Show in Finder Option Missing from Search

I can't figure out how to find the "Show in Finder" option after searching for a file. Is there some new secret finger gymnastics option to get this to show up? It used to be all I had to do is right-click.

I found "Show all in Finder" after scrolling down like you said. Unfortunately, that does not show those search results in the finder, it runs a new search and shows thousands of results that I have no interest in. What I want is the "Top Hit" usually, but it becomes a needle in a haystack after clicking "Show all in Finder". With trial and error I found that if I hold down the Command key, the tail end of the file path is shown in the preview window, but not enough to find the file and it is not clickable.
Another thing I found is that if you click on the Kind section heading, it will run a search showing all documents of that kind -- also useless since there are thousands. Unfortunately clicking on "Top Hit" does nothing. Is it possible there is another secret way to get the functionality I want that used to be there?

Similar Messages

  • UCM 11g File missing from search result although file is accessable

    When I do search without any criteria in UCM 11g, some files missing from search result although I know the files were checked into UCM already since I'm able to see these files using url similar to:
    http://ucm/cs/idcplg?idcService=GET_FILE&dID=12345
    or use following url to get document information:
    http://ucm/cs/idcplg?idcService=DOC_INFO&dID=12345
    the file is not in the search resule even search by ID.
    also, the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
    Is this a known problem? the same search was working in UCM 10 perfectly.
    Thanks

    The query seems able to retrieve the missing document. for example, I search by content ID, in the audit log (eanbled as you mentioned) give th efollowing information:
    fusionappsattachments/6     09.13 06:22:03.878     IdcServer-3474     --- @ResultSet SearchResults ---
    fusionappsattachments/6     09.13 06:22:03.878     IdcServer-3474     numFields=66,*numRows=1*,currentRow=0
    also, the infomation following above give the deteail field information which match with the missing document.
    I looks like UCM just did not bring it to UI as part of search result.
    This seems match with my another finding as I mentioned earlier: the seach result say "displaying 1-20" but only display few files (e.g. 2 files, less than 20)
    it seems query did find the documents but UI did not show it.
    Not sure if this is a known bug.

  • "Deploy" Option Missing from VS

    We just finished installing SharePoint 2013 RTM and VS 2012 for development purposes. I also installed the Preview 2 of the Office and SharePoint Dev Tools. The "Deploy" option which was previously present in Visual Studio to deploy SharePoint projects seems
    to have disappeared. Oddly, I can however still tell the projects to Debug, which does the equivalent of Deploy + starts the debugger.
    This is an extremely annoying issue as it is much faster to Deploy without starting the debugger. If anyone has any solution I'd be very appreciative. Thanks.

    try these linsk:
    https://louisliang.wordpress.com/2013/07/02/deploy-option-missing-from-visual-studio-2012-for-sharepoint-project/
    https://social.msdn.microsoft.com/forums/sharepoint/en-US/c7b00231-680f-4fa1-b7ea-0008697c8122/visual-studio-2012-missing-deploy-option-on-build-menu
    http://stackoverflow.com/questions/22944015/deploy-option-missing-visual-studio-2012
    http://sharepoint.stackexchange.com/questions/49718/where-is-package-menu-item-in-visual-studio-2012
    http://sharepoint.stackexchange.com/questions/82878/missing-deploy-button-visual-studio-2012
    Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

  • Combine Files into a Single PDF option missing from start up in Acrobat Reader XI

    The 'Combine Files into a Single PDF' option missing from start up in Acrobat Reader XI and is also not available on the right-click button.

    There's no such thing as "Acrobat Reader XI". There's the free Reader, which doesn't have this option, and there's the paid product Acrobat, which does...

  • Why is the "basic" edit option missing from the develop module?

    why is the "basic" edit option missing from the develop module?

    http://www.lightroomforums.net/showthread.php?19775-Missing-Panels-Modules

  • Personal hotspot option missing from my ipad , please do help me fix this problem

    why is the personal hotspot option missing from my ipad ?

    Personal hotspot is only on the iPad 3rd generation and higher and the iPad mini, not avail on the iPad 2. Heres the information from apple about the personal hotspot http://support.apple.com/kb/ht4517

  • HT4859 i couldn t find option restore from icloud

    i couldnt find option restore from icloud for my new iphone5

    Restoring to an iCloud backup has to be done in the initial setup process.  If you have any newer data on your phone now that is not in the backup that you want to save you'll need to do that first.  Then go to Settings>General>Reset and tap Erase All Content and Settings.  You will then go through the setup screens as you did when the phone was new. When given the option, choose Restore from iCloud Backup (see image below).  Be sure you are connected to wifi and your charger as this will take some time to finish.

  • Search option missing from iWeb site after MobileMe transition

    I'm assuming this is a residual bug from the transition to MobleMe, but I've just noticed that my site published with iWeb is missing the Search box on the home page. Just curious if anyone else has had this, or anyone has found a fix.
    Tried republishing the site, but still no joy. Also tried viewing the site via the new MobleMe address as well (as opposed to old .Mac address), and it's missing there too.
    Bueller? Anyone?

    Strange, my friend on the latest Firefox could not see the search bar, but when I asked her to load into Safari, the webpage loaded up fine (on a Powerbook). I then tried to load up the page on Safari with my Powerbook, but no dice.
    I then booted up into Windows XP and tried viewing my webpage via IE 7, Firefox 3 AND Safari, and the search bar STILL does not show up. The search bar is not limited to Mac OS X and Safari (on a Mac) right?

  • Options missing from AirPort Utility

    I have several Airport Express devices with AirTunes and Printer sharing set up.
    I need to turn on the "Share printers over Ethernet WAN port" setting but it is missing from the Airport Utility today. I'm sure I've seen it there before. I can even find it in the "Find a setting" search, i.e. I type "share" and "Share printers over Ethernet WAN port" shows up in the suggestions. When I click on it I'm taken to the tab that the manual says it is on but it just isn't there. Not even greyed out!
    Has anyone seen anything like it?

    How do you have the AirPort Express (AX) configured?
    This setting would only be available if the AX is:
    (a) Connected directly via Ethernet to the internet or LAN.
    (b) Configured to create a network.
    (c) Configured to share a single IP address (distributing IP addresses).
    This setting would not be available if the AX is configured to operate as a bridge. In this mode, printing and music streaming services are available through the Ethernet port so there is no need for the option.
    This setting also would not be available if the AX is configured to join a wireless network as a client. In this mode the Ethernet port is disabled.

  • Showing Yes/No option  popup from backing bean

    Hi,
    I have a af:query popup where i search for the results using the backing bean.
    So if this query retrieves more than say 100 rows, I want to show an Yes/No option popup from baking bean informing the user that "the result rows exceed 100, do you wish to continue"
    So on click of yes i will continue processing the result rows otherwise i will dispose the option popup.
    Please note i also need to use the Message bundle for localizing the message in the backing bean.
    Thanks
    Ajay

    What I do.
    In my jspx:
                   <af:popup binding="#{backingBeanScope.backing_site_search.msgPop}"
                             id="msgPop" contentDelivery="lazyUncached">
                     <af:dialog binding="#{backingBeanScope.backing_site_search.msgDiag}"
                                id="msgDiag" type="yesNo">
                       <af:outputText binding="#{backingBeanScope.backing_site_search.msgText}"
                                      id="msgText"/>
                     </af:dialog>
                   </af:popup>In my backing bean, when I need the popup:
    myUtils.showPopup(this.getMsgPop().getClientId(FacesContext.getCurrentInstance()));In my utility bean:
        public static void showPopup(String popupId){
          ExtendedRenderKitService service =
              Service.getRenderKitService(FacesContext.getCurrentInstance(),
                                          ExtendedRenderKitService.class);     
          service.addScript(FacesContext.getCurrentInstance(),
                            "AdfPage.PAGE.findComponent('"+popupId+"').show();");
        }And, of course, you can create a dialogListener, popupFetchListener, and popupCancelListener in your backign bean to handle any actions you need to accomplish.
    public void newDialogListener(DialogEvent dialogEvent) {
            if (dialogEvent.getOutcome().name().equals("yes")) {
        }

  • HFM icons,explore option and Financial Reporting option missing from Workspace 11.1.2.1

    Hi,
    We finished installing and configuring hyperion 11.1.2.1. We noticed unusual behavior in Workspace, All the HFM icons are missing from the menu , it is showing some hfm path. Explore option and financial reporting options are also missing from the Preferences and workspace. Can you please advice what could be causing this issue ?
    Regards,
    Andy

    Hi Thanos,
    Thanks for the reply. Actually i tried to login to HFM client but it says application not registered. So when i tried to register it from workspace, it gives error.  I have already configured all the components but i didn't reconfigure Foundation web server after every component. Is it okay if i do it now when all the components  are already configured ? Or do you suggest reconfiguring all the components again followed by Foundation web server ?
    Also do you think it will help me get explore option in the workspace ?
    Kindly advice. Appreciate your help.
    Regards,
    Andy

  • "Preferred Network" option missing from Airport tab

    My computer was just joining networks, so I switched my MPB to "By Default, Join: A specific network". Now I find that I've got to tell my computer to join the wireless network at work. Since I'd like my computer to join both my home networks without interaction from me I read the help file to figure out how to do it. The help file said to choose "Preferred Networks" from the "By Default, Join:" popup menu, but the popup menu on my computer only had one choice, "A specific network".
    Anyone know what might have happened to the other options in that popup menu?
    Thanks,
    Chris

    Replying to my own post, bad form...
    I don't know why "Preferred Networks" was missing from my "By Default, Join:" menu, but I discovered that I could get the option back by creating a new location and migrating my old settings to the new location.
    Chris

  • MPEG-2 option missing from Adobe Media Encoder (ver7.2.0.43)

    Hi all,
    Having an issue getting the MPEG-2 option for our Creative Cloud installation, specifically in Media Encoder's presets.
    The following steps were recommended on another Adobe forum addressing this issue:
    1.Uninstall Adobe Premiere Pro or the Creative Suite.
    2.Run the cleanup script found here: http://www.adobe.com/support/contact/cscleanertool.html
    3.Reinstall Adobe Premiere Pro or the Creative Suite.
    4.Launch Adobe Premiere Pro.
    5.When prompted for activation during launch, ensure that the computer is online and complete activation.
    If the computer cannot be brought online, complete the offline activation during the first launch of the software. Do not choose to activate later.
    6.After Activation, close and restart Adobe Premiere Pro.
    We have been able to run through steps1 to 4, however the Activation option in #5 does not appear at all (must be activation is included as part of our CC license).
    Without the option to deactivate/activate Premiere how can we go about getting the MPEG-2 option to appear?
    Thanks again

    Hi Jim,
    I'm having the same problem of the mpeg 2 codecs missing from adobe media encoder.  I have 2 computers and on both of them the mpeg 2 options for encoding have disappeared today.  Can you please help? 

  • Where is the 'show in finder' option?

    iPhoto had a quick option to reveal the location of the original file in Finder.  Where is this option in the new 'Photos' app?

    iPhoto had a quick option to reveal the location of the original file in Finder.  Where is this option in the new 'Photos' app?
    Show in Finder  is now only available, if the originals are not stored inside the Photos Library. You can only reveal originals, that you imported as referenced files, and left in their original location. Photos, that are managed inside the library can no longer be revealed.

  • Aperture 3 save PDF to folder as JPEG option missing from PDF services?

    I have Aperture 3 downloaded from the App store in a MAC OSX 10.6.7 but the save PDF to folder as jPEG option is missing from the print menu? I do not have discs to re-install Aperture so can I add a workflow directly to the PDF services library and if so where can I get a copy of this workflow?

    Hi frank, thanks for the advice, I am very new to Apple and Aperture. I think I am looking at the second print menu, I am basically trying to add text to a phot and have followed this online guide
    http://photo.rwboyer.com/2010/02/07/aperture-book-tool-screen-cast-take-two/
    I can do everything except the last part which is save PDF to folder as JPEG. My version of aperture does not give me this option and I only have access to the following:
    Open PDF in preview
    Save as PDF
    Save as Post Script
    Mail PDF
    Save as PDF-X
    Save PDF to iPhoto
    Save PDF to web receipts folder
    Pictures
    Edit Menu
    There is no option to Save PDF to folder as JPEG and I cannot add this function from the Edit menu? Previous discussions suggest re-installing Aperture 3 but I downloaded this from the App store so do not have discs to reinstall?
    Thanks
    Mike

Maybe you are looking for

  • Can Cold Fusion work on RHEL3 64-bit?  I can't get it working

    Please help. even -platformWarnOnly doesn't help me.

  • Can't get 2164 pictures off iPhone

    At this point I have 2164 pictures I've taken with my iPhone, but I can't get a single photo off the phone via the USB connection (I can email a few, but this is not only extremely time consuming, but not very practical) and I need to get a few hundr

  • How can i sort PDF's on IBook with the name that starting with numbers

    i import a number of pdf's representing ameeting agenda as the files names (1xxx,1.1xxxx, 2.xxxx,10.xxxx) on ibook , however the files sorted on a diffrent way as file start with 10 on first . so how can i sor the files on the IBook  with its name st

  • Valuation area in F107 Valuation Run Problem

    I'm trying out 1 exercise in AC010 course to perform valuation run F107 for customers and I found the below problem and cannot be resolved in IDES ECC6. I have a customer using Value Adjustment Key AB. My valuation area used is US as per the exercise

  • Taps issue

    I have taps working ok, can dial RP and TAPS answers, what I am trying to do and have done many times is have a CSS with a single partition that point to a translation pattern which then only dials the taps RP, this is the part that is not working, I