Show multiple thumbnails / documents
Hi,
got a problem with Acrobat 8.12 / WinXP. When I open two (or more) PDFs in order to drag and drop pages from one doc to another, I can't get the program to show two thumbnails pages the same way as it worked previously.
Now there is only one thumbnail window that changes between the documents and I really can't figure out any way to drag the pages as thumbnails from one document to another.
It does not seem to matter whether I use the option of opening all the documents in a single window or separate windows, either. I can, however drag an entire PDF to the thumbnails panel and it drops in just fine.
I'm using a dual monitor setup with a Nvidia graphics card if that matters.
TIA, Pisto
Don't undock the thumbnail window. Execute the menu entry View > Navigation Panels > Dock All Panels.
Similar Messages
-
How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database table) using Dreamweaver’s Repeat Region. Example: I have different products each one associated (through their productID) with two images (one that’s showing in the page and one for the rollover effect) that are pulled from a database using Dreamweaver’s Recordset. So I want to end up with a page containing row after row of images(one for every product).When moused over each image will reveal the second (rollover) image for the same product which in turn can be a link(the image itself ) that when clicked leads to a detailed page with more information about the product the image is associated with. To show row after row with images for the different products in the database table I am using Dreamweaver’s Insert Rollover Image command and then the Repeat Region – I have no problem to complete the steps, to insert the image and the rollover one at once and set the paths so they are pulled dynamically depending on the productID they are associated with .I have also no problem to apply the Repeat Region so not only the first image associated with the first product in the table is shown but all of them-a routine and standard procedure when using the Repeat Region to dynamically generate and display multiple rows of data. However, when I preview the page the rollover effect is lost –the images are shown but when moused over the second image does not show. The problem is caused when the Repeat Region is applied-once again I am allowed to apply it but the rollover stops working, a kind of interference. ANY SOLLUTION PLEASE, ANY WORK AROUND.
I gotta tell you, using multiple images for rollover effects is going to be a big challenge in your dynamic scenario.
If this were my product page, I would use thumbnails with a bit of CSS opacity or filters to desaturate and make them full opacity/color on mouse over. Nice effect with much less bandwidth. Easily done globally with CSS code.
Two examples:
http://alt-web.com/GALLERY/GalleryTest.php
http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
Nancy O. -
Selecting multiple thumbnails weirdness
Windows 7 64
Bridge 5.02.4 x64
Cache is not exported to folders
When I want to select multiple thumbnails, I hold down the Ctrl key and click the desired thumbnails. Only the first 2 or 3 thumbnails change state, yet they all show in the preview window on the right. When I release the Ctrl key they all change state to show that they are selected. So if selecting many, I don't know which I have selected until I release the Ctrl key.
Selecting with the shift key works as expected.
I have reset preferences and it seems to work normally only once or twice. Same with purging cache. I have uninstalled and reinstalled Bridge but the problem keeps coming back. It is somewhat intermittent as once in a while I can select 5 or 6 and they will all highlight, but 95+% of the time it works as described above.
Keyboard, graphics, etc., drivers are at latest level.
Any ideas? Thanks for any ideas.
AlThanks for the ideas, Yammer.
Graphics: AMD Radeon HD 6570
Memory 1024 MB
Memory type 2
Driver version 13.152.1.8000
Haven’t changed anything other than turn on GPU in Photoshop.
Thumbnail size: Acts the same way no matter the thumbnail size. Selected the same files in Windows Explorer and it worked as it should.
Scroll: Tried all the options, no difference.
Fancy Keyboard/rodent: No. Logitech USB wireless KB and Mouse, Wacom tablet, all with latest drivers.
Accessibility: Nothing turned on there.
These were great suggestions! Keep thinking J
Al -
Show multiple frames in a single SWFLoader
Hello,
I am loading a document contained in an .swf file, each page is in a single frame, to an SWFLoader. The SWFLoader shows a single frame at a time.
I would like to show multiple frames at once and be able to manipulate them together (scaling, positioning).
I know how to do it with a single frame easily, but is it possible with 2 or more frames?
Thank you in advance,
Mr Cartman.A SWF can only show one frame at a time.
-
Bridge sometimes won't show jpg thumbnails
Sometimes when saving a photo from ACR as a JPG, Bridge won't show the thumbnail. It seems a random thing for some show and others don't. If I click on the thumbnail it will open in PSCC. Then save as a TIFF and it shows. If I change it back to a JPG, then it shows up. Anyone have any idea why this is happening?
Thanks,
SueIt is a cache problem. If it happens again choose the thumb icon and with right mouse click menu choose 'purge cache for selection' then it will build a new thumb and it shows correctly.
If it happens in one folder choose the folder and in menu tool / cache choose 'purge cache for folder'.
If happening on multiple folders even a purge of central cache is needed either in preferences or on start up holding down option(Mac) or control (Win) key and choose this option from the menu that shows. -
I want Preview to always show the thumbnails view!!!!!
Latest build of preview, Mountain lion OS X
When I open a PDF in Preview, it shows the Table of Contents view. I want Preview to always show the thumbnails view! Is there a way to change this to the default setting? (And dont say goto view - thumbnails, that's not a default option)Every time I pick a photo or PDF it starts with the Table of Contents view every time!This works but only when opening the same document. Other documents just default to the plain view.
Big oversight - particularly when merging lots pdfs and each one has to be manually changed to thumbnail view. All becomes very cumbersome -
Required quantity and multiple drawing documents in the work centers
Hi Gurus
I have created BOM, which contain item - drawing document, quantity 1 pc.
Irrespective of the total quantity of finished product the drawing document should be only one pc, as we use one document per work center.
However, output of "Required Quantity" using CS03 shows as multiple drawing documents instead of just one drawing document.
Please throw some light on this.
Thanks in advance.
Akshay N.
SAP PP certi.Hi
In the item details update fixed quantity indicator for the drawing item
so it will be always fixed to 1.
Regards
Abhishek -
PO Values showing multiple time in Report
Hello Expert,
We had one report called PO Status report it is fetching data from ME23N from ECC,when i am checking the report in BW the report PO showing multiple values for different different invoices which should not be the case it should be same,please help me to fix the issue.can i change something in reporting level
Thanks and Regards,
JyotiHello All,
Thanks for the reply i had cheked by putting PO number and Invoice number next to next in the report but the total amount of the value is coming more than the line items in the Purchase order in ECC.I would like to give example of the issue like for X PO there are 3 line items and 5 invoices the total sum of the line items for the PO is for ex 3000 with 5 invoices.Expected results in BW is the sum of the line items=(PO Amount),but in report it is taking the invoices value and PO value for each invoices and adding all the invoices PO amount as in our case 15000 which is incorrect.Please help
Thanks and Regards,
Jyoti -
Data in the cube is showing multiple entries when compared with ODS
Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika -
LR 5.3 showing wrong thumbnails
I have been running LR 5.3 smoothly for a while but a couple of minutes ago LR started to show wrong thumbnails, it shows thumbnails from a delete Snapshot. I have tried purging my cache but nothing happens. I have upgraded from LR 3 to LR 3.5 Ideas ? This is my system:
Lightroom version: 5.3 [938183]
Operating system: Windows 7 Home Premium Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 2
Processor speed: 1.9 GHz
Built-in memory: 3003.1 MB
Real memory available to Lightroom: 3003.1 MB
Real memory used by Lightroom: 912.9 MB (30.4%)
Virtual memory used by Lightroom: 901.7 MB
Memory cache size: 364.0 MB
Maximum thread count used by Camera Raw: 2
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1366x768
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.3
Library Path: C:\Users\User\Pictures\Lightroom\Lightroom 5 Catalog.lrcat
Settings Folder: C:\Users\User\AppData\Roaming\Adobe\Lightroom
Installed Plugins:
1) 500px
2) Behance
3) Canon Tether Plugin
4) Facebook
5) Flickr
6) Leica Tether Plugin
7) Nikon Tether Plugin
8) SmugMug
Config.lua flags: None
Adapter #1: Vendor : 8086
Device : 2a42
Subsystem : 360b103c
Revision : 7
Video Memory : 64
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Conexant High Definition SmartAudio 221)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: LR5x89
CardID: 10818
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: Mobile Intel(R) 4 Series Express Chipset Family
ShaderModel: 10.0
Vendor: Intel
VendorID: 32902
Version: 8086:2a42:360b103c:0007I have had this problem also ever since I updated to 5.3, I think it is a major bug!
At random the preview window on the left doesnt show the preview of the presets anymore when I hover them, and when I click back and forth to other images it suddenly starts working again, its a very annoying problem and I cannot believe that Adobe isnt aware of it yet!
Marcel -
When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
I've tried rebuilding the thumbnail database, but that hasn't helped.What version of iPhoto and system are you running?
Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left. Does that let more than one photo display in the window?
OT -
Help. How do I change the page size of a pdf in MAC? I have multiple pdf documents in varying sizes I would like to combine and print.
There's no real need to do that. A PDF can have pages of different sizes.
On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]> -
AssignedTo showing multiple times on report
I was tasked with creating some reports from Service Manager using the cubes. My boss wanted a report that showed all active tickets, showing from high to low the analyst, then the category, then the user.
I used the following Fields:
IncidentStatusValue in the Column Label
IncidentDimCount in the Values
AssignedToUserDim.DisplayName, IncidentClassificationValue, and AffectedUserDim.DisplayName in the Row Labels.
The report looks exactly as I want it to.
The problem is that the data is wrong on several levels.
Issue 1: It shows multiple entries for the AssignedToUserDim.DisplayName
I changed the names, but if I click on the number 1 next to Joe User(Affected User) for either Analyst1 or 2 a tab open with IR48005. Basically the two analyst both show an active ticket assigned to them, when only one of them should.
Issue 2: The Grand Total that is calculated by the PivotTable is incorrect. I copy and paste the same numbers into the cells next to the PivotTable and the total is something completely different.
The weird thing about this also is that when I did this 20 minutes ago before writing this post, the Autocalc showed 130.
The first issue is more important than the second issue. It is not just this report and I have tried using many different values only to get the same duplication. Its almost like the DataWarehouse is not actually deleting the previous AssignedTo
user. The history in the actual ticket shows that it should be, but the reports show something different.
This then throws off every report I try to make. I made one for totals tickets per analyst and I noticed that I got credit for closed tickets that I had previously reassigned, as did the person who the ticket was reassigned to.
Can anyone offer any suggestions?
Thanks.
MattUnfortunately no. But I think I found a pattern in regards to this: it seems the current assigned to user is always the one listed the last.
I guess this is because the stored procedure behind the AssignedToUserDim doesn't filter if the relationship is still active. This is quite easy to "reproduce" via PowerShell.
Lets say you have an IR with ID IR1234 which has been re-assigned multiple times.
If you run this small query now in PowerShell you'll see that all the AssignedToUser relationships still exists, but only one of them has the property "IsDeleted" set to False.
Import-Module SMlets
$IRO = Get-SCSMObject -Class (Get-SCSMClass System.WorkItem.Incident$) -Filter "Id -eq IR1234"
Get-SCSMRelationshipObject -BySource $IRO | where {$_.RelationshipID -eq "15e577a3-6bf9-6713-4eac-ba5a5b7c4722"}
So, in the DB those AssignedToUser relationships (actually it applies to all relationships) won't be "overwritten" or the old one deleted as soon as you re-assign an incident for example. Instead, new relationshipobjects will be generated and the old ones
changes the "IsDeleted" attribute to True.
Perhaps it would be possible to create a new Dim for the Data Warehouse, re-use the stored procedure for the AssignedToUserDim and modify it slightly to filter only for the active AssignedToUser relationship. Then you could use your newly created dim to
display the current Assigned To User. I haven't tested this though, probably it's more complex than I assume :)
Cheers
Alex -
Single billing document for multiple delivery documents
Hi,
Can someone tell me how to configure or proceed to make single billing document for multiple delivery documents.
Document flow: Contract--> Order---> Delivery----> Billing
-ThanksBeing an old member of the forum, there is no need to stress the importance of adhering to forum rules where it has been clearly spelled out to avoid posting repeated queries.
If you search the forum or Google it, you will find lot of documentations available on the same topic. Take the inputs and try on your own. Still if you face any issue, update here.
G. Lakshmipathi -
How can I get iTunes to not show multiples of the same podcasts in my iPhone?
Not all, but some have the same episdoe multiple times. Every sync seems to add another one of them. This happens, through iTunes, in my iPhone 5. In iTunes, I show that I have 69 unplayed podcasts. When I sync, I can see it got to 68 for my phone (likely one is in the cloud), but then it flashes and now it shows 113. When I look at the unplayed podcasts, I show that some of them have as many as 17 of the same episode in my phone. When I go to my phone's podcast app, I see it once.
It doesn't happen to all episodes, and I can't find anything in common between those that it does happen to. The newest update to the podcast app and itunes brought back some features that have been missing for over a year, but this is getting weird.
iTunes 11.2.1 (1)
IOS 7.1.1After a couple of days, I'm noticing that the repeat(ing) offenders have more than 10 episodes, and seem to keep repeating them every time I sync.
They only show once in my phone and in the iTunes Podcasts, but through iTunes and looking at what's in my phone is when I see the repeats.
Even after I've marked a podcast as played, and deleted it from within my phone, as well as telling iTunes to delete the played episodes, it still shows multiples of the played episodes.
There doesn't seem to be any rhyme or reason to it either. They aren't the newest ones either.
Maybe you are looking for
-
How can I get iCal alarm to sync with my iPhone 4?
My iCal alarm won't sync with my iPhone 4 if I add the event using iCal on my Mac. I find that if I set an alarm on iCal, I only get an alert on my computer. If I add an event on my iPhone, I get a pop up alarm on both the phone and the computer. I w
-
Blank PDFs in Linux with [acroread] defunct Adobe Reader 9.4
I am having an issue on a SuSE 11 sp1 box where opening a pdf after closing one gives me a blank screen. a ps -ef | grep acro* shows [acroread]<defunct> for the acroread process that was running. I noticed that I can open & close as many as 20 pdfs f
-
Exporting to a word doc- what's the point? Why does it not work?
hello, whenever I export and PDF into a word document in order to highlight and make notes, the word document either says "unable to read document" or there are lines through the word document and it's not in a format in which I can highlight and mak
-
Lightroom Mobile sync and 2 computers
Hi All, I've looked but I can't see a specific answer to this question, so I thought I'd make it my first posting. I've just subscribed to Creative Cloud for Lightroom. I liked the idea of being able to sync different devices and continue work whilst
-
SELECT statement INTO TABLE - what determines order of entries in in.table?
Hello everyone. I habe a question: A select statement selects multiple entries from a data base table that are put into an internal table. The question : What determines the order of the entries in the internal table? And what might change the order