Show my caller id button turns off after setting att

show my caller id button turns off after setting at&t, any help

Hi, try this method, it works for me on an iphone4 & 4S (iOS7)
make sure you have all apps closed before next steps.
-Go to Settings, Phone, Show My Caller ID. (if button is Greyed Out)
-Pull down Control Centre & Turn On Airplane Mode & return to Show My Caller ID screen.
-Now slide your screen from right to left taking you to another screen, then slide back to your Show My Caller ID screen.
-Now You Can turn ON or OFF your Caller ID Button.
-Lastly slide down you Control Centre again and Turn OFF your Airplane Mode.
Thats it Job done.
Please note, it will now stay in the mode that you have chosen(ON or OFF) even if you respring or reboot your phone. But if you return back to
Show My Caller ID screen, then you SIM Provider will automatically Disable your Caller ID screen BUTTON once again. So just repeat the steps
above and your be fine.
Hope this helps.

Similar Messages

HT4061 my iphone4 has a broken lock screen button. im struggling to turn it on, when i plug it in it keeps restarting showing the apple sign then turning off again. any ideas how to fix this problem?

my iphone4 has a broken lock screen button. im struggling to turn it on, when i plug it in it keeps restarting showing the apple sign then turning off again. any ideas how to fix this problem?

That happened to my brother earlier. He went into Facebooand then into another app and the same thing happened. he ended up having to restore it. Mine stayed with the Apple logo for a bit but its back to normal after pressing the buttons a million times. I hope you get your problem sorted. Goodluck!

IPhone turns off after calls

Why does the iPhone turn off after phone calls. I've had two phones now, both have had this problem. It doesn't happen on all calls. On one phone it happened more than the other. But the Iphone turns off after some phone calls and it takes anywhere from about 15-40 seconds before the turn on button will actually turn on the phone. Is this a hardware problem, or a software problem?

It's neither, it's normal. If the phone was asleep when the call came in, it will go back to sleep when the call ends since this was the last thing it was doing when you accepted the call.

My iphone turned off after I got off the phone. It was fully charged and it went black. I plugged it into my wall charger and my computer, but nothing has showed up, its still dead. It was totally fine before. What happened?

My iphone turned off after I got off the phone today. It was more than half way charged and it went totally black. I plugged it into my wall charger and my computer, but nothing has showed up. It doesn't register on the computer either, the charge symbol doesn't appear, and there is no apple logo to be found. I have no idea what happened! It was totally fine before. I tried charging another ipod with my usb and wall charger to make sure that they were still working, and they weren't the problem. What happened? Is the phone dead for good? I have a 3G if that changes anything. THANKS!

Press and hold both the on/off button and the home button and release them both when the apple logo appears. That will reboot the phone. try that.

TS1363 apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

And when you held them neither the red Off slider nor the Apple logo appeared?
If not then your sleep button is broken, you will need to get it serviced.

Phone turns off after caller hangs up

I have the new G3 and when I am finished with a call the phone turns off and will not turn back on for a minute or 2

I'm having this same problem. The phone display goes black after a phone call ends. I am not able to get any image or reponse at all either by pressing sleep or home or anything. A few minutes later the display will suddenly appear on its own.
Even worse, the same time this started (about 10 days ago) no one can hear me on a phone call. I can hear the other person with no problem. My i PHONE is useless until I get this resolved.

Sound for messages and e-Mail get turned off after using handsfree in car

Does anyone have a solution when sounds alerting messages and e-mails are turned off after using the phone in var with handsfree (using Bluetooth)? The sounds are turned back on when restarting the phone but reoccurs after driving in car with handsfree again. This is very annoying when takling several trips with car during a day. The phone still rings when receiving a call.

I did find a solution to my iPhone-iPod-music-overriding-streaming-streaming-services-while-connected-to-USB problem Although, this solution is likely only applicable to BMW owners with the BMW Apps feature aka 6NR.
There may be other/simpler ways, but this seems to work:
1) Launch Pandora (or could be Mog, or other BMW Apps app) BEFORE you start iPhone/iPod playback
2) Start playback of Pandora via ConnectedDrive/BMW Apps.
3) Press Home button on iPhone, launch your streaming app.
The car still seems to think it's in the ConnectedDrive audio menu, as evidenced by the Entertainment details screen. You can now consistently play back any other audio service via your iPhone without the iPod audio overriding what you're doing. Good times! The only drawback so far is lack of ability to skip tracks via the steering wheel.
As long as you haven't started iPhone/iPod playback when you get in the car, you can often skip steps #1 and #2, and go straight into the ConnectedDrive menu, then go to step #3. Either way, following steps #1-3 works everytime.

IPhone 4 OS 7.1.2 doesn't turn off after notification

After I receive a text, email notification or missed phone call, the notification screen usually turns off after a few seconds. It's gotten to where about 40% of the time it just stays on until I manually hit the On/Off button. At first I thought it was because the phone was plugged up but it's also happening when it is unplugged.
Anyone else having this issue or know of a fix?

Try a reset first.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

15-r007TU-Display does not turn on when it automatically turns off after closing lid.

I just purchased hp 15-r007TU, Windows 8.1 x84. I'm facing a strange problem. After all initial setup, I put the laptop on to download and install all lates Windows 8.1 patches. The display is set to tuen off automaticaaly after 5 minutes. After 5 min it did turn off as set. But then I can not turn it back on. I pressed all (except power) keys, used touch pad, closed lid and opened but it stayed off. Laptop was on and running as I could see HDD lights flickering, I could hear system sounds on pressign mute/volume keys, also I could toggle WiFi with key. I then pressed power off key to turn Windows off normally. I did turn off. I again turned it on, I could see 'hp' logo with spinning wheel and then nothing. Display is off and I don't see start screen. I have to hard reset (press power button for more than 5 seconds) then display is normal. This happens every time the display turns itself off automatically after set time or I close the lid. Only after hard reset it works normally and I see the start menu.
The power settings I use are:
1. never put system to standby after preset time. (either on battery or AC power)
2. turn display off after 5 min. (both on battery or AC power)
3. when I close lid - do nothing. (both on battery or AC power)
4. when I press power button - shut down
I am using Windows 8.1 x64 with all latest patches installed. BIOS updated to lates available. All latest drivers installed.
I have not yet set password to the system to log in.
Help would be immensly appreciate. The device is still in warrenty if it needs to be replaced.

Hello K1200LT,
Welcome to the HP Forums!
I understand the computer will not sleep when you shut down the lid. You seem to have already done most of the troubleshooting I would've suggested.
To be honest, it is either a hardware or software-related issue. To determine this, I would like you to reinstall the operating system. It will clear up any software conflicts and allow you to start fresh.
First, please ensure you backup your files. Here is information on how to do this: Backing Up Your Files (Windows 8)
Once this is done, it is safe to reinstall the operating system. Performing an HP System Recovery (Windows 8)
If the same situation occurs, the computer likely has faulty hardware. At that point, please contact HP phone support. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know what happens. Thanks!
Mario
I worked on behalf of HP.

Call waiting gets turned off on its own.

i bought an iphone 4s . i am facing a problem that is my call waiting gets off on its own. even though i turn it on it gets turned off after few mins so plz could some1 help

You may want to contact your cellular service provider.

HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

Hello vijaypatel,
Thanks for the question. The following article outlines the temperature warning that you experienced:
iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
http://support.apple.com/kb/HT2101
If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
               - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
               - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
               - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
               - If the display turns on, go to step 4.
               - If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M.

My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off. But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.

I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help.

When i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

hi
... i have a similar problem
but just with the sleep botton.
fist use your adapter with other iphone/itouch ... is posible itś the problem
second .. let your phone charging
...normally if we conect our phone ... after some minuts it's put on.
after 2 hours ... trate to use it ... if after it your phone continue same... could be qaa electrical/physic problem
please if you have a guaranty use it.
im sorry but my english is terrible.

Show my caller id button turns off after setting att

Similar Messages

Maybe you are looking for