Show information of a personnel under PERNR in PA30

Hi,
I've created a personnel in PA30, but when I push "Enter" his informations (Name of Employee, Personnel Area, Employee Group and Employee Subgroup)  is don't shown under of a PERNR, I dont know why !!
Have someone any idea ?
Thanks a lot
Best regards
Mustapha

Hi,
I found the solution :
Configuration tabel is- V_T588I where we can do this settings.
1. Screen hearder to be selected on the basis of Header ID.. Each infotype has assigned a header id tabel-T582A.
2. Transaction Class- A for applicant screen and B for master data.
3. Header Modifer.
U can configure below tabel in tabel- V_T588I
00 A 60
Best regards
Mustapha

Similar Messages

  • Show information in log file under Vivado 2015.1?

    In XST and in Vivado through 2014.4 I used something like:
      assert false report "FFV_D sees KEEP_HIERARCHY: " & Value(KeepHierarchy) severity NOTE;
    to figure out what was going on in Vivado during synthesis.
    With Vivado 2015.1, instead of the report from the constant condition assert statement, I now get:
      WARNING: [Synth 8-312] ignoring unsynthesizable construct: assertion statement [h:/Eng/MVhdl/Src/Base/MReg.vhd:1731]
    Is there some other means to write report information into the Vivado log during synthesis?
    I most use this so that I can verify the state of generics within entities, but I use the mechanism all the time for debugging synthesis.
    Ian Lewis
    www.mstarlabs.com
     

    Hello Brian,
    I certainly hope that Vivado has some means of reporting from within HDL.
    I agree that removing static condition assert support is a horrible idea, especially since the Vivado synthesis log does not provide even as good information as XST did: http://forums.xilinx.com/t5/Synthesis/Requests-for-Vivado-synthesis-log-changes/td-p/590481 . Or, at least, I cannot interpret the Vivado synthesis log at all well.
    I have not yet read enough copies of the log for different conditions to be sure that it is fundamentally unclear, but more and more it looks to me like it just does not include enough information for anyone to know exactly what Vivado has done with respect to generic bindings for specific instances. I know it does not include enough information to even have a clue what it has done with respect to applying attributes.
    In any case, even if Vivado synthesis provided a perfect and complete implementation of VHDL, and its log contained every bit of information one could imagine wanting to show how it binds entities and generics, it is essential to be able to see what the compiler is really doing at the level of one's own code: you can read the LRM until you are blue, but at some point you need to see what is really happening in a specific instance of code.
    And, there is good reason to report into the log some facts about how one configured an entity at a higher level than the individual generics so you can quickly see that you did what you intended to do.
    I could live with changing our asserts to something else, but some means to report into the log is important. It is not just some whim.
    Ian Lewis
    www.mstarlabs.com
     

  • I have an app that does not show up on the left under iTunes.  How do I delete it?

    I have an app that does not show up on the left under iTunes.  How do I delete it from my Iphone 5?

    If the icon exists on your screen, just do a long press on that icon and when the small X appears on top of the app, press it and it will delete it.  As long as this is not an Apple app, since those cannot be deleted.

  • Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

    Ive changed my apple id. in my iPad and iPhone under iTunes it's showing the new id but under iCloud still shows old I'd. I have been told to delete account and add in new one but worried in case lose all my stuff that's already saved in iCloud. any idea?

    If all you did was rename your ID, you can go to Settings>iCloud, tap Delete Account, choose Delete from My iPhone when prompted, then sign back in with your renamed ID.  Deleting the account only deletes the account and any data you are syncing with iCloud from your phone, not from iCloud.  Provided you are signing back into the same account and not changing accounts, your data will be synced back to your phone when you sign back in.
    If, however, you are changing to a new account with a new ID, choose Keep on My iPhone when prompted.  Then choose Merge when you sign into the new account and turn your iCloud syncing back on to upload your data to the new account.
    Before deleting the account, save you photo stream photos to your camera roll (tap Edit, tap all the photos, tap Share, tap Save to Camera Roll).

  • I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown. Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching f

    I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
    Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
    Prior to updating to iOs 6.3.1 my system worked perfectly.
    Can anybody help please.

    1. Turn off router for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • My wireless adapter is not showing in my device manager under network adaptors

    I have a Pavilion, model p6210f with Windows 7
    I have used it for 2 years with an ethernet cable and now I need it to go wireless, however, no wireless adpater is showing in the device manager under network adaptors, only showing the LAN.
    Checking the specifications for this model at the hp website, it should have a 56K Win Modem.  
    Don't know what to do except go buy a USB Wireless adaptor, any ideas?
    Called tech support, but I was given no assistance.

    Hi:
    Below is the link to the product specs for your PC.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01852858&tmp_task=prodinfoCategory&cc=us&dlc=en...
    The PC does not come with wireless networking capability - only a wired ethernet adapter and a dial up modem.
    The easiest thing to do is to purchase and external USB wireless network adapter.
    Below is a link which will give you plenty of choices to consider. Look at the reviews and buy one that best suits your needs. You will of course, also need a wireless networking router.
    http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&N=100006519&isNodeI...

  • I've been recieving text messages on my Iphone 4s, but the phone number is not showing up on my bill under the message logs.  Anyone know why??

    I've been receiving text messages on my phone, but for some reason the phone number is not showing up on my bill under the message log.  Does anyone know why?

        donnagman,
    Thanks for the details. All numbers should show up in the message history log, unless you are communicating via iMessage. When texting the numbers that are missing in the message log are you using your normal messaging app on the device or a downloaded app? Have the numbers that are missing been shown in your message log before?
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • Sharing common unique field personnel number(PERNR) between two WDAs

    Dear All,
    I am new to webdynpro for ABAP.I have developed two individual webdynpro applications by hard coding unique field personnel Id in the select queries.
    What I mean is I am getting all the fields from the select query and I am able to display the values on screen, I am writing query like
    "select required-fields from table1 into table2 where pernr = '000000'".
    I need to import common personnel Id(pernr) from one application to another.This can be achieved in portal integration or It can achieved
    during individual web dynpro applications development?.Please suggest.
    Thanks,
    Reddy

    Hi Reddy,
    You should do this at the application development level. As these two applications are dependent so you can transfer the PERNR field as a context attribute in the Component Interface Controller. This way you can transfer the value.
    There is very good blog that you can refer to work with component interface. See this [blog|http://www.riyaz.net/blog/getting-started-with-web-dynpro-for-abap-part-iii/technology/sap/523/]
    Regards
    Abhinav Sharma

  • Example CODE to show information on URLs

    import java.awt.Dimension;
    import javax.swing.JOptionPane;
    import javax.swing.JEditorPane;
    import javax.swing.JScrollPane;
    import java.net.URL;
    import java.net.URLConnection;
    import java.util.Date;
    import java.util.Iterator;
    /** Accepts an URL and dumps information relevant to it.
    Does not attempt to display the actual content.
    Note the response codes carefully.
    E.G. If an URL's has a response code of '403 Forbidden',
    this means the URL is not allowed, either for general
    browsing, or more specifically, to connections that
    identify themselves as 'bot'.
    For more information on response codes, see
    http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
    @version 1.0 2006/12/06 */
    public class ShowHeaders {
      public static void main(String[] args) {
        String address = null;
        if (args.length==0) {
          address = JOptionPane.showInputDialog(
            null,
            "Show information for which URL?");
        } else {
          address = args[0];
        JEditorPane jep =  new JEditorPane();
        try {
          URL url = new URL(address);
          URLConnection urlc = url.openConnection();
          urlc.setRequestProperty("user-agent", "bot");
          StringBuffer sb = new StringBuffer();
          // show the URL/address
          sb.append( "URL: \t" + url  );
          /** Show the reported content-type.
          Some common content types..
          HTML - text/html
          JNLP - application/x-java-jnlp-file
          ZIP  - application/zip */
          sb.append( "\n\ncontent-type: \t" +
            urlc.getContentType()  );
          // display dates..
          sb.append( "\n\nDate: \t" +
            new Date(urlc.getDate())  );
          sb.append( "\nExpires: \t" +
            new Date(urlc.getExpiration())  );
          // display user interaction params.
          sb.append( "\n\nAllow User Interaction: \t" +
            urlc.getAllowUserInteraction()  );
          sb.append( "\nDefault Allow Interaction: \t" +
            urlc.getDefaultAllowUserInteraction()  );
          /** add the encoding and length
          (often not available) */
          sb.append( "\n\nEncoding: \t" +
            urlc.getContentEncoding()  );
          sb.append( "\nLength: \t" +
            urlc.getContentLength()  );
          // dump the header fields
          sb.append( "\n\nHeader Fields:" );
          Iterator it = urlc.getHeaderFields().
            values().iterator();
          while ( it.hasNext() ) {
            sb.append("\n" + it.next());
          jep.setText( sb.toString() );
        } catch(Exception e) {
          // tell the user what went wrong
          jep.setText( "URL: \t'" + address + "'\n\n" +
            e.toString() );
        JScrollPane jsp = new JScrollPane(jep);
        jsp.setPreferredSize(new Dimension(500,300));
        JOptionPane.showMessageDialog(
          null,
          jsp,
          "Information on the URL",
          JOptionPane.INFORMATION_MESSAGE);
    }Example useage;C:\showheader>javac ShowHeaders.java
    C:\showheader>java ShowHeaders http://www.physci.org/pc/jtest.jnlp
    C:\showheader>java ShowHeaders http://java.sun.com/
    C:\showheader>rem: prompt user for an URL
    C:\showheader>java ShowHeadersHTH (anybody)

    Yes. My apologies for forgetting to mention, it
    is just example code that others may find useful.
    I like to have 'copies' of any handy little utils,
    'stewn about the place' as well, in case I need
    them while away from my PC.
    ..Or to link to them for the benefit of others.
    "check the content type with the code shown here.."
    This is one way to get a (pretty!) version of it.. ;-)

  • Podcast metadata and show information just won't update

    The metadata and show information for my current podcast simply won't update on iTunes. Information such as author, category, subtitle won't up and as of this week the number of included episodes won't change no matter what changes we make from within our Wordpress site or directly to our feed.  Can anyone spot what we might be doing wrong?  Has anyone encountered this issue before?
    We've were new and noteworthy in Comedy for two months, which was great... but we're not actually that funny!
    Thanks a lot!
    Feed: http://oddpodcast.com/feed/podcast
    iTunes: https://itunes.apple.com/gb/podcast/the-odditorium/id961676664?mt=2&ign-mpt=uo%3 D4

    In fact the Store is using the feed at http://feeds.feedburner.com/oddpodcast/yItF
    This matches what's in the Store and when subscribing - the main Description on the Store page is drawn fro the 'itunes:summary' tag and matches it. The same ten episodes which are in this feed appear in the Store. The feed at the URL you quote has one further episode, earlier than the others at January 23rd, so its not being in the Feedburner feed may be something to do with the Feedburner settings limiting the number of episodes. Otherwise the feeds seem to be identical (I haven't checked them in detail) and match what's in the Store.
    If something isn't matching your expectations please describe exactly what it is.

  • My preferences are set to 'show informational overlay' but when I scroll through events I do not see the date as I'm supposed to. I only see the date underneath the event. What am i doing wrong?

    I so not see the date as I scroll through my events and I have my preferences set to 'show informational overlay'. They only date I see is below the event. What am I doing wrong?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • Can't see any folder of music/movie/tv show on the left side under decive department

    Hi, why I can't see the Music/Movie/Tv show on the left side under the devicedepart ment when I connect my Ipad with the PC? Even though I still see the ipad under the device, but I can't click on it to see the other folders (music/movie/Tv show)

    Gail Burt wrote:
    that grey, glass-tv-screen-looking icon
    Do you mean like this?
    I'm not an expert on this but I get these files now and again with my job where clients upload fonts to our FTP from a PC. These are files that OS X doesn't recognize or doesn't have the software to open it. It's probably because your drive was formatted for PC. Do the iPod video files have a file extension at the end of the filenames such as .mp4 or .mpeg (or whatever the correct extension is for iPod video, mp4 I think)? If not and in my experience, adding the correct extension to the file usually enables OS X to recognise and open the file. Try it with one of your files and see if it opens.

  • Podcast Show Information and Image

    When I submitted my podcast to Itunes, there was not a place to include an image. I have gone to feedburner and set up the smartcast with the image and show information. I still have no information or image showing up in my podcast. I would like for it to show up. What do I need to do? Any place else you can change an image and have instant results. Apple makes this process really difficult.
    http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=289481774

    Same answer as before: To include an image: in the top section of your xml (feed) file, before your get to the first 'item' tag, you need to add:
    <itunes:image href="URL OF AN IMAGE FOR THE PODCAST" />
    Please see this page about publishing podcasts which may help:
    http://www.wilmut.org.uk/pc
    Apple makes this process really difficult.
    If anything it's Feedburner which makes the process difficult. If you have submitted an xml file to Feedburner, it's that you should ideally submit to the iTunes Store: if you let Feedburner submit it there can be problems. However even so if your xml file contains the itunes:image tag as above it should percolate through to the Store. Setting an image directly within Feedburner's web page probably won't get you anywhere.

  • Show information on LCD that uses a VGA connector or cable

    Hello
    I have a MacBook Air with Lyon OS. I have tried to show information on a LCD using the Mini DisplayPort to VGA Adapter, but i can`t. I only can to show power point presentations but excel, word or another information on those formats can´t be shown.
    Why? What can i do?
    Thanks
    Jorge

    Drag those applications off the right side of the MBair screen, they'll appear on the external monitor.
    This is extended desktop mode.
    Review the settings in System Preferences > Displays > Arrangement tab.
    Regards,
    Captfred

  • HT4623 My iphone4 does not show the "software update" choice under General so how can I update to a later version of iOS?

    My iphone4 does not show the "software update" choice under General so how do I update my iOS?

    You can alternatively connect your iPhone to iTunes on your PC and upgrade your iOS from there.

Maybe you are looking for