Show Network connections Charm in windows 8.1 app

Hi ,
Is there any API (code) to display the network charm directly from windows 8.1 App ?
like the Networks display appear when we click on the network icon on bottom right corner in desktop mode.

I don't know of any - why would you need this?
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Similar Messages

When I turn on my iPad 1it stops the network connection to my windows xp pro computer. Ican fix the network connection by repairing the windows machine network. What is the reason thia is happening?windows

When I turn on my iPad 1it stops the network connection to my windows xp pro computer. Ican fix the network connection by repairing the windows machine network. What is the reason this is happening?windows

Are you using DHCP to allocate IP addresses via your router or Static IP allocation?
You may have an IP conflict in your network.
Check on your various network configuration parameters in your iPad, PC and WiFi router.

Yoga Pro 2 - No network connections/WiFi after Windows 10 Upgrade

Windows 10 upgrade completed OK but no network adapters appear in Windows settings and no network connections available. Updated Intel 7260 drivers (v, confirmed device was working properly, download and installed Windows 10 WLAN update from Lenovo, checked WiFi was enabled in BIOS, checked Airplane mode was off, still nothing. IPCONFIG just comes up blank, No network adapters showing in Network Settings. Reverted back to Windows 8.1 after 6 hours. Any ideas, anyone?

Same problem here, tryed to get drivers from Intel page, which was launched 29/07/2015, and still doesnt work. Even tryed to plug network cable and still won't work. Dont want to roll back to win 8.1, so please help.

Canon IP1700 network connection to a windows pc how to?

I have a windows pc with an IP1700 connected to it, I want to allow my macbook to network print to the printer,
The macbook can see the ip1700 just fine, however, I does not have a driver for it.
I downloaded the diver for osx from canon, its not a driver but an install app. It works fine if i have the ip1700 connected direct to the mac, but when network connecting when its connected to the pc it demands a driver and I can not locate the driver file on my mac, I have tried to look in the package contents, no go. I looked in the printers folder of my home folder, no go. It will not work with a generic postscript driver. Im screewed.
Help!!!
Thanks

Ok, i got this to work by going to
www.printfab.net
I install the printfab application which has support for the ip1700
You can check and see if they have support for your printer.
Once its installed, you can use the windows printing tab to select your shared windows printer,
then go into the driver list and if your printer is supported it should be in there.
Please note you dont actually runt he printfab app, you just use the drivers that it installed for you for the printers it supports.
Hope this helps.

Network Connectivity Assistant in Windows 8.1

What happened to the Network Connectivity Assistant in Win8.1? In Win8 it would launch a "DirectAccess" dialog like the one in this blog:
http://blog.msgeneral.nl/2012/03/direct-access-connectivity-assistant-in.html
But in Win8.1 double-clicking and righ-clicking doesn't do anything:

As Richard points out you can only access the NCA via the following.
To access the DirectAccess connection properties in Windows 8.1, press
Window Key + I, click Change PC Settings, and then click
Network.
Highlight Connections and click Workplace Connection.
It is a step back for those that are used to the DCA or Win8 NCA.
Note: also you need to have a email client enabled on the client to get the logs.
Also there is the "Microsoft DirectAccess Client Troubleshooting Tool "
Regards
Regards, Rmknight

How can I get Expose to show only and all active windows, regardless of app

Sometimes I have two applications running with several finder windows hidden on the dock. I'd like to know how I can (or if I can) get Expose to show only the Active windows - not the ones on the dock. With this new upgrade, it seems that all open windows that are on the dock appear in a row at the bottom of the screen, which takes up real estate - can I turn that function off so just the open, undocked windows of all apps show?

Sounds like you opened a message in a new window. Have you tried closing that window and see what happens?
If that is not it maybe you can post a screen shot of what you are seeing.

Windows 8.1 Lock Screen drops network connectivity when screen locked using Win+L

Hi!
I was sent here from Microsoft Community forum. The question is:
Since Windows NT 4.0 I'm using Lock Screen to prevent people from accessing my computer when I'm leaving my room. First I was using CTRL+ALT+DEL / Lock Screen, then switched to Win+L keyboard shortcut when it was first introduced.
Everything was fine until I switched to Windows 8.1 computer (Sony Vaio Duo 13 with Broadcom wireless network controller). This machine is 8.1, not 8.0 upgraded to 8.1.
My problem is that when I hit Win+L combo the Lock Screen (with clock etc.) is displayed. Then, despite I have configured not to turn off display, the screen goes blank (after 30 seconds since lock) and network connectivity is cut off from desktop
apps (I suspect the system goes into Active Standby mode, because Modern UI apps like Tune-In radio keep working fine).
100% repeatable scenarios:
## Scenario 1 ##
1) Log in
2) Open desktop app that uses network connectivity. Outlook 2013 from Office365 subscription
3) Check that it has connected
4) Lock screen (Win+L)
5) Wait for 30 seconds (first incorrectly posted as few minutes) as screen goes black
6) Unlock screen (using password)
7) In right corner of Outlook app you will see "Unable to connect with Exchange server" and few seconds later it will reconnect sucessfuly
## Scenario 2 - the more annoying ##
1) Log in to Win 8.1 computer
2) Connect to it using SMB (in my case I wanted to transfer 30 GB of files from local hard drive C: to server) \\COMPUTER-NAME\c$ from Windows Server 2012 R2
3) Start copying files from computer to server
4) Lock the screen on computer
5) As soon as screen goes black server displays message "Lost connection to the resource. Try again?"
6) Unlock screen on the computer
7) Click "Try again" and it will continue copying files
My power settings are set to go into stand by after 5 hours and if I not lock the screen it doesn't go to sleep before 5 hours.
When I lock the screen using Win+L it goes into (probably Active) Standby mode.
Is there any way to prevent it from going to Active Standby when locking screen? I need the screen lock for security reasons but I don't want it to drop my network connectivity on remote desktops, file transfers and other desktop activities before 5 hour
timeout.
This issue is not related to more or less known wireless network connectivity problem that happens to many Intel Haswell computers. Mine doesn't exhibit those problems. I can easly push 100 - 200 GB of wireless data without network drops.
Computer information:
Sony Vaio Duo 13: SVD1322C5E
Intel Core i5-4200U
8 GB RAM
Windows 8.1 Pro 64-bit
Broadcom 802.11n SDIO network adapter
Originally posted at: http://answers.microsoft.com/en-us/windows/forum/windows8_1-networking/windows-81-lock-screen-drops-network-connectivity/099f16bd-b00d-4ba9-b833-48bf1d55ffe4
Best regards,
Sergiusz

Same issue here using Surface 3 Pro with either internal WLAN or MS USB LAN Adapter. I'm frequently used to keep open connections over SSH to some servers. On switching to lock screen explicitly by pressing Win+L or implicitly due to idle timeout all
connections to servers are lost. In addition, I don't get any notifications on incoming Skype messages (using Skype for desktop) when lock screen is active.
Neither NIC is showing "Power Management Tab" according to step 5 of instructions above.
Additionally observing USB LAN NIC seems to be kept active after activating lock screen, but traffic stops (according to its flashing light) when lock screen is switching off display. Blanking display doesn't seem to be adjustable in System Settings (Energy
Options accessed through Win+X).
Find attached log file of powercfg -energy -duration 300 ...
Log file is in German. It basically claims unset timeouts for deactivating display while running attached to power supply though lock screen is turning off displays within 1-2 minutes.
Energieeffizienzdiagnose-Bericht
Computername
KRITIAS
Überprüfungszeit
2015-01-10T15:07:47Z
Überprüfungsdauer
353 Sekunden
Systemhersteller
Microsoft Corporation
Systemproduktname
Surface Pro 3
BIOS-Datum
10/16/2014
BIOS-Version
3.11.0350
Betriebssystembuild
9600
Plattformrolle
PlatformRoleSlate
Netzbetrieb
true
Prozessanzahl
67
Threadanzahl
1319
Berichts-GUID
{1a168801-c189-46fe-811c-235e6bf2bd0d}
Analyseergebnisse
Fehler
Energierichtlinie:Verdunkelungszeitlimit ist deaktiviert (Netzbetrieb)
Der Bildschirm ist nicht so konfiguriert, dass er nach einer Zeit der Inaktivität verdunkelt wird.
Energierichtlinie:Standbyzeitlimit ist deaktiviert (Netzbetrieb)
Der Computer ist nicht so konfiguriert, dass nach einer Zeit der Inaktivität automatisch der Wechsel in den Standbymodus erfolgt.
CPU-Auslastung:Prozessorauslastung ist hoch
Die durchschnittliche Prozessorauslastung während der Ablaufverfolgung war sehr hoch. Das System verbraucht weniger Energie, wenn die durchschnittliche Prozessorauslastung sehr niedrig ist. Überprüfen Sie die Prozessorauslastung für einzelne Prozesse,
um festzustellen, welche Anwendungen und Dienste den größten Anteil an der Gesamtprozessorauslastung haben.
Durchschnittliche Auslastung (%)
45.31
Warnungen
Plattform-Zeitgeberauflösung:Plattform-Zeitgeberauflösung
Die standardmäßige Plattform-Zeitgeberauflösung beträgt 15,6 ms (15625000 ns) und sollte immer dann verwendet werden, wenn sich das System im Leerlauf befindet. Wenn die Zeitgeberauflösung erhöht wird, sind die Technologien zur Prozessorenergieverwaltung
möglicherweise nicht wirksam. Die erhöhte Zeitgeberauflösung kann auf eine Multimediawiedergabe oder Grafikanimationen zurückzuführen sein.
Aktuelle Zeitgeberauflösung (100-ns-Einheiten)
10007
Maximale Zeitgeberperiode (100-ns-Einheiten)
156250
Plattform-Zeitgeberauflösung:Ausstehende Zeitgeberanforderung
Von einem Programm oder Dienst wurde eine Zeitgeberauflösung angefordert, die kleiner als die maximale Zeitgeberauflösung der Plattform ist.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Energierichtlinie:Bildschirmzeitlimit ist lang (Netzbetrieb)
Der Bildschirm ist so konfiguriert, dass er nach mehr als 10 Minuten Inaktivität ausgeschaltet wird.
Zeitlimit (Sekunden)
900
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Verbundgerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_0250
Portpfad
1,2
Standbydauer (%)
14
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Surface Ethernet Adapter
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_07AB
Portpfad
1,1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
Generischer USB-Hub
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_05AC&PID_1006
Portpfad
1
Standbydauer (%)
5
USB-Standbymodus:Vom USB-Gerät wird nur selten in den Modus für selektives Energiesparen gewechselt.
Von diesem Gerät wurde während der Ablaufverfolgung nur unregelmäßig in den Modus für selektives Energiesparen gewechselt. Die Prozessorenergieverwaltung ist möglicherweise nicht möglich, wenn sich dieses USB-Gerät nicht im Modus für selektives Energiesparen
befindet. Dieses Problem verhindert jedoch nicht den Wechsel des Systems in den Standbymodus.
Gerätename
USB-Eingabegerät
Hostcontroller-ID
PCI\VEN_8086&DEV_9C31
Hostcontrollerspeicherort
PCI bus 0, device 20, function 0
Geräte-ID
USB\VID_045E&PID_0797
Portpfad
1,3
Standbydauer (%)
14
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
firefox.exe
PID
5968
Durchschnittliche Auslastung (%)
1.57
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\xul.dll
0.60
\Device\HarddiskVolume4\Program Files (x86)\Mozilla Firefox\mozjs.dll
0.27
\SystemRoot\system32\ntoskrnl.exe
0.16
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
System
PID
4
Durchschnittliche Auslastung (%)
0.59
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.24
\SystemRoot\system32\DRIVERS\igdkmd64.sys
0.12
\SystemRoot\system32\DRIVERS\avc3.sys
0.07
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
dwm.exe
PID
6264
Durchschnittliche Auslastung (%)
0.47
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.10
\Device\HarddiskVolume4\Windows\System32\dwmcore.dll
0.09
\SystemRoot\System32\drivers\dxgkrnl.sys
0.06
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
Skype.exe
PID
11008
Durchschnittliche Auslastung (%)
0.26
Modul
Durchschnittliche Modulauslastung (%)
\Device\HarddiskVolume4\Program Files (x86)\Skype\Phone\Skype.exe
0.11
\SystemRoot\system32\ntoskrnl.exe
0.05
\SystemRoot\System32\win32k.sys
0.04
CPU-Auslastung:Einzelner Prozess mit erheblicher Prozessorauslastung
Auf diesen Prozess ist ein erheblicher Anteil der Gesamtprozessorauslastung zurückzuführen, die während der Ablaufverfolgung aufgezeichnet wurde.
Prozessname
svchost.exe
PID
1528
Durchschnittliche Auslastung (%)
0.25
Modul
Durchschnittliche Modulauslastung (%)
\SystemRoot\system32\ntoskrnl.exe
0.16
\Device\HarddiskVolume4\Windows\System32\ntdll.dll
0.02
\SystemRoot\system32\drivers\ndis.sys
0.01
Informationen
Plattform-Zeitgeberauflösung:Zeitgeberanforderungsstapel
Der Stapel mit den Modulen, die für die niedrigste Plattform-Zeitgebereinstellung in diesem Prozess verantwortlich sind.
Angeforderter Zeitraum
10000
ID des anfordernden Prozesses
3476
Pfad des anfordernden Prozesses
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\ACC\Creative Cloud.exe
Aufrufender Modulstapel
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\d3d9.dll
\Device\HarddiskVolume4\Program Files (x86)\Adobe\Adobe Creative Cloud\CEF\libcef.dll
\Device\HarddiskVolume4\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll
Energierichtlinie:Aktiver Energieplan
Der derzeit verwendete Energieplan.
Planname
Ausbalanciert (OEM)
Plan-GUID
{381b4222-f694-41f0-9685-ff5bb260df2e}
Energierichtlinie:Energieplancharakter (Akkubetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Akkubetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:Videoqualität (Akkubetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Videoqualität und Energieeinsparung ausbalancieren
Energierichtlinie:Energieplancharakter (Netzbetrieb)
Der Charakter des aktuellen Energieplans, wenn das System im Netzbetrieb ausgeführt wird.
Charakter
Ausbalanciert
Energierichtlinie:802.11-Energierichtlinie für Drahtlosverbindungen ist "Maximale Leistung" (Netzbetrieb)
Die aktuelle Energierichtlinie für 802.11-kompatible Drahtlosnetzwerkadapter ist nicht für die Verwendung von Energiesparmodi konfiguriert.
Energierichtlinie:Videoqualität (Netzbetrieb)
Ermöglicht Windows Media Player, bei der Videowiedergabe die Qualität und die Energieeinsparung zu optimieren.
Qualitätsmodus
Für hohe Videoqualität optimieren
Systemverfügbarkeitsanforderungen:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.
Akku:Akkuinformationen
Akku-ID
1F11LGC_LGCX863568
Hersteller
LGC_LGC
Seriennummer
1F11
Chemie
LION
Langfristig
1
Versiegelt
0
Zyklusanzahl
33
Vorgesehene Akkukapazität
42157
Letzte vollständige Aufladung
44209
Funktionen der Plattformenergieverwaltung:Unterstützte Standbystatus
Mithilfe von Standbystatus kann der Computer nach einer Zeit der Inaktivität in einen Energiesparmodus wechseln. Der S3-Standbystatus ist der standardmäßige Standbystatus für Windows-Plattformen. Im S3-Standbystatus verbraucht der Computer nur die Energie,
die notwendig ist, um den Arbeitsspeicherinhalt zu bewahren und die Arbeit mit dem Computer schnell fortsetzen zu können. Sehr wenige Plattformen unterstützen den S1- oder S2-Standbystatus.
S1-Standbymodus unterstützt
false
S2-Standbymodus unterstützt
false
S3-Standbymodus unterstützt
false
S4-Standbymodus unterstützt
true
Funktionen der Plattformenergieverwaltung:Unterstützung von Verbindungsstandby
Mit dem Verbindungsstandby kann der Computer in einen Stromsparmodus wechseln, in dem er immer eingeschaltet und verbunden ist. Der Verbindungsstandby wird soweit unterstützt anstelle der Systemstandbystatus verwendet.
Verbindungsstandby unterstützt
true
Funktionen der Plattformenergieverwaltung:Die adaptive Bildschirmhelligkeit wird unterstützt.
Dieser Computer ermöglicht die automatische Helligkeitsregelung der integrierten Anzeige durch Windows.
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
0
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
1
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
2
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Funktionen der Plattformenergieverwaltung:Funktionen zur Prozessorenergieverwaltung
Mithilfe einer effektiven Prozessorenergieverwaltung kann der Computer Leistung und Energieverbrauch automatisch ausbalancieren.
Gruppieren
0
Index
3
Leerlaufstatus - Anzahl
11
Leerlaufstatustyp
Micro-Energiemodul-Plug-In
Nennfrequenz (MHz)
2301
Prozentuale maximale Leistung
100
Prozentuale niedrigste Leistung
32
Prozentuale niedrigste Drosselung
3
Leistungssteuerelementtyp
ACPI-Leistungszustände (P)/ACPI-Drosselungszustände (T)
Gerätetreiber:Erfolgreiche Analyse
Die Analyse war erfolgreich. Es wurden keine Energieeffizienzprobleme festgestellt und keine Informationen zurückgegeben.

Windows 7 Pro not finding network connections after boot camp installation. Is there something special we have to do to get the network (wired and wireless) set up?

Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?

tim-bob wrote:
Any suggestions for getting the network connections working on Windows 7 Pro running on a Mac Min with OSX Lion?
If you haven't yet installed the Windows Support Software, that's probably why, so install it now.

Lost Network Connections after installing new version of "Access Connection"

Few days ago, I downloaded through Lenovo System Update, the latest “Access Connections” for my X60. Since then unfortunately I lost all my network connections (i.e.: Wi-Fi and Ethernet connection) to the laptop. Can anybody help me restoring my connections?
I tried to Roll Back the Driver for 3945ABG but to no avail.
Any help will be appreciated.
Thinkpad X60
Windows XP Prof
Garokay

garokay, welcome to the forum,
if I understand your problem correctly, nothing showing in network connections, please have a look at the following link to an MS tip, it may hold the solution.
How to troubleshoot missing network connections icons in Windows Server 2003 and in Windows XP
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Restoring Network Connections Error

We are using the Lenovo IOMEGA IX2 NAS. We have around 10 users who connect to this network drive. One PC is able to connect to it but the others get a Restoring Network Connections Error:
Microsoft Windows Network: Insufficient system resources exist to complete the requested service.
This connection has not been restored.
Anybody else have this issue?

Hello jamescheung
The affected PC's do were they actually able to mount the share(s) at any point or are you getting this error while trying to mount the share(s)?
If they are able to mount, are you getting the error in explorer or a backup utility such as robocopy?
Do the affected computers experience the issue right after a PC reboot?
How many of the protocols are enabled on the ix2 and do you have media server and/or any of the active folder options enabled?
Have you tried to disable any non-critical protocols/features for troubleshooting?
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

We could not complete your itunes store request. the network connection timed out

Can anyone help me with this message? We could not complete your itunes store request. The network connection has timed out.

im not sure how this works but i seem to be getting that same message matter fact my ipad 1 went into recovery mode and all i was doing was playing a game and it showed that i had to connect to itunes did that and it said it had to update and i did that and upon the update it showed network connections timed out. tech support said to turn off firewall and anti virus and try again did that and it did the same thing. and im not sure what else im supposed to do. i can get it fixed threw best buy but the thing is paying 30 bucks ***** and you know i souldn't have to pay if itunes would fix there problem it's not my rouder and it's not my internet cause i have went to other peoples homes and tryind and get the sam ething so it has to be apple or itunes not sure which but wish they would fix the problem

"Network connection was reset" on attempting to subscribe to podcast

I tired to subscribe to podcasts tonight, and none of them work. When I click any of the 'subscribe' buttons, I get the error dialog reporting the following:
*We could not complete your iTunes Store request. The*
*network connection was reset.*
Make sure your network connection is active and try again.
Here I am posting to this forum, so there's nothing wrong with my network connection. What gives?
Update: Results of iTunes Diagnostics (Network connection only)
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer P5E-VM HDMI
iTunes 8.0.1.11
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.1.13
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number 6FD222D38545230E
Current user is an administrator.
The current local date and time is 2008-10-16 22:39:39.
iTunes is not running in safe mode.
Video Display Information
Intel(R) G35 Express Chipset Family
Intel(R) G35 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {48186A66-5926-4316-BF18-6A5FA169A05B}
Description: Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.0.108
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Wed Oct 15 06:55:08 2008
Lease Expires: Wed Oct 22 06:55:08 2008
DNS Servers: 192.168.0.1
192.168.0.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-10-16 22:36:35.
Message was edited by: aggieben

I was unable to download episodes from a season I purchased. It kept giving me the same "connection has been reset" error message. But I went and clicked on support under quick links in iTunes and it allowed me to start downloading from that screen. I didn't have to go into anything, it just automatically popped up that I had items to download and asked if I wanted to download them. I clicked on it, it prompted me for my password, and then started downloading them instantly.

ITunes could not connect to the iTunes Store. The network connection...

I was messing around with services and startup items a few days ago to try to get other software to work...I think I might have screwed up iTunes. I can't connect to the store anymore. I get the following error.
*iTunes could not connect to the iTunes Store. The network connection timed out.*
*Make sure your settings are correct and your network connection is active, then try again.*
Obviously, my network is working since I'm able to do this, play Warcraft and all sorts of other things. iTunes is the only thing having a problem. I made sure that Bonjure was enabled, but I don't know what other services/startup items iTunes needs. Here's my diagnostic
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
GBT_ AWRDACPI
iTunes 8.0.2.20
QuickTime 7.5.5
FairPlay 1.1.11
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.2.7
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number 7AB7EA306436**
Current user is an administrator.
The current local date and time is 2008-11-23 12:06:49.
iTunes is not running in safe mode.
Video Display Information
NVIDIA GeForce 6800 GT
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {979801BC-8557-4FD5-B9CE-1F8B35CA50AD}
Description: Belkin 54g Wireless USB Network Adapter #2 - Packet Scheduler Miniport
IP Address: <Edited by Moderator>
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Nov 23 11:12:54 2008
Lease Expires: Mon Jan 18 20:14:07 2038
DNS Servers: 192.168.1.1
192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
Last successful store access was 2008-11-21 14:18:20.

Here are the results of my Network Connectivity Test:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Computer Corporation Dimension 3000
iTunes 8.0.2.20
QuickTime 7.5.5
FairPlay 1.1.11
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.2.7
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number EDAEB******9F3
Current user is an administrator.
The current local date and time is 2008-11-23 21:20:58.
iTunes is not running in safe mode.
Video Display Information
Intel(R) 82865G Graphics Controller
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {3BE13BD2-D7B4-413A-8E47-5FB5B3B77A45}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 204.*****
Subnet Mask: 255.*******
Default Gateway: 204.*****
DHCP Enabled: Yes
DHCP Server: 10.84.160.1
Lease Obtained: Sun Nov 23 21:12:37 2008
Lease Expires: Mon Nov 24 20:10:41 2008
DNS Servers: 65.24.7.10
65.24.7.10
65.24.7.11
Adapter Name: {F4DF3241-174D-4A38-88C4-836CFF12964D}
Description: VMware Virtual Ethernet Adapter for VMnet1
IP Address: 192.********
Subnet Mask: 255.******
Default Gateway:
DHCP Enabled: No
DHCP Server: 255.*******
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {A674852C-473B-4006-A26D-4923734B78DB}
Description: VMware Virtual Ethernet Adapter for VMnet8
IP Address: 192.******
Subnet Mask: 255.******
Default Gateway:
DHCP Enabled: No
DHCP Server: 255.*******
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iTunes Store was unsuccessful.
The network connection timed out.
Secure connection attempt to iPhone activation server unsuccessful.
The network connection timed out.
Last successful store access was 2008-11-15 11:45:37.
<Edited by Moderator>

Incoming network connections message

I keep getting this message every time I open iTune, "Do you want the application "iTunes.app" to accept incoming network connections? I have set accept in security preferences, what is it all about? Thanks Alex

I have an even better solution for you. No uninstalling or re-downloading.
In security (located in system preferences) Click the firewall tab followed by the advanced button down the bottom. Check all the applications you want are set to allow incoming connections. Close security preferences. Then open a finder window Navigate to -> Macintosh HD -> Library -> there will be a file called, com.apple.alf.plist delete it, reboot and your done. Deleting this small file re-builds the Firewall preferences and you will no longer be asked to accept incoming network connection every time you open an app. As long as the app your opening is on the list in the firewall tab your good to go Email me at [email protected] if this worked for you

Apple Airport 802-11n connection problems with Windows 7

I'm basically a MAC user, but my son is trying to get his Windows 7 Toshiba laptop to connect to my Apple 802-11n wifi. It will see the wifi, but when clicked on my network the connection fails before I get to input the password. Yet neighborhood 802-11n connections get to the password screen. The lap[top is a Toshibe satellite L755-S5107 running Windows 7.
I'm not very savvy on PCs, so I don't know where to look for versions of his software et al.
Anyone familiar with such problems?

Toshiba may be doing something different than other manufacturers, so your best bet might be a Toshiba support site.
Official Toshiba Support | Toshiba
Another source that may of some help is the Windows troubleshooting guide for WiFi connections:
Wired and wireless network connection problems in Windows ...
Not sure how much more help that we can provide on an Apple support site for Apple wireless routers.

Show Network connections Charm in windows 8.1 app

Similar Messages

Maybe you are looking for