In the dashboard i have start Month and End month as prompts.
In the report i need to display Count(Person ID) > Start Date and < End Date along the trend.
For instance, i have selected Jan-2009 as start date and Apr-2009 as End Date, then i need to display Count(Person ID) of Jan-2009, Feb2009, Mar-2009 andApr-2009.
I Can not connect Time dimension with only Start Date or only with End Date to get the trend along the months.
Please advice on the issue which i am having.

Hi,
Thanks for the response, Infact i tried using Complex join in physical layer. I have considered Time table joined with Fact table, and used >= and took and alias of the Time table and joined fact table using <=. When coming to BMM, i am not knowing how do i design this as if i merge the both the time dimensiona and its alias into single table, values will not be correct and if i make them as seperate columns. i can not show the trend as both are different columns.
Can you please let know where i am going wrong.
Thanks

To show Last Update Date(Date datatype) as per User Preferred TimeZone

VO RuleSetVO.xml has a timestamp attribute LastUpdateDate.In UI,this VO is shown in table format and the last update date is shown in date format and there is QBE filter enabled on it.
As there is a QBE enabled on last update date and our filltering view criteria requires a date attribute,we have made use of a transient date datatype attribute LastUpdateDateQBE which gets the value from the LastUpdateDate in VOrowImpl and LastUpdateDateQBE (date attribute) is shown in UI.
Now,we have a requiement to show the date in UI in user preferred time zone instead of DB server timezone.
Any pointers to the solution??
Note:
1.LastUpdateDateQBE is a date attribute,cannot use <timeZone="#{applCorePrefs.UPTZ}"/> as this doesnt hold good on date attribute
2.There might be differences between the DB server timezone and the timezeone in which the database records are stored i.e both might not be in sync always.
Jdev and ADF information:
ade:[ amujahed_rupaug08 ] [amujahed@indl64066 fusionapps]$ jdev getJdevAdfLabelInformation
Primary == FUSIONAPPS_PT.11.1.1_LINUX.X64_110807.0800.S (Primary Product for the view)
Primary depends on FMWTOOLS == FMWTOOLS_11.1.1.5.0_GENERIC_110505.0801
FMWTOOLS depends on label == JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013
The above label originated from base label == JDEVADF_MAIN_GENERIC_090903.1833.5483

I would have to think that someone on the fusion apps team has already dealt with something like this - why not ask your peers instead of a public forum (we don't know all the ins-and-outs of fusion apps and any utility methods that may be available for you)
John

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

HA! I figured the find my iphone out!!!!! You can have more than one icloud account in "Mail, Contacts and Calendars". So my husband's & kids' phone icloud account under "settings, icloud "is their individual @me.com account. Set it to everything you want EXCEPT Find My Iphone. Then under "settings, mail/contacts/calendars" you set up both accounts (your @me.com which may already be there), then add another with the main appleID and enable ONLY Find My Iphone. Now when any of us log into Find My Iphone from any device with our main apple ID for the app store, all the devices show up!!!! YIPPEE. I made my own day!
I think the message I got previously was because I hadn't disabled the find my iphone on the @me.com account first.

How do I import my (many) videos so iMovie separates them by the date they orig. were made?

How do I import my (many) videos so iMovie separates them by the date they orig. were made?
(Like iPhoto does with photos) But not one at a time! If that is not possible with IMovie, can iTunes do that?
I want to import my videos from an external drive to my Mac Book Pro 10.8.3. Thank you so much for your time and patience.

Hi Walter,
Welcome to the Support Communities!
The article below will give you some insight as to how iMovie organizes video:
iMovie '11: Organize your video
Organize the Event Library
When you import video from your camera into iMovie, you name the video (called an Event), and then by default iMovie lists it in the Event Library by the date it was recorded.
To separate clips in the Event browser by the days they were recorded, choose View > “Show Separate Days in Events.”
You might want to do this if you have any Events that contain video that was recorded on more than one day. For example, an Event could have video recorded on New Year’s Eve and on New Year’s Day. To find specific clips more easily, you could separate the footage by date.
I hope this information helps ...
- Judy

Segment Count updated date shows a future date

Hi all,
When the cursor is moved on the Segment's count it shows future date as 'Updated Date'.
It's happening for the fresh update count of any Segment/Segment Tree in the application. When the cursor is moved on the counts of any segment which was updated in the past show correct date.
We tried doing a fresh 'Update Counts' and saving the Segment, still when the cursor moved on the count it shows a future date as updated date.
Web server and Analytics server system dates are set to correct date.
But in the Marketing Administration tool sessions show correct dates.
Any quick update/help is greatly appreciated.
Thanks in advance.

with
data_table as
(select 'A' task,date '2013-12-01' started,date '2013-12-05' ended from dual union all
select 'B',date '2013-12-03',date '2013-12-04' from dual union all
select 'C',date '2013-12-04',date '2013-12-05' from dual union all
select 'D',date '2013-12-06',date '2013-12-07' from dual
date_periods as
(select date '2013-12-01' started,date '2013-12-03' ended from dual union all
select date '2013-12-03',date '2013-12-04' from dual union all
select date '2013-12-04',date '2013-12-05' from dual union all
select date '2013-12-06',date '2013-12-07' from dual
select to_char(p.started,'yyyy-mm-dd') "Start",
       to_char(p.ended,'yyyy-mm-dd') "End",
       count(*) "Count",
       '('||listagg(t.task,',') within group (order by t.task)||')' "(Jobs)"
from date_periods p
       left outer join
       data_table t
    on greatest(t.started,p.started) < least(t.ended,p.ended)
group by p.started,p.ended
order by p.started
Start
End
Count
(Jobs)
2013-12-01
2013-12-03
1
(A)
2013-12-03
2013-12-04
2
(A,B)
2013-12-04
2013-12-05
2
(A,C)
2013-12-06
2013-12-07
1
(D)
Regards
Etbin

Script is throwing error - Comparing two dates (start/end dates)

I do have two fields (dateRequested - start date & dateNeeded - end
date) and I need to basically test to make sure that End date is not
before the Start date. Also, I want to make sure if they are same
date, they got this message " Contact Abdi".
I am getting this error message: "Syntax error near token "=" Line 7
Column 32.
========================================================================
if(DateTimeNeeded.rawValue <> null and DateTimeRequested.rawValue <> null)
then if(DateTimeNeeded.rawValue < DateTimeRequested.rawValue) then
xfa.host.messageBox("It cannot be before the Start date!", "Date Checker", 3)
$.rawValue = ""
xfa.host.setFocus (xfa.form.form1.DateTimeNeeded)
endif
//This is where I think is the problem..
if (DateTimeNeeded.rawValue = DateTimeRequested.rawValue ) then
xfa.host.messageBox ("Please contact Abdi since you're requesting same day")
$.rawValue = ""
xfa.host.setFocus(xfa.form.form1.DateTimeNeeded)
endif
endif
========================================================================

With your date fields with a display format of "MMM DD, YYYY", you can place the following script in the "DateTimeRequested" field's exit event:
var msg = Concat("DateTimeRequested.rawValue = ", DateTimeRequested.rawValue, "\u000a")
var RequestedRV = Date2Num(DateTimeRequested.rawValue)
msg = Concat(msg, "Date2Num(DateTimeRequested.rawValue) = ", RequestedRV, "\u000a")
var RequestedFV = Date2Num(DateTimeRequested.formattedValue, "MMM DD, YYYY")
msg = Concat(msg, "Date2Num(DateTimeRequested.formattedValue, 'MMM DD, YYYY') = ", RequestedFV , "\u000a \u000a" )
msg = Concat(msg, "DateTimeNeeded.rawValue = ", DateTimeNeeded.rawValue, "\u000a")
var NeededRV = Date2Num(DateTimeNeeded.rawValue)
msg = Concat(msg, "Date2Num(DateTimeNeeded.rawValue) = ", NeededRV, "\u000a")
var NeededFV = Date2Num(DateTimeNeeded.formattedValue, "MMM DD, YYYY")
msg = Concat(msg, "Date2Num(DateTimeNeeded.formattedValue, 'MMM DD, YYYY') = ", NeededFV, "\u000a \u000a" )
var Diff = NeededFV - RequestedFV
xfa.host.messageBox(Concat(msg, "Difference in days: ", Diff), "Difference in Days", 1)
When you fill in both dates and exit the needed field you will get a pop-up showing the results.
Note: it is best to set the "Display Pattern" and use the same pattern for the "format" parameter in the Date2Num funciton as this is a value that you can control and know will be correct for the conversion.

Calculate "remaining period" from key date and end-of-term

Hello BEx fans
We are reporting on InfoCube 0CFM_C10, Positions for Position Value Date.
http://help.sap.com/saphelp_bw32/helpdata/en/0b/eaf69b46f2304291b9533a15e5fead/frameset.htm
As filter variable we have 0CALDAY which is a key date, showing the positions for position value at the given (key) date.
End-of-term, 0FS_TRME_D, is a navigational attribut of 0CFM_SEC_ID (ID Number of Securities & Futures).
We have the following characteristics for reporting:
0CFM_SEC_ID and 0COMP_CODE
We have some position key figures also for reporting.
Now we would like to calculate the "remaining period" in years which is calculated as ((" 0FS_TRME_D" minus "key date") DIV 360).
The key date is given by the business user when executing the query.
How would you calculate this "remaining period"?
Thanks
BEOplanet

Hi,
As you know that Key date works with Time dependent Master data for that particular data enters by User. This key date is applicable for the entire Query.
If you want to apply some logic like Key Date-1 could be implemented by creating an User Exit variable which takes input as Key date and this will return the required result.
A helpful document for you:----
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Regards,
Suman

BI page does not show me latest data..

Hi,
I have an application which continously updating the database which BI is referreing to.
And I am observing my BI page, I dont see the updated data. It always shows me old data. The latest data gets reflected only when I do "Update row count" in Admin tool for rpd.
Please help in resolving this.
thanks
Shubha

This is a generic comment. Always have a caching strategy in place. BI EE is one of those unique toolsets that gives you wonderful caching mechanisms. But again if this is not properly used it can be a bane for most systems. So, if you are reporting out of a real-time transactional system where data changes in real time and also if you want to see ( as a report end user) these changes then disable the caching as Chino and Elio said. But if you are reporting out of a data warehouse where data changes after a weekly or a nightly cron job then just have caching in place for that period of time. You can purge the cache on a daily basis. Check my blog entry here http://oraclebizint.wordpress.com/2007/12/18/oracle-bi-ee-101332-scheduling-cache-purging/ for purging the cache. That should give you an idea. But again as always careful planning has to go through before deciding on the type of caching you would need.
Thanks,
Venkat
http://oraclebizint.wordpress.com

Firefox 35 health report has stopped recording startup times on Feb 3-4-5. It does show last start up at end of graph. What is causing this?

Firefox startup times are blank for Feb 3-4-5. Tried it in safe mode with no luck. All startup times are shown before those dates but not after. Does show current startup time at end of graph. Everything else on page works.

''JimTM [[#question-1045394|said]]''
<blockquote>
Firefox startup times are blank for Feb 3-4-5. Tried it in safe mode with no luck. All startup times are shown before those dates but not after. Does show current startup time at end of graph. Everything else on page works.
</blockquote>
I have had similar problem for much longer, I only get average startup time whether I select ALL or AVERAGE

Show in Answers date of end aggregation made in an essbase ASOcube....

Similar Messages

Maybe you are looking for