Show Model, OS and Other Details Info in Reply window for Originator

When posting a reply in a thread it would be helpful if the Model, OS and Other Details information for the person we are replying to be shown in that window. Right now we have to toggle back to the thread window to check on their information.
Thanks,

Kady,
Thanks for going around and noting people's suggestions. It helps a lot and I personally and most likely everyone else here appreciate all you do for the discussions, along with the other hosts and sysops
Thank you!
btabz

Similar Messages

My MacBook is plugged in with a green light and shows it's plugged in, but is not charging. When it's unplugged, it dies. It was charging last time I used it but not any more. I am no computer whiz and need detailed info on what to do Thanks.

My MacBook is plugged in with a green light and shows it's plugged in, but is not charging. When it's unplugged, it dies. It was charging last time I used it but not any more. I am no computer whiz and need detailed info on what to do Thanks.

The model 2,1 MacBook has an easily removable battery. You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
Removing the battery:
Shut down the computer. Disconnect any cords connected to the computer.
Turn the computer over.
Locate the battery latch on one side of the battery.
Use a coin to turn the latch a quarter-turn clockwise. The battery should pop up slightly.
Lift the battery out.
Installing the battery:
Place the right side of the battery into the battery compartment at an angle, as shown below.
Gently press the left side of the battery down until it sits flat.
While holding the battery down, use a coin to turn the latch a quarter-turn counter-clockwise. The battery should lock into place.
Note: Keep in mind that once the new battery is inserted, you will need to press the power button to start up the computer.

Recently PopClip stopped showing "Cut," "Paste," and other similar options

Hello,
Recently, PopClip stopped showing "Cut," "Paste," and other similar options. I haven't changed anything in the settings. Maybe this will help:
2013-06-04 18:55:22.886 PopClip[1167:707] [INFO] PopAppDelegate: PopClip Initializing.
2013-06-04 18:55:23.089 PopClip[1167:707] Could not find image named 'BuyLabel'.
2013-06-04 18:55:23.093 PopClip[1167:707] Could not find image named 'BlueTick'.
2013-06-04 18:55:23.162 PopClip[1167:707] NSWindow does not support nonactivating panel styleMask 0x80
2013-06-04 18:55:23.164 PopClip[1167:707] [INFO] PopAppDelegate: PopClip will wait 0.500000 seconds to start.
2013-06-04 18:55:26.591 PopClip[1167:707] .sdef warning for argument 'FileType' of command 'save' in suite 'Standard Suite': 'saveable file format' is not a valid type name.
2013-06-04 18:55:26.623 PopClip[1167:707] Bartender Loaded
logout
Thank you in advance for the help!

This is something you'll want to address with the developer of PopClip.

Adobe Captivate full price and other details

Adobe Captivate full price and other details like inclusive for how many years and is it for multiple users?

Hello
Adobe Captivate 8 can be bought on a variety of licensing models such as perpetual or subscription and the pricing will depend on the volume you buy.
For a single retail license - the perpetual software (you own it for perpetuity) is prices at $999 in North America and the single subscription license is available for $19.99/month for an annual plan in North America. If you have more extensive licensing requirements - please send us an email on [email protected] and we will have someone assist you.
Regards
Adobe Captivate Team

Import ECC No and other details (Excise Information)

Hi All,
Which is the template to import ECC no. and other details for BP?
These fields are not present in BP fiscal id template?
Thanks,
Joseph

Hi Joseph,
Try This .....
Link: [url] Import - ECC No. & other tax details for BP
Thanks
Shafi

Whenever i open internet it shows untrusted connection....and in google images it shows few images and other quite white.....what to do?

whenever i open internet it shows untrusted connection....and in google images it shows few images and other quite white.....what to do?

Hello,
please check you system Date and time and make sure they are correct .
Moreover
A common problem recently is Firefox not being set up to work with your security software. Some security suites include a filtering feature. In order to filter secure connections (HTTPS URLs), the security software presents a fake certificate to Firefox so it can intercept and stand in the middle of the secure connection. To have Firefox trust these certificates, you may need to do something such as import a root certificate, or click something in your security software's settings.

Can you enter text into "info" pop-up window for TV Shows?

It's not a big deal, but I was just wondering if there is a way (a script perhaps) of entering text into the little "info" pop-up window for TV Shows in iTunes? (You know the one...it pops-up when you click on the little "i" in the description box on the TV Shows main playlist)
The show files I made myself have blank info windows of course and it would be nice to be able to enter a decent length description of the episode (the character limit in the "Description" box is so short).
Like I said, it's not a big deal, but it would be nice to be able to enter info in there...so if anybody knows how...please let me know.
Yhanx a lot!

Thank you very much for your reply! I will definitely pass this along to the IT department! Smiling now!

My suddenly no longer works and dosn't show any sign and when i try to make restore for it iTunes shows me error 4005 and my iPhone does not respond to iTunes

my suddenly no longer works and dosn't show any sign and when i try to make restore for it, iTunes shows me error 4005 and my iPhone does not respond to iTunes

OK, and when you searched for information on iPhone error 4005 what did you find?

8.0.2 - problem 1 - unable to scroll screen when the keyboard is present. Huge problem for emails and other cloud based providers that allow for data entry. We need a fix ASAP!

8.0.2 - problem 1 - unable to scroll screen down or up when the keyboard is present. When typing text, I am unable to see the text I am writing due to this problem. Huge problem for emails and other cloud based providers that allow for data text entry. While the keyboard is present, I am unable to scroll down to see the text, the screen automatically scrolls back up to the top of the screen. We need a fix ASAP!

Have you tried resetting your iPad? You will not lose any data. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I dropped my iPad 4 and all it showed was red and other fizzy colors, so I tapped the back but that only made it worse....

I dropped my iPad 3 and it caused the screen to go red and fizzy with like static, so I went online to find a soultion. The most common one and the one that worked the best for everyone else, tapping the back/front. I did this but this only caused it to become more broken, now all it shows is a black or gray box thing moving across the screen only half-way and then teleporting back to the left side of the screen. What can I do?

Sounds like a hardware problem. You need to contact Apple.
Here are some things that you can try but I don't want to give you any confidence.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

FIOS On Demand - Why so long to post newly aired shows on HBO and other channels?

I am a new FIOS TV customer having just switched my service from Comcast.
I have noticed that it seems to take FIOS a long time to post new shows to various On Demand TV channels.
For Example, I am a big fan of HBO programming including Entourage, True Blood, and Hung.   With Comcast, if a new episode aired on Sunday night, it was available on Comcast On Demand the following morning (early Monday AM.)    This was great as it meant I never had to waste DVR space recording the show if I couldn't watch it.
With FIOS, I am noticing it takes DAYS and DAYS for these new episodes to post. Why is that?   HBO says on their channel that "The program you are watching will be available on demand starting TOMORROW."     So why does it take Fios so long to post newly aired shows?
The same goes for Bravo, TLC, and other networks. But HBO is the big one for me.
Thanks.

I agree and am having the same issue. When I go to the HBO on demand folder many shows are not showing. I did however notice if I do a search I can find things that do not show up under the HBO folder.
For instance, Entourage S8 Episode 1 which just aired on Sunday July 24th, 2011 does not show in the HBO folder in the vOD section, but if I search Entourage it come up.
Please fix it!

Elements 10 trial doesn't show guided edit and other menus

I've just downloaded and installed the Photoshop Elements 10 trial for the second time.
I shut down my firewall and internet security while installing.
The program loads fine but when I click on Guided edit, the panel on the right is blank.
This is the same for Quick edit.
The help files also won't load.
I'm running a Windows 7 on a 64 bit machine.
Please help!

Try clicking the re-set panels button on the top menu bar and see if that makes any difference. Have you tried with an image open. Certainly the Quick edit module remains grayed out usually until you have a photo in the main window.
If that does not fix it you may need to rebuild the editor preferences to resolve any conflicts.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. Release the three keys and look behind the welcome screen by closing it.
You should see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Close down Elements and re-open it in the normal way - then wait whilst it rebuilds the preferences.

Timezone abbreviation meanings and other timezone info

Hi All,
I'm working as an Enterprise Architect for a multinational with multiple breeds of database all over the place.
I'm trying to ensure that the entire organisation is using the same (correct) timezone definitions and I need some confirmation and have some questions around oracles implmentation. Apologies if I'm missing the blindingly obvious....
As I understand it, Oracle lists the timezones either in file timezonelrg.dat or timezone.dat these are machine-readable contains information on timezone and abbreviation that users can see via V$TIMEZONE_NAMES. The information is based on Olson's zoneinfo.
There are often multiple abbreviations for a timezone, these refer to daylight saving and other adjustments that can be applied to that timezone area.
Timezone.dat also has offset information connected with the timezones and abbreviations. This is used for automatic daylight saving. It can only be accessed using a function.
Is this correct?
If so....Where do I find a list of the abbreviations, their meanings and the offsets (the Oracle Database Globalisation Support guide only lists 6 meanings, there are lots more)?
Is there a place that I can find a complete human-readable version of the zoneinfo database?
Thanks for your help in advance.
Cheers
Paul

You can obtain a list of time zone names and time zone abbreviations from the time zone file that is installed with your database by entering the following statement:
SELECT tzname, tzabbrev FROM v$timezone_names;
(Ref: http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10749/ch4datetime.htm)
However, a slightly bigger list can also be found at
http://www.timeanddate.com/library/abbreviations/timezones/

If I use my iPhone 5 to take a crime photo and email it out annomonusly, can my phone number and location details be traced? Thanks for your advice

If I use my iphone 5 to take a crime photo and I would like to report it annomously, can my phone number and location details be traced?
I email the photo to my gmail account and then I download it to my computer and then resend it using another email account.
Unfortunately, I did not disable my location details before I took the phone. My mistakes.
Appreciate your advice

When you take a phote these days, there is a lot of information imbedded in the photo file.
There are apps around for view & scrubbing photo files.
http://lifehacker.com/5756373/how-can-i-remove-personal-info-like-locaion-from-p hotographs
Robert

How to Block Themes, Wallpapers and other Display Customizations (DPI, Scaling, Window Color and Appearance) with USMT 5.0?

I'm doing something wrong, but I can't figure out what.
I've read some great write ups on the subject:
USMT Custom XML the Free and Easy Way
USMT
4.0 Custom Sample - Blocking Wallpaper and Theme Migration from Windows Vista and Windows 7
Blocking
Wallpaper Migration with USMT (or: you are a jerk)
and used part of the XML in their example, but the wallpaper, themes and other display customizations are still coming over. Now I'm trying to use MigXmlHelper.DestinationPriority() but really its just my last ditch effort.
From an elevated command prompt in C:\USMT\amd64\, I'm executing:
scanstate.exe E:\USMTBackup /config:nothemeuiconfig.xml /i:MigApp.xml /i:MigDocs.xml /i:MigUser.xml /i:unconditionalexclusions.xml /i:blockwallpaperandthemev3.xml /i:getlocalpsts.xml /i:inclusions.xml /ui:domain1\user1 /ue:*\* /vsc /c /o /nocompress /localonly /v:13 /l:\\path\to\scanstate.log /progress:\\path\to\scanstate_progress.log /listfiles:\\path\to\scanstate_listfiles.log
The blockwallpaperandthemev3.xml contains:
<?xml version="1.0" encoding="UTF-8"?>
<migration urlid="http://www.microsoft.com/migration/1.0/migxmlext/blockwallpaperandthemev3">
<component type="Documents" context="User">
<displayName>Block Wallpaper, Theme and Display Registry Settings</displayName>
<role role="Data">
<rules>
<unconditionalExclude>
<objectSet>

<pattern type="Registry">HKCU\Control Panel\Appearance\* [*]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [Pattern]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [SCRNSAVE.EXE]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [TileWallpaper]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaper]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaperStyle]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop\Colors [*]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop\WindowMetrics [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Internet Explorer\Desktop\General [WallpaperSource]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Wallpapers\* [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\ThemeManager\* [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Themes\* [*]</pattern>
</objectSet>
</unconditionalExclude>
<merge script="MigXmlHelper.DestinationPriority()">
<objectSet>
<pattern type="Registry">HKCU\Control Panel\Appearance\* [*]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [Pattern]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [SCRNSAVE.EXE]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [TileWallpaper]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaper]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaperStyle]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop\Colors [*]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop\WindowMetrics [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Internet Explorer\Desktop\General [WallpaperSource]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Wallpapers\* [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\ThemeManager\* [*]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Themes\* [*]</pattern>
</objectSet>
</merge>
</rules>
</role>
</component>

<component type="Documents" context="User">
<displayName>Block Wallpapers and Theme Files</displayName>
<role role="Data">
<rules>
<unconditionalExclude>
<objectSet>
<content filter="MigXmlHelper.ExtractSingleFile(NULL, NULL)">
<objectSet>
<pattern type="Registry">HKCU\Control Panel\Desktop [SCRNSAVE.EXE]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaper]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Internet Explorer\Desktop\General [WallpaperSource]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Themes\* [*]</pattern>
</objectSet>
</content>
</objectSet>
</unconditionalExclude>
<merge script="MigXmlHelper.DestinationPriority()">
<objectSet>
<content filter="MigXmlHelper.ExtractSingleFile(NULL, NULL)">
<objectSet>
<pattern type="Registry">HKCU\Control Panel\Desktop [SCRNSAVE.EXE]</pattern>
<pattern type="Registry">HKCU\Control Panel\Desktop [WallPaper]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Internet Explorer\Desktop\General [WallpaperSource]</pattern>
<pattern type="Registry">HKCU\Software\Microsoft\Windows\CurrentVersion\Themes\* [*]</pattern>
</objectSet>
</content>
</objectSet>
</merge>
<unconditionalExclude>
<objectSet>
<pattern type="File">%CSIDL_LOCAL_APPDATA%\Microsoft\Windows\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_APPDATA%\Microsoft\Windows\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Resources\Ease of Access Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Resources\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Web\Wallpaper\* [*]</pattern>
</objectSet>
</unconditionalExclude>
<merge script="MigXmlHelper.DestinationPriority()">
<objectSet>
<pattern type="File">%CSIDL_LOCAL_APPDATA%\Microsoft\Windows\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_APPDATA%\Microsoft\Windows\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Resources\Ease of Access Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Resources\Themes\* [*]</pattern>
<pattern type="File">%CSIDL_WINDOWS%\Web\Wallpaper\* [*]</pattern>
</objectSet>
</merge>
<unconditionalExclude>
<objectSet>
<script>MigXmlHelper.GenerateDrivePatterns ("\Users\*\AppData\Local\Microsoft\Windows\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Users\*\AppData\Roaming\Microsoft\Windows\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Resources\Ease of Access Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Resources\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Web\Wallpaper\* [*]","Fixed")</script>
</objectSet>
</unconditionalExclude>
<merge script="MigXmlHelper.DestinationPriority()">
<objectSet>
<script>MigXmlHelper.GenerateDrivePatterns ("\Users\*\AppData\Local\Microsoft\Windows\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Users\*\AppData\Roaming\Microsoft\Windows\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Resources\Ease of Access Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Resources\Themes\* [*]","Fixed")</script>
<script>MigXmlHelper.GenerateDrivePatterns ("\Windows\Web\Wallpaper\* [*]","Fixed")</script>
</objectSet>
</merge>
</rules>
</role>
</component>
</migration>
I generated a config.xml called nothemeuiconfig.xml and changed this:
<component displayname="Microsoft-Windows-themeui" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-themeui/microsoft-windows-themeui/settings"/>
To this:
<component displayname="Microsoft-Windows-themeui" migrate="no" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-themeui/microsoft-windows-themeui/settings"/>
But themes, wallpapers - everything - still come over.
Opened a case with Microsoft, sent them:
the XML's I'm using
the command I used to generate the config.xml
the command I used for scanstate
the log files generated by scanstate
the command I used for loadstate
the log files generated by loadstate
Summary result of the MS case:
After much review & scrutiny, the command line and XML files are syntactically correct and rules are sound.
The articles I referenced in the ticket are indeed old and speak of an older version of USMT, so I can accept the possibility that something may have changed between USMT versions that render those suggested rules & instructions invalid.
Despite using
unconditionalExclude to unconditionally globally exclude objects, something else is trumping that rule, and there’s no way around that.
Even using
MigXmlHelper.DestinationPrioity() won’t help us here because, like above, something else trumps that rule, and there’s no way around that.
The last proposed suggestion is to disable the shmig component, which may or may not break or otherwise adversely affect the backup/restore of other things. (This may be too difficult to detect easily or in initial testing and the uncertainty doesn’t
give us confidence problems won’t arise as a result of this change. Also,
Ned Pyle's post post says NOT to, but then again that's an old post.)
Is this no longer possible or am I'm just doing it wrong?

Thanks for the reply
TimAmico!
I saw your responses on Friday & Saturday, but didn't reply because I wanted to think this over a bit and try to get a second opinion.
The 'Appearance and Display' component looks to have a has a number of sub-components.
<component displayname="Appearance and Display" migrate="yes" ID="appearance_and_display">
<component displayname="Windows Games Settings" migrate="yes" ID="appearance_and_display\windows_games_settings">
<component displayname="Microsoft-Windows-GameExplorer" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-gameexplorer/microsoft-windows-gameexplorer/settings"/>
</component>
<component displayname="Taskbar and Start Menu" migrate="yes" ID="appearance_and_display\taskbar_and_start_menu">
<component displayname="Microsoft-Windows-stobject" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-stobject/microsoft-windows-stobject/settings"/>
<component displayname="Microsoft-Windows-explorer" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-explorer/microsoft-windows-explorer/settings"/>
</component>
<component displayname="Personalized Settings" migrate="yes" ID="appearance_and_display\personalized_settings">
<component displayname="Microsoft-Windows-uxtheme" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-uxtheme/microsoft-windows-uxtheme/settings"/>
<component displayname="Microsoft-Windows-themeui" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-themeui/microsoft-windows-themeui/settings"/>
<component displayname="Microsoft-Windows-shmig" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-shmig/microsoft-windows-shmig/settings"/>
<component displayname="Microsoft-Windows-shell32" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-shell32/microsoft-windows-shell32/settings"/>
<component displayname="Microsoft-Windows-CommandPrompt" migrate="yes" ID="http://www.microsoft.com/migration/1.0/migxmlext/cmi/microsoft-windows-commandprompt/microsoft-windows-commandprompt/settings"/>
</component>
</component>
If I'm understanding the XML correctly, setting 'Appearance and Display' to 'no' will not bring over any of the sub components:
Windows Games Settings: Microsoft-Windows-GameExplorer
Tarkbar & Start Menu: Microsoft-Windows-stobject
Tarkbar & Start Menu: Microsoft-Windows-explorer
Personalized Settings: Microsoft-Windows-uxtheme
Personalized Settings: Microsoft-Windows-themeui
Personalized Settings: Microsoft-Windows-shmig
Personalized Settings: Microsoft-Windows-shell32
Personalized Settings: Microsoft-Windows-CommandPrompt
If so, that, to me at least, represents a pretty significant change! We want the pinned items but not the backgrounds and themes so that specific change won't work for us, but glad to hear it meets your needs. (Also greatly appreciate your sharing
your results with us.)
I'll admit, even before reaching out to MS, the logs clearly show that the themes/backgrounds are all part of the 'Microsoft-Windows-shmig' component but dang it if I want something of substance (read: official documentation) that covers what exactly that
component handles. (I like to know what I'm potentially getting myself into.)

Show Model, OS and Other Details Info in Reply window for Originator

Similar Messages

Maybe you are looking for