Show ip arp not populating

Hello
I have a strange issue where a "show ip arp" only populates local addresses but does not populate with addresses learnt on interfaces in that VLAN. For example, vlan 10 has dozens of IP addresses attached on individual access ports. If I ping the broadcast, most of these addresses reply, but if I do "show ip arp" for the mac association, i get nothing.
I am using 3750x with 15.x software.
Can anyone shed any light on this at all? We have other 3750X switches with the same sort of config that are populting the output.
Thanks in advance

Are you sure the VLAN10 interface is up and properly addressed? If it's not in the ARP cache then it may be routing via another L3 switch or route to reach the address. Try doing a traceroute to the IP you expect to see in ARP.
Aaron

Similar Messages

Batch characteristic value not populated!

Hello guys,
please would appreciate advice to following:
I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
Any idea how to populate these chars in batch?
Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
Thanks for prompt replies!
Br, Jan

Hello,
SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
Issue solved using non reference charactereristic and adding code into ZXMBCU04.
Br, Jan

Fields not populated in cube

hi experts,
i have one problem i have sales item,and header dso's which i have loaded the data using flat files.when am trying to load to cube some of the fields of header is not getting populated.when i am loading only header data that time it is showing the data in cube.when i am loading item data also that time some of the fields of header are not populating in cube.i have tried by taking two seperate cubes for header and item and tried to loading data to multiprovider. but same issue came.for ur reference i am providing screen shots of that. this is multi provider screen shot in this u can observe that division ,region and some fields are not populating data. in local sand box i have done this please help me to resolve this issue.
header cube screen shot before loading to multiprovider.
item cube screen shot before loading to multiprovider.
regards
jaswanthi

How are you "loading" to a MultiProvider? A MultiProvider is merely a "view" on 1 or more InfoProviders, nothing gets loaded in it.
The screen shot of your MultiProvider shows data of your items InfoCube only... have you filtered on the InfoProvider field? If not, try and filter on your header InfoCube and see whether it shows any data. If not, then there's something wrong with your mappings in the MultiProvider definition.
It's perfectly normal to have empty fields if you're combining 2 InfoProviders into 1 MultiProvider. If that's not what you want, you should consider an InfoSet (which "joins" data) or model it so that when you're sending item data to a new InfoCube, you "look up" the missing header data in your header data DSO and add it.

Net value in the Invoice not populated correctly

Hi friends,
The net value in the Invoice is not populated correctly. The sales order unit price is say 100/EA and the qty is 10 and the net value is 1000 Rs. THe invoice is also showing up the unit price and qty similar to the sales order but the net value picked is 500Rs. There are no discount conditions as well. What might be the possible reasons for this?
Thanks
Isaac

Hi,
Check whether you have entered th value manually in the sales order and overwritten the condition record value .If so also check you copy control setting in VTFL that pricing type B is maintained at item level for the respective doc type .
It can happen that you have condition record maintained for 50rs per quantity and you have changed price manually in sales order to 100 per qty. Now if in copy control VTFL pricing type B is maintained than system will redetermine the prices at the billing level.
If this is the case than change the settings in VTFL pricing type at item level to D
Please check and revert with your feed back
Regards,
Krishna O

PDF file opening with blank fields - the field values are not populated.

Recently, our users have been facing this issue, "data not populating in the PDF fields".
We are using FDF in PHP to load the PDF templates and apply the data to the PDF fields. This works fine on many adobe versions but showing empty fields in few adobe versions. For e.g It worked fine with Adobe Reader 10.1.3 but did not work in 11.0.
This has been critical now as it is showing empty fields in IE11. Can you please help me overcome this issue.
Thanks!

All I can suggest is to try the latest Reader versions, i.e. 10.1.11 or 11.0.8.

CopyDeliverToOrgId is not populated correctly when checkout PR in iPro

When we check out the Requisition in iProcurement, the system shows error for the Deliver-To Location, the error is 'Select a Valid Value'. After we click on the LOV and select the same value as in the Deliver-To Location field , the error gone.
Setp.
1. Select item and add to cart
2. Click View Cart and Check Out
3. Click Checkout
4. Click Next (at this point the Deliver-To Location values is PWH-MB-03-TA)
5. Error out 'Select a Valid Value'
6. Click LOV and select PWH-MB-03-TA from the LOV
7. Clikc Next again
8. Success
Do anyone knows why I have to reselect the value every time I check the requisition
One of the metalink note mention that the variable copyDeliverToOrgId is not populated correctly.
Thanks in advance for the help
Lawrence

Is any personalization already exists , some like it will be based on OU with certain location ..
In my case , it was to enter correct Deliver to location was based on requestor -location combination based on OU.
otherwise check for Profile 'POR : Preferences - Deliver to Location' in system admin ,
select * from fnd_profile_options_tl
where profile_option_name = 'POR_DEFAULT_DELIVER_TO_LOCATION_ID'
and language='US'
Regards,
Ashish

Cost of goods not populating

hello while doing billing cost of goods is not populating ,the unit amount appears but the condition base value which is the quantity itself is coming as zero for some items ,but the quatity is not zero then why it is showing as zero in condition base value
which is making my unit amount * zero as zero value for cost of goods

Hi vipin
In third party process, the Cost of Goods sold wont get updated . But you can see the raw materials getting updated in MIGO
As the goods are getting shipped by the third party you cant see the final product Cost of Goods sold
Regards
Srinath

Secess amount is not populating

dear users,
when i try to capture the excise invoice using J1IEX,
secess amount is not populated in the filed. its showing blank field and the rest fields like BED, AED, ECS are populating with correct amounts..
could any one can give the possible solution to fix this problem..
regards,
Manu,

Hi,
Do maintain condition records for secess ie JSEP in fv11T-code for your taxcode.
BR
Raj

Converted key figures not populating

Hi Experts,
The query run shows up the converted key figures but the APD is not populating the same, i tried moving the key figures that are not populating in the query around, and it seemed to work in quality, why it is not populating in APD in the production system?

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Life in months is not populating from interface in Mass Additions Post

Hi,
We have one critical issue in FA conversion.We have popultaed the life_in_months in fa_mass_additions table.When we run the Mass Additions Post,it is defaulting the life_in_months from category and not from fa_mass_additions interface table.As per intended functionality,it should populate from interface table.
If any of you encounter the issue,Please let me know the soultinon.
Thnaks
Praveen

>
DATA showing on front end,but it is not populating into base table AP_INVOICE_DISTRIBUTIONS_ALL.
>
Are you saying you can see the distributions from front end but not in the table?
Did you populate the distribution related columns in AP_INVOICE_LINES_INTERFACE (e.g. DIST_CODE_COMBINATION_ID)?
Sandeep Gandhi

PO is not populated to backend system

Hi,
We use Extended Classic Scenario and create a PO from sourcing cockpit.
When we create a PO we get a successful message. PO is created in SRM but is not populated to R/3.
In RZ20 monitor I don't have any message.
Regards,
Pierre

Hi,
If this error is in development/quality system and only with this one PO ?
If yes, then try to create a new PO and look if it shows in R/3.
Next thing, in transaction BBP_PD look for your PO and check for any errors and status of PO.
Regards,
Marcin

Discoverer 4.1.48.08 - Data not populating

Hi All,
I have created a package with few functions, and global variables. I am using one of the function from the package to initialize the values to the global variables, I
have registered the same function in discoverer. I have created a view in which one or more of the where clause is using the values returned by the other functions of the package, the values returned by the functions depends on the parameter for which i am passing through the desktop edition for which i want the report.
Now the concern is that, i am able to see the output of the report for which i am passing the value to the parameter, but in one of the column, the value is not populating, it shows null, then if i press the refresh button again, the value is populating to the column, this is happening for the first time when i log-in and run the report.
What could be the reason, why the value is not populating to the column for the first time, is there any solution?
I want to get rid of pressing the refresh button again.
Note: My view consists of multiple sql qrys using union operator, and each one of the sql qry brings the value to the column using the package functions.
Thanks & Regards,
Vinod S Poal

Hi
The problem i sthat the function in the custom folder evaluated by the Oracle fisrt and after that are evaluated the functions which sets the global variables from the parameters.
So if you open the workbook nothing selected but the global variables has set and the next time you got the result with the previos parameters.
If you change the parameters it wouldn't change the result set only if you refresh it again without changing the parameters.
This is not a good solution for using parameters in custom folders. As I know there is no good solution for this problem yet.
Ott Karesz
http://www.trendo-kft.hu

Why is repeated events not populating correctly?

I am trying to set up a repeating event at icloud.com and it is not populating correctly. I set up a custom repeating event to repeat every two weeks on certain days and it shows up every week regardless that I selected repeat every "2" weeks"

If known-good battery,
& known-good adapter;
check Mag-safe Board.
http://www.ifixit.com/Device/Mac_Laptop
http://www.ifixit.com/Device/Apple_AC_Adapter
Good luck & happy computing!

Lov not populating

Hi all,
I have personalized a iRecruitment page and added a couple of LOV's on that page. However, 1 LOV is not populating i.e. it shows no records. NEbody has ne idea why this is happening. I m a newbie ..pls bear w me

Hi,
get the query executed by LOv from about this page link and pass the parameter you are passing to LOv and then check that query i fetching any record or not, if the same query id fetching the record from TOAd or other client then we can look into this.
Regards,
Reetesh Sharma

MSS Hire form not populating vacancy positions

Hi, recently we have done QA server refresfh activity and taken the replica of Production server. Now the issue is after refresh
1. Hire form not populating vacancy positions from R/3.
2. In MSS Employee search with personal number showing no data found. Could you please suggest?
Thanks in advance.
Regards
Krishna

Hi,
I have investigated further and could find something as below:-
1. There is a standard method DETERMINE_SEARCHHELP from class CL_HRPA_GENERIC_F4 which gets called.
2. Inside this method there is a function module F4IF_DETERMINE_SEARCHHELP which inturn calls function module DD_SHLP_GET_HELPMETHOD. The later function module takes tablename, fieldname, and sy-langu as parameter to give SHLP as search help output. Following values are getting passed to the function module:-
                                     Tablename = HRASR00_HIRE_F4_CORE_FIELDS
                                     Fielname = PLANS
                                     Sy-langu = E (Default)
However this returns parameter SHLP as blank.
There is a subroutine 'shared_buffer_imp_interface' in the function module DD_SHLP_GET_HELPMETHOD which has the following IMPORT statement:-
IMPORT shlp
         callcontrol-attachkind
         timestamp timerelobj_tab
         FROM SHARED BUFFER ddshoffld(if) ID sh_buf_id.
This IMPORT statement is returning sy-subrc EQ 4 and hence finally SHLP does not have any value. So the position dropdown is not populating.
Also when the following parameter is passed, we get F4 help for PERSG (Employee group field):-
                  Tablename = HRASR00_HIRE_F4_CORE_FIELDS
                  Fielname = PERSG
                  Sy-langu = E (Default)
This is because in this case, the above IMPORT statement returns the table T501 and T501T and hence finally SHLP has the value.
Can anyone of you please provide me your expert opinion as to how i can get this working for fieldname = PLANS and hence position dropdown.
Thanks,
Rupesh

Show ip arp not populating

Similar Messages

Maybe you are looking for