Show ip slb stats?

What does all this mean? I'm particularly in the entries which indicates errors:
I looks like a serious problem, with over 100.000 failed connections, in only 700.000 created connections.
Connections Created:        692177
Connections Destroyed:      591523
Connections Current:        100654
Connections Timed-Out:      21192
Connections Failed:         115898
Server initiated Connections:
      Created: 0, Current: 0, Failed: 0
L4 Load-Balanced Decisions: 693066
L4 Rejected Connections:    0
L7 Load-Balanced Decisions: 0
L7 Rejected Connections:
      Total: 0, Parser: 0,
      Reached max parse len: 0, Cookie out of mem: 0,
      Cfg version mismatch: 0, Bad SSL2 format: 0
L4/L7 Rejected Connections:
      No policy: 0, No policy match 0,
      No real: 0, ACL denied 0,
     Server initiated: 0
Checksum Failures:  IP: 0, TCP: 0
Redirect Connections: 0,  Redirect Dropped: 0
FTP/RTSP Connections:            0
MAC Frames:
      Tx: Unicast: 78312749, Multicast: 1455988, Broadcast: 1240,
          Underflow Errors: 0
      Rx: Unicast: 78272614, Multicast: 3911, Broadcast: 1237,
          Overflow Errors: 900, CRC Errors: 0
Best Regards
Henrik Stryhn, Denmark

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
Connections Destroyed:      591523
“The number of TCP and UDP connections destroyed by SLB, either by TCPIP teardown or timeout. UDP connections can only be timed out."
Connections Timed-Out:      21192
                      “UDP connections destroyed as result of timeout”
/nykaer

Similar Messages

  • CAT6500 "show ip slb conn" shows ESTABLISHED after 2nd step in 3-way tcp ha

    Have a CAT-6500 running Version 12.1(8b)E15, EARLY DEPLOYMENT RELEASE SOFTWARE.
    "show ip slb conn" shows sessions in ESTABLISHED state after 2nd step of the
    3-way tcp handshake has been completed. If DoS attack using spoofed IP addresses, third and final ACK packet never arrives. Connection will remain in this state because neither the server nor the client or
    any device in between has a record of this session? Can we change this behavior? Any settings controlling this? real server in farm quickly reaches the MAX threshold setup, in this case 250 connections.

    not sure if the setting can be changed, but Established is IOS SLB TCP connection processed a SYN-SYN/ACK exchange between the client and server.

  • Simple jsp to show if session state is being correctly replicated ?

              Hello,
              I am making a simple jsp to show if session state is being correctly replicated.
              I just remembered seeing one somewhere before.
              It showed the server-name, and the number of request so far in the session. And
              maybe a nice bea logo.
              Does anyone know where such a thing might be available ?
              thanks!
              JM
              

              Hi ,
              checkout bea samples there is such jsp in cluster/sessionrep or something like
              this /bea_home/samples/sever...
              "Marmelstein" <[email protected]> wrote:
              >
              >Hello,
              >I am making a simple jsp to show if session state is being correctly
              >replicated.
              >I just remembered seeing one somewhere before.
              >It showed the server-name, and the number of request so far in the session.
              >And
              >maybe a nice bea logo.
              >Does anyone know where such a thing might be available ?
              >thanks!
              >JM
              

  • Is it possible to have a slide show as one state in a MSO?

    I have a series of states on a page that are triggered by buttons. I  have managed to place one image sequence into one of the states but not a slide show. Anyone know if this is possible?
    Thanks.

    The buttons simply launch one state or another in a MSO (different text boxes with a photo for ex.). I would like one of those states to have text and a slideshow above, but it does not seem to allow me to add the slide show to that state. I can select the state and then select something else (a random box for ex.) and its happy to add it to the state. Select a slide show and it does not allow the add to state function.

  • Summarize your question in a sentencewhen i open a youtube videos it doesnt open and it shows the folloing statement"You need to upgrade your Adobe Flash Player to watch this video. Download it from Adobe."

    when i open a youtube videos it doesnt open and it shows the folloing statement"You need to upgrade your Adobe Flash Player to watch this video. Download it from Adobe."

    Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.
    See:
    * https://support.mozilla.com/kb/Managing+the+Flash+plugin
    * https://support.mozilla.com/kb/Installing+the+Flash+plugin
    * http://kb.mozillazine.org/Flash
    You can get the Adobe Flash Player here:
    * http://get.adobe.com/flashplayer/
    * http://get.adobe.com/flashplayer/otherversions/
    You can visit the Adobe welcome and test page to verify if the installation has been successful.
    * http://www.adobe.com/software/flash/about/

  • A jsp which shows that session state is replicated ?

              Hello,
              I am making a simple jsp to show if session state is being correctly replicated.
              I just remembered seeing one somewhere before.
              It showed the server-name, and the number of request so far in the session. And
              maybe a nice bea logo.
              Does anyone know where such a thing might be available ?
              thanks!
              JM
              

              I thought I included the attachment?!
              "Vijay" <[email protected]> wrote:
              >
              >Hope this helps...
              >
              >G'luck.
              >Vijay
              >
              >"Marmelstein" <[email protected]> wrote:
              >>
              >>Hello,
              >>I am making a simple jsp to show if session state is being correctly
              >>replicated.
              >>I just remembered seeing one somewhere before.
              >>It showed the server-name, and the number of request so far in the session.
              >>And
              >>maybe a nice bea logo.
              >>Does anyone know where such a thing might be available ?
              >>thanks!
              >>JM
              >
              

  • The Fe0/0 on 2801 show some "change state to up"

    hi
    i have an Issue with my cisco 2801.
    in the logs shown me the interface FE0/0 cames up some times but never show the down state, I receive my internet service on this interface but never lost the conection, just this logs information
    Oct 7 18:39:32.412: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 7 18:39:41.448: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 7 21:57:20.775: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 8 02:29:31.350: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 8 02:55:12.362: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 8 13:02:21.824: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 8 13:05:30.076: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 9 01:49:25.864: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 9 01:49:58.616: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 9 01:54:11.708: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 9 03:26:23.080: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 9 05:59:39.519: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 9 11:27:14.246: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    Oct 9 14:59:02.057: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    the IOS Version that is running is
    flash:c2801-adventerprisek9-mz.124-24.T1.bin
    what could be the problem?
    thank you
    Roland

    Hello,
    Any idea how to troubleshoot/resolve this issue? We have a old 2801 which started displaying the same problem and i see both FE0/0, FE0/1 link messages.
    Oct 29 01:28:57.091 PST: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
    .Oct 29 01:29:03.839 PST: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
    .Oct 29 01:29:29.747 PST: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    .Oct 29 01:29:42.283 PST: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
    .Oct 29 01:29:48.923 PST: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
    .Oct 29 01:30:01.343 PST: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up

  • Got action sequence to "loop" but it shows in all states - conditional statement to fix it?

    Using Flash Catalyst & Notepad (to open and alter the code in the "Main" MXML file) I'm able to "loop" an action sequence on the home state for my swf by changing the code as follows:
    ORIGINAL CODE
    <s:Parallel id="Sequence3">
    ALTERED CODE
    <s:Parallel id="Sequence3" effectEnd="Sequence3.play()">
    The desired effect is a sequence (of 4 images) that loops whenever a user is viewing the home state.  It is activated "On Application Start"
    The PROBLEM is that the loop continues in all other states (it appears in the background - behind the objects that are supposed to show up on the other pages and only begins to show up in each state when the sequence begins another loop).
    I am assuming I need a conditional statement --- something along the lines of:
    while (condition){ statements;}
    ...in other words, ONLY while currentstate = "Home" it should loop the sequence. What would be the correct code for this conditional statement and where would the conditional statement be inserted to loop the sequence as desired???  Or... is there another better way??
    My current code for this action sequence is:
    <s:Parallel id="Sequence3" effectEnd="Sequence3.play()">
                <s:Parallel target="{designlayer1}">
                    <s:Fade alphaTo="0" duration="500" startDelay="2100"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage2}">
                    <s:Fade alphaTo="0" startDelay="2100"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage3}">
                    <s:Fade alphaTo="0" startDelay="2100"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage4}">
                    <s:Fade alphaTo="0" startDelay="2100"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage5}">
                    <s:Fade alphaTo="0" startDelay="1650"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage6}">
                    <s:Fade alphaTo="0" startDelay="1800"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage7}">
                    <s:Fade alphaTo="0" startDelay="1950"/>
                </s:Parallel>
                <s:Parallel target="{designlayer5}">
                    <s:Fade alphaFrom="1" alphaTo="0" duration="0" startDelay="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="2650"/>
                    <s:Fade alphaTo="0" startDelay="5300"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage8}">
                    <s:Fade alphaFrom="1" alphaTo="0" duration="0" startDelay="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="2650"/>
                    <s:Fade alphaTo="0" startDelay="5350"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage9}">
                    <s:Fade alphaFrom="1" alphaTo="0" duration="0" startDelay="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="2650"/>
                    <s:Fade alphaTo="0" startDelay="5350"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage10}">
                    <s:Fade alphaFrom="1" alphaTo="0" duration="0" startDelay="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="2650"/>
                    <s:Fade alphaTo="0" startDelay="5350"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage11}">
                    <s:Fade alphaFrom="1" alphaTo="0" duration="0" startDelay="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="2650"/>
                    <s:Fade alphaTo="0" startDelay="4750"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage12}">
                    <s:Fade alphaFrom="1" alphaTo="0" duration="0" startDelay="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="2650"/>
                    <s:Fade alphaTo="0" startDelay="5000"/>
                </s:Parallel>
                <s:Parallel target="{designlayer6}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="5900"/>
                    <s:Fade alphaTo="0" startDelay="7900"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage13}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="5900"/>
                    <s:Fade alphaTo="0" startDelay="7550"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage14}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="5900"/>
                    <s:Fade alphaTo="0" startDelay="7900"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage15}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="5900"/>
                    <s:Fade alphaTo="0" startDelay="7750"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage16}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="5900"/>
                    <s:Fade alphaTo="0" startDelay="7900"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage17}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="5900"/>
                    <s:Fade alphaTo="0" startDelay="7900"/>
                </s:Parallel>
                <s:Parallel target="{designlayer7}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="8500"/>
                    <s:Fade alphaFrom="1" alphaTo="0" startDelay="11000"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage18}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="8500"/>
                    <s:Fade alphaFrom="1" alphaTo="0" startDelay="11000"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage19}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="8500"/>
                    <s:Fade alphaFrom="1" alphaTo="0" startDelay="11000"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage20}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="8500"/>
                    <s:Fade alphaFrom="1" alphaTo="0" startDelay="11000"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage21}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="8500"/>
                    <s:Fade alphaFrom="1" alphaTo="0" startDelay="10650"/>
                </s:Parallel>
                <s:Parallel target="{bitmapimage22}">
                    <s:Fade alphaTo="0" duration="0"/>
                    <s:Fade alphaFrom="0" alphaTo="1" duration="0" startDelay="8500"/>
                    <s:Fade alphaFrom="1" alphaTo="0" startDelay="10800"/>
                </s:Parallel>
            </s:Parallel>
    Thank you!!!!!!!!

    Figured out my issue...
    I had to select each layer for the 4 photo sequence and "Remove From State" for each layer.  If this is done with all layers except the "Home" state, the images show only where appropriate.
    So...   "Loop an action sequence" is really easy.
    I've seen a lot of complaining that "FC can't do it" but with a very simple code mod, I was able to do it WITHOUT using the video timer method.
    I should also mention that I've never worked with Flash at all before this project and am only self-taught in HTML (basics).  I was able to make a pretty good looking Flash component for a web site and never would have attempted it without FC.  I have to say, while FC is a bit limited, GUI-based Flash is a great add for Adobe and will save me over $2k per year in web admin.
    To edit the document in Notepad as mentioned in the first post:
    the full text can be found here http://www.judahfrangipane.com/blog/2010/09/03/flash-catalyst-jailbreak-for-flex-developer s/
    Editing MXML Documents
    To edit your projects MXML documents we first need to find the path to  the Flash Catalyst workspace. To do this publish your Flash Catalyst  project (CMD / CTRL + ENTER). Now, the browsers URL shows the path to  the project workspace. So in this URL,  "file:///Users/judah/Library/Application Support/Adobe/Flash  Catalyst/workspace/Project/bin-debug/Main.html", the project MXML  documents are located at, "file:///Users/monkeypunch/Library/Application  Support/Adobe/Flash Catalyst/workspace/Project/" when on a Mac.
    Flash Catalyst project files
    Project Files Description
    /src - location of the application source files
    /bin - the location of any additional flex libraries
    /bin-debug - location of testing swf
    /html-template - location of the html template that wraps around your application
    /src/Main.mxml - the main application file. make your application changes here
    /src/Main.css - the css stylesheet of the main application
    /src/components - the location of custom components and component skins
    /src/assets/graphics - location of optimized FXG graphic symbols
    /src/assets/images - location of images
    You can edit these XML documents in any text editor. To apply the  changes you need to save the file and refresh the Flash Catalyst  project. You can do this by opening the changed document in Flash  Catalyst code view. When we do this it will recognize the document has  changed and prompt you to use the newer version of the file. Select Yes.  If the project does not rebuild immediately publish it using CMD +  Enter.

  • Most of the triggers in my composition are not showing there active state

    I have a composition with 18 triggers.
    Each trigger has a b/w image that should turn to a colour image when active or rolled over but only the two on the 3rd row work correctly.
    The others do change when rolled over but when I roll off, even when still active they go back to their normal state.
    Also when the composition plays through only the same two triggers will show the correct active state whilst active.
    http://boastassociates08.businesscatalyst.com/projects.html
    this happens in all methods of preview.
    i have checked and all triggers have the correct images on each state.
    Thanks

    I figured it out. all trigger also have a link to another page on the site, all but two anyway.
    so the triggers states are reacting as if it is just a link rather than it being a trigger in a composition.
    does somebody know  a way that will allow me to have the triggers states react the way i want and for the triggers to act as a link?

  • CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9005 in MPControl.log and MP is showing in critical state

    CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9005  error message in mpcontrol.log  and management point showing critical state in Monitoring-Site status
    Please help to resolve the same.

    Based on this thread ---> http://social.technet.microsoft.com/Forums/systemcenter/en-US/f66a8f0f-31df-49b1-b385-450c522aac0f/cmpcontrolmanagerpublishindns-dnsreplacerecordsinset-failed-with-status-9005-getting-this?forum=configmgrinventory
    a possible workaround is:
    1. Start DNS
    2. Navigate to following DNS SRV record: _mssms_mp_<SMS_SiteCode>._tcp.AD_FQDN
    3. Right click on this record; and add all MP Machines Account and provide Full Control permissions on this DNS SRV Record.
    4. Restart "SMS_EXECUTIVE" service on all MPs
    You will then see that each MP will successfully register each DNS SRV records successfully.

  • Init Load showing in yellow state.

    Hi all,
    I am trying to do init for SRM data source to ODS object.
    The init load is showing  yellow state (0-0 records).
    There is no data available in SRM related to this data source.
    Can anyone please tell me why it is in yellow state instead of green.
    Thanks
    S VR.

    Hi S VR,
    In the monitor screen go to the Status Tab > click on the lights next to Total > Make it Red and save > the system will prompt a couple of messages, say Yes to them. Then you can Manual Update. Once all packages are done (green), then again Status tab > click onthe lights next to Total > Delete Statsu; back to request status > Save. The request should now be green.
    else
    try repair full request option it can help you..
    Hope this helps...
    Assign points if helpful...
    Regards,
    NR
    Edited by: N R Pradeep Reddy on Apr 14, 2008 6:14 AM

  • Interface e1000g0 not showing in running state

    Hello all,
    I have a sun server SunOS PNR1RAD01 5.10 Generic_144488-09 sun4v sparc SUNW,Netra-T5220 where i have an interface e100g0.
    This was earlier in running state but now this doesnt show running state. I tried to reset the interface, checked the cable but it did not help.
    Can nyone pls help me on this.
    e1000g0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.200.2.73 netmask fffffff8 broadcast 10.200.2.79
    ether 0:21:28:bd:55:3e

    see the below printout from the system:
    ossuser@PNR1RAD01 # cat hostname.e1000g0
    PNR1RAD01
    ossuser@PNR1RAD01 # cat hostname.e1000g1
    10.200.3.58
    root@PNR1RAD01 # cat /etc/hosts
    # Internet host table
    127.0.0.1 localhost
    ::1 localhost
    10.200.2.73 PNR1RAD01 loghost
    10.200.3.58 PNR1RAD01
    One more observation:
    root@PNR1RAD01 # dladm show-dev
    **e1000g0 link: down speed: 0 Mbps duplex: half**
    e1000g1 link: up speed: 1000 Mbps duplex: full
    e1000g2 link: unknown speed: 0 Mbps duplex: half
    e1000g3 link: unknown speed: 0 Mbps duplex: half

  • Show/Hide Multi State Object

    I can show a multistate object by having a blank state and then going to state 2, but how can I hide this?

    Please download "DPS Tips" on iPad.
    http://itunes.apple.com/us/app/digital-publishing-suite-tips/id436199090?mt=8
    There are 4 Folios in the DPS Tips, and check "button hot spots" in Overlays.
    It will help you, I think.
    shimoawazu

  • Watch/Monitor Buttons do not show the correct state

    I programmed several Watch buttons on SPA500 module and some buttons stay lit red even though the phones are not used.  When pressing the button it does call the Vacant phone.
    How can I fix the state to be correct and only be lit red when the corrsponding phone is used?

    Hi Guys,
    Was this problem ever resolved?
    I am having the same issue. Cisco CME on 2851 router. We have several Cisco 7970 IP Phones all provisioned at the same time, and all working fine. I have a 7914 module monitoring the phones and one is showing as off hook. (BLF -1).
    The phone that is showing offhook is ephone 7, it is being monitored by ephone 4. I have done factory reset, firmware upgrade, reset and everything recommended above but still having the issue. The red light indicates that the phone is offhook or not present although it is cleary registered to the CME.
    You can see from the show ephone register below (ephone 4 is monitoring ephone 7) that ephone 7 is showing as offhook when it is not and is also registered and working. It shows:
    button 33: cw:1 ccw:(0 0)
      dn 22 number 122 CH1   IDLE         CH2   IDLE         watch(BLF on phone -1) shared with monitor-ring
    I have attached config and tftp debug below. If any one can shed some light it would be much appreciated.
    ------------------ show running-config ------------------
    Building configuration...
    Current configuration : 33299 bytes
    ! Last configuration change at 18:09:53 AEST Mon Jun 4 2012
    ! NVRAM config last updated at 18:09:56 AEST Mon Jun 4 2012
    ! NVRAM config last updated at 18:09:56 AEST Mon Jun 4 2012
    version 15.1
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname CISCO
    boot-start-marker
    boot system flash:c2800nm-adventerprisek9-mz.151-4.M1.bin
    boot-end-marker
    card type t1 0 0
    ! card type command needed for slot/vwic-slot 0/1
    enable password
    aaa new-model
    aaa authentication login ciscocp_vpn_xauth_ml_1 local
    aaa authorization exec default local
    aaa authorization network ciscocp_vpn_group_ml_1 local
    aaa session-id common
    clock timezone AEST 10 0
    no network-clock-participate wic 0
    dot11 syslog
    no ip source-route
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 10.0.0.1 10.0.0.199
    ip dhcp pool cisco
    network 10.0.0.0 255.255.255.0
    option 150 ip 10.0.0.1
    default-router 10.0.0.138 10.0.0.1
    dns-server x.x.x.x x.x.x.x
    ip name-server x.x.x.x
    ip name-server x.x.x.x
    no ipv6 cef
    multilink bundle-name authenticated
    password encryption aes
    voice service voip
    ip address trusted list
      ipv4 204.9.161.164
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    supplementary-service h450.12
    no supplementary-service sip moved-temporarily
    no supplementary-service sip refer
    h323
    vpn-group 1
      vpn-gateway 1 http://10.0.0.15
      vpn-trustpoint 1 trustpoint _Certificate leaf
      vpn-hash-algorithm sha-1
    vpn-profile 1
      host-id-check disable
    sip
      registrar server expires max 3600 min 3600
      localhost dns:sip.skype.com
    voice class codec 1
    codec preference 1 g711ulaw
    voice class permanent 1
    signal timing oos restart 50000
    signal timing oos timeout disabled
    signal keepalive disabled
    signal sequence oos no-action
    voice class custom-cptone telstra
    dualtone disconnect
      frequency 425
      cadence 375 375
    voice class custom-cptone conference
    dualtone conference
      frequency 600 900
      cadence 300 150 300 100 300 50
    voice class custom-cptone jointone
    dualtone conference
      frequency 600 900
      cadence 300 150 300 100 300 50
    voice class custom-cptone leavetone
    dualtone conference
      frequency 400 800
      cadence 400 100 200 100 200 100
    voice register global
    mode cme
    source-address 10.0.0.1 port 5060
    max-dn 25
    max-pool 25
    authenticate register
    timezone 47
    hold-alert
    mwi stutter
    voicemail 999
    tftp-path flash:
    create profile sync 0007934814052285
    voice register dn  1
    number 201
    name B iPhone
    no-reg
    label 201
    voice register dn  2
    number 202
    name D iPhone
    no-reg
    label 202
    voice register dn  3
    number 203
    name C iPhone
    no-reg
    label 203
    voice register dn  4
    number 204
    name K iPad
    no-reg
    label 204
    voice register pool  1
    registration-timer max 720 min 660
    id mac 50EA.D669.27A3
    session-transport tcp
    type CiscoMobile-iOS
    number 1 dn 1
    dtmf-relay rtp-nte
    username user201 password 201
    no vad
    voice register pool  2
    registration-timer max 720 min 660
    id mac 148F.C646.6CFA
    session-transport tcp
    type CiscoMobile-iOS
    number 1 dn 2
    dtmf-relay rtp-nte
    username user202 password 202
    no vad
    voice register pool  3
    registration-timer max 720 min 660
    id mac DC2B.6198.4F3D
    session-transport tcp
    type CiscoMobile-iOS
    number 1 dn 3
    dtmf-relay rtp-nte
    username user203 password 203
    no vad
    voice register pool  4
    registration-timer max 720 min 660
    id mac 70DE.E239.73B8
    session-transport tcp
    type CiscoMobile-iOS
    number 1 dn 4
    dtmf-relay rtp-nte
    username user204 password 204
    no vad
    voice translation-rule 1
    rule 1 /\(.*\)/ /100/
    voice translation-rule 2
    rule 1 /^.*/ /xxxxxxxxxxxxxx/
    voice translation-rule 3
    rule 1 /617xxxxxxxx/ /130/
    voice translation-rule 4
    rule 1 /^004\(........\)/ /614\1/
    rule 2 /^099\(.*\)/ /\1/
    rule 3 /^0\(.*\)/ /\1/
    voice translation-rule 5
    rule 1 /617xxxxxxxx/ /130/
    rule 2 /\(.*\)/ /100/
    voice translation-profile INBOUND
    translate called 5
    voice translation-profile PSTN_Outbound
    translate calling 2
    translate called 4
    voice translation-profile SKYPE_IN
    translate called 3
    voice-card 0
    dspfarm
    dsp services dspfarm
    interface Loopback0
    ip address 11.1.1.1 255.255.255.255
    h323-gateway voip interface
    h323-gateway voip bind srcaddr 11.1.1.1
    interface Loopback2
    ip address 10.10.10.10 255.255.255.0
    interface Tunnel1
    no ip address
    interface GigabitEthernet0/0
    description ETH-LAN
    ip address 10.0.0.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly in
    duplex auto
    speed auto
    no cdp enable
    no mop enabled
    interface GigabitEthernet0/1
    description $ETH-LAN$
    ip address 192.168.0.1 255.255.255.0
    ip access-group 2 in
    duplex auto
    speed auto
    no cdp enable
    interface Service-Engine1/0
    ip unnumbered GigabitEthernet0/0
    service-module ip address 10.0.0.20 255.255.255.0
    service-module ip default-gateway 10.0.0.1
    no cdp enable
    interface Virtual-Template1 type tunnel
    ip unnumbered GigabitEthernet0/0
    tunnel mode ipsec ipv4
    tunnel protection ipsec profile CiscoCP_Profile1
    interface Virtual-Template2
    ip unnumbered Loopback2
    interface Vif1
    ip address 192.168.11.1 255.255.255.252
    ip pim dense-mode
    ip local pool SDM_POOL_1 10.0.0.75 10.0.0.95
    ip local pool SDM_POOL_2 10.1.0.2 10.1.0.50
    ip local pool SDM_POOL_3 192.168.1.50 192.168.1.60
    no ip forward-protocol nd
    ip http server
    ip http authentication local
    no ip http secure-server
    ip http path flash:gui
    ip flow-export destination 10.0.0.239 2055
    ip nat inside source list VPNAccess interface GigabitEthernet0/0 overload
    ip route 0.0.0.0 0.0.0.0 10.0.0.138
    ip access-list standard public
    ip access-list extended VPNAccess
    remark Allow VPN clients to access LAN
    remark CCP_ACL Category=2
    remark Allow CPN local LAN
    permit ip 192.168.1.0 0.0.0.255 any
    access-list 100 remark CCP_ACL Category=4
    access-list 100 permit ip 10.0.0.0 0.0.0.255 any
    no cdp run
    tftp-server flash:term70.default.loads
    tftp-server flash:term71.default.loads
    tftp-server flash:apps70.8-3-0-50.sbn
    tftp-server flash:cnu70.8-3-0-50.sbn
    tftp-server flash:cvm70sccp.8-3-0-50.sbn
    tftp-server flash:dsp70.8-3-0-50.sbn
    tftp-server flash:jar70sccp.8-3-0-50.sbn
    tftp-server flash:S00105000300.sbn
    tftp-server flash:SCCP70.8-3-1S.loads
    tftp-server flash:XMLDefault.cnf.xml
    tftp-server flash:United_States/g3-tones.xml
    tftp-server flash:English_United_States/td-sccp.jar
    tftp-server flash:English_United_States/ipc-sccp.jar
    tftp-server flash:P00308000600.bin
    tftp-server flash:P00308000600.sb2
    tftp-server flash:P00308000600.loads
    tftp-server flash:P00308000600.sbn
    tftp-server flash:apps70.8-4-1-23.sbn
    tftp-server flash:cnu70.8-4-1-23.sbn
    tftp-server flash:cvm70sccp.8-4-1-23.sbn
    tftp-server flash:dsp70.8-4-1-23.sbn
    tftp-server flash:jar70sccp.8-4-1-23.sbn
    tftp-server flash:SCCP70.8-4-2S.loads
    tftp-server flash:S00105000400.sbn
    tftp-server flash:RingList.xml
    tftp-server flash:DistinctiveRingList.xml
    tftp-server flash:Ring1.raw
    tftp-server flash:Ring2.raw
    tftp-server flash:Ring3.raw
    tftp-server flash:apps70.9-0-3TH1-22.sbn
    tftp-server flash:cnu70.9-0-3TH1-22.sbn
    tftp-server flash:cvm70sccp.9-0-3TH1-22.sbn
    tftp-server flash:dsp70.9-0-3TH1-22.sbn
    tftp-server flash:jar70sccp.9-0-3TH1-22.sbn
    tftp-server flash:SCCP70.9-0-3S.loads
    tftp-server flash:apps45.9-0-3TH1-22.sbn
    tftp-server flash:cnu45.9-0-3TH1-22.sbn
    tftp-server flash:cvm45sccp.9-0-3TH1-22.sbn
    tftp-server flash:dsp45.9-0-3TH1-22.sbn
    tftp-server flash:jar45sccp.9-0-3TH1-22.sbn
    tftp-server flash:SCCP45.9-0-3S.loads
    tftp-server flash:term65.default.loads
    tftp-server flash:term45.default.loads
    tftp-server flash:cmterm_7936.3-3-21-0.bin
    control-plane
    voice-port 0/2/0
    supervisory disconnect dualtone mid-call
    supervisory custom-cptone telstra
    no battery-reversal
    cptone AU
    timeouts interdigit 5
    timeouts call-disconnect 2
    timeouts wait-release 2
    timing hookflash-out 250
    impedance complex1
    caller-id enable
    voice-port 0/2/1
    supervisory disconnect dualtone mid-call
    supervisory custom-cptone telstra
    no battery-reversal
    cptone AU
    timeouts interdigit 5
    timeouts call-disconnect 2
    timeouts wait-release 2
    timing hookflash-out 250
    impedance complex1
    caller-id enable
    voice-port 0/2/2
    supervisory disconnect dualtone mid-call
    supervisory custom-cptone telstra
    no battery-reversal
    cptone AU
    timeouts interdigit 5
    timeouts call-disconnect 2
    timeouts wait-release 2
    timing hookflash-out 250
    impedance complex1
    caller-id enable
    voice-port 0/2/3
    supervisory disconnect dualtone mid-call
    supervisory custom-cptone telstra
    no battery-reversal
    cptone AU
    timeouts interdigit 5
    timeouts call-disconnect 2
    timeouts wait-release 2
    timing hookflash-out 250
    impedance complex1
    caller-id enable
    voice-port 0/3/0
    auto-cut-through
    voice-port 0/3/1
    mgcp profile default
    sccp local GigabitEthernet0/0
    sccp ccm 10.0.0.1 identifier 1 version 7.0
    sccp
    sccp ccm group 1
    bind interface GigabitEthernet0/0
    associate ccm 1 priority 1
    associate profile 1 register confdsp1
    keepalive retries 5
    dspfarm profile 1 conference 
    codec g711ulaw
    codec g729br8
    codec g729r8
    codec g711alaw
    codec g729ar8
    codec g729abr8
    maximum conference-participants 16
    maximum sessions 3
    conference-join custom-cptone jointone
    conference-leave custom-cptone leavetone
    associate application SCCP
    dial-peer voice 1 pots
    translation-profile incoming INBOUND
    preference 3
    destination-pattern 0T
    direct-inward-dial
    port 0/2/0
    dial-peer voice 2 pots
    translation-profile incoming INBOUND
    preference 2
    destination-pattern 0T
    direct-inward-dial
    port 0/2/1
    dial-peer voice 3 pots
    translation-profile incoming INBOUND
    preference 1
    destination-pattern 0T
    direct-inward-dial
    port 0/2/2
    dial-peer voice 4 pots
    shutdown
    port 0/2/3
    dial-peer voice 10 voip
    destination-pattern 99.
    session protocol sipv2
    session target ipv4:10.0.0.20
    incoming called-number .
    dtmf-relay cisco-rtp
    codec g711ulaw
    no vad
    dial-peer voice 100 voip
    description **Incoming Call from Skype SIP Trunk**
    translation-profile incoming SKYPE_IN
    session protocol sipv2
    session target sip-server
    incoming called-number .%
    voice-class codec 1 
    voice-class sip dtmf-relay force rtp-nte
    dtmf-relay rtp-nte
    no vad
    dial-peer voice 101 voip
    description **Outgoing Call from Skype SIP Trunk**
    translation-profile outgoing PSTN_Outbound
    destination-pattern 004........
    session protocol sipv2
    session target sip-server
    voice-class codec 1 
    voice-class sip dtmf-relay force rtp-nte
    dtmf-relay rtp-nte
    no vad
    dial-peer voice 5 pots
    description **Outgoing Mobile Failover**
    preference 4
    destination-pattern *04........
    direct-inward-dial
    port 0/2/2
    dial-peer voice 102 voip
    description **Outgoing Call to Skype - THAILAND**
    translation-profile outgoing PSTN_Outbound
    destination-pattern 066.........
    session protocol sipv2
    session target sip-server
    voice-class codec 1 
    voice-class sip dtmf-relay force rtp-nte
    dtmf-relay rtp-nte
    no vad
    dial-peer voice 103 voip
    description **Outgoing Call to Skype - UK**
    translation-profile outgoing PSTN_Outbound
    destination-pattern 044..........
    session protocol sipv2
    session target sip-server
    voice-class codec 1 
    voice-class sip dtmf-relay force rtp-nte
    dtmf-relay rtp-nte
    no vad
    dial-peer voice 104 voip
    description **Outgoing Call to Skype - Internat-ALL**
    translation-profile outgoing PSTN_Outbound
    destination-pattern 099T
    session protocol sipv2
    session target sip-server
    voice-class codec 1 
    voice-class sip dtmf-relay force rtp-nte
    dtmf-relay rtp-nte
    no vad
    dial-peer voice 700 voip
    destination-pattern 70.
    session protocol sipv2
    session target ipv4:10.0.0.20
    dtmf-relay sip-notify
    codec g711ulaw
    no vad
    dial-peer voice 712 voip
    destination-pattern A712
    session protocol multicast
    session target ipv4:237.111.0.0:22222
    voice-class permanent 1
    dtmf-relay cisco-rtp
    codec g711ulaw
    vad aggressive
    dial-peer voice 713 voip
    destination-pattern A713
    session protocol multicast
    session target ipv4:237.111.0.1:22222
    voice-class permanent 1
    dtmf-relay cisco-rtp
    codec g711ulaw
    vad aggressive
    dial-peer voice 70 pots
    preference 1
    destination-pattern 712
    dial-peer voice 71 pots
    preference 2
    destination-pattern 712
    dial-peer voice 72 pots
    preference 3
    destination-pattern 712
    sip-ua
    credentials username xxxxxxxxxxxxxx password 7 realm sip.skype.com
    authentication username xxxxxxxxxxxxxx password 7
    no remote-party-id
    retry invite 2
    retry register 10
    registrar dns:sip.skype.com expires 3600
    sip-server dns:sip.skype.com
    host-registrar
    telephony-service
    sdspfarm conference mute-on 111 mute-off 222
    sdspfarm units 3
    sdspfarm tag 1 confdsp1
    conference hardware
    video
    authentication credential xxxxx xxxxx
    xml user xxxxx password xxxxx 15
    max-ephones 96
    max-dn 110 no-reg
    ip source-address 10.0.0.1 port 2000
    auto assign 1 to 24
    service phone videoCapability 1
    timeouts interdigit 5
    system message xxxxx Pty Ltd
    url directories http://10.0.0.1:80/localdirectory
    url services http://10.0.0.20/voiceview/common/login.do
    url authentication http://10.0.0.1/CCMCIP/authenticate.asp 
    cnf-file perphone
    load 7914 S00105000400
    load 7936 cmterm_7936.3-3-21-0
    load 7960-7940 P00308000600
    load 7965 term65.default
    load 7970 term70.default
    time-zone 47
    time-format 24
    date-format dd-mm-yy
    live-record 998
    voicemail 999
    max-conferences 3 gain -6
    call-park system application
    moh music-on-hold.au
    web admin system name xxxxx secret 5 xxxxxxxxxxxxxxxx
    dn-webedit
    time-webedit
    transfer-system full-consult
    transfer-pattern 0
    transfer-pattern 2..
    transfer-pattern 7..
    secondary-dialtone 0
    directory entry 1 100 name Reception
    fac standard
    create cnf-files version-stamp 7960 Jun 04 2012 17:24:26
    ephone-template  1
    url services 2 http://xxxxxxlawyers.com/phone/xmldir/PhoneUI/ xxxxxxLawyers_DIRECTORY
    url services 3 http://jivait.com/phone/rss2cisco.pl NEWS@
    park reservation-group 1
    softkeys idle  Dnd Newcall Gpickup Pickup Cfwdall Redial ConfList Join RmLstC Login
    softkeys seized  Callback Cfwdall Endcall Gpickup HLog Meetme Pickup Redial
    softkeys connected  Hold Endcall Trnsfer Park TrnsfVM Confrn ConfList Select Join Acct LiveRcd Flash
    ephone-template  2
    url services 2 http://phone-xml.berbee.com/menu.xml TEST
    ephone-template  3
    park reservation-group 1
    softkeys idle  Dnd Newcall Gpickup Pickup Cfwdall Redial Login
    softkeys seized  Callback Cfwdall Endcall Gpickup HLog Meetme Pickup Redial
    softkeys connected  Hold Endcall Trnsfer Park TrnsfVM Confrn ConfList Join
    ephone-template  4
    park reservation-group 1
    softkeys seized  Meetme Gpickup Pickup Redial
    softkeys connected  Hold Trnsfer Park LiveRcd Endcall Confrn ConfList Select Join Acct
    ephone-dn  1  dual-line
    number 100 no-reg primary
    pickup-group 1
    label xxxxx xxxxx
    name Reception
    call-forward noan 999 timeout 40
    huntstop channel
    no huntstop
    ephone-dn  2  dual-line
    number 100 no-reg primary
    pickup-group 1
    label xxxxx xxxxx
    name Reception2
    preference 1
    call-forward noan 999 timeout 40
    huntstop channel
    no huntstop
    ephone-dn  3  dual-line
    number 100 no-reg primary
    pickup-group 1
    label xxxxx xxxxx
    name Reception3
    preference 2
    call-forward noan 999 timeout 40
    huntstop channel
    no huntstop
    ephone-dn  4  dual-line
    number 100 no-reg primary
    pickup-group 1
    label xxxxx xxxxx
    name Reception4
    preference 3
    call-forward busy 999
    call-forward noan 999 timeout 40
    huntstop channel
    ephone-dn  9  dual-line
    number 130 secondary 617xxxxxxxx no-reg both
    pickup-group 1
    label Private Line (07 xxxx xxxx)
    description 07 xxxx xxxx
    name Skype1
    ephone-dn  10  dual-line
    number 101 no-reg primary
    pickup-group 1
    label Ben xxxxxx (101)
    description Extension 101
    name Ben xxxxxx
    call-forward busy 999
    call-forward noan 999 timeout 25
    ephone-dn  11  dual-line
    number 102 no-reg primary
    pickup-group 1
    label Drew xxxxx (102)
    description Extension 102
    name Drew xxxxx
    call-forward busy 999
    call-forward noan 999 timeout 25
    ephone-dn  12  dual-line
    number 103 no-reg primary
    pickup-group 1
    label xxxxx xxxxxx (103)
    description Extension 103
    name xxxxx xxxxxx
    call-forward busy 999
    call-forward noan 999 timeout 25
    ephone-dn  13  dual-line
    number 104 no-reg primary
    pickup-group 1
    label Dennis xxxxx (104)
    description Extension 104
    name Dennis xxxxx
    call-forward busy 999
    call-forward noan 999 timeout 25
    ephone-dn  14  dual-line
    number 105 no-reg primary
    pickup-group 1
    label Meeting Room (105)
    description Extension 105
    name Meeting Room
    call-forward busy 999
    call-forward noan 999 timeout 25
    ephone-dn  15  dual-line
    number 106 no-reg primary
    pickup-group 1
    label Front Desk
    description Extension 106
    name Front Desk
    call-forward busy 100
    call-forward noan 100 timeout 45
    ephone-dn  16  dual-line
    number 107 no-reg primary
    pickup-group 1
    label Server
    description Extension 107
    name Server
    call-forward busy 100
    call-forward noan 100 timeout 45
    ephone-dn  19  dual-line
    number 119 no-reg primary
    pickup-group 1
    label Cordless
    description Extension 119
    name Cordless
    call-forward busy 100
    call-forward noan 100 timeout 30
    ephone-dn  20  dual-line
    number 121 no-reg primary
    pickup-group 1
    label Front Reception
    description Extension 121
    name Front Reception
    call-forward busy 999
    call-forward noan 999 timeout 25
    ephone-dn  21  dual-line
    number 120 no-reg primary
    pickup-group 1
    label Conference Phone
    description Extension 120
    name Conference Phone
    call-forward busy 999
    call-forward noan 999 timeout 25
    ephone-dn  22  dual-line
    number 122 no-reg primary
    pickup-group 1
    label Reception
    description Extension 122
    name Reception
    call-forward busy 999
    call-forward noan 999 timeout 25
    ephone-dn  25  dual-line
    number 126 no-reg primary
    pickup-group 1
    label xxxxxx SoftPhone
    description Extension 126
    name SoftPhone1
    ephone-dn  51
    number 151 no-reg primary
    label Line-1(5288)-Monitor ONLY
    trunk 1 monitor-port 0/2/0
    ephone-dn  52
    number 152 no-reg primary
    label Line-2(5232)-Monitor ONLY
    trunk 1 monitor-port 0/2/1
    ephone-dn  53
    number 153 no-reg primary
    label Line-3(5404)-Monitor ONLY
    trunk 1 monitor-port 0/2/2
    ephone-dn  98
    number 998 no-reg primary
    call-forward all 999
    ephone  1
    device-security-mode none
    video
    mac-address 0018.73E2.34D9
    ephone-template 1
    username "user1" password xxxxxx
    paging-dn 32
    type 7970 addon 1 7914
    button  1o1,2,3,4 2:51 3:52 4:53
    button  5:54 6m90 7m91 8m92
    button  9w10 10w11 11w12 12w13
    button  13w14 16:41 17:43 18:45
    ephone  2
    device-security-mode none
    video
    mac-address 000A.B84C.483F
    ephone-template 1
    username "user2" password xxxxxx
    paging-dn 32
    type 7970
    button  1:10 2:9 3:42 4m90
    button  5m91
    ephone  3
    device-security-mode none
    video
    mac-address 0019.2FE3.95A1
    ephone-template 1
    username "user3" password xxxxxx
    fastdial 1 00413093639 name Catherine
    fastdial 2 00432030586 name Ben
    paging-dn 32
    type 7970
    button  1:11 3w10 4w13 5m90
    button  6m91 7:46
    ephone  4
    device-security-mode none
    video
    mac-address 0019.2FE3.94F6
    ephone-template 1
    username "user4" password xxxxxx
    speed-dial 1 00408760740 label "IT Support"
    paging-dn 32
    type 7970 addon 1 7914 2 7914
    button  1:12 2:9 3o1,2,3,4 9:51
    button  10:52 11:53 12:54 15m90
    button  16m91 17m92 23:41 24:43
    button  25:45 29w10 30w11 31w13
    button  32w14 33w22 34w19 35:21
    ephone  5
    device-security-mode none
    mac-address 0019.2FB9.CA32
    ephone-template 1
    username "user5"
    paging-dn 32
    type 7970
    button  1:13 2:44 3m90 4m91
    ephone  6
    device-security-mode none
    mac-address 000A.B84C.4598
    ephone-template 1
    username "user6"
    paging-dn 32
    type 7970
    button  1:14 2m90
    ephone  7
    device-security-mode none
    mac-address 0018.73E2.369B
    ephone-template 1
    username "user7"
    paging-dn 32
    type 7970
    button  1o1,2,3,4 2:22
    ephone  8
    device-security-mode none
    mac-address 0015.5832.54A3
    ephone-template 2
    type CIPC
    button  1:25 2m1
    line con 0
    exec-timeout 0 0
    line aux 0
    line 66
    no activation-character
    no exec
    transport preferred none
    transport input all
    transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    line vty 0 4
    exec-timeout 0 0
    password
    transport input all
    scheduler allocate 20000 1000
    ntp master
    ntp update-calendar
    ntp server 150.101.221.106
    webvpn gateway gateway_1
    ip address 10.0.0.15 port 443 
    http-redirect port 80
    ssl trustpoint TP-self-signed-1560239260
    inservice
    webvpn install svc flash:/webvpn/anyconnect-win-3.0.3054-k9.pkg sequence 1
    end
    ============================================================================
    Jun  5 00:28:44.922: TFTP: Looking for term70.default.loads
    Jun  5 00:28:44.922: TFTP: Opened flash:term70.default.loads, fd 2, size 660 for process 314
    Jun  5 00:28:44.930: TFTP: Finished flash:term70.default.loads, time 00:00:00 for process 314
    Jun  5 00:28:46.054: TFTP: Looking for jar70sccp.9-0-3TH1-22.sbn
    Jun  5 00:28:46.058: TFTP: Opened flash:jar70sccp.9-0-3TH1-22.sbn, fd 2, size 1828680 for process 314
    Jun  5 00:28:52.018: TFTP: Finished flash:jar70sccp.9-0-3TH1-22.sbn, time 00:00:05 for process 314
    Jun  5 00:28:57.490: TFTP: Looking for cnu70.9-0-3TH1-22.sbn
    Jun  5 00:28:57.490: TFTP: Opened flash:cnu70.9-0-3TH1-22.sbn, fd 2, size 506761 for process 314
    Jun  5 00:28:59.134: TFTP: Finished flash:cnu70.9-0-3TH1-22.sbn, time 00:00:01 for process 314
    Jun  5 00:29:01.242: TFTP: Looking for apps70.9-0-3TH1-22.sbn
    Jun  5 00:29:01.246: TFTP: Opened flash:apps70.9-0-3TH1-22.sbn, fd 2, size 3084262 for process 314
    Jun  5 00:29:07.243: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:11 DeviceType:Phone has unregistered abnormally.
    Jun  5 00:29:11.219: TFTP: Finished flash:apps70.9-0-3TH1-22.sbn, time 00:00:09 for process 314
    Jun  5 00:29:19.791: TFTP: Looking for dsp70.9-0-3TH1-22.sbn
    Jun  5 00:29:19.791: TFTP: Opened flash:dsp70.9-0-3TH1-22.sbn, fd 2, size 540433 for process 314
    Jun  5 00:29:21.559: TFTP: Finished flash:dsp70.9-0-3TH1-22.sbn, time 00:00:01 for process 314
    Jun  5 00:29:23.619: TFTP: Looking for cvm70sccp.9-0-3TH1-22.sbn
    Jun  5 00:29:23.623: TFTP: Opened flash:cvm70sccp.9-0-3TH1-22.sbn, fd 2, size 2166976 for process 314
    Jun  5 00:29:30.807: TFTP: Finished flash:cvm70sccp.9-0-3TH1-22.sbn, time 00:00:07 for process 314
    Jun  5 00:31:07.536: TFTP: Looking for CTLSEP001873E2369B.tlv
    Jun  5 00:31:07.636: TFTP: Looking for ITLSEP001873E2369B.tlv
    Jun  5 00:31:07.748: TFTP: Looking for ITLFile.tlv
    Jun  5 00:31:08.004: TFTP: Looking for SEP001873E2369B.cnf.xml
    Jun  5 00:31:08.004: TFTP: Opened system:/its/vrf1/SEP001873E2369B.cnf.xml, fd 2, size 1543 for process 314
    Jun  5 00:31:08.012: TFTP: Finished system:/its/vrf1/SEP001873E2369B.cnf.xml, time 00:00:00 for process 314
    Jun  5 00:31:14.424: TFTP: Looking for English_United_States/td-sccp.jar
    Jun  5 00:31:14.428: TFTP: Opened flash:English_United_States/td-sccp.jar, fd 2, size 67385 for process 314
    Jun  5 00:31:14.756: TFTP: Finished flash:English_United_States/td-sccp.jar, time 00:00:00 for process 314
    Jun  5 00:31:15.480: TFTP: Looking for United_States/g3-tones.xml
    Jun  5 00:31:15.480: TFTP: Opened flash:United_States/g3-tones.xml, fd 2, size 1036 for process 314
    Jun  5 00:31:15.488: TFTP: Finished flash:United_States/g3-tones.xml, time 00:00:00 for process 314
    Jun  5 00:31:31.604: %IPPHONE-6-REG_ALARM: 25: Name=SEP001873E2369B Load= term70.default Last=Initialized
    Jun  5 00:31:31.652: %IPPHONE-6-REGISTER: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:11 DeviceType:Phone has registered.
    Jun  5 00:31:33.228: %IPPHONE-6-UNREGISTER_NORMAL: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:11 DeviceType:Phone has unregistered normally.
    Jun  5 00:32:34.333: TFTP: Looking for CTLSEP001873E2369B.tlv
    Jun  5 00:32:34.413: TFTP: Looking for ITLSEP001873E2369B.tlv
    Jun  5 00:32:34.521: TFTP: Looking for ITLFile.tlv
    Jun  5 00:32:34.853: TFTP: Looking for SEP001873E2369B.cnf.xml
    Jun  5 00:32:34.853: TFTP: Opened system:/its/vrf1/SEP001873E2369B.cnf.xml, fd 2, size 1543 for process 314
    Jun  5 00:32:34.861: TFTP: Finished system:/its/vrf1/SEP001873E2369B.cnf.xml, time 00:00:00 for process 314
    Jun  5 00:32:39.861: %IPPHONE-6-REG_ALARM: 25: Name=SEP001873E2369B Load= term70.default Last=Initialized
    Jun  5 00:32:39.905: %IPPHONE-6-REGISTER: ephone-7:SEP001873E2369B IP:10.0.0.204 Socket:13 DeviceType:Phone has registered.
    OLSENCISCO#
    =====================================================
    ephone-1[0] Mac:0018.73E2.34D9 TCP socket:[17] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.221 * 52191 7970  sub=1 keepalive 2082 max_line 22 available_line 22
    Phone reports 22 Available Lines
    button 1: cw:1 ccw:(0 0)
      dn 1  number 100 CH1   IDLE         CH2   IDLE         overlay shared
    button 2: cw:1 ccw:(0)
      dn 51 number 151 CH1   IDLE         shared
    button 3: cw:1 ccw:(0)
      dn 52 number 152 CH1   IDLE         shared
    button 4: cw:1 ccw:(0)
      dn 53 number 153 CH1   IDLE         shared
    button 5: cw:1 ccw:(0)
      dn 54 number 154 CH1   IDLE         shared with monitor-ring
    button 6: cw:1 ccw:(0)
      dn 90 number 300 CH1   IDLE         monitor-ring shared
    button 7: cw:1 ccw:(0)
      dn 91 number 301 CH1   IDLE         monitor-ring shared
    button 8: cw:1 ccw:(0)
      dn 92 number 302 CH1   IDLE         monitor-ring shared
    button 9: cw:1 ccw:(0 0)
      dn 10 number 101 CH1   IDLE         CH2   IDLE         watch(BLF on phone 2) shared with monitor-ring
    button 10: cw:1 ccw:(0 0)
      dn 11 number 102 CH1   IDLE         CH2   IDLE         watch(BLF on phone 3) shared with monitor-ring
    button 11: cw:1 ccw:(0 0)
      dn 12 number 103 CH1   IDLE         CH2   IDLE         watch(BLF on phone 4) shared
    button 12: cw:1 ccw:(0 0)
      dn 13 number 104 CH1   IDLE         CH2   IDLE         watch(BLF on phone 5) shared with monitor-ring
    button 13: cw:1 ccw:(0 0)
      dn 14 number 105 CH1   IDLE         CH2   IDLE         watch(BLF on phone 6) shared with monitor-ring
    button 16: cw:1 ccw:(0)
      dn 41 number A501  auto dial A502 CH1   IDLE         shared with monitor-ring
    button 17: cw:1 ccw:(0)
      dn 43 number A503  auto dial A504 CH1   IDLE         shared with monitor-ring
    button 18: cw:1 ccw:(0)
      dn 45 number A505  auto dial A506 CH1   IDLE         shared with monitor-ring
    FXO Port Monitoring Status
    button: 2 dn: 51 FXO Port: 0/2/0 Status: Idle
    button: 3 dn: 52 FXO Port: 0/2/1 Status: Idle
    button: 4 dn: 53 FXO Port: 0/2/2 Status: Idle
    button: 5 dn: 54 FXO Port: 0/2/3 Status: Idle
    overlay 1: 1(100) 2(100) 3(100) 4(100)
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user1 Password:xxxxxxxx
    ephone-2[1] Mac:000A.B84C.483F TCP socket:[15] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.216 * 52908 7970  keepalive 2081 max_line 8 available_line 8
    button 1: cw:1 ccw:(0 0)
      dn 10 number 101 CH1   IDLE         CH2   IDLE         shared with monitor-ring
    button 2: cw:1 ccw:(0 0)
      dn 9  number 130 CH1   IDLE         CH2   IDLE         shared
    button 3: cw:1 ccw:(0)
      dn 42 number A502  auto dial A501 CH1   IDLE
    button 4: cw:1 ccw:(0)
      dn 90 number 300 CH1   IDLE         monitor-ring shared
    button 5: cw:1 ccw:(0)
      dn 91 number 301 CH1   IDLE         monitor-ring shared
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user2 Password: xxxxxxxx
    ephone-3[2] Mac:0019.2FE3.95A1 TCP socket:[16] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.223 * 49428 7970  keepalive 2069 max_line 8 available_line 8
    button 1: cw:1 ccw:(0 0)
      dn 11 number 102 CH1   IDLE         CH2   IDLE         shared with monitor-ring
    button 3: cw:1 ccw:(0 0)
      dn 10 number 101 CH1   IDLE         CH2   IDLE         watch(BLF on phone 2) shared with monitor-ring
    button 4: cw:1 ccw:(0 0)
      dn 13 number 104 CH1   IDLE         CH2   IDLE         watch(BLF on phone 5) shared with monitor-ring
    button 5: cw:1 ccw:(0)
      dn 90 number 300 CH1   IDLE         monitor-ring shared
    button 6: cw:1 ccw:(0)
      dn 91 number 301 CH1   IDLE         monitor-ring shared
    button 7: cw:1 ccw:(0)
      dn 46 number A506  auto dial A505 CH1   IDLE
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user3 Password: xxxxxxxx
    ephone-4[3] Mac:0019.2FE3.94F6 TCP socket:[19] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.201 * 52711 7970  sub=2 keepalive 2050 max_line 36 available_line 35
    Phone reports 35 Available Lines
    button 1: cw:1 ccw:(0 0)
      dn 12 number 103 CH1   IDLE         CH2   IDLE         shared
    button 2: cw:1 ccw:(0 0)
      dn 9  number 130 CH1   IDLE         CH2   IDLE         shared
    button 3: cw:1 ccw:(0 0)
      dn 1  number 100 CH1   IDLE         CH2   IDLE         overlay shared
    button 9: cw:1 ccw:(0)
      dn 51 number 151 CH1   IDLE         shared
    button 10: cw:1 ccw:(0)
      dn 52 number 152 CH1   IDLE         shared
    button 11: cw:1 ccw:(0)
      dn 53 number 153 CH1   IDLE         shared
    button 12: cw:1 ccw:(0)
      dn 54 number 154 CH1   IDLE         shared with monitor-ring
    button 15: cw:1 ccw:(0)
      dn 90 number 300 CH1   IDLE         monitor-ring shared
    button 16: cw:1 ccw:(0)
      dn 91 number 301 CH1   IDLE         monitor-ring shared
    button 17: cw:1 ccw:(0)
      dn 92 number 302 CH1   IDLE         monitor-ring shared
    button 23: cw:1 ccw:(0)
      dn 41 number A501  auto dial A502 CH1   IDLE         shared with monitor-ring
    button 24: cw:1 ccw:(0)
      dn 43 number A503  auto dial A504 CH1   IDLE         shared with monitor-ring
    button 25: cw:1 ccw:(0)
      dn 45 number A505  auto dial A506 CH1   IDLE         shared with monitor-ring
    button 29: cw:1 ccw:(0 0)
      dn 10 number 101 CH1   IDLE         CH2   IDLE         watch(BLF on phone 2) shared with monitor-ring
    button 30: cw:1 ccw:(0 0)
      dn 11 number 102 CH1   IDLE         CH2   IDLE         watch(BLF on phone 3) shared with monitor-ring
    button 31: cw:1 ccw:(0 0)
      dn 13 number 104 CH1   IDLE         CH2   IDLE         watch(BLF on phone 5) shared with monitor-ring
    button 32: cw:1 ccw:(0 0)
      dn 14 number 105 CH1   IDLE         CH2   IDLE         watch(BLF on phone 6) shared with monitor-ring
    button 33: cw:1 ccw:(0 0)
      dn 22 number 122 CH1   IDLE         CH2   IDLE         watch(BLF on phone -1) shared with monitor-ring
    button 34: cw:1 ccw:(0 0)
      dn 19 number 119 CH1   IDLE         CH2   IDLE         watch(BLF on phone 16) shared with monitor-ring
    button 35: cw:1 ccw:(0 0)
      dn 21 number 120 CH1   IDLE         CH2   IDLE         shared with monitor-ring
    FXO Port Monitoring Status
    button: 9 dn: 51 FXO Port: 0/2/0 Status: Idle
    button: 10 dn: 52 FXO Port: 0/2/1 Status: Idle
    button: 11 dn: 53 FXO Port: 0/2/2 Status: Idle
    button: 12 dn: 54 FXO Port: 0/2/3 Status: Idle
    overlay 3: 1(100) 2(100) 3(100) 4(100)
    speed dial 1:00408760740 IT Support
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user4 Password: xxxxxxxx
    ephone-5[4] Mac:0019.2FB9.CA32 TCP socket:[14] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.222 * 51034 7970  keepalive 2129 max_line 8 available_line 8
    button 1: cw:1 ccw:(0 0)
      dn 13 number 104 CH1   IDLE         CH2   IDLE         shared with monitor-ring
    button 2: cw:1 ccw:(0)
      dn 44 number A504  auto dial A503 CH1   IDLE
    button 3: cw:1 ccw:(0)
      dn 90 number 300 CH1   IDLE         monitor-ring shared
    button 4: cw:1 ccw:(0)
      dn 91 number 301 CH1   IDLE         monitor-ring shared
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user5
    ephone-6[5] Mac:000A.B84C.4598 TCP socket:[5] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.219 * 49291 7970  keepalive 2135 max_line 8 available_line 8
    button 1: cw:1 ccw:(0 0)
      dn 14 number 105 CH1   IDLE         CH2   IDLE         shared with monitor-ring
    button 2: cw:1 ccw:(0)
      dn 90 number 300 CH1   IDLE         monitor-ring shared
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user6
    ephone-7[6] Mac:0018.73E2.369B TCP socket:[13] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.204 * 50084 7970  keepalive 100 max_line 8 available_line 8
    button 1: cw:1 ccw:(0 0)
      dn 1  number 100 CH1   IDLE         CH2   IDLE         overlay shared
    button 2: cw:1 ccw:(0 0)
      dn 22 number 122 CH1   IDLE         CH2   IDLE         shared with monitor-ring
    overlay 1: 1(100) 2(100) 3(100) 4(100)
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user7
    ephone-11[10] Mac:001F.CA35.5721 TCP socket:[9] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 19/17 max_streams=5
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:9
    IP:10.0.0.77 * 53104 7965  keepalive 1214 max_line 6 available_line 6
    button 1: cw:1 ccw:(0 0)
      dn 27 number 128 CH1   IDLE         CH2   IDLE
    button 2: cw:1 ccw:(0 0)
      dn 1  number 100 CH1   IDLE         CH2   IDLE         overlay shared
    button 3: cw:1 ccw:(0)
      dn 51 number 151 CH1   IDLE         shared
    button 4: cw:1 ccw:(0)
      dn 52 number 152 CH1   IDLE         shared
    button 5: cw:1 ccw:(0)
      dn 53 number 153 CH1   IDLE         shared
    FXO Port Monitoring Status
    button: 3 dn: 51 FXO Port: 0/2/0 Status: Idle
    button: 4 dn: 52 FXO Port: 0/2/1 Status: Idle
    button: 5 dn: 53 FXO Port: 0/2/2 Status: Idle
    overlay 2: 1(100) 2(100) 3(100)
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user11 Password: xxxxxxxx
    ephone-13[12] Mac:000D.BCE9.7533 TCP socket:[1] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 11/9 max_streams=0
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.235 * 50792 Telecaster 7940  keepalive 2143 max_line 2 available_line 2
    button 1: cw:1 ccw:(0 0)
      dn 15 number 106 CH1   IDLE         CH2   IDLE
    button 2: cw:1 ccw:(0 0)
      dn 1  number 100 CH1   IDLE         CH2   IDLE         overlay shared
    overlay 2: 1(100) 2(100) 3(100) 4(100)
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user13 Password: xxxxxxxx
    ephone-15[14] Mac:0014.6A87.716A TCP socket:[2] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 11/9 max_streams=1
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.236 * 50649 Telecaster 7940  keepalive 2142 max_line 2 available_line 2
    button 1: cw:1 ccw:(0 0)
      dn 16 number 107 CH1   IDLE         CH2   IDLE
    button 2: cw:1 ccw:(0)
      dn 90 number 300 CH1   IDLE         monitor-ring shared
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none
    ephone-16[15] Mac:0019.55EC.B6FF TCP socket:[7] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 1/1 max_streams=0
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:7
    IP:10.0.0.185 * 10664 ATA Phone  keepalive 2139 max_line 1 available_line 0
    button 1: cw:1 ccw:(0 0)
      dn 19 number 119 CH1   IDLE         CH2   IDLE         shared with monitor-ring
    Preferred Codec: g711ulaw
    Lpcor Type: none Username: user16 Password: xxxxxxxx
    ephone-17[16] Mac:1955.ECB6.FF01 TCP socket:[6] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 1/1 max_streams=0
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:3
    IP:10.0.0.185 * 10663 ATA Phone  keepalive 2139 max_line 1 available_line 0
    button 1: cw:1 ccw:(0 0)
      dn 2  number 100 CH1   IDLE         CH2   IDLE         shared
    Preferred Codec: g711ulaw
    Lpcor Type: none
    ephone-18[17] Mac:001B.2AC6.BE43 TCP socket:[3] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 11/9 max_streams=0
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:8
    IP:10.0.0.77 * 51863 Telecaster 7940  keepalive 1232 max_line 2 available_line 2
    button 1: cw:1 ccw:(0 0)
      dn 28 number 129 CH1   IDLE         CH2   IDLE
    button 2: cw:1 ccw:(0 0)
      dn 12 number 103 CH1   IDLE         CH2   IDLE         silent-ring shared
    paging-dn 32
    Preferred Codec: g711ulaw
    Lpcor Type: none
    ephone-19[18] Mac:0004.F2E2.43E0 TCP socket:[8] activeLine:0 whisperLine:0 REGISTERED in SCCP ver 4/3 max_streams=0
    mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:4
    IP:10.0.0.215 * 1038 7936  keepalive 2567 max_line 1 available_line 0
    button 1: cw:1 ccw:(0 0)
      dn 21 number 120 CH1   IDLE         CH2   IDLE         shared with monitor-ring
    Preferred Codec: g711ulaw
    Lpcor Type: none

  • Menu not showing - Process external statement.

    Hi
    am using the superuser manager login, In banking modules, banks and external reconcilation, process external statement will come. its coming other professional user login, but its not showing in manager super user login.
    What will be the issue.
    Regards
    Sundaram

    Hi Sundaram,
    Go to Tools -> Click Form Setting AND
    Click Banking Module -> Bank Statements and Reconciliations ->(Select) Process External Bank Statement
    Thanks,
    Madhan.

Maybe you are looking for

  • How can I get me external HD to mount aigain?

    Here we go. First time in almost 20 years of mac-using that I end up here. But I am not at all the experienced user that goes sniffing around in the deep dark secrets of Mac-OS. But this time I need some help. By accident my external drive got unplug

  • Scroller with Paging function

    Hi, I'm looking for a component or a way to create a scrollview with paging mode enabled. Same component than the scroller on IOS photogalerie (swipe to go to the next image and move with finger position). I find a FLEX example here http://www.adobe.

  • Problem combining multiple mp4 files in quicktime

    I'm trying to combine three mp4 files (about 70 MB each) into one video file. I read that quicktime could do this rather easily. Sure enough, after opening one mp4 I can simply drag in the other two after it. Next I can either close the file, which w

  • Scheduling agreement(Urgent)

    Dear Experts, I have got a query liek this... User has created a SAgmt on 01/04/2007...in that it has got 3 items.. ex: 1.matl1     500qty      100rs    01/04/2007-31/03/2008 2.matl2     100            50       01/04/2007-31/03/2008 3.matl3     120  

  • Need Clarification About16 GB Recovery Partition

    Hi All, I would like to ask a question to anyone who is reading this tread. Is there any successful HP customer who created "HP Recovery USB" by the help of "HP Recovery Manager"? And used it on their notebook and notebook became as "Factory Defaults