Show Me Messages When I Launch Reader
I have created a package ArcoRead.msi with a MST.
I was wondering if I could automate the following settings:
- Show Me Messages When I Launch Reader
- Don’t Show Messages While Viewing A Document
I want the first one to be deselected and the second one to be selected.
How can I manage that ? By customize package or by registry key ?
Any help is welcome.
found it myself using procmon.exe
This two entrys to disable "Messages from Adobe" (See Preferences > General)
HKCU\Software\Adobe\Acrobat Reader\10.0\IPM\bDontShowMsgWhenViewingDoc: 0x00000001
HKCU\Software\Adobe\Acrobat Reader\10.0\IPM\bShowMsgAtLaunch: 0x00000000
Would there be a HKLM solution as well. Does anybody know ?
For now I added the keys with the Adobe Customization Wizard 10 in my MST. Works perfectly.
Next step will be creating the file HideItems.js to hide Adobe Online menu items.
Similar Messages
-
Is there a way to show Custom message in Outlook Mail read Inspector Window same as When a File is opened in Protected View.
If we open a Document from Untrusted location,the file is opened in Protected mode and a Red Message bar is shown below the ribbon for Excel,Word apps.
Can we show this type of similar message bar with custom Message in Outlook or any other Office App.Are you displaying an MSG file? Keep in mind that Outlook creates a temporary copy in one of Outlook folders, so strictly speaking your are not looking at a file.
Dmitry Streblechenko (MVP)
http://www.dimastr.com/redemption
Redemption - what the Outlook
Object Model should have been
Version 5.5 is now available! -
I just updated Firefox but can't get it to display the message when a pop-up is blocked. Most times I want them blocked but sometimes I need them enabled.
You can see a pop-up block icon in the right corner of the Status Bar if you have chosen to hide the information bar at the top.
You can left-click that pop-up block icon on the Status Bar and remove the check mark from "Don't show info message when pop-ups are blocked"
You can look at these prefs on the '''about:config''' page and reset them via the right-click context menu:
Status bar icon: browser.popups.showPopupBlocker
Info bar at the top: privacy.popups.showBrowserMessage
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page. -
Show error message when Install SM7 in step 4 execute Service
Hi All
Show error message when Install SM7 in step 4 execute Service.
Anyone can help me fix the problem pls!
Regards
Kevin
Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
Information for SAPInst:
sid=SMD
number=98
2009.06.08 11:16:59
Task completed with status 0
INFO 2009-06-08 11:17:00.0
Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.250
FSL-02077 File system export (share) saploc does not exist.
INFO 2009-06-08 11:17:00.484
Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.718
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:05.265
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO 2009-06-08 11:17:05.609
Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:05.875
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:08.187
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:10.531
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:12.859
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:15.156
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
WARNING[E] 2009-06-08 11:17:20.281
FSL-01002 Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
INFO 2009-06-08 11:17:20.562
Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:20.781
Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:22.312
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
INFO 2009-06-08 11:17:28.828
Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:29.093
Node C:\WINDOWS\system32 already exists.
INFO 2009-06-08 11:17:31.0
Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:32.390
Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
INFO 2009-06-08 11:17:33.171
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.203
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.250
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.281
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.328
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.375
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.421
Nothing to do. User privileges are an empty string.
INFO[E] 2009-06-08 11:17:35.703
FSL-01027 Account user="hk-is-000818\SAPServicePAS" does not exist.
WARNING[E] 2009-06-08 11:17:40.796
FSL-01002 Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
WARNING[E] 2009-06-08 11:17:40.796
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-06-08 11:17:40.843
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .hi Subhash
tkx it work
but I got another error when install afterwards. do u know how can fix , many tkx
Kevin
WARNING 2009-06-09 20:39:02.421
Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-06-09 20:39:02.468
FCO-00011 The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR . -
Itunes store does not show on ipad when i launch app its pages are blank
itunes store does not show on ipad when i launch app its pages are blank
This indicates there might be an issue with the time configuration on the device.
Go to Settings > General > Date and time. See if Set automatically is switched to on. If so, switch to off and ensure you set date, time and time zone manually and correctly.
Power off the device (hold sleep button for four seconds, then slide to power off), then power back on.
If issue persists, switch Set automatically back to on, and if not resolved then restore the device. -
I keep getting this message when I launch PP "Premiere Pro cannot find any capable video play modules". I've read through a few threads and made the recommended changes but still no luck, it crashes everytime. I have a Mac Pro 2010 with a Nivdia Quadro FX 4800.
Hello and thanks for the response. Yes, I've read that post and many others, I still get the same message when trying to open. I've realized there's no way to get tech support for any of the products I'm using. Is there another place hat can help me with this problem? I really wanted to try PP but looks like I won't be able to.
Thanks -
I am on a mac system 10.6.8. I get an "unknown error" message when I launch Illustrator 5.5
Yes, it worked recently!
But I have just solved the problem... I threw out the preferences & restarted. Thanks! -
im using windows 8 64bit version and Lenovo QuickLaunch constantly give me a stopped working message when i launch it. Any solutions? its really frustrating. Also if anyone has any suggestions to why my laptop takes around 3 minutes to connect to any wifi signal can you advise me on what I should do.
thanks
yp
Solved!
Go to Solution.QuickLaunch was recently withdrawn, which is why it's not longer available on the Lenovo download website or System Update. I recommend uninstalling it, and using something else like http://www.pokki.com/windows-8-start-menu
As for 3 minutes to connect to Wifi, what system do you have? -
has anyone had this happen, error message when trying to read ebook E_AUTH_BAD_DEVICE_KEY_OR_PKCS12
deauthorize (shift-ctrl-d) and then restart ade. you will be prompted to re-authorize.
-
Show scheduling message when direct edits to Start date
Is therre a way to show scheduling message when someone is editing the Start date directly for a task, I understand that a constrain get set by doing so, yet I also want to display some kind of scheduling message to the PMs, is it possible.
Yes, Julie you are right. If "Advice from Planning Wizard" option is cleared in Options, Project updates a key to value 0
Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\Display PlanningWizard
But if "Do not tell me about this again" is selected in Planning Wizard dialog the below key is updated and there is no way to turn this on through Options:
Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\PlanningWizardCases
By default, the Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\PlanningWizardCases has the value 11111111111111111111111111111111111111111111111111111
Also, there are several combinations too. If "Do not tell me about this again" is selected when a successor task is moved from the predecessor, the Key: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\MS Project\Options\PlanningWizard\PlanningWizardCases
is updated with 11111111111011111111111111111111111111111111111111111
Sai PMP, PMI-SP, MCTS Project, MVP Project -
How can I set the view to only show unread messages persistently for a mailbox (e.g. junk)?
I used to be able to set it by folder. Removing the feature does not make the product better. I have no desire, for example, to see all the old spam, but I do want to see my old mail. I don't understand what the developers were thinking when they removed this capability.
-
When I choose my "Mail" app it only shows 2 messages in my inbox when I know there are more. How do I resolve this? Thanks.
You need to create HTML signatures for use with the Apple Mail apps. You can't just throw in a logo, it has to be stored on the internet and it's location coded into your signature. You may find a service and an app that helps you do that in the iTunes App Store.
-
OS X 10.5 Mail shows unread messages when there are none and get ghost messages
I have been searching for an ansswer to this delimma, but have found similar issues but none exactly the same. I run 10.6 server and have mixed network users of 10.6 and 10.5 clients. One of the users on 10.5 's mail app keeps showing unread messages, but there are no unread messages. When they click on another mail box in the mail client or another folder the number changes, but ther always seems to be one or two. The user also gets at least 2 blank e-mails in the mail app. I have check the users web mail account and there are no blank e-mail messages or spam. I tried to rebuild the mail box, and have also tried trashing the indexs, and they still get the same message. Short of creating a new user does anyone have any suggestions? None of my other users seem to have the same problem, although they do not use mail as much as this one user does.....
I get this issue every single day, and it is specifically reproducible. Here is the scenario:
1) I have two mail accounts configured on my iPhone, one is my work account and is disabled on the phone, the other is my gmail account which is always enabled on my phone
2) Each morning, when I head into work I enabled my work email account so I can start reading my work emails for the day. This downloads all the new messages from the server and displays them as unread.
3) I read some of them, but not all of them.
4) Once I get to my office, I read all of the rest of my new work emails from the Mail app on my MacBook Pro.
EXPECTED: The messages that are read on the mail app are updated as read messages
OBSERVED: On my iphone, not all of the messages have their statuses changed to read. Some of them always remain as unread messages
5) Next, I delete some of the messages read from my computer from the email server altogether.
EXPECTED: These messages would also appear deleted when using the mail app on my iPhone
OBSERVED: Not only are the messages not deleted, but they are still listed as unread
The only way to resolve this each day is for me to select each message and view it for a second to have the unread message indicator removed. I have to turn off the mail account and turn it back on for it to correctly sync with the mail server and correct the mistakes.
There is clearly a problem within the iPhone mail app with retrieving updates from the mail servers.
I have an iPhone 4 running iOS 4.2.1 that I purchased in November. Before that, I had an iPhone 3G S and never experienced the issue on my 3G S. My MacBook Pro was used with both devices. -
Get an error message when trying to "read more" in my iWeb posting
I just installed the latest software updates and now I get this message when I click on "Read More" in my iWeb page
but we can't find the iWeb page you've requested. It's possible that:
· The address was entered incorrectly. Check your spelling and try again.
· The .Mac member of this name has either created a page and removed it or has never published an iWeb site.
· There is no .Mac member of this name. If you'd like this member name for yourself, sign up for a .Mac account right now and have your own iWeb site in minutes.
This seems to only happen when I use Safari and not when I use Firefox. It was working fine in both until I installed the software updates.
Anyone know why or what I should do?In the course of your troubleshooting to date, have you worked through the following document?
iTunes Store: "An unknown error occured (-9808)" -
Show status message when we press "to order" button in Tcode MB1A
Hi Friends,
I want to show a status message when the button "to order" is triggered in the Tcode MB1A. The status message can be shown either in the 1st screen or 2nd screen.
Thanks,
AnuHi Anuradha,
Check this BADI: MB_CHECK_LINE_BADI
Reddy
Maybe you are looking for
-
I have Photoshop Elements 11 installed but Premiere Elements will not install due to the problem installing shared technologies. I would appreciate any suggestions as to how to fix the issue. I tried the installation several times.
-
Exchange Rate difference in MIGO
Hello members, During MIGO, a material document is created and subsequently an accounting document is created. BADI has been developed as per the business requirement to post the accounting document by taking the exchange rate as on the Document Date
-
Truncating Data Output in SMARTFORM main window
Hi, I have a requirement that i will only show 5 lines from a certain table in my smartforms, currently its required to be in the main table because of spacing issue and the possibility that there will be no data from the table. My problem is that ev
-
Placing a series of photos on the same background in Photoshop CS2
I am trying to create a series of photos that all have the same background. I have the background file (it is a .tif file) and then a folder with all the photos in it. I have saved each photo as a .tif as well. I want each photo to be place on the ba
-
Using code, I'd like to animate a movieclip so that it sways back and forth
I'd like a piece of text to basically move around slightly....like it's floating. Just a slight back and forth, maybe a little up and down. Real subtle though. how would i do this with code. Can you please help me. Thanks