Show Incorrect Answers Upon Review

Can you set Captivate 8 to show incorrect answers upon review? It is showing correct answers but I can't figure out how to make it show incorrect answers too.

By default Captivate will show both correctly answered questions and incorrectly answered questions.
There is no 'option' to show ONLY one or the other during review. You would need to set up user variables for each question slide to track whether it was answered correctly or not and then check these user variables with conditional actions ON SLIDE ENTER of the question slides when in Review Mode. There is a system variable you can use to check for Review Mode.

Similar Messages

Show Incorrect Answers Only on Review Quiz

Is there a way to show only the incorrect answers that the learner selected after clicking on the Review Quiz button? Basically I don't want the correct answers shown.

Which version are you using? If it is version 5 or before, you can just delete that part of the Review messages
Tried it with CP5.5 as well, but there this is not functional,
Lilybiri

Quiz not advancing after incorrect answer (quiz uses user variables to show wrong answers)

Hello All,
Long time lurker, first time poster. Hopefully someone can help me.
After viewing this excellent video on the adobe captivate blog "so what were the right answers anyway" I created a quiz with user variables and a conditional advance action. It displays red crosses next to the each question that was incorrectly answered at the end of the quiz.
I set up user variable for each question with a value of 0. On an incorrect answer the variable would be set to 1.
At the end of the quiz is a slide which lists the question and shows a red cross next to each question with a variable set to 1. uses conditional action which is triggered "On Enter"
This works, but my problem is when I preview the quiz (in browser or as SWF), on an incorrect answer the failure caption appears but will not actually advance to the next question when I click anywhere or press y. It works OK on correct answers.
I can sovle this by adding a next button, but I want to understand what I'm doing wrong.
Using captivate 6.0.1.240 (boxed copy)
windows 7
images on quiz properties and conditional action below
Any help appreciated.
Regards
Jacob C

I tested this work flow on 6.1.319 and it works fine. So it is a bit guessing in the wild... no 6.0.1.240 around for the moment. Seems strange, because a simple action like your Assign action should normally release the playhead. But of course it is a question slide and they do not always behave as expected. Could you try to replace the Assign action by a standard advanced action with 2 statements, like this:
Assign var_question_1 with 1
Continue
And please, let me know if it works? This could be a difference between the two versions, but not sure at all.
Lilybiri

Fill-the-gap with multiple gaps - show right answers colored

Hello,
I'm using CP5 on OSX 10.6.4
I create a quiz "fill-the-gap" with multiple gaps (textfields/drop-down menu) in a single slide.
When a user doesn't fill all gaps he get the info, that he have to fill all gaps. O.K.
When he fills wrong answers he get the info, that it is not correct. But he can't see, which answers are right answers.
Has CP5 (i.e with a variable) the feature to color right answers (i.e the font turns to green) others turns to red?
Or right answers turns to non-editable textfields or drop-downs aren't available after setting the right answer.
Ishan

Hello,
I never used CP5 on Mac, just on Windows. So I'm not totally sure my answers will apply.
About your question to see the right answers: normally this will be done during Review, provided you did allow Review in the Quiz Settings (Allow the user to review the Quiz). You can see the message that will be showed when selecting the Review area on the stage and looking at the Properties. The messages can be edited. In the screenshot you see the default messages. For an incorrect answer both the given answer ('Your answer:...') and the correct answer will be put in the Review area during review.
For your second questions: as far as I know, this is not possible with the default dropdown list of the Question slide for 'Fill-in-the-Blank'. It could be made possible by constructing your own Question slide, using the available objects, user variables and advanced actions.
Lilybiri

Creative Zen (16GB Model) showing incorrect song information

<Creative Zen (6GB Model) showing incorrect song information I was given a Creative Zen for christmas, and I'm very happy with it.
The only thing is, I've noticed that it seems to occasionally display the wrong title for the song it's playing. I have a playlist called RandomAll which I created using the Media Explorer software. Sometimes, when I look down at the player, I'll notice the wrong song information on screen. Not just the title or anything, but completely wrong information. For example, right now, my player is telling my that a Rihanna song is playing, and gives me all the details for that song (including the extended details if I go into the menu). But the song that's actually playing is a cover of Fraggle Rock by Me First & The Gimme Gimmes. It doesn't seem to be the same songs every time or anything like that, so I don't think it's a problem with the files.
Is this an issue that has been noticed by anyone else? Is there anything I can do to fix it's And if not, is it the kind of thing I need to send my player back for?

@ It could be incorrect ID3 tags on your .mp3s, if the source for your music had the wrong ID3 information, your Zen won't show the correct information unless you use an? ID3 Tag Editor to correct the source.

From line on emails shows incorrectly

i belong to a group where i must send an email to the entire group at once, because it is a group mail it will also come to my inbox. the problem is the "from" line shows someone else's email, when i send the same email from my other email client the "from" line shows my email as it should... i have screenshots of both clients... the thunderbird one shows incorrectly. i have contacted the group owner and my emails are not moderated and my email shows as sender on her end.
why is my thunderbird showing the incorrect email in the "from" line... it is a valid email but it is not mine
is there a way for me to post screenshots to explain better?

lets test that shall we.
Tools menu > options > Advanced > Reading and display and uncheck the "Show only display name for people in my address book" restart Thunderbird
Does that fix the display issue?

Macbook pro shows incorrect storage information on SSD.

I am using a macbook pro. The storage information is shown wrongly. Control I shows the correct information but finder and space bar on the hard disk show incorrect storage information. Used space is actually 122 GB which is shown as 140 GB. Even omnidiskkeeper shows the breakup of 122 GB but the storage information summary shows 140GB.

   Re-index Macintosh HD.
   Spotlight reindexing will take a while to finish.
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

Crystal report showing Incorrect data against Bex Query

I have created Crystal report on top of Bex Query, I have not done any calculations in the report, just dragging structure and key figure in the report, ran for one month, when I compare with Bex Query with same period, it is showing incorrect data.
I don't know what can be wrong here?
We are Business Objects 3.1 SP3.
Thanks,
Ravi

HI,
I would suggest you trace the workflow in Web INtelligence according to these notes:
Tracing:
Unix : Note 1235111
Windows : Note 1260004
and then post a link for downloading the trace files here.
regards
Ingo

Customer age analysis showing incorrect aging

Hi All
We have a rather complicated scenario, we captured journals for customers some of the journals are back dated , so when we check the aging it has incorrect info on some of the suppliers and others are showing correct info.
I've checked the payment terms and they are set to 30 days (start from month end + 1 Month)
Others are showing correct figures under correct columns and others are showing incorrect instead of showing under 0 -30 (correct) and then the others are showing 31 - 60..(incorrect)... they both belong to the same posting month.
Regards
Bongani Dlamini

Hi Bongani Dlamini,
Your question is not very clear to me. Which customers are showing incorrect figures? Any patterns have you notices? What are the differences you could find it out?
Thanks,
Gordon

T42 Showing Incorrect Adapter Name in Access Connections

I am working on a T42 laptop and installed Access Connections 5.12. I have gone through and did all the prerequisites prior to installation of Access Connections (wireless driver update, UltraNav Driver upgrade, Video Upgrade, BIOS upgrade, LAN driver update, etc). I have created a profile for a wireless network that is in range and operational. My problem is the adapter is showing incorrectly within Access Connections. This wireless adapter is identified correctly in device manager as "11b/g Wireless LAN Mini PCI Adapter". But in Access Connections, it is showing as "Intel(R) WiFi Link 5300 AGN". I am needing this to identify the correct adapter to get Access Connections to work. Any ideas?

Hi jeremieolson,
Unless you need to use Access Connections to switch among multiple *wired* networks, I'd suggest simply un-installing Access Connections and using the built-in Windows tools for establishing your wireless connection. Windows will let you establish wireless profiles just like Access Connections does. AFAIK Access Connections doesn't add anything to the built-in Windows wireless networking, and in your case it's misbehaving, so...
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

Widget world clock shows incorrect time

widget world clock shows incorrect time.. how can i fix this?

There are two possibilities: (1) your computer's time is wrong. Open System Preferences, select the Date & Time tab, and either set the time manually or select a time server. If you choose the time server click on the Time Zone tab and choose your correct time zone. (2) click on the i on the World Clock widget and select a city near you (that's in the same time zone as yours.)

Report Viewer shows incorrect data when viewing pages from last to first

Post Author: Fmorales
CA Forum: .NET
Hello.
I've made a huge report with Crystal Reports for Visual Studio 2005, and sometimes the Report Viewer show data with errors.
If I see all pages of my report in order, 1 first, then 2nd, 3, 4... until the last one.... The report is always correct.
If I see all pages in reverse order, 1 first (shown by default), then last one, then last one-1.... until 2nd.. All years show incorrect, except first one...
In an outer section, for every year, there is a final row which shows summarize calculated data. The error consists in that every value of the row is 0.
It seems that Crystal Report calculates while showing, that's good.. but... Why does it ignore the data before when I see directly the last page?? It forces me to see all pages one by one in ascendant order to ensure data is correct.. I must fix that error.
The way I calculate data in the problematic summarize row is a bit complicated, but I'll try... Let's focus in one only column (the other ones are similar). The summarize value is a formula which simply show a global value :
WhilePrintingRecords;
CurrencyVar margenActual;
which is being increasing or decreasing along the group:
WhilePrintingRecords;
CurrencyVar actual:=actual+CurrentFieldValue;
if {PresupPeriodifMesesAux_DS.TIPO} = 'PAGOS' then CurrencyVar margenActual:=margenActual-CurrentFieldValueelse CurrencyVar margenActual:=margenActual+CurrentFieldValue;
DefaultAttribute
It is placed in the backgrond property of a CrossTab cell in a hidden pre-section... Well.. I know it's a bit complicated, but I have to do that way because it was the only trick I found to make a summarize file before printing data summarized (that's why the line "CurrencyVar actual:=actual+CurrentFieldValue;" appeared in formula). So I also wanted to use this formula to acummulate "margenActual".
In the inner section I reset the actual value (this value always go fine):
WhilePrintingRecords;
CurrencyVar actual:=0;
Before end of year I reset the margenActual value:
WhilePrintingRecords;
CurrencyVar margenActual:=0;
I've tried multiple combinations (using WhileReadingRecords instead WhilePrintingRecords) but data is incorrect or I cannot get rid of visualization page's problem....
Any idea?
Thanks a lot

quote:
Originally posted by:
ntsiii
If you were previously using <mxXML> you WERE using
e4x.
So remove that tag, create an instance variable of the same
name, typed as xml, and in your result handler, do as VarioPegged
suggests, though I would cast/convert to xml first:
companies = XML(event.result);
trace(companies.toXMLString()); to look at your xml
var xlCompanies:XMLList = xmlCompanies..company; //all such
expressions return XMLList, never XML
trace(xmlCompanies.length()); //
Tracy
Ok so the ID of the mxXML was being interpreted as an E4X
variable at compile time?
I tried changing the name of the ID of the HTTPService call
from "marketData" to "MDATA" and assigning the variable marketData
to the result of the HTTPService query, which if I understand you
correctly should basically make everything work as it was before,
but it seems to be a problem.
when I try to run it puts an exclamation point on this line
<toolbox:TreeMap id="treeMap" width="1200" height="800"
dataProvider="{marketData}"
labelField="@cname" weightField="@amount"
colorFunction="{itemToColor}"
toolTipFunction="{itemToToolTip}"/>
That code refers to a SWC file. Apparently it wants
marketData to be a data provider. If I change the dataProvider
reference above to "MDATA" (the ID of the HTTPService) the App
compiles, but I get two errors at runtime:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
ReferenceError: Error #1081: Property @age1 not found on
mx.rpc.http.mxml.HTTPService and there is no default value.
What should I change this reference to? It won't compile if I
use the variable I made for the e4x results and it is reading
gibberish if I have it read directly from the
HTTPService....?

Ix2 shows incorrect file size

The file system appears to report the incorrect file size for files >4g.
sftp> ls -la
drwxrwxrwx    2 shane    users          61 Sep 7 12:29 .
drwxrwxrwx    8 99       users        4096 Sep 6 23:33 ..
-rw-rw-rw-    1 shane    users    284716889 Sep 7 13:02 KIdsFirstVacation2007.mp4
If you use a ls -lah command it shows correctly
sftp> ls -lah
drwxrwxrwx    0 1000     100           61B Sep 7 07:29 .
drwxrwxrwx    0 99       100          4.0K Sep 6 18:33 ..
-rw-rw-rw-    0 1000     100          4.3G Sep 7 08:02 KIdsFirstVacation2007.mp4
it also shows incorrectly from Filezilla, and from the web browser interface on the NAS

Hi
Today is your lucky day dude. Seems I found a solution :D
Pelase take a look into this forum thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19974&messageID=73284
The user JayJay has provided a link to the Toshiba document which helps to clear this issue.
This is the original document;
http://support.toshiba-tro.de/kb0/TSB59014X0000R01.htm
Please try it and post back if it was the key or not. Good luck

Setting incorrect answers on a customised quiz

Hi there.
I'm setting up a customised quiz (not using question slides) and was wondering how you set the correct/incorrect answers. What I've done so far is included all answers in the quiz (via the reporting section), but only set the right answer to "Add to total". This seems to work, as I get the correct scores at the end of the quiz, but when looking at my LMS reports it's counting all answers as "Correct", even when answered incorrectly.
Any idea if this to do with the Captivate settings or the LMS settings?
The LMS I'm using is a customised one built for the company I work for using a Joomla template.
Thanks.

Hi Lilybiri.
Thanks for the response. To explain further...
This is what I'm seeing on my LMS report (this is an example for one question)
As you can see the result of the question is showing as "correct", but it was actually answered incorrectly. It's a multiple choice question using click boxes. For the correct clickbox I've got these settings:
The wrong clickboxes have these settings:
I've also tried unticking the "Include in quiz" box, and only having the "Add to total" box unticked, but my LMS still tells me it was answered correctly when answered incorrectly.
Any thoughts on why this is happening?

ITunes 6.0.2 shows incorrect track lengths, clips track when playing

I just upgraded to iTunes 6.0.2. In previous versions, iTunes would often show incorrect track lengths on longer tracks, but would play them all the way through, with the time remaining staying at 0:00 until the track finished playing. This new version simply cuts the track off at the incorrect endtime. For example, I have a track with a length of 17:33, but iTunes has always shown it as 17:28. No big deal, it would always play to the end. Now, the new version cuts it off abruptly at 17:28. There seems to be no way to correct the track length. Is there any way to fix the track lengths to their correct times, or get them to at least play all the way through?? These are custom mixes and not from commercial CDs, so simply re-ripping isn't an option.
Snow iMac G3 500 MHz Mac OS X (10.4.4) 384 MB RAM

I have recently accused Emusic.com of supplying truncated tracks only to find that Itunes 6.02 and 6.03 (Mac) is clipping the start and end of the tracks. The counter gives the correct length but the playing is not correct. Fade out / in are off. Playing the offending tracks in quicktime or any other player gives all the track music.
Looking deeper shows that the tracks in question are all VBR .mp3 tracks (Variable Bit Rate).
Solutions to date are to either play in another player (not ideal).
Convert the tracks to fixed bit rate .mp3 using the setting nearest to the highest variable bit rate. Amazingly this works even when the conversion is done in Itunes. Your file size should be same or larger to avoid quality loss.
On playing the tracks I have converted the counter in Itunes gives the same reading but the tacks are not truncated.
Some VBR tracks do not seem to have the problem but that is usually because the nature of the track makes it less obvious.
G4 power mac Mac OS X (10.4.5)
G4 power mac Mac OS X (10.4.5)

Show Incorrect Answers Upon Review

Similar Messages

Maybe you are looking for